Netti 4U comfort|CE usEr manual
Contents
1. N etti 4U comfort CE ALU REHAB Thinking ahead moving forward C This product conforms to 93 42 EEC for medical products f F 9 1 INTRODUCTION 4 1 1 Areas of use indications for Netti 4U comfort CE 5 1 2 Contraindications 5 1 3 Quality and durability 5 1 4 Environment and waste disposal 5 1 5 Information for re use 6 1 6 About this manual 6 1 7 Vital measures 7 2 QUICK REFERENCE 8 3 DESCRIPTION 9 4 FEATURES OF NETTI 4U COMFORT CE 10 5 ACCESSORIES 11 5 1 Assembly of Hip Belt 11 6 ASSEMBLING AND ADJUSTMENT 12 6 1 Unpacking 12 6 2 Main wheel 12 6 3 Front castors 12 6 4 Seat height adjustment 12 6 5 Back rest 13 6 6 Seat depth adjustment 14 6 7 Anti tip 14 6 8 Seat cushion 15 6 9 Foot support 15 6 10 Head support 18 6 11 Arm support 19 2 Language English Model Netti 4U comfort CE Version November 2010 6 12 Adjusting the brakes 20 6 13 Seat angle tilt 22 6 14 Back rest angle 22 7 MANOEUVERING THE WHEELCHAIR 23 7 1 General about driving and parking 23 7 2 Driving techniques Step up 23 7 3 Driving techniques Step down 23 7 4 Driving techniques Slope 24 7 5 Driving techniques Up stairs 24 7 6 Driving techniques Down stairs 25 7 7 Transfer 25 7 8 Lifting the wheelchair 26 7 9 Push rim 27 8 TRANSPORT 27 8 1 Folding for transport 27 8 2 Transporting in car 27 9 MAINTENANCE 28 9 1 Maintenance instruction2. zi Language English Model Netti 4U comfort CE Version November 2010 A Don t leave a user in the wheelchair when it is tilted forward 7 MANOEVRING 7 1 General techniques The weight and balance of the chair influences the manoevring qualities of the wheelchair The weight size and sitting position of the user are also influencing factors The position of the wheels will in addition influence the manoevring qualities The more weight placed over the main wheels the easier it is to manoevre If heavy weight is placed over the front castors the chair will be heavy to manoeuvre Companion If the user is left alone in the wheelchair always lock the brakes and check that the anti tips are turned down Parking Increase the underneath support of the wheelchair by moving the chair about 10 cm rearwards making the front castors turn forward 7 2 Driving techniques Step up Companions drive up a step forwards e Check that the anti tip is turned up e Angle the wheelchair backwards e Balance the chair on the mainwheels and push it forward until the front castors are on the step e Lift the push handles while pushing the chair onto the step Turn the anti tip downwards Users drive up a step backwards This technique is only useful if the step is very low It also depends on the clearance between the foot plates and the ground e Check that the anti tip is turned up e Drive the chair b
3. J check tre wear S As a rule of thumb use oil on movable parts and all bearings Alu Rehab recommends use of ordinary bicycle oil 9 2 Cleaning and washing 1 Remove seat cushion before washing the wheelchair 2 Clean cushion and cover according to instructions printed on cushions Cushion cleaning procedures om Taito cave oe OUTER COVER Machine wash 60 C Tumble dry max 85 C ee Air dry standing edgewise 3 Clean frame using water and a rag 4 If jet water washing avoid pointing directly towards gas springs labels and back cushion 5 We recommend using soft soap 6 Wash the wheelchair well using clean water to remove all the soap 7 Use methylated spirit to remove any dirt left 28 Language English Model Netti 4U comfort CE Version November 2010 OD We recommend washing the wheelchair in washing chamber at gt 85 C For small damages to the surface original surface paint can be ordered from the manufacturer 10 TROUBLESHOOTING Symptom Reason Action Reference in manual The wheelchair The main wheel hubs might be incorrectly mounted is going askew e One of the brakes might be too tight e The user is sitting very askew in the chair e The user might be stronger on one side than the other The wheelchair The main wheel hubs might be incorrectly mounted is heavy to e Clean the front castors and forks for dirt manoeuvre e Too much weight over the front castors T
4. a slope A Always drive as straight as possible A It is better to ask for assistance than taking risks Driving uphill Move the upper part of the body forwards in order to maintain the balance of the chair Driving downhill Move the upper part of the body backwards to maintain balance of the chair Control the speed of the chair by clutching the push rims Do not use the brakes 7 5 Driving techniques Up stairs A Always ask for assistance A Never use escalators even if assisted by a companion With assistance backwards e Check that the anti tip is turned up e Pull the wheelchair backwards to the first step of the stairs e Angle the wheelchair backwards on the main wheels e Pull the wheelchair slowly up the stair one step at the time keeping the balance on the main wheel e Reaching the top of the stair pull the wheelchair backwards far enough to put the front castors safely down on the floor Turn the anti tip downwards If two companions are present one person can assist lifting in the front of the frame ZS Do not lift the wheelchair holding onto the foot supports ZS Do not lift the wheelchair holding onto the arm supports The companions should use the strength in their legs carrying the chair avoiding unnecessary stress on the back 24 Language English Model Netti 4U comfort CE Version November 2010 7 6 Driving techniques Down stairs A Never
5. and applying the brake The wheelbase in drum brake is fitted with hand operated hub brakes to allow regulation of speed on hills and whilst travelling along These are located on the push handles e To apply the brakes pull the brake levers 1 evenly and smoothly towards handle and bring the wheel base to a stop e For to put on and lock the parking brake 2 press the lever 1 against the push handle and lock the parking brake with the finger Be sure that both parking brakes are locked e The parking brake will be released when you press the lever 1 against the push handle It is locked with a spring and this will in this way be released It is extremely important that the parking brakes are locked when the user is left sitting in the wheelchair Ls Don t leave the user in the wheel chair wihout to put the parking brake in function 6 13 Seat angle tilt The seat angle is regulated using the release handle mounted on the push bow The seat unit can be tilted from 5 to 20 6 14 Back rest angle The back rest angle is regulated using the release handle mounted on the push bow The angle can be regulated from 90 to 135 To ensure correct function of the wires these must never be taut The seat and back rest angle must not be adjusted without using the anti tips The release handles have the following labels Recline Tilt Risk for tipping Check the position of anti tip
6. bushing 21074 The angle of the straps should be 0 45 S Netti 4U comfort CE has been crash tested without any power kit etc If at a later point of time a power kit stair climber etc is mounted this must be dismounted if the wheelchair is to be transported 27 9 MAINTENANCE 9 1 Maintenance instructions The Netti chairs are built of modules Alu Rehab carries stock of all parts and is ready to supply these on short notice Necessary instructions for mounting will follow the parts Parts to be handled by user are defined in spare part catalogues that can be downloaded at www alurehab com These parts can if needed also be removed and sent to manufacutrer distributor upon request Parts related to wheel frame construction must be handled by manufacturer or authorized sercvice facility You can order original paint from Alu Rehab to repair scratches and minor damages to the paint Please contact your dealer to order A If defects or damages occur please contact your dealer A Check re adjust screws and nuts at regular intervals Sand and sea water salt used for gritting in the winter can damage the bearings of the front castors and main wheels Clean the wheelchair thouroughly after use Check defects damages E g breakage missing X parts wasningorwneeeter QN Tong of bearing ME Washing of cushions NN check anti tip function ME check brake adjustment
7. into the black plastic lock attached to the extractable adjustment bar Swing it in and push down III 6 9 1 III 6 9 1 Adjusting the angle Universal foot support e The angle of the foot support can be adjusted using the star wheel in center of the hinge point III 6 9 2 e Loosening this star wheel enables you to adjust the foot support to the required angle e Fix the angle by tightening the star SCrew III 6 9 2 Adjusting the angle Angle adjustable foot support e The angle of the foot support can be adjusted using the star wheel in III 6 9 3 e Loosening this star wheel enables you to adjust the foot support to the required angle e Fix the angle by tightening the star wheel IIl 6 9 3 A Squeeze hazard When adjusting foot supports in angle do not put the fingers in the adjusting mechanism between the moving parts III 6 9 4 Adjusting the length of the foot support e Untighten the screw A ill next page to make the adjustment tube move e Adjust the foot support in required position and fix the screw properly 16 Language English Model Netti 4U comfort CE Version November 2010 I11 6 9 5 Adjusting the angle of the footplate e The foot plates can be adjusted in angle e Untighten the screw B and adjust the foot plate to the required angle Fix the screw properly K 5 mm Allen key Ill 6 9 6 Locking and releasing the foot plates e The foot plates c
8. use escalators even if assisted by a companion With assistance forwards e Check that the anti tip is turned up e Drive the wheelchair forward to the first step of the stair e Angle the wheelchair backwards on the main wheels e Have a firm grip on the push bow and keep the balance on the main wheel taking one step at the time e Reaching the bottom of the stair put the front castors safely down on the floor A turn the anti tip downwards If two companions are present one person can assist lifting in the front of the frame ZS Do not lift the wheelchair holding onto the foot supports ZS Do not lift the wheelchair holding onto the armrests 7 7 Transfer Techniques for transfering to from the wheelchair should be practiced well with the persons involved Here we give some important advices for preparation of the chair With or without companion sideways Before transfer e The wheelchair should be placed as close as possible to the destination of the transfer e Pull the wheelchair backwards 5 10 cm in order to make the front castors turn forward e Lock the brakes e Remove foot support and arm support on the side of the transfer With or without companion forwards Before transfer e The wheelchair should be placed as close as possible to the destination of the transfer e Pull the wheelchair backwards 5 10 cm in order to make the front castors turn forward e Lock the brakes e Tilt
9. 2 2 Il 6 11 4 20 Language English Model Netti 4U comfort CE Version November 2010 bici RP E e To reposition the brake loosen the two screws on the inside of the brake clamp III 6 12 3 e Adjust the brake position and tighten the screws Ill 6 12 3 e For fine adjustment loosen the upper screw on the inside of the brakes Ill 6 12 4 e Adjust the brake position and tighten the screw Il 6 12 4 K 5 mm Allen key Check that the brakes are correctly adjusted by activating the brakes and be sure that the wheelchair doesn t move The brakes are constructred as parking brakes and shall not be used as driving brakes Be aware of potential squeeze hazard between brake and tyre Drum brake If the wheelchair is mounted with 12 or 16 main wheels these will be equipped with drum brakes If the brake doesn t brake properly To adjust the wire on one or both sides adjust the foot screw 2 4 rounds out Then recheck the brakes If the wire is too loose Adjust the foot screw all the way in Tighten the wire by loosening the wire clamp before pulling the wire further through it Tighten the wire clamp and adjust the foot screw out again K 1 pc 10 mm open end spanner A To ensure the correct functions of the wire these must never be taut Language English Model Netti 4U comfort CE Version November 2010 21 f F MM _n__s Operating
10. ackwards towards the step e Make a firm grip on the push rims and move the body forward while pulling Turn the anti tip downwards Companions drive up a step backwards e Check that the anti tip is turned up e Pull the chair backwards next to the step e Angle the wheelchair backwards moving the front castors slightly up in the air e Pull the wheelchair up the step and go backwards long enough to put down the front castors on the step Turn the anti tip downwards 7 3 Driving techniques Step down Companions drive down a step forwards e Check that the anti tip is turned up e Angle the wheelchair backwards moving the front castors slightly up in the air e Drive carefully down the step and angle the wheelchair forward putting the front castors back on the ground A Turn the anti tip downwards Language English Model Netti 4U comfort CE Version November 2010 23 f F MM _n___s Companions drive down a step backwards e Check that the anti tip is turned up e Move the wheelchair backwards to the step e Drive carefully down the step and move the wheelchair backwards on the main wheel until the front castors have come away from the step e Put the front castors down on the ground A Turn the anti tip downwards 7 4 Driving techniques Slope Important advise for driving down and up hill avoiding the risk of tipping A Avoid turning the wheelchair in the middle of
11. age resulting from inappropriate or unprofessional installation and or repairs neglet wear from changes in wheelchair assemlies or instutions not approved by Alu Rehab or by use of spare parts delivered or produced by third parties In such cases this guarantee shall be considered null and void 11 3 Claim e Claim is to be addressed to the sales agent of the wheelchair Please note that sales documentation has to be filled in and signed correctly in order to document time and and place of the purchase of the wheelchair e Generally defects are accepted as reason for claims The sales agent and Alu Rehab are to decide whether a defect has to be repaired or the customer is entitled to a reduced prize due to the defect e This decision is based on an evaluation of defect 14 days after receiving a claim the customer receives a report from the sales agent and or Alu Rehab are going to handle the defect e Claim are to be forwarded as soon as a defect is discovered A Normal wear incorrect use or incorrect handling is not a reason for claims A The user is to use maintain and handle the wheelchair as described in the user manual 30 Language English Model Netti 4U comfort CE Version November 2010 11 4 Spare part guarantee e Alu Rehab offers a 5 year guarantee as a minimum for spare parts The periode of guarantee is defined as beginning at the date Alu Rehab cancels the production of a speci
12. ary between different countries Language English Model Netti 4U comfort CE Version November 2010 4 FEATURES OF NETTI 4U comfort CE Standard SEAT e Pressure distributive cushion e Tilt 5 to 20 e Adjustable depth of 7 5 cm WHEELS e 24 x 1 Puncture proof main wheels with quick release axle e Push rim Aluminium e 7 Puncture proof front castors with quick release axle Standard main wheels may vary between countries BACK REST e Angle 90 to 135 e Height 48 cm e The back rest cushion has integrated lumbar support and side support e Push bow FOOT SUPPORT e Universal or Angle adjustable foot support e Height and angle adjustable foot plates e Removable ARM SUPPORT e Height and depth adjustable e Removable HEAD SUPPORT e Height depth and angle adjustable e Removable 10 Language English Model Accessories e Hip belts See chapter 5 e Puncture proof wheels 12 16 and 24 with drumbrake See chapter 5 e Different head support models See chapter 5 WHEELS e Puncture proof PU wheels 12 16 and 24 1 with drumbrake See chapter 5 e Puncture proof PU 24 1 3 8 e Pneumatic wheels ARM SUPPORT e Hemi cushions See chapter 5 HEAD SUPPORT e Different head support models See chapter 5 5 1 Assembling of hip belt 5 Accessories a iu cs I vari l Illustration 5 1 1 oe variants e Pull the belt through the h
13. chair forward Language English Model Netti 4U comfort CE Version November 2010 25 Using a lift Before transfer to chair e Tilt the chair back e Remove the head support e Remove the foot supports e Open the back rest angle slightly e Replace the components when transfer is finished A Never stand on the foot plates without making sure that they are touching the ground due to the risk of tipping the chair forwards 7 8 Lifting the wheelchair e The wheelchair should be lifted in the frame and push bow only 26 Never lift the wheelchair by the foot supports or arm supports A Don t lift the wheelchair with a user in it 7 9 Push rim Netti 4U comfort CE is delivered with aluminium push rims as standard The material and distance to the main wheel influences the ability of the user to grip Contact your dealer to get information about push rims that fit your chair Alternative push rims may give a better grip but the friction may increase When using the hands to stop the chair the risk for burning of the hands increases A squeezing and trapping hazard of the fingers may occur when passing through narrow passages and if the fingers come between the spokes To avoid this risk we recommend spoke protectors as accessory If you want need to change push rims or increase decrease the distance between the push rims and the wheel please contact your dealer La
14. fied type of chair e During the periode of spare part guarantee spare parts are delivered within 14 days e During the periode of spare part guarantee Alu Rehab offers a 1 year guarantee for defect spare parts 11 5 Special adjustment adaptations Special adjustments adaptations are defined as all adjustments that are not included in this manual Wheelchairs that are especially adjusted adapted by the customer can not keep the CE mark given by Alu Rehab A S Norway If this is the case the warranty given by Alu Rehab A S Norway will not be valid If any uncertainty about special fitting and adaptations please contact Alu Rehab A S 11 6 Combinations with other products Combinations of Netti and other products not manufactured by Alu Rehab A S Generally in these cases the CE mark of all the products involved will not be valid However Alu Rehab A S has made agreements with some manufacturers about some combinations For further information please contact your dealer or Alu Rehab A S Norway directly 11 7 Service and repair Information about service and repair services in you area please contact your local dealer A unique identification number serial number is to be found on the bottom frame on left side of the chair A spare part catalogue for the wheelchair can be obtained through your local dealer or downloaded at www alurehab com A refurbisment manual for the wheelchair can be obtained th
15. hair 5 Mount the back rest Chapter 6 5 thoroughly after exposure 6 Mount the seat cushion Chapter 6 8 7 Mount the foot supports Chapter 6 9 8 Mount the head support Chapter 6 10 6 3 Front castors 9 Mount any accessories Chapter 5 To take off e Press the release button under the front Weight of components 45 cm width chair fork Main wheels 1 9 kg each To mount Anti tip 0 1 kg each e Lead the quick release axle into the Front castors 0 8 kg each Foot support angle adj 2 kg each Seat cushion App 1 kg Head support A 1 kg Head support C 0 9 kg 6 2 Main wheel To mount the main wheel remove the bearing house Pull the fork slightly to ensure that the fork is fully DEEG quick release bolt from the hub bushing lead it through the centre of the main wheel 6 4 Seat heig ht adjustment and into the hub bushing while pressing the knob in center The seat height at the rear depends on e Size of main wheel e Position of main wheel e Using 24 main wheels in the upper hole the seat height is 46 5 cm from the floor to the seating plate Using 24 main wheels in the next upper position the height will measure 50 cm to the seating plate Language English Model Netti 4U comfort CE Version November 2010 If it is required to change position of the main A Check the position of the anti tip wheels or to change to a different size of main and readjust the brakes after moun wheels unf
16. he wheelchair Check that the front castors are not fixed too hard is hard to turn Clean the front castors and forks for dirt e Check that the front castors are placed in correct position The main wheels Clean and grease the quick release are difficult to e Adjust hub bushing further out from the frame take off and put on The brakes are e Adjust the brake not functioning well OD Please contact your dealer for information about authorized service facilities that can give support if solution is not reached in this form When in need of spare parts please contact your dealer When making changes affecting frame construction contact dealer manufacturer for confirmation Language English Model Netti 4U comfort CE Version November 2010 29 11 TESTS amp WARRANTY 11 1 Tests Netti 4U comfort CE is tested and has been approved for usage both indoors and outdoors The chair is CE marked Maximum user weight 125 kg It is tested by TUV SUD Product Service GmbH according to DIN EN 12183 2009 9 Crash tested at Millbrooke Proving Ground Bedford UK according to ISO 7176 19 Seating system is tested for fire resistance according to ISO 7176 16 11 2 Guarantee Alu Rehab is providing you with a 5 year guarantee on all frame components and on the cross tube assembly There is a 2 year guarantee on all other components except batteries Alu Rehab is not responsible for any dam
17. head support in the head support bracket e The height and the depth of the head support is set to the required positions and tightened e The head support bracket is fixed by tightening the four screws two by two diagonally so the bracket is fixed with the same strength divided on the four screws Adjusting the head support in depth e Release the locking lever on top of the vertical bar A e Adjust the head support and fix it in required position 18 Language English Model Netti 4U comfort CE Version November 2010 Adjusting the head support in height e Release the locking lever on the head support adapter C e Adjust the head support and fix it in required position Adjusting the head support in angle e Release the adjustment wheel at the rear of the horizontal bar B e Adjust the head support and fix it in required position Adjusting the head support sideways e The head support adapter can be moved both to the right and left giving the possibility to accomodate special needs for head support e Untighten the four screws holding the adapter together e Move the adapter to the required position and fix the adapter by tightening the screws diagonally A Remember to release the levers when adjusting the head support If the head support stand does not fit the bracket perfectly the bracket is probably fixed too tight or unevenly After fitting the head support fix it properly b
18. ix the hub bushing including washer ting the main wheels or changing the and nut Remove the hub bushing and mount main wheel position it in the required position 6 5 Back rest e To mount the gas spring lift the push bow with one hand and lead the gas spring locking head into the plastic bracket with the other III 6 5 1 e Check that the hole in the locking head is parallel with the open holes in the plastic bracket x 2 pcs 24 mm open end spanners Make sure that the nut on inside of frame totally wreathes the wheel bushing Main wheels and front castors should be mounted according to the description below Il 6 5 1 24 16 and DA e Lock the back rest by pushing the locking bolt through the plastic bracket and gas spring locking head III 6 5 2 24 main wheel When the seat height is changed ensure that the front castors are placed so that the lower frame tube is parallel with the ground Language English Model Netti 4U comfort CE Version November 2010 13 A To check that the back rest is locked grip the push bow and press the back rest forward If the back rest falls forward repeat the locking procedure or contact your local dealer e The wheelchair is set to a standard seat depth and the plastic bracket has 4 holes of which three are temporarily blocked with plastic plugs III 6 5 3 II 6 5 3 e The back rest hinge has 4 holes III 6 5 4 The hole po
19. nguage English Model Netti 4U comfort CE Version November 2010 8 TRANSPORT Netti 4U comfort CE is tested and approved to crash test ISO 7176 19 8 1 Folding for transport When wheelchair is unoccupied fold as described below Put wheelchair in trunk or back seat When placed in back seat secure frame using safety belt e Remove the head support Chapt 6 10 e Turn the anti tips upwards Chapt 6 7 e Remove the arm supports Chapt 6 11 e Remove the foot supports Chapt 6 9 e Pull out the locking bolt for the back rest and place the back rest forward in the seat Chapt 6 5 e Remove the main wheels Chapt 6 2 e Remove the front castors Chapt 6 3 8 2 Transport in car If the head support is mounted correctly it is very stable but does not replace the need for an external neck support mounted in the car The chair is marked with stickers in 4 positions showing where to fix the straps SS Netti 4U comfort CE has been successfully tested according to the requirement of ISO 7176 19 using a combined wheelchair an occupant restraint system W120 DISR developed by Unwin Safety Systems For further information www unwin safety com Language English Model Netti 4U comfort CE Version November 2010 In front Use hook or strap attachment Mount an eye bolt in one of the holes in the wheel frame bracket Hook on a hook carabine hook in the eye bolt Item number 1 pair eye bolts with
20. nufacturer Alu Rehab A S evaluates the test to be equal to 5 6 years of normal use of the chair The disability of the user as well as the level of maintenance done foremost decides the durability of the wheelchair Thus the durability will vary depending on these two factors 1 4 The environment and waste disposal Alu Rehab and its suppliers wish to protect the environment This means e That we avoid using environmentally harmful substances and processes to the greatest extent possible e That Alu Rehab s products are ensured a long service life and a high degree of flexibility to benefit the environment and economy e That all packaging can be recycled e That the wheelchair was designed to be separated into its component materials to make recycling easier OD Contact your local recycling agent to get correct information how to handle in you area Language English Model Netti 4U comfort CE Version November 2010 5 f F MM ____s 1 5 Information for re use 1 6 About this manual All products from Alu Rehab are designed In order to avoid damages while using the to give years of maintenance free service Netti 4U comfort CE wheelchair please read All products can be adapted for re use this manual carefully before starting to use by an authorised dealer In order to the chair guarantee performance and safety Alu Rehab recommends the following tests prior to any re use Ls Symbol of fo
21. ole in the hip Hip belts with or elba without uphols l tery and with plastic lock or car lock See chapter 5 1 for mounting Head support Support C Large 7 IIl 5 1 1 Support A Sid t se PE T Illustration 5 1 2 e Thread the belt back through the belt clamp Support B Small Main wheels 12 amp 16 24 with drumbrake Abduction block The block reduces abduction Small 80mm width Medium 120mm width Large 140mm width Ill 5 1 2 Illustration 5 1 3 e Fix the hip belt bracket to the back rest hinge in the rearmost hole using the enclosed screws and nuts Anti tip Anti tip with pedal Hemi cushion Freedom to move affected arm on required position Il 5 1 3 x 2pcs 13 mm open end spanner Language English Model Netti 4U comfort CE Version November 2010 11 6 ASSEM BLI NG AN D A To check that the main wheel is ADJ USTM ENT properly attached to the hub remove the finger from the central knob and pull at the main wheel 2 1 Unpacking AA if the main wheel doesn t lock don t 1 Unpack all the parts and check that use the wheelchair but contact everything is there according to the your dealer packing list Sand and sea water salt used for 2 Mount the main wheels Chapter 6 2 gritting in the winter can damage 3 Mount the front castors Chapter 6 3 the bearings of the main wheels and 4 Check and adjust the seat dept Chap 6 6 front castors Clean the wheelc
22. ome with a locking bolt which makes the plates stronger e To lock the foot plates pull the plastic lock on the right foot plate and place the lock over the bolt on the left foot plate e To release the foot plate pull the plastic lock and lift the right foot plate up For outdoor use there should be a clearance of 4 5 cm between the foot plate and the ground IIl 6 9 7 A While making the adjustment there must be no load on the foot plates Removing the foot support e Pull the plastic lock on the foot plate rearwards so that the pin is released and the foot plate can be folded up e Raise the foot support a few degrees e Release the foot support by pulling it slightly straight up e Swing the foot support outwards e Lift and remove the foot support ill 6 9 8 III 6 9 8 Language English Model Netti 4U comfort CE Version November 2010 17 Ill 6 9 9 To adjust in depth the calf pad is removed from the bracket by using an open end spanner between the pad and the bracket Find the required position and refix it III 6 9 9 K 13 mm open end spanner Never stand on the foot supports A Never lift the wheelchair by the foot supports 6 10 Head support A Lever for depth adjustment B Wheel for angle adjustment C Lever for height adjustment D Head support bracket e Place the squared nut in the trace of the head support bracket as shown above e Place the
23. pecifications varies between countries Language English Model Netti 4U comfort CE Version November 2010 1 1 Areas of use indications for Netti 4U comfort CE Netti 4U comfort CE is a multi function wheelchair for partially or fully immobile persons with physical and or mental disabilities These disabilities may have multiple causes Netti 4U comfort CE has an adjustable seat and back angle thus facilitating for the user change of position mobilisation or posture correction stabilisation wherever the following functional impediments with their multiple possible causes are present e limited or lacking mobility e limited or lacking muscle power e limited movement range e lacking or limited trunk and body stability e hemiplegia e rheumatic type disorders e craniocerebral injuries e amputations e other neurological or geriatric disorders 1 2 Contraindications Netti 4U comfort CE is not suited for persons with a strongly enhanced muscular spasticity In this case we recommend the Netti III which offers a version with reinforced frame and leg rests for this particular need Ignoring this advice could in unfavourable circumstances lead to the deformation or fracture of metal parts in the area of the back tube the leg rests or the arm rests 1 3 Quality and durability The Netti 4U comfort CE wheelchair is tested at TUV SUD Product Service GmbH in Germany following the European Standard DIN EN 12183 2009 As ma
24. rbidden actions No warranty can be claimed when Please examine the following components for function integrity etc and replace parts as necessary ever these actions are implemented e Wheels tyre tread A Symbol of warning e Wheelchair frame Whenever this symbol is used e Cushions caution has to be taken e Hubs e Brake function e Headset bearings test for wear Symbol for lubrication important e Directional stability of wheels 1 information e Bearings Symbol for useful Please also note the content of chapter i ips 9 2 Cleaning and washing ui x Symbol for tools Anti tip i Correctly fitted the anti tip will secure the chair from tipping backwards We strongly recommend use of the anti tips 6 Language English Model Netti 4U comfort CE Version November 2010 1 7 Vital measures Netti 4U comfort CE is a comfort wheelchair designed for both outdoor and indoor use Specifications varies between countries Total weight 28 5 Kg 450 mm width chair re 9 Seat width 350 400 450 500 mm Seat depth From back rest cushion to front of seat plate 425 450 475 500 mm Seat height Hi From floor to top seat plate using 24 main wheels in upper hole position 465 mm By changing position of main wheels it is possible to achieve seat height of 500 mm Backrest height 480 mm Netti 4U comfort CE Overall length with foot 1130 mm suppor
25. rough your local dealer or downloaded at www alurehab com Language English Model Netti 4U comfort CE Version November 2010 31 Seat width Seat depth Back rest Total width Transport heigh width 42 5 50 cm Measured between skirt guards Measured from front of seat plate to back rest hinge Measured from from seat plate to top of back rest OD The weight is including main wheels front castors foot supports and arm supports No cushion OD Max user weight is 125 kg When mounting accessories such as power kit etc the weight of the accessories must be subtracted from the max user weight Dealer Serialno Date supplied n le 32 Language English Model Netti 4U comfort CE Version November 2010 Language English Model Netti 4U comfort CE Version November 2010 ALU REHAB Bedriftsvegen 23 NO 4353 Klepp Stasjon NORWAY Tel 47 51 78 62 20 Fax 47 51 78 62 21 E mail post alurehab com www alurehab com UM0001UK
26. s 28 9 2 Cleaning and washing instructions 28 10 TROUBLESHOOTING 29 11 TESTS amp WARRANTY 30 11 1 Tests 30 11 2 Guarantee 30 11 3 Claim 30 11 4 Spare part guarantee 31 11 5 Special adjustment adaptation 31 11 6 Combination with other products 31 11 7 Service and repair 31 12 MEASURES amp WEIGHT 32 Language English Model Netti 4U comfort CE Version November 2010 1 INTRODUCTION Netti 4U comfort CE is a comfort wheelchair meant for both indoor and out door use It is tested to DIN EN 12183 2009 The tests were carried out by TUV SUD Product Service GmbH in Germany In Alu Rehab we believe that wheelchairs should be chosen based on a thorough assessment focusing on the needs of the user and demands from the environment Therefore it is important to know about the possibilities and restrictions of the wheelchair Netti 4U comfort CE is a wheelchair designed for users with the need for comfort and relief The combi nation between the seating system and the ergonomical solutions in the frame construction offers many possibilities for adaptation and adjustments The wheelchair is constructed for indoor and outdoor use and offers the possibility to vary the sitting position from activity to rest using tilt and recline functions Max user weight 125 kg When mounting accessories such as power kit etc the weight of the accessories must be subtracted from the max user weight S
27. screw in the adjustable extension piece as shown in picture below e This extension piece has two holes Place it in the required position and tighten the screw K 5 mm Allen key The anti tip should always be used for the safety of the user 6 8 Seat cushion The seat cushion is fixed on the wheelchair with velcro It is very important to place the cushion in the wheelchair before use The cushion cover is washable and reusable Follow the instruction on the back of the cushion for correct maintance and washing of the cushion 6 9 Foot supports Netti 4U comfort CE can be delivered with either Universal or Angle Adjustable foot support Universal foot support The Universal foot support is fixed with the possibility of angle adjustment It is swingable and removable The foot plates are foldable and can be angled in fixed positions Delivered with height and depth adjustable calf support Angle adjustable foot support The angle adjustable foot support is freely adjustable in angle It is swingable and removeable The foot plates are foldable Language English Model Netti 4U comfort CE Version November 2010 15 and can be angles in fixed positions Delivered with height and depth adjustable calf support Mounting of foot support e Mount the foot support by holding onto the blue bar bending down towards the footplate Hold it in an angle of app 20 to the side frame Put it
28. sitions are in accordance with the holes in the plastic bracket If the locking head of the gas spring is mounted in the inner hole of the plastic bracket the back rest hinge should also be mounted in the inner hole etc d4 III 6 5 4 6 6 Seat depth adjustment e If the seat depth should be adjusted at the rear loosen the locking bolt in the plastic bracket III 6 5 2 e Find the required position for the locking head in the plastic bracket and remove the plastic plug from this hole e Lock the back rest by pushing the locking bolt through the plastic bracket and the gas spring locking head e After changing the hole position in the plastic bracket the hole position in the back rest hinge must be changed into the parallel position Check that the hole in the back rest hinge and the plastic bracket are mounted into the same hole position K 6 mm Allen key 6 7 Anti tip The anti tips should be mounted according to the mounting description which is enclosed with the chair upon arrival Use of the anti tip e Pull the anti tip out e Turn it up or down 180 e Lock it in position 14 Language English Model Netti 4U comfort CE Version November 2010 Adjusting the height of the anti tip The anti tip can be adjusted in to fixed positions The short position is for 12 amp 16 main wheels and 24 in upper position The long position is for 24 main wheels in lower position e Unfix the
29. t Folded length Folded width Folded height Total mass Mass heaviest part Static stability uphill Seat plane angle 50 Effective seat depth Effective seat width Seat surface height at front Backrest angle Backrest height 480mm Foot support to seat 770 mm distance Model width 50 cm Measured without cushions I a az oe se 20 Leg to seat surface angle Arm support to seat distance Front location of arm support structure Push rim diameter Horizontal axle location Language English Model Netti 4U comfort CE Version November 2010 7 2 QUICK REFERENCE The content of this page is a summary of the whole manual It gives a brief introduction to the use and care of the Netti 4U comfort CE wheelchair The quick reference is not a replacement for the manual only a reminder check list e Unpack the wheelchair Chapter 6 1 e Mount the main wheels Chapter 6 2 e Mount the front castors Chapter 6 3 e Put the back rest back and mount the recline gas strut to the back rest using the locking bolt Chapter 6 5 e Mount the seat cushion Chapter 6 8 e Mount the foot supports Chapter 6 9 e Mount the head support Chapter 6 10 e Set anti tip in active position Chapter 6 7 e Mount accessory See chapter 5 for more information Mounting descriptions will accompany the accessory For troubleshooting see chapter 10 For mounting and adjustmen
30. ts see chapter 6 Drive carefully Be aware that friction against push rims can create a warm surface Salt water can increase risk of corrosion Further precautions related to environmental conditions not needed When the chair is tilted rearwards the anti tips and brakes should always be in use Be sure to lock all handles properly The anti tips should always be used for the safety of the user Surface temperature of metal parts in frame structure might increase when exposed to direct sunlight Never stand on the foot supports due to risk of tipping forwards Never lift the wheelchair by the foot supports or arm supports Product configuration may vary between different countries For visually impaired people manuals and catalogues can be downloaded at www alurehab com If in doubt contact your dealer 8 Language English Model Netti 4U comfort CE Version November 2010 3 DESCRIPTION Standard version Push bow Head support Angle and depth adjustment for head support Head support bracket Release handle Back cushion Arm support with pad Seat cushion Universal or Angle adjustable foot support 10 Foot plate 11 Calf support 12 Calf support bracket 13 Front fork 14 Front castors 15 Anti tip 16 Main wheel 17 Brakes 0O N e e IR If any of these parts are missing please contact your dealer Product configuration may v
31. y tightening the little set screw in the centre on top of the head support bracket using an Allen key If the head support seems to short in height it can be turned 80 by releasing the adjustment wheel at the rear of the horizontal bar B e The arm supports are removable height and depth adjustable Please be aware while mounting that there is a left side and a right side arm support Ill 6 11 1 Mounting the arm support e Grip the arm support ill 6 11 1 and place the rear end of the arm support onto the plastic bracket of the back rest hinge ill 6 11 2 Push it downwards untill it clicks into position Give the arm support a slight push in horizontal direction to make sure that it is locked Language English Model Netti 4U comfort CE Version November 2010 19 ZS Never lift the chair holding onto the arm supports 6 12 Adjusting the brakes e The brakes are freely adjustable along the frame tube e To activate the brake push the handle forward III 6 12 1 Ill 6 11 2 Remove the arm support e Pull the locking knob at the rear of the arm ill 6 11 3 support and lift the arm support up Il 6 12 1 e To release the brake pull the handle rearwards III 6 12 2 Ill 6 11 3 Adjusting the height of the arm support e Untighten the screw on the arm support III 6 11 4 using a 4 mm Allen key e Raise or lower stem e Tighten the screw Il 6 1
Download Pdf Manuals
Related Search