novero Tour EN_v1_1
Contents
1. 10 3 Certification and Safety Approvals 10 3 1 Declaration of Conformity novero GmbH hereby declares that this NBHS 2 product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC A copy of the Declaration of Conformity can be found at www novero com declaration of conformity 10 3 2 FCC Industry Canada Notice This device complies with Part 15 of the FCC and Industry Canada rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Note Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 10 3 3 FCC Radiation Exposure Statement This equipment complies with FCC and Industry Canada radiation exposure limits set forth for an uncontrolled environment End users must follow the specific operating instructions for satisfying exposure compliance This transmitter must not be co located or operating in conjunction with any other antenna or transmitter FCC ID WAD BTHo10 IC 7847A NBHS2 This Bluetooth stereo headset supports Bluetooth Specification 2 1 with EDR Handsfree Profile 1 5 Headset Profile 1 1 Advanced Audio Distribution Profile 1 2 and Audio Video Remote Control Profile 1 0 Bluetooth stereo headset NBHS 2 Main2. novero Copyright 2011 novero All rights reserved novero Tour user guide V1 1 11 19 5 5 Music playback with novero Tour After pairing and connecting the headset to a Bluetooth mobile phone or Bluetooth music player you can enjoy your music with the headset Function Status of novero Tour Operation Volume up Playing music Short or long press VOL button Volume down Playing music Short or long press VOL button Pause Playing music Short press MFB button Play Pausing Short press MFB button Previous track Playing music Short press button once Next track Playing music Short press button once Note _ When playing music on some mobile phones the music will be transmitted to the mobile phone s speaker instead of the headset You have to select transmit the sound via Bluetooth in the settings menu and then choose novero Tour as speaker device The music will be transmitted to the headset Please refer to your mobile phone s user manual for further information When the volume is adjusted to max or min level you will hear a beep tone If you want to remote control previous next track pause play it requires from your mobile phone or music player to support the AVRCP profile Please refer to the user manual of your mobile phone or music player for further information Copyright 2011 novero All rights reserved novero novero Tour user guide V1 1 12 19 5 6 Making a call with
3. to connect the mains charger to the charging jack of the headset Alternatively connect the provided charging cable to a computer or laptop USB port The red LED is on while charging It takes about 2 5 hours to charge the battery When charging is completed the red LED is switched off Note While charging the novero Tour switches off and cuts the existing Bluetooth connections to your music player and mobile phone If you want to continue using it please turn it back on again with a long key press on the MFB The LED continuously shines red and flashes blue twice every 3 seconds 5 2 Wearing novero Tour The headband of your novero Tour is foldable and retractable please adjust according to the actual use The letter L of the headset represents left ear the letter R of the headset represents right ear Please wear your headset accordingly novero Copyright 2011 novero All rights reserved novero Tour user guide V1 1 8 19 5 3 Pairing novero Tour with Bluetooth devices Prior to using novero Tour you have to pair it with a Bluetooth enabled device e g mobile phone music player or PC laptop 5 3 1 How to enter pairing mode Function Operation LED indicator Indication tone Entering Ensure the headset is turned LED flashes red and Two short beep pairing off and then press and hold blue alternately tones mode MFB button for 5 to 7 seconds until LED flashes red and blue alternately Note Pairi
4. novero Tour After pairing and connecting the headset to a Bluetooth mobile phone you can use it for handsfree telephony Function Status of Operation Indication novero Tour tone Answer a call Incomingcall Short press MFB button A short tone ringing End a call During a call Short press MFB button A long tone Rejecta call Incomingcall Press and hold MFB button for 2 A short tone ringing seconds until hearing indication tone Redial last Standby mode Quickly press MFB button twice A short tone number Voice dial Standby mode Press and hold button for 2 A short tone seconds until hearing indication tone Volumeup During a call Short or long press VOL button Volume During a call Short or long press VOL button down Call transfer During a call Press and hold MFB button for 2 A long tone seconds until hearing indication tone Microphone During a call Quickly press MFB button twice 2 falling tones mute Cancel mute Duringamuted Quickly press MFB button twice 2 rising tones call Note _ Not all mobile phones support all functions as listed above Please refer to your mobile phone s user manual for further information When the volume is adjusted to max or min level you will hear a beep tone When pressing the answer button on some mobile phones the call will be transferred to the mobile phone You have to manually switch the call to the headset then Please refer to your mobile phone s user manual for further informati
5. Tour Bluetooth stereo headset User guide novero novero Tour user guide V1 1 2 19 Content is WEI COMM una NEEDS a aaa Aaaa a Eaa RER ENGENE here 3 Da WAUCOCMUCUION deicnsiciascscaeisieveicdeicenitbedvesicvescascetnscveavessevesedstevasebes osidbodes cutesdsd ostevesedeoveasdbed esidosevsdetaddvedvdssvecdessdveasebedveds A EMET HS een 5 Ai ROTO GSC ee ee ee ee 6 EM i RTRS N E E E A A E O T 6 42 Sales package Content esse 6 Be FHOW LO USE EE AE E E ode nspsasea ecudecbassuspsnuesha eda cecassesesbsespaeeusecneacndoueaes 7 5i Charging NOVero TOUR entalten la re error ser 7 52 Wearing NOvero Turnen Dein bahn 7 53 Pairing novero Tour with Bluetooth deveesnan RR 8 531 How toent r pairing Mode ea 8 5 3 2 Pairing the headset with a Bluetooth enabled mobile phone sss sssssssssssssssssssssssssseesssssssseserersssssssssseeeeee 8 53 3 Multi pairiN piesei ioi eta dt sed veed oaeaeei Ea Ea iaa 9 54 Turning on off novero Toll anne ee ae 10 5 5 Music playback with novero Tour nee ee 11 5 6 Making a call with novero TOUT ssssssssssssssssssssesseeeseeeeeeeeeeeeeeeeeeeeeesesessssssssssssssssnsnnnnunnneneeeeerrrrreereeeeeerereeeesssss 12 57 CEDiNdiCatOn enner RL IR 13 5 7 1 When the headset is CMAN BIE seen 13 5 7 2 When the headset is not CONNECtE cessessssessesseceesessssssssesecceesesssssesscsscsscsessssussucscceseesnsssessececseeaeenseaees 13 5 7 3 When the headset is connected to a Bluetooth deviCE seesssessess
6. ble and avoid using the headset in noisy environments where you may be inclined to turn up the volume If you need to adjust the volume do it slowly to avoid sudden unintended loud sounds If you experience discomfort or ringing in your ears stop using the headset immediately and consult a physician Continued use at high volume may accustom your ears to the sound level and result in permanent damage to your hearing without any noticeable discomfort Be cautious about wearing your headset while engaging in any activity that requires your full attention Remove or turn off your headset to keep you from being distracted and avoid accidents Using your stereo headset while operating a motor vehicle motorcycle watercraft or bicycle may be dangerous and is illegal in some jurisdictions Please respect local laws If you use a pacemaker hearing aid or other electronic medical device please consult your physician before using the headset Never try to dismantle the product yourself None of the internal components can be replaced or repaired by users Only authorized dealers or service centers may open the product If any parts of your product require replacement for any reason including normal wear and tear or breakage contact your dealer Keep out of reach of children The plastic bags which this product and its parts are wrapped in are not toys for children The bags themselves or the many small parts they contain may cause choki
7. dard of short range radio communication technology for the purpose of high transmission rate among mobile phones computers printers PDAs and other devices See also Glossary entry for Bluetooth chapter 9 You can enjoy your music wirelessly and make phone calls by using your novero Tour It has the following features 1 Pairing with a Bluetooth mobile phone or PDA supporting HFP profile Answer a call end a call and reject a call Redial last number Voice dial if supported by your mobile phone Adjust the volume Call transfer between the headset and your Bluetooth mobile phone _ Microphone mute Pairing with a Bluetooth music device supporting A2DP profile _ Enjoy music wirelessly _ Adjust the volume _ Remote control pause play _ Remote control previous next track Switch easily between call and music you will not miss the incoming call while listening to music When the headset is turned on it will automatically connect to the last connected device Note Even though the paired device and the headset support the same Bluetooth profiles functions may vary due to specification and version differences of the paired devices novero Copyright 2011 novero All rights reserved 3 SAFETY novero Tour user guide v1 1 5 19 Using novero Tour Turn the volume down to its lowest level Then put the headset on and slowly adjust the volume to a comfortable level Keep the volume at the lowest level possi
8. e of the PC laptop What to do when my mobile phone cannot search and find the headset The mobile phone will not find the headset if the headset and mobile phone are not under the pairing mode Make sure the headset is under the pairing mode and in the effective working range and then the headset can search for it Why can t I hear the voice from the headset 1 Make sure the headset is turned on 2 Ensure the volume of the headset and the mobile phone is not too low 3 Make sure the headset connects well with your mobile phone 4 Ensure the distance between the headset and your mobile phone is in the normal working scope Why is there no voice when making a call with the headset 1 Make sure your mobile phone is in the strong signal area 2 Ensure the headset is in the function range Why can t I remotely control the pause play previous track and next track functions with the headset when playing music This function requires a Bluetooth device with the AVRCP Audio Video Remote Control Profile profile Please make sure your mobile phone or Bluetooth music player supports the AVRCP profile novero Copyright 2011 novero All rights reserved novero Tour user guide V1 1 16 19 8 TECHNICAL SPECIFICATIONS Bluetooth specification Bluetooth V2 1 EDR Bluetooth profiles HSP v1 1 HFP v1 5 A2DP v1 2 and AVRCP v1 0 Operating distance 10 meters Class II Battery Built in rechargeable Li lon battery Working times M
9. e the headset out of direct sunlight and extreme temperatures above 45 C 113 F or below 10 C 14 F as this may shorten the battery life affect the operation or degrade the performance of your headset Do not dispose of the headset in a fire as it might result in an explosion Do not expose the headset to contact with sharp objects as this will cause scratches and damage Do not let the headset fall down onto the floor The internal circuit might get damaged Do not attempt to disassemble the headset as it might get damaged In case the headset does not function properly consult your dealer for further assistance For more support visit us at www novero com novero Copyright 2011 novero All rights reserved 7 FAQ novero Tour user guide v1 1 15 19 How far is the effective range between the headset and the Bluetooth device According to the Bluetooth standard the maximum controllable range of Class II headset is 10 meters It varies under different conditions Why does the red LED flash The headset battery is in low power status it needs to be recharged Why is the red LED not on while charging 1 Please make sure the charger connects well with the headset 2 When you didn t use the headset for a long time the battery might be drained In this case you have to charge the battery for 30 minutes and then the red LED will be on 3 Charging via PC or laptop might be interrupted due to standby mod
10. evices Bluetooth devices will not work together if they have not been paired Password or PIN is the code required to pair a Bluetooth device e g a mobile phone with your headset Standby is the mode where your headset is turned on paired and ready for outgoing or incoming calls When a call is ended the headset automatically returns to standby mode novero Copyright 2011 novero All rights reserved novero Tour user guide v1 1 17 19 10 APPENDIX 10 1 Disposal Dispose of all product parts in accordance with local regulations If in doubt please consult your local authorities The battery of the headset needs to be recycled Do not attempt to replace the built in battery in your headset The crossed out wheeled bin means that within the European Union the product must be taken to separate collection at the product end of life Do not dispose of these products as unsorted municipal waste For recycling companies only To remove the headset battery open the left side of the device with a screw driver and cut off the wires from the battery Remove the battery and dispose of it in a battery disposal bin 10 2 Warranty novero offers a limited manufacturer s warranty of 12 months from the date of purchase Users are not allowed to make changes or modify the device in any way Changes or modifications will void the warranty novero Copyright 2011 novero All rights reserved novero Tour user guide V1 1 18 19
11. n turn on the Bluetooth music device for multi connection For mobile phones that support the HFP and A2DP it may sets up the HFP and A2DP connection with the headset simultaneously At this time the Bluetooth music device will not connect to the headset novero Copyright 2011 novero All rights reserved novero Tour user guide v1 1 5 4 Turning on off novero Tour Function Operation LED indicator Turningon Press and hold MFB button Blue LED is on for 1 for 3 to 5 seconds until blue second LED flashes Turning off Press and hold MFB button Red LED is on for for 3to 5 seconds until red second LED flashes 10 19 Indication tone A long beep tone A long beep tone Note In order to save power the headset will automatically turn off if no device can be connected after 5 minutes Every time novero Tour is turned on it will automatically connect to the last connected device When the headset is in standby mode and doesn t connect to any device short press MFB button twice it will automatically connect to the last connected device Note The headset only automatically re connects to the last connected HFP device function of the device Before connecting to a Bluetooth device please turn on the Bluetooth With some Bluetooth phones you have to allow automatic connecting in the mobile phone s Bluetooth settings Please refer to your mobile phone s user manual for further information
12. ng if ingested ACA TSo28 Ignition of flammable atmospheres Do not use your stereo headset in environments with risk of ignition of flammable gases novero Copyright 2011 novero All rights reserved novero Tour user guide V1 1 6 19 4 BEFORE USE 4 1 Overview AON Previous track Multi function button MFB Next track LED indicator Headband Folding and retractable headband Right loudspeaker Left loudspeaker Microphone 10 Charging jack m e Volume up 12 Volume down 4 2 Sales package content The novero Tour comes along with these useful accessories _ Mains charger depending on sales package variant _ The provided charging cable is specific for the use with novero Tour in order to charge the battery Data applications are not supported _ Charging cable _ Velvet carrying pouch _ Ear pads rT Note _ The mains charger is only included in certain sales package variants gt Copyright 2011 novero All rights reserved novero Tour user guide v1 1 7 19 5 HOW TO USE 5 1 Charging novero Tour novero Tour comes with a built in rechargeable battery Prior to using it for the first time it is recommended to completely charge the battery When the headset is in low power status the red LED flashes twice and the headset emits three tones every 20 seconds Please recharge the battery of the headset Connect the mains charger to a standard power outlet Use the provided charging cable
13. ng mode will last 2 minutes If the headset still cannot pair with any Bluetooth device after 2 minutes it will automatically return to standby mode in order to save power 5 3 2 Pairing the headset with a Bluetooth enabled mobile phone The pairing procedures are specific for different mobile phone models and brands Please refer to your mobile phone s user manual for further information The general pairing procedure is as follows 1 Make sure the mobile phone and the headset are within Bluetooth range i e not more than 1 meter apart 2 Enter the headset s pairing mode please refer to chapter 5 3 1 How to enter pairing mode 3 Activate your mobile phone s Bluetooth function and set your mobile phone to search for Bluetooth devices After the search is completed select the novero Tour from the Bluetooth device list 4 According to the indication enter password or PIN No 0000 and press yes or confirm 5 After successful pairing select novero Tour in the Bluetooth device list and press connect 6 After successfully connecting the blue LED flashes twice quickly every 5 seconds Note _ If pairing fails please turn off the headset first and then re pair according to steps 1 to 6 mentioned above _ After pairing is successful the headset and the mobile phone will remember each other and there will be no need to re pair next time novero Copyright 2011 novero All
14. on novero Copyright 2011 novero All rights reserved novero Tour user guide V1 1 5 7 LED indicator 5 7 1 When the headset is charging LED indicator Red LED is on Red LED is off 5 7 2 When the headset is not connected LED indicator LED flashes red and blue alternately Blue LED flashes once every 3 seconds Red LED flashes once every 3 seconds 13 19 Status of novero Tour Charging in progress Charging finished Status of novero Tour Pairing mode Standby mode Low battery power 5 7 3 When the headset is connected to a Bluetooth device LED indicator Blue LED flashes twice every 5 seconds Blue LED flashes twice every 4 seconds Blue LED flashes once every 2 seconds Red LED flashes twice every 5 seconds 5 8 Indication tones Indication tone Emits 2 tones every 5 seconds Emits 3 tones every 20 seconds Status of novero Tour Standby mode Incoming call During a call Low battery power Status of novero Tour During a call Microphone mute Low battery power novero Copyright 2011 novero All rights reserved novero Tour user guide V1 1 14 19 6 MAINTENANCE AND CARE Read the following recommendations before using your novero Tour Following these you will be able to enjoy the product for many years Do not expose the headset to liquid moisture or humidity to avoid the product s internal circuit being affected Do not use abrasive cleaning solvents to clean the headset Stor
15. rights reserved 5 3 3 Multi pairing novero Tour user guide V1 1 9 19 Every time the headset is turned on it will automatically connect to the last connected device If you want to pair it with other devices please turn off the Bluetooth function of your last connected devices first and pair the headset with the new device according to steps 1 to 6 mentioned above If the Bluetooth version of your mobile phone is V2 1 or above there is no need to enter the pairing password when the headset pairs with your mobile phone The headset can be connected with two devices at most One is a Bluetooth mobile phone supporting HFP profile the other one is a Bluetooth music device supporting A2DP profile If you want to use multi pairing please refer to the following steps 1 Firstly pair the headset with a music device 2 Disconnect the music device e g turn off the music device Pair and connect the headset with the Bluetooth enabled mobile phone please refer to chapter o Pairing the headset with a Bluetooth enabled mobile phone 3 Turn on the music device again it will automatically connect to the headset Note _ After successful multi pairing the paired devices will remember each other Unless the pairing information is deleted because of new pairings there is no need to pair next time If the pairing information is deleted please make the mobile phone and the headset to set up a hands free connection first and the
16. s charger NACM 2 Europe or NACM 3 US The availability of particular products may vary by region Please check with your novero dealer nearest you Unauthorized changes or modifications to this device may void the user s authority to operate the equipment Export controls This device may contain commodities technology or software subject to export laws and regulations from the US and other countries Diversion contrary to law is prohibited novero Copyright 2011 novero All rights reserved novero Tour user guide v1 1 19 19 10 4 Trademarks Bluetooth is a registered trademark of Bluetooth SIG Inc Reproduction transfer distribution or storage of parts or all of the contents in this document in any form without the prior written permission of novero is prohibited novero is a registered trademark Other product and company names mentioned herein may be trademarks or trade names of their respective owners novero products are trademarks or registered trademarks of novero GmbH Copyright 2011 novero All rights reserved www novero com Copyright 2011 novero All rights reserved novero
17. serssssseesseserssssseressssereessseeeessssereess 13 58 lndicationtonesemensneen r e ra a ae a elissliln ea hin aose d eeir a ear EEE 13 6 Maintenance and care kn a er E ieie E st at 14 7 FAO innen an 05585555 SEES EEN SESS SEES ESS SES ESE ENDE SEES SEE SEE DSE S NESS ERNE SEES SEES SES dunaladubdnalakahadalanales 15 amp Technical specifications ns 16 Gi NOS SAU A PE EN E E ehe 16 DOS 1 l E EE EE E E E E A E ee es 17 1041 Dis pos een sa 17 18 2 NVA AINUY es 17 10 3 Certification and Safety Approvals nenn en 18 10 3 1 Declaration of ConforMity ee trete eier te er ee ee et nn nee eats eee ee 18 19 32 FCC lndustry Canada Notice sense 18 10 3 3 FCC Radiation Exposure Statement csssssssssscsssssssssessessccecsessssssssssscsecsessessssussscsscseesesassessecsecceeneeneeneeses 18 10 4 Trademarks au Mi cel ass2eccanselaasanssleasected avsavetucesesudesssastlunsenssdes deansdvedsenssantsatvoesdvesteonsssanlententevers 19 Copyright 2011 novero All rights reserved novero novero Tour user guide V1 1 3 19 1 WELCOME Congratulations on choosing Tour the universal Bluetooth stereo headset by novero Please read this user guide carefully before use novero Copyright 2011 novero All rights reserved novero Tour user guide V1 1 4 19 2 INTRODUCTION novero Tour is a universal Bluetooth stereo headset Due to its foldable and retractable design it is very easy wearable and portable Bluetooth is a stan
18. usic Up to 5 hours Talk Up to 6 hours Standby time Up to 120 hours Charging input voltage DC 5 0 0 25 V Charging time Approx 2 5 hours Dimensions 158 x 148 x 26mm Weight Approx 40 g 9 GLOSSARY Bluetooth is a radio technology that connects devices such as mobile phones and headsets without wires or cords over a short distance approx 10 meters 33 feet Bluetooth is safe to use and secure too Once two Bluetooth devices have been paired no one can listen in and no other Bluetooth devices can interfere Get more information at www bluetooth com Bluetooth profiles are the different ways that Bluetooth devices communicate with other devices Bluetooth phones support the headset profile the handsfree profile or both In order to support a certain profile a phone manufacturer must implement certain mandatory features within the software of the phone Idle not paired is the mode where your headset is turned on but not paired to a Bluetooth enabled mobile phone LED is short for light emitting diode and refers to the light indicator of your headset that sends different red or blue signals depending on specific actions events or modes Multipoint allows you to pair and connect your headset to two mobile devices at the same time and use one device as primary device with all regular options available and the other as secondary device with restricted options Pairing creates a unique and encrypted connection between two Bluetooth d
Download Pdf Manuals
Related Search