Warning / Disclaimer - go-anywhere sport chair (spt)
Contents
1. 5 MANUAL 9 au 1 5 X i v 4 y THE GO ANYWHERE COMMODE SHOWER n TUB CHAIR CST IMPORTANT READ THIS CAREFULLY AND COMPLETELY Congratulations and Welcome to GO Mobility Solutions family of innovative products and aids designed to assist physically challenged individuals to get out and GO in ways never thought of before We are confident that this product will change your life as it has for so many others Please be advised that from time to time improvements and modifications are incorporated into our products which may not be reflected in the printed manual For the most up to date information please logon to www GoesAnywhere com click on the Products tab and find the downloadable link to the User Manual PDF file for the product that you own Should you have any questions or require any additional information not found within this manual please logon to the website and click on the Contact Us link or phone us toll free at 800 359 4021 It is highly recommended that review this manual carefully prior to use of your Go Anywhere_Chair We would also appreciate receiving any feedback and comments that you may have to offer so that we may continue to monitor and improve our customers quality of life WARRANTY NOTICE WARNING AND DISCLAIMER Please see LIMITED WARR2. its optional soft travel case should any heavy object be dropped on it If any aluminum tubing becomes dented telescoping parts may be affected rendering them dysfunctional These parts should be replaced as soon as possible Carefully follow the step by step unpacking assembly operating and disassembly instructions as specified below For additional assistance please view the corresponding videos www GoesAnywhere com PRODUCT OVERVIEW The Go Anywhere Commode Shower n Tub Chair provides a safe practical and convenient means for disabled individuals to travel wherever and whenever they want You will be confident and secure knowing that commode and bathing facilities are at your disposal Uncomfortable sometimes even embarrassing bathing and toileting experiences away from home are now things of the past thanks to this revolutionary new product Go Anywhere Commode Shower n Tub Chair consists of two components The rolling frame is used to transport the user from his or her bed to over a commode and or into a roll in shower Where a roll in shower is unavailable the rolling frame may be connected to the tub section which may be set up in most bathtubs enabling the user to easily glide over a bathtub wall and into a position beneath a showerhead Go Anywhere Commode Shower n Tub Chair is designed to work with both left and right handed tubs Weight bearing capacity
3. 250 lbs maximum Weight 31 Ibs 10 Ibs travel case Custom length bridge members are available Just wheelchair must be comfortable so must commode shower chair That is why the Go Anywhere Chair was designed to be as versatile as possible With a maximum width of just 18 the Go Anywhere Chair may pass through even the narrowest of doorways The seat height may be adjusted to accommodate for variable heights by shortening or extending the telescoping legs By extending the front legs and shortening the rear legs the seat may be leaned back slightly providing additional comfort and stability for those having limited balance and or upper body control The camber built into the legs helps to ensure the overall stability of the chair even with rear lean The telescoping legs supplied with the fixed tub section allow for it to 4 set to a height that matches the rolling section providing for a safe and easy level glide back and forth Footrest heights are adjustable as well to suit the needs of each individual The Go Anywhere Commode Shower n Tub Chair is e Safe and easy to use e Simple to assemble no tools are required e Lightweight and durable constructed of high quality aircraft grade aluminum e Compact Convenient and PORTABLE Rust and corrosion resistant easy to clean and virtually maintenance free e Adjustable the seat and footrests may be easily adjusted without the
4. and lock it in place using the latches and buckles at the tub section The tub section should now be firmly secured to the rolling frame and the legs of the tub section should be suspended above the bathtub or shower floor Using spring buttons and adjustment holes the telescoping legs of the tub section extend lower both of the legs so that they are as close as possible to the floor of the bathtub or shower Make sure that each telescoping leg is secure having push button protruding through one of the N adjustment holes j Using the adjustable non skid swivel glides at the bottom of each leg adjust the glides so that they raise or lower until the tub section is stable within the tub and does not wobble or rock Loosen the hex nut on each of the glides first then adjust the length of the bolts and finally re tighten the hex nut to lock the length 15 Note The swivel feet in the tub section have 1 adjustment range Make big adjustments with the spring pins and fine adjustments with the swivel feet ALWAYS CHECK THE SWIVEL FEET BEFORE USING THE CHAIR Extending any too far out of its leg might cause it to be unstable or even worse to dislodge from the leg k Finally test the entire Go Anywhere Chair assembly by unlocking the seat assembly from the rolling frame using the retractable spring lock located at the front of the seat assembly and slide the se
5. Mobility This limited warranty also applies to repaired or replacement Products for a period of either a 90 days from the date the repaired or replacement Product is shipped to you or b the time remaining on the original one year limited warranty whichever is longer What ts not covered by this limited warranty This limited warranty does not cover ile Product that has been subjected to misuse accidental damage shipping or other physical damage abnormal operation or handling neglect fire excessive heat natural disaster or Product that has been damaged due to repair alteration or modification by anyone other than an authorized service representative of GO Mobility Solutions or Product whose warranty quality stickers Product serial numbers plates or electronic serial numbers have been removed altered or rendered illegible or Product purchased used serviced or shipped for repair from outside the United States or used for commercial or institutional purposes including but not limited to Products used for rental purposes or Product returned without valid proof of purchase see 2 below or Foam and vinyl cushions due to their fragile nature or SOFT TRAVEL CASE DAMAGE MAY OCCUR TO THE ALUMINUM CONTENTS IF DROPPED OR IF OBJECTS ARE DROPPED ON IT DO NOT CHECK LUGGAGE AT AIRPORTS GATE CHECK UNLESS EXPRESSLY FORBIDDEN How do you get warranty service 1 To obtain warranty service in the United State
6. pointing down and open ends of the tubes placed against the hinged back of the travel case 6 Place one of the upholstered foam dividers on top of the now folded tub section 7 Remove the footrest assemblies collapse shortest positions possible fold each at its hinge and place them in the zippered accessory pouch 8 Remove the push handles from the backrest supports and place both into the zippered accessory pouch 19 9 lf installed remove through pins securing the armrests raise the armrests so they are parallel to the backrest and reinstall the through pins locking both armrests into their vertical position 10 Remove the second upholstered foam divider from the travel case and place it on top of the seat cushion Failure to do SO may result in permanent impressions being left in your seat cushion 11 While standing behind the chair remove the locking pins from the backrest Pull up on and fold the backrest down over the seat base Re install the locking pins to prevent the backrest from falling open in the next step Until the chair is broken in should the backrest fit too snugly you may need to give it a pop with the palm of your hand beneath the backrest at its center The fittings will relax with use 12 Turning it over place the rolling frame seat assembly including the upholstered foam divider with its legs pointing up into the open travel case 13 Loosen black knobs and
7. remove both cross braces securing them folded position using black knobs Store them in the zippered accessory pouch 14 Depress the spring pin buttons and remove both REAR legs w casters Do not remove the front ones Place the REAR legs w casters into the zippered accessory pouch 15 Zip the pouch closed and place it inside of the upside down rolling frame 16 Without removing the front legs w casters pull the tethered lower legs out of their respective sockets and lay them alongside the frame 20 17 Depress the spring pin button and slide the smaller diameter leg as far in as it will go into the wider diameter leg making it as short as possible Repeat with remaining leg Lay the casters down on top of Zippered pouch 7 1 18 Close the travel case 21 MAINTENANCE INSTRUCTIONS 1 Following each use towel dry all parts of the chair If used as an everyday use chair it is recommended that after each use your Go Anywhere Chair be laid on its side for a little while to permit any accumulated moisture to drain out Over time moisture could cause the rubber stem at the top of the caster assembly to loosen and become dislodged from the tubular leg Should this occur follow the steps delineated below under Troubleshooting Tips 2 From time to time remove the seat and seatback cushions and dry both the aluminum base and the backs of the cushions to prevent the growth of any
8. uncomfortable Following the steps in the aforementioned process will not change this fact unfortunately though it will make it a little less miserable And because your rights are protected by the Air Carrier Access Act 14 CFR Pt 382 if you experience any sort of problem that is directed solely to your disability immediately ask for a Complaint Resolution Official The C R O is there to resolve problems that may arise due to your disability and for no other purpose They are by law supposed to be available to any departing or arriving flight Do not be forced into any assistance that you did not ask for or do not want and on the other hand ask for assistance that is supposed to be there but is not readily available Go to the following link for more information http www disabilitytravel com airlines air_carrier_act_details htm FOR ADDITIONAL UP TO DATE INFORMATION AND INSTRUCTIONS PLEASE VISIT OUR WEBSITE AT www GoesAnywhere com 23 TROUBLESHOOTING TIPS PROBLEM The foam sleeves on my armrests or push handles slip off of the aluminum tubing SOLUTION Wrap the aluminum tube in two or three locations along the aluminum tube with some electrical or duct tape in order to provide additional friction PROBLEM The tethered upper legs either require too much force to push them into their respective sockets or once installed in their sockets seem loose SOLUTION Adjust the tension of the ball plunger s located at
9. use of any tools e Comfortable the seat and backrest cushions are constructed of durable waterproof foam providing for maximum comfort Both are attached to the chair frame with Velcro rendering them easily removable for cleaning or replacement PRACTICE MAKES PERFECT PLEASE do not become discouraged if you have problems either with the assembly or use of the Go Anywhere Chair on your first try Like with anything else familiarity and practice will serve to continually improve your experience with your new chair Additionally as your chair is brand new some of the hinges or telescoping parts will be snug initially They will break in and operate more easily with each use Of course should you have ANY problems please log on to www goesanywhere com e mail us at Support goesanywhere com call us at 800 359 4021 UNPACKING INSTRUCTIONS AND PARTS INVENTORY 1 PAY CLOSE ATTENTION TO THE ORDER IN WHICH YOU UNPACK THE CONTENTS OF THE CASE SO THAT YOU WILL BE ABLE TO REPACK IT EASILY IN THE REVERSE ORDER The Go Anywhere Commode Shower n Tub Chair is composed of thirty 30 individual components in addition to the wheeled travel case seat assembly rolling frame pre assembled w seat assembly L shaped end stop pre assembled w seat ass y backrest cushion pre assembled w seat ass y seat cushion pre assembled w seat assembly push handles legs w swivel cas
10. ANTY below If this warranty is acceptable return the chair for a full refund PRIOR TO USE Contact GO Mobility Solutions for shipping instructions and a Return Authorization BEFORE returning any product Go Anywhere Chair is not designed for use on surfaces having more than one plane i e it is not intended to be moved up or down steps or over curbs This product has been designed and tested only under conditions wherein all four casters maintain coincidental contact with the horizontal surface beneath it thresholds shower curbs or barriers are encountered that exceed gt in height the area in question should be brought within the code for handicap accessibility as specified by the Americans with Disabilities Act ADA Use of this product under conditions other than those specifically described above shall void this warrantee in its entirety The Go Anywhere Chair CST has been designed and successfully tested for use by persons NOT exceeding 250 pounds This product is NOT intended for use by persons weighing more than 250 pounds Should any individual exceeding 250 pounds choose to use this product for any reason he or she does so entirely at his or her own risk and contradictory to the recommendations and warnings of GO Mobility Solutions Use by any person in excess of the 250 pound weight limit shall void this warranty in its entirety Go Anywhere Chair may become damaged
11. at across the bridge tubes to the tub frame To release the retractable spring lock pull the ring outward turn 90 and release The ring will now be extended away from the seat assembly further than it had been Slide the seat towards the tub section a few inches or so turn the ring back until it recedes to its Original position and release The ring is returned to auto lock position When the seat assembly is slid either all the way across to the tub section or back to the rolling frame the retractable spring lock will lock automatically at the appropriate location OPERATING INSTRUCTIONS 1 IMPORTANT ALWAYS ENGAGE ALL FOUR CASTER LOCKS BEFORE TRANSFERRING TO OR FROM THE CHAIR AND WHEN GLIDING TO AND FROM THE TUB FRAME FOR MAXIMUM STABILITY AND SAFETY ENSURE THAT THE FRONT WHEELS AND THE REAR WHEELS ARE LOCKED IN THE POSITION SUCH THAT THE WHEELBASE 15 ITS MAXIMUM THE WHEELS ARE TURNED BENEATH THE CHAIR Engage the brakes on the casters by pushing down on the brake levers Release them by lifting up on the levers 16 2 IMPORTANT Never attempt to use your GO Anywhere Chair _without properly _installed Attempting to use the chair without them could cause structural failure which could result in serious injury or death 3 The armrests are constructed of double thick walled aluminum tubing for the purpose of supporting the weight of use
12. cidental or consequential damages so the above limitation or exclusion may not apply to you This warranty is the complete and exclusive agreement between you and GO Mobility Solutions It supersedes all other written or oral communications related to this product GO Mobility Solutions provides no other warranties for this product The warranty exclusively describes all of GO Mobility Solutions responsibilities regarding the product There are no other expressed warranties No one is authorized to make modifications to this warranty and you should not rely on any such modification State Law Rights This warranty gives you specific legal rights and you also have other rights which vary from state to state DISCLAIMER Except for the warranty provided herein the acknowledgement by GO Mobility Solutions that the chair as manufactured by it is fit for the general purpose for which most persons acquire a chair of its kind GO Mobility Solutions provides that you accept the chair as is without warranties either express or implied GO Mobility Solutions makes no warranty of fitness for your particular purpose and no warranty of merchantability beyond that already stated No warranties extend beyond the duration of the express warranty stated above 28
13. d soak in the tub 17 6 In order to release the seat assembly and permit it to glide pull out the ring of the seat lock located on the front of the seat and turn it 90 so it stays the open position The seat assembly may then be slid from the rolling frame along the bridge tubes to the tub section Once the seat assembly is released from the rolling frame and slid a few inches toward the tub section pull and turn the ring 90 it to its auto lock position and release When the seat assembly is slid the remainder of the way to the tub section the lock will automatically capture the seat assembly Additionally the tub section has a stop at its far end which will prevent the seat assembly from sliding off its track To return the seat assembly to the rolling frame pull the ring again to the open position As soon as the seat assembly is released from the tub section and slid a few inches toward the rolling frame pull and turn the ring 90 returning it to its auto lock position and release When the seat assembly is slid the remainder of the way to the rolling frame the lock will automatically capture the seat assembly ensure seat assembly cannot roll off its track on 15 return trip make sure that the L shaped stop is installed and secured the aluminum tube at the rear of the rolling frame BEFORE returning the seat assembly from the tub section to th
14. e rolling section 7 After the user has completed showering and has slid back and locked the seat assembly to the rolling frame disengage the tub section from the rolling section by opening the latches on the H bridge lock Remove the bridge tubes from the rolling frame The rolling chair is again free to roll once the brakes on the casters have been disengaged 8 Following each use towel dry all parts of the chair Occasionally remove the seat and seatback cushions and dry both the aluminum base and the backs of the cushions to prevent the growth of any mold or mildew 18 DISASSEMBLY 8 PACKING INSTRUCTIONS 1 Place the optional travel case on a raised flat surface such as a bed table or luggage rack Remove the accessory pouch and place it aside nearby 2 Place the H bridge lock and bridge tubes into the zippered accessory pouch 3 One at a time if necessary screw the adjustable glides down into the legs of the tub section making them as short as possible 4 Remove the first of the two tub section legs from its respective socket by giving a firm tug Depress the spring pin button and slide the smaller diameter leg as far in as it will go beyond all spring pin holes into the wider diameter leg making it as short as possible Place leg alongside tub section Repeat this procedure with the remaining leg placing it alongside opposite side of the frame 5 Place the tub section with its leg sockets
15. each of the leg sockets on both rolling frame and or tub section by loosening or tightening them as necessary PROBLEM The seat assembly becomes detached from the rolling frame and needs to be remounted SOLUTION Lay the rolling frame on its side and slide the seat assembly on to its nylon rollers located on the underside of the rolling frame The retractable spring lock located on the front of the seat assembly should automatically lock when the seat is slid into the proper position with the lock in auto lock position See 6 under Operating Instructions above PROBLEM am concerned that the adjustable non skid swivel glides located at the bottom of each of the four legs on the tub section might slide or that they could scratch or damage the surface of the bathtub SOLUTION Place a rubber bath mat on the floor of the tub before placing the tub section down 24 LIMITED WARRANTY AND RETURN POLICIES Please read this BEFORE operating or using your Go Anywhere Commode Shower n Bath Chair By operating or using the GO Anywhere Chair you agree to the terms of this warranty If you do not agree return the chair to GO Mobility Solutions BEFORE use to receive a full refund of the price you paid Thereafter this product may be returned at anytime within 30 days following delivery for a full refund less a 20 restocking fee and at your own shipping expense assuming the product is in like new condit
16. ion and less a 50 non refundable fee for the cushions which are yours to keep Health codes prohibit the resale of cushions used or not What does GO Mobility Solutions limited warranty cover The manufacturer of this GO Mobility Solutions product GO Mobility Solutions warrants to the holder of a valid proof of purchase or you that the product and all accessories provided by GO Mobility Solutions in sales package Product are free from material defects in material and workmanship pursuant to the following terms and conditions when used normally and in accordance with operation instructions This limited warranty extends only to the Consumer for Products purchased and used in the United States of America What will GO Mobility Solutions do if the Product 15 not free from material defects in materials and workmanship during the limited warranty period Materially Defective Product If the product is received within the warranty period and if the product is found by to be defective within the terms of this warranty GO Mobility Solutions will repair or replace the defective product at its option and cost There is a twelve month limited warranty extended for all parts except cushions 25 How long is the limited warranty period GO Mobility Solutions warrants its products to be free from defects in material and workmanship for up to one year starting from the date of original purchase from GO
17. l in shower not be available to you please continue on to Instruction 13 13 The tub frame is required only when access to roll in shower is not available The tub frame may be used with a standard bath tub a sunken tub or with a stall shower having a lip ledge or step that cannot be rolled over Should this be the case prepare the tub frame as follows Complete this procedure BEFORE the user transfers or is transferred into the chair a After having adjusted the rolling frame to its desired height roll the chair into position adjacent to the bathtub facing the wall on which the shower head is located and parallel to the bathtub where either the water will soray or within easy reach of a hand held shower device Engage all four caster locks 0 If the L shaped end stop is already installed in the side of the chair furthest from the bathtub then leave it there If however it is installed in the side closest to the tub first remove it by depressing the spring pin button beneath the aluminum tube and pulling it out and then reinstall it in the opposite side of the rolling frame at the rear of the chair 1 so it is installed in the side of the chair furthest from the bathtub THIS IS VERY IMPORTANT as the stop conjunction with the seat lock prevents the seat assembly from gliding off of the rolling frame its trip back from the tub section 13 Remove the seco
18. mold or mildew Make sure to peel the cushions off only when they are dry to prevent having the Velcro peel off with them Hydrogen peroxide sprayed on the cushions works very well to clean them or you may wipe them down with an antibacterial soap 3 Periodically apply 100 silicone spray to the bolt threads at the hinges and to the casters You can find silicone spray at any hardware store and it s great for all kinds of stuff 4 Replacement cushions may be ordered from GO Mobility Solutions either on line at www goesanywhere com or by calling 800 359 4021 22 TRAVEL WITH YOUR GO ANYWHERE CHAIR When traveling entails flying and airport security be prepared You are most assuredly going to be confronted with one or more potential obstacles Know your rights There are numerous resources available on line from which you may easily glean the specifics using a keyword search for airline and wheelchair Your Go Anywhere Chair is a fragile medical device which should be gate checked whenever possible and 15 not chargeable as passenger baggage You can review a chart of all airlines baggage fees at http www besitares com news news D589 Airline Checked Baggage Fee Chart html Review TSA regulations specific to travelers with disabilities at http www tsa gov travelers airtravel specialneeds index shtm Air travel for people with disabilities is a hassle and can be embarrassing and downright
19. n or difficulty 3 Include valid proof of purchase sales receipt identifying the Product purchased Product model and the date of purchase or receipt and 4 Provide your name complete and correct mailing address and telephone number Limitations and Exclusions Implied warranties including those of fitness for a particular purpose and merchantability an unwritten warranty that the product is fit for ordinary use are limited to one year from date of purchase Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply GO Mobility Solutions is obligated to provide the purchaser with repair or replacement 27 as described above so long as warranty period is in force This exclusive warranty remedy will not have failed as long as GO Mobility Solutions is willing and able to repair or replace the product as described Should this remedy be held to have failed the only remaining warranty obligation of GO Mobility Solutions shall be to provide the customer with a full refund In no event shall GO Mobility Solutions be liable for any indirect special incidental consequential similar damages including but not limited to lost profits or revenue inability to use the product or other associated equipment the cost of substitute equipment and claims by third parties resulting from the use of this product Some states do not allow the exclusion or limitation of in
20. nd upholstered foam divider that separates the tub section and the rolling frame from the travel bag exposing the tub section and remove it placing it on a raised flat surface with the leg sockets facing up Place the upholstered foam divider into the travel case with the one put away previously and set it aside d One at a time tilt up and install both upper legs by into its corresponding leg socket giving each a push until you feel them lock into securely in to place Align score line with holes Pull legs out until the spring pin button pops through first hole shortest leg length f Remove the 2 bridge tubes and the H bridge lock from the accessory pouch Place the now empty accessory pouch into the travel case with the upholstered foam divider and store 0 Insert the bridge tubes into the open aluminum tubes of the tub section Take the tub section with attached bridge tubes into the bathtub Turn the tub section over so it is standing upright on its adjustable glides with the bridge tubes resting on the edge of the tub 14 h While standing either inside the tub or Straddling the tub wall insert the remaining open end of each bridge tube into its respective counterpart on the rolling frame Install the bridge lock by placing the grooved tabs into their respective notches located on the rolling frame beneath the seat assembly midway between the bridge tubes
21. o 2 cross braces are provided which add stability to the rolling frame The tub section has two 2 legs each having adjustable non skid swivel glides Note All six 6 legs w swivel casters are scored with a line to help you align the spring pin buttons with the adjustment holes and color coded to identify their respective leg sockets The seat assembly includes the seat base and the seat back two 2 armrests acceptor tubes for the two 2 push handles and acceptor sockets for the two 2 footrest assemblies The two 2 bridge tubes and H bridge lock are used in conjunction with the tub section for conveying the seat assembly from the rolling frame to the tub section in instances when in a roll in shower is not available There is an end stop installed in one side or the other of the seat assembly at the rear of the rolling frame The end stop may be removed and installed in the opposite side of rolling frame depending on which direction the chair needs to face ASSEMBLY INSTRUCTIONS 1 Unzip and open the lid of the optional travel case or ee carton in a location near to where the occupant will transfer into the Go Anywhere preferably on raised flat surface such as a bed table or luggage rack 2 Remove the zippered accessory pouch placing it within reach and open the pouch 3 With the seat assembly still in the case one at a time raise each of the 4 tethered u
22. pered accessory pouch Install them into their color coded respective openings located on the front face of the seat assembly Holding each at a horizontal position parallel to the front face of the frame as shown insert the footrest paddle fully then rotate it to its down position 11 lf at this point there is roll in shower available assembly is complete Return the zippered accessory pouch containing the unused bridge tubes and H bridge lock back to the travel case and proceed to OPERATING INSTRUCTIONS 12 lf mounting or remounting the seat cushion to the aluminum seat assembly press the Velcro located on the front face of the cushion to the front of the chair first then lower it on to Velcro located at the top of the aluminum seat pan from front to back as you stretch the cushion toward the rear of the seat The seat and back cushions are constructed of high quality closed cell foam thoughtfully designed and manufactured to assure maximum comfort and protection Ensure that you do not place any heavy and or pointed objects on top of them or pack anything on top of them such as any other part of the chair Because the foam is closed cell it will not spring back after being compressed for extended periods of time Any indentations in the 12 foam caused such compression may become permanent Do not place anything sharp on top of the cushions as the vinyl surface can puncture or tear Should a rol
23. pper legs two have the lower legs w casters already installed from the rolling frame placing each into its corresponding leg socket giving it a push until you feel it lock into place The tension of the ball plunger s located at each of the leg sockets on both rolling frame and or tub section may be loosened or tightened as needed 4 Remove two 2 legs with swivel casters from the zippered accessory pouch here left and right caster legs Install them so that the colored dots on the lower legs match those on the tethered upper legs so exposed bolt heads at the bend in each leg face outwardly from the chair Depress the spring pin button on each caster leg and insert them into the open ends of the two available tethered legs on the rolling frame Once the spring pin button is inside the tube turn the caster leg slightly in either direction until the spring pin button pops through the center hole in the upper leg Note there are score lines on each of the legs to help you line up the buttons with the holes 5 Remove the rolling frame from the travel case by grabbing the seat frame turning it right side up and placing it on all four casters Using the spring pin buttons and adjustment holes in the telescoping legs adjust the height of the rolling frame so that the occupant may safely and comfortably transfer to the Go Anywhere Chair This may involve some trial and error Ensure
24. rs who wish to use them to push up on Please be advised however that the armrests their brackets bend depending upon the weight of the user and where on the armrest his or her hands are placed For the least amount of stress on the aluminum tubing reducing the chances of the armrests or brackets being bent it is recommended that the user push up on the armrests as close to the backrest as possible The further out on the armrests weight is placed the greater the chances are that they may bend 4 IMPORTANT NOTE ESPECIALLY FOR MALE USERS Due to the importance of maximizing the compactness of the Go Anywhere Chair the seat assembly must pass in fairly close proximity to both frames and bridge members as it glides back and forth As such any body part protruding below the seat Opening may make contact with the front to rear running support members of the frames or with any portion of the bridge lock especially the latch TAKE SPECIAL CARE TO ENSURE THAT NONE OF YOUR PARTS GET CAUGHT ON ANY OF QUR PARTS ON THEIR WAY ALONG THE BRIDGE 5 In order to use the tub section the footrests must be removed before gliding the seat over the bathtub wall The occupant s legs must be lifted over the tub wall into the bathtub before the seat assembly can be slid across the bridge tubes Once the occupant 15 safely inside the bathtub the footrests may be reinstalled or his or her legs may be left to dangle or to rest an
25. s of America Call 1 800 359 4021 for instructions regarding 26 where and what to return Before calling for service please check the user s manual Please do not return the chair to GO Mobility Solutions without prior authorization from GO Mobility Solutions Any shipping and handling expense is the customer s responsibility unless otherwise authorized by GO Mobility Solutions Except as provided by applicable law you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of Product s to the service location GO Mobility Solutions will return repaired or replaced product under this limited warranty to you transportation delivery or handling charges prepaid GO Mobility Solutions assumes no risk for damage or loss of the Product in transit If the Product failure is not covered by this limited warranty or proof of purchase does not meet the terms of this limited warranty GO Mobility Solutions will notify you and will request that you authorize the cost of repair and return shipping costs for the repair of Products that not covered by this limited warranty What must you return with the Product to get warranty service 1 Return the product in whole or part as was determined during the telephone call you made to report the issue requiring service to GO Mobility Solutions 2 Include a written description of the malfunctio
26. ters front pr pre assembled w seat assembly rear in accessory pouch cross braces in accessory pouch tub section legs w adj non skid glides pre assembled w tub section bridge tubes in accessory pouch bridge lock in accessory pouch footrest support twist connectors pre assembled w footrest assemblies in accessory pouch 2 curved footrest supports pre assembled w footrest assemblies in accessory pouch 6 2 footrests pre assembled w footrest assemblies accessory pouch 2 black knobs pre assembled on cross braces in accessory pouch 1 zippered accessory pouch for packing only 2 upholstered foam dividers for packing only Please note that although they are delivered as one pre assembled unit the seat assembly rolling frame seat cushion backrest cushion end stop and 2 of the 4 legs w swivel casters are all separate parts Similarly the tub frame and 2 legs w adj non skid glides are delivered as a pre assembled unit as are the 3 components to each of the footrest assemblies which are delivered assembled as well EVEN THOUGH YOU ONLY HAVE SIXTEEN 16 ITEMS TO ASSEMBLE PLEASE MAKE SURE THAT ALL THIRTY 30 COMPONENTS ARE ACCOUNTED FOR 3 The wheeled rolling frame has four 4 legs the tub section has two 2 All four 4 legs w swivel casters on the rolling frame have total locking swivel casters meaning the wheels can neither turn nor swivel when the locks are engaged Tw
27. that the frame will fit over the commode as well if necessary Make sure that each telescoping leg is secure with a spring pin button protruding through one of the adjustment holes The front legs may be extended to be longer than the rear resulting in additional rear lean The camber built into the legs provides added stability If you choose to add rear lean be sure to test the chair BEFORE USE ensure that will not tip over backwards ndividuals having limited upper body strength and or balance will find themselves more comfortable with the additional rear lean 6 Remove the 2 cross braces af Ai from the zippered accessory bag At Loosen thumb screws allowing each cross brace to unfold There are left and right cross braces Install each cross brace by placing its keyway over the protruding bolt head of its corresponding leg as indicated by the colored dots Align the groove of both long and short sections draw them together pulling the caster legs toward one another Tighten thumb screws to secure them IMPORTANT Never attempt to use your Go Anywhere Chair without both cross braces being properly installed Using the chair without them could result in structural failure which in turn may cause serious injury or death 12 11 20 10 7 When delivered the seat assembly will already be mounted on the rolling frame Remove the 2 through pins with p
28. ull rings attached to the frame with nylon cables securing the seat back in its folded position Raise the seat back up fully allowing it to drop into its Support sockets Push down firmly on the top of the backrest until it snaps into place Lock the backrest into place using the two through pins Ensure that ins when inserted through the diameter of the tubes extend entirely through the tubes and lock firmly into place Remove the upholstered foam divider that protects the seat cushion return to travel case for storage 8 The armrests are part of the seat assembly Remove the through pins securing armrests their folded position Once the armrests are lowered the through pins may be inserted into and through the armrests one and backrest supports locking them in e 4 place This will 1 prevent the B armrests from 51 being raised It 1 is recommended that the armrest on the opposite side of the chair from where the occupant will be transferred be lowered and locked into osition prior to performing the transfer 7 11 9 Remove push handles from accessory pouch and insert them into the openings located at the top of the backrest Rotate them until the spring pin buttons pop into place through the holes provided 10 Remove both left and right footrest assemblies from the zip
Download Pdf Manuals
Related Search