CTV User Guide
Contents
1. activated e If you have the Call Forwarding feature from your telephone company the unit will not display the Caller ID information while Call Forwarding is turned on e If you have Caller TV connected to a second phone line make sure that you have the Call Display service activated on that line as well e lf you get scrambled or erratic characters on the Television this usually indicates excessive static or noise on the phone line It is not a problem with the Caller TV unit unless every call is affected Caller TV may not display all calls depending on the data sent by the Telephone company The Telephone company may not always include the name and number of the caller due to the origination point of the call or the caller may block the Call Display For Technical assistance contact NetMedia Inc 1 520 544 4567 or visit our web site www caller tv com 12 Electromagnetic Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications User Instructions If the equipment does cause harmful interference to radio or television recept2. using this product to reduce the risk of electrical shock fire or injury e Read and follow all instructions e Unplug the unit from the telephone jack and wall outlet before cleaning Only use a damp cloth Do not use any liquid or aerosol cleaners e Do not use this unit near water e Do not drop unit Serious damage may result if the unit falls e Do not place anything on any of the cords Do not install the unit in a location where someone may step or trip on one of the cords e Do not overload wall outlets power strips or extension cords as it can result in the risk of fire or electric shock e Do not disassemble the unit Opening the product may expose you to dangerous voltages Incorrect re assembly of the unit may cause shock or short circuit damage when the power is applied 14 Netmedia Inc warrants the parts in this products against defects in materials or workmanship for a period of one year after the date of original retail purchase During this period Netmedia Inc will replace a defective part without charge to you You must deliver the entire product to NetMedia Inc You are responsible for all transportation for the product to and from NetMedia Inc The above warranty is subject to the following conditions e You must retain your bill of sale or provide other proof of purchase Completing and mailing the enclosed registration card within ten days of retail purchase is one way of providing proof of purchase e All w
3. 0 To be certain of the number of devices you may connect to your line as determined by the REN you should contact your local telephone company to determine the maximum REN for your calling area 13 If your telephone equipment causes harm to the telephone network the Telephone Company may discontinue your service temporarily If possible they will notify you in advance But if advance notice is not practical you will be notified as soonas possible You will be informed of your right to file a complaint with the FCC Your telephone company may make changes in its facilities equipment operations or procedures that could affect the proper functioning of your equipment If they do you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service If you experience trouble with this telephone equipment please contact NetMedia Inc 10940 N Stallard Place Tucson Arizona 85737 520 544 4567 Fax 520 544 0800 For information on obtaining service or repairs The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipmentis not malfunctioning No user serviceable parts are contained in this equipment This equipment may not be used on coin service provided by the telephone company Connection to party lines is subject to state tariffs IMPORTANT SAFETY INSTRUCTIONS Always follow basic precautions when
4. Caller ID on your TV User s Manual and Installation Guide Copyright 1998 NetMedia Inc All rights reserved Rev 061898 Thank you for your purchase of Caller TV You are now ready to enjoy the convenience of having your Caller ID information displayed on your Television After you have completed the installation of your Caller TV unit this is what is going to happen After the first or second telephone ring Caller TV places the name and number of the incoming call at the bottom of your TV in large easy to read letters Depending on the installation you choose Caller TV displays the caller s information on the top of a TV channel Picture In Picture PIP or with its own blue screen Caller TV is designed with your convenience in mind Once Caller TV is installed there are no buttons to push or remote controls to deal with Caller TV is designed to work with your existing Caller ID box Caller TV allows you to make an immediate decision on what to do with an incoming call Caller TV retains the information of the last call until a new call comes in A Hints section is associated with each Installation The Hints section explains how to display information on the last call Before you install your Caller TV box you will need to determine which installation is right for you This will depend on what kind of video equipment you have cable box VCR Satellite Receiver etc and how you want your incoming calls displayed Please read t
5. arranty servicing of the product must be made by NetMedia Inc e This warranty is effective only if the product is purchased and operated in the USA e Labor service charges for installation or repair of any other systems are not covered by this warranty e Warranty extends only to defects in materials and workmanship as limited above and do not extend to any product or parts which have been lost or discarded by you or to damage to products or parts caused by misuse accident damage caused by Acts of God such as lightning or fluctuations in electric power improper installation improper maintenance or use in violation of instructions furnished by NetMedia Inc or to units which have been altered or modified without authorization of NetMedia Inc All warranties implied by state law including the implied warranties of merchantability and fitness for a particular purpose are expressly limited to the duration s of the limited warranties set forth above With the exception of any warranties implied by state law as hereby limited the foregoing warranty is exclusive and in lieu of all other warranties guarantees agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of any product or parts In no event will NetMedia Inc be liable for consequential or incidental damages We do not warrant this product to be compatible with all types of telephone equipment or telephone services
6. his manual completely to find out what options you have for displaying your Caller ID information and then decide which installation works best for you Caller ID service or Call Display service must be activated by your telephone company for Caller TV to work Call your local telephone company to make sure you have this service activated to your home Caller TV is S Video compatible To install Caller TV using S Video you need to purchase the Caller TV S Video Adapter Kit CALLER TV PACKAGE CONTENTS 1 Caller TV Call Display Unit 1 Wall Transformer 1 Caller TV Users Manual and Installation Guide 1 RCA Video Connection Cable 1 RJ11 Telephone Connection Cable You may need additional cables ANTENNA VIDEO 1 AUDIO 1 of AUDIO 1 r Connecting Caller TV to Television FIGURE 1 Television with ANT CABLE connection only Check these Installations Installation with VCR Modulator and TV page 8 Installation with VCR and TV without video input page 9 Installation with Cable Box VCR modulator and TV page 10 VIDEO 2 ANTENNA AUDIO 2 S VIDEO 2 ANTENNA VIDEO 2 AUDIO 2 r FIGURE 2 Television with Video Inputs Check these Installations Installation with TV only page 4 Installation with VCR and TV page 5 Installation with Cable Box VCR and TV page 6 Installation with Satellite Receiver and TV page 7 FIGURE 3 Television with S Video input Check these Installat
7. ion which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from the circuit used by the receiver e Consult the dealer or an experienced radio TV technician for help Changes or modifications not expressly approved by NetMedia Inc could void the user s authority to operate the equipment Telephone FCC Part 68 This equipment complies with Part 68 of the FCC Rules On the side of this equipment is a label that contains among other information the FCC Registration Number and Ringer Equivalence Number REN for this equipment You must upon request provide this information to your telephone company This equipment uses RJ11 Jacks An FCC compliant telephone cord and modular plug are provided with this equipment This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is part 68 compliant See installation instructions for details The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all those devices ring when your telephone number is called In most but not all areas the sum of the REN s of all devices connected to one line should not exceed five 5
8. ions Installation with VCR and TV page 5 Installation with Cable Box VCR and TV page 6 Installation with Satellite Receiver and TV page 7 Note Caller TV is S Video compatible To connect Caller TV using S Video purchase the Caller TV S Video Adapter Kit 2 Caller TV Display Options Caller TV can create its own video source or blue screen Figure 1 If no video source VCR Satellite Receiver etc is plugged into Caller TV Caller TV creates its own video source This allows Caller TV to be the video input on a Television If a video source is turned off Caller TV also makes a blue screen with information about the last call You may use this feature to retrieve the last call at any time 1 28 12 00 AM NETMEDIA ING 520 5444567 FIGURE 1 Caller TV can display the Caller ID information on top of TV picture Figure 2 Plug a video source VCR Satellite Receiver etc into Caller TV and the Caller ID information will be displayed on top of the picture After a few seconds the caller s information will disappear from the screen To review the last caller s information turn off the video source to Caller TV VCR etc and the Caller ID information will reappear on the television FIGURE 2 Caller TV can be used with Picture In Picture PIP televisions Figure 3 Hook up Caller TV in blue screen mode to the video input on the television and your PIP will always display the last caller s info
9. l To view the last call turn the power to the VCR off ae ee 820 544 4567 INSTALLATION WITH CABLE BOX VCR MODULATOR AND TV NetMedia MODULATOR TELEVISION Tuned to channel 88 VIDEO AUDIO RF OUT CALLER TV UNIT wo N TELEPHONE LINE CABLE BOX CABLE TV SET TV TO CHANNEL 88 HINTS The TV channel must be tuned to the modulated channel Make sure the VCR is tuned to the Cable Box output usually channel 3 or 4 Use the Cable Box to change the channel To view the last call turn off power to the VCR 10 WHOLE HOUSE DISTRIBUTION OF CALLER TV YANIGNWOS NETMEDIA YALLMdS optional S VIDEO adapter kit EDIANINGY 154 4561 TELEVISION BIG SCREEN TV 11 TROUBLESHOOTING e The Cable Antenna Satellite system must be grounded Contact your local electrician satellite installer or electronics store for details e Make sure the Television is set to the proper Video Input to display the Caller TV information This depends on the installation you choose e Carefully check your wiring connections and make sure that they match the Installation e Make sure the power supply included with the Caller TV unit is plugged into an active power receptacle and connected to the unit e Make sure the Caller TV unit is connected to an active wall phone jack that has the Caller ID service activated Check with your phone company to ensure that your Call Display service is
10. rchase the Caller TV S Video Adapter Kit INSTALLATION WITH SATELLITE RECEIVER AND TV CALLER TV UNIT TELEVISION SATELLITE SET TV TO VIDEO 1 HINTS Set the Television to Video Input mode Use the Satellite Receiver to change the channel To view the last call turn the power to the Satellite Receiver off To connect Caller TV using S Video purchase the Caller TV S Video i DIA ING Adapter Kit 44 4567 INSTALLATION WITH SAT VCR DVD MODULATOR AND TV CALLER TV UNIT NetMedia MODULATOR TELEVISION VIDEO Tuned to channel 88 N OUT VIDEO AUDIO RF OUT o ngoo POWER TELEPHONE LINE CABLE TV SET TV TO CHANNEL 88 HINTS This installation allows you to distribute your video source and Caller ID information to multiple Televisions The television must be in ANT CABLE mode and tuned to the modulated channel to display the Caller ID information Refer to the Modulator instructions on setting up the modulator Use the Satellite Receiver to change the channel To view the last call turn off the power to the VCR DVD SAT RECEIVER INSTALLATION WITH VCR AND TV WITHOUT VIDEO INPUT TELEVISION VU N KPDS CALLER TV UNIT CABLE TV SET TV TO CHANNEL 3 or 4 HINTS To view the Caller ID information tune the VCR to its video input You will not be able to view the Caller ID information on any of the cable channels Use the VCR to change the channe
11. rmation FIGURE 3 INSTALLATION WITH TV ONLY CALLER TV UNIT TELEVISION TELEPHONE LINE CABLE TV SET TV TO VIDEO 1 HINTS To view your Caller ID information tune your Television to the Video Input Caller ID will not be displayed on the cable channels Information on the last call is always displayed when the TV is in Video Input mode This installation works well with Picture In Picture PIP televisions eee 520 944 4507 INSTALLATION WITH VCR AND TV TELEVISION e A O WW CALLER TV UNIT CABLE TV SET TV TO VIDEO 1 HINTS Set your TV to the Video Input mode Caller ID information will be displayed on all Cable Channels Use the VCR to change the channel To view information on the last call turn the VCR off To connect Caller TV using S Video purchase the Caller TV S Video Adapter Kit INSTALLATION WITH CABLE BOX VCR AND TV CALLER TV UNIT TELEVISION TELEPHONE LINE CABLE BOX OPTIONAL CONNECTION CABLE TV SET TV TO VIDEO 1 HINTS To view the Caller ID information on the TV select the Video Input mode Caller ID information is displayed on top of TV program Use the Cable Box to change the channel If you connect the Optional Connection you will not be able to view your Caller ID information if the TV is in the ANT CABLE mode To view the last call turn off the power to the VCR To connect Caller TV using S Video pu
Download Pdf Manuals
Related Search