REKE-85 eng
Contents
1. DI PSM TCH CHART FUCTION 1 2 3 4 5 6 7 8 9 10 0 X JX JX X FR PR YR X fl SOUND ACTIVE 1 X X X FR X X FX X AUTO MODE 0 SET DMX ADDRESS FOR DMX MODE 0 DMX SLAVE DIPSWITH CHART Channel Function Value Description 0 69 Close laser OFF CHI Mode 70 139 Sound active mode 140 209 AUTO mode 210 255 DMX mode 0 Stop running CH2 Running direction 1 150 Clock direction running 151 255 Counter clock direction running n 0 is slow 255 is speedy has ten grade CH3 Running speed ees speed D 0 is slow 255 is speedy has ten grade CH4 Twinkle speed R speed 0 69 Red 70 139 7 CH5 Color selection Green 140 209 Red green 210 255 Auto color DMX Control Parameter Chart Warning IA IA Power off before installation or maintenance The danger class of this laser lighting is CLASS III B it s dangerous for observing laser The safe minimum distance is 13cm the safe maximum time is 10 seconds IA flammable material Keep at least 0 5 meters distance between the lighting and2. Maintenance Please clean the lens regularly Do not do it using the wet cloth or other chemical the clean times is depend on the using frequency and surrounding condition it is recommended that should be cleaned every 20 days lt Please clean the lighting surface and engine outlet regularly Notices X Non professional do not dismantle or repair the laser lighting when there is a problem please inquire with the professional or contact with the local dealer X Do not exposure in the wet or dirty condition X Prevent the laser lighting from strong vibration or punch X Prevent other subject enter into the lighting X Ensure the fan is not blocked X Before power on be sure electric outlet is connected well with the socket X Do not turn on and turn off frequently avoid to turn on the power for a long time X Please power off the lighting for 15 minutes after running two hours ensure that the laser system is in well cooling state X Do not looking at the laser source using telescope X Do not touch the laser lighting by wet hand and forcefully pull the power line X The distance between lighting and casting medium should be more than 1 meters X When to be transported use the original package Laser show system User s manual Thanks for your purchasing please read this manual carefully before operating the system It gives you general information for your safe and better operation 85 INSPECTION Check for the cont
3. ents in the package refer to the following list 1 firefly twinkling laser lighting 1 2 3 PIN cable 1 3 User s manual 1 Installation 1 Firstly be sure that the using voltage is match with the voltage marked on the base of the laser lighting 2 Installation should be made by professional technician fix the laser lighting and adjust the angle of the laser lighting to you need 3 Be sure that there is no flammable or explosive subject nearby The least distance is 0 5 meters at the same time keep more than 15cm between the wall and laser lighting 4 Please check whether the fan and the exhaust is blocked 5 There is a hole for connection when hang the laser lighting be sure the cable can undertake 10 times of the lighting weight 6 The laser lighting should be fixed 7 Itis essential to be earthed well for the sake of safety Technical parameters 1 Laser diode DPSS green 532nm red 650nm LED high power high brightness whole color led RIW GIW BIW Power supply AC110V 220V 50 60Hz Laser power R100mw 50mw Motor N1 8 high precision step motor Control mode sound control AUTO DMX Dimensions 220mm x 210mm x 100mm Net weight 3 10KG Gross weight 3 50KG manual when using this laser the effection will be changed follow the eNAKRRYWN music when you change the sound and rhythm the machine will change its speed and direction E P EE e eeue enue eenses ess 0 OFF 1 ON X OFF or ON
Download Pdf Manuals
Related Search