USER MANUAL
Contents
1. NUMBER PLATE CAPTURE KAA 7 For optimum number p l plate capture please VE ae position the camera at a Er 38 10 on minimum height of 1 5m ja BR above the number plate O O A 7 and at an angle of re sss between 8 35 to the side of the number plate LED ADJUSTMENT The LED Adjustment contains adjusters for both brightness amp length of time the LED s are on for CURRENT This adjusts the brightness of the IR LED light LED ON This adjusts the time at which the LED s will come on minus adjustment for the LED to work only in darker conditions and plus to work in brighter conditions 300mm 11 81 319mm 12 56 219mm 8 62 100mm 3 94 97mm 3 85 85mm 3 35 40mm 1 57 SPECIFICATION Model Pick Up Device 1 3 Sony High Resolution CCD LED OLux 20 Pieces Super High Power LED ON OLux 60 Pieces IR LED ON S N Ratio gt 50dB Electronic Shutter 1 2 000s Lens 6 50mm Varifocal Auto iris IR Lens 9 22mm Varifocal Auto iris IR Lens White Balance AUTO Tracking Back Light Auto Gain Control Son Max Video Out put 1V p p 7592 Power Supply DC 12V 10 Current Consumption 200mA Max Dimension 319x219x100mm Weight 2 5Kg Storage Temperature 2 5Kg 30 60 C 22 140 F Operating Temperature 30 40 C 222. 104 F Design and specification are subject to change without notice OTHER CAMERAS IN THE AIR RANGE FROM CONCEPT PRO The AIR range includes a number of other housed Infra Red cameras for external use Please note that the cameras below are not Number Plate Capture cameras Extend the IR range up to PX 80m with AIR IR AIR15 Range 18 IR LEDs 420 TVL 520 TVL Options 3 6mm 6mm Fixed Lens Options 182 x 70 x 81mm WxHxD AIR30 Range 42 IR LEDs Varifocal Lens Options Service Video Output Option On Screen Display Option External Lens Zoom Adjustments 202 x 85 x 118mm WxHxD AIR45 50 Range 60 IR LEDs Varifocal Lens Options Service Video Output Option On Screen Display Option External Lens Zoom Adjustments 340 x 219 x 100mm WxHxD AIR IR It is possible to extend the IR range of the AIR 45 50 range with an easy to attach bolt on twin IR lamp The AIR IR twin lamp allows the camera unit to view up to 80m Concept X Pro Aa aaa
3. accessory contents in a safe place FIXING TO A WALL en Gx Pd H1 or 7 a oat 2 A 2 a iaa gt LK 1 OP A SS J O JEZ de Pe PES eZ A er ae e Use the supplied drill mounting template to mark the spacing for drilling Following drilling securely attach the bracket and camera to the wall MOUNTING TEMPLATE CONNECTION BNC CONNECTOR POWER CONNECTOR Connect the video out port to your video cable running to the monitoring recorder Check the power supply is of the correct level and connect your power supply into the power port on the Camera View the picture on a monitoring device to check the power and video connection is working properly Troubleshooting Ensure all power and cable connections are correct with the Camera DVR and Test monitor if used If all power and cable connections are correct and the camera picture can not be produced or configured then contact your supplier for technical support POSITIONING Point the Camera towards the intended area to be monitored EXTERNAL LENS ADJUSTMENT Open the lens adjuster cover and X Q fo Op adjust focus and zoom Loose the screw on the lens adjuster cover Lens Adjustment Tool Focus and Zoom Adjustments C Zoom Wide Narrow Focus Near Far
4. Concept Pro AIR20 60NPC Range Weatherproof Mono IR Camera USER MANUAL TECHNOLOGY CAUTION 10 Ti 12 13 14 This installation should be made by a qualified service person and should abide to all local codes In order to prevent electronic shock and or destroy waterproof seals do not loosen any screws on the camera body Adjust the sunshield cover to avoid exposure of direct sunlight on the lens Do not touch the front glass directly If necessary use a soft cloth moistened with alcohol to wipe off dust or debris Avoid installation on a surface subjected to frequent vibration or shocks Do not operate the camera beyond its temperature range or power source ratings Should any damage or suspected damage occur shutdown the power source unplug and contact your service provider Do not install the camera under unstable lighting conditions Severe lighting change or flicker can cause the camera to work improperly Never use the camera close to a gas or oil leak Do not disassemble the camera Do not drop the camera or subject the unit to physical shocks Never keep the camera face to strong light directly this can damage the CCD Ensure all removable covers are replaced to protect the inner components Do not install near devices which emit a strong electro magnetic field Use a dry or damp cloth only for cleaning PLEASE FOLLOW THE ABOVE CAUTIONS FAILURE TO DO SO MAY INVALIDATE THE WAR
5. RANTY OR CAUSE SERIOUS INJURY Remark Changes or modifications not expressly approved by the manufacturer can cause the camera to be damaged and become inoperable This may invalidate the user warranty The Concept Pro AIR20 60NPC range are weatherproof IR cameras suitable for number plate capture upto speeds of 112mph amp 28mph respectively El e Fixing Bolt for Sunvisor Mounting Bracket NJ 2 Photo Sensor Bracket Adjustment IR LED O External Lens Adjustment gt Sunvisor LED Adjustment 5 E PACKING CONTENTS j au uuun gt FIXING PLATE SS LOCATING SCREW WALL SCREW FIXING PLATE X4 a FE EASY FIT BNC CONNECTOR X1 BRACKET FIXING LENS ADJUSTMENT u PLATE SCREW COVER SCREW ALLEN KEY EASY FIT POWER CONNECTOR X1 X4 X1 X1 LENS ADJUSTMENT USER MOUNTING TOOL MANUAL DRAWING PAPER x1 x1 X1 INSTALLATION Important Ensure all cautionary procedures are observed during installation It is recommended the camera is tested during the most demanding environmental conditions such as low light or bright sunlight to ensure continuity of effective CCTV monitoring Remove the camera unit carefully from the box reserving the
Download Pdf Manuals
Related Search