ELATION TVL F1WW - USER MANUAL 1.2
Contents
1. ELATION PROFESSIONAL ELATION TVLFIww u User Manual 1 2 www elationlighting com 2013 ELATION PROFESSIONAL all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ELATION brands and product names are trademarks or registered trademarks of their respective companies ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe insufficient and negligent assembly installation rigging and operation of this product Elation Professional USA 6122 S Eastern Ave Los Angeles CA 90040 323 582 3322 323 832 9142 fax www elationlighting com info elationlighting com Elation Professional B V Junostraat 22. 6468 EW Kerkrade Netherlands 31 45 546 85 66 31 45 546 85 96 fax www elationlighting eu info elationlighting eu 2 TVL FLCW User Manual 1 2 www elationlighting com CONTENTS General Information Warranty Safety Instructions General Guidelines Fixture Overview Installation Understanding DMX Fixture Menu 3 TVL FLCW User Manual 1 2 www elationlighting com GENERAL INFORMATION INTRODUCTION Congratulations you have just purchased one of the most innovative and reliable lighting fixtures on the market today TVL FIWW has been designed to perform reliably for years when the guidelines in this booklet are followed Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit These instructions contain important information regarding safety during use and maintenance UNPACKING Thank you for purchasing the TVL FIWW by Elation Professional amp Every TVL F1WW has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your unit for damage and be sure all accessories necessary to operate the unit have arrived intact In the event damage has been found or parts are missing please contact our customer support team for further instructions Please do not return this unit to your
3. Off Back Light Dimmer Zoom 001 255 90706 10096 Manual Test Dimmer Calibrat Fixture Temp Fixture Time Firmware Version Pro Defaults Yes Reset DMX Address Press MENU and UP and DOWN buttons to select DMX Address press the ENTER button to confirm and the present address will flash on the display Use the UP and DOWN buttons to adjust the DMX address from 1 to 512 Once the desired DMX address has been selected press the ENTER button to confirm selection To go back to the functions menu without any change press the MENU button again Press and hold the MENU button about one second or wait for 60 seconds to exit the menu mode Slave Mode Press MENU and UP and DOWN buttons to select Slave Mode press the ENTER button to confirm and the present mode will flash on the display Use the UP and DOWN buttons to select the Master or Slave Modes Once the desired mode has been selected press the ENTER button to confirm selection To go back to the functions menu without any change press the MENU button again Press and hold the MENU button about one second or wait for 60 seconds to exit the menu mode 18 TVL FLCW User Manual 1 2 www elationlighting com Black Out Press MENU and UP and DOWN buttons to select Black Out press the ENTER button to confirm and the present mode will flash on the display Use the UP and DOWN buttons to select Yes yes blackout or No no blackout Once desired
4. and an extended life There are no user serviceable parts inside this fixture please refer all other service issues to an authorized Elation service technician Should you need any spare parts please order genuine parts from your local Elation dealer Please refer to the following points during routine inspections Adetailed electric check by an approved electrical engineer every three months to make sure the circuit contacts are in good condition and prevent overheating Be sure all screws and fasteners are securely tightened at all times Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall Check for any deformations on the housing color lenses rigging hardware and rigging points ceiling suspension trussing Deformations in the housing could allow for dust to enter into the fixture Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously injure a person s Electric power supply cables must not show any damage material fatigue or sediments Never remove the ground prong from the power cable 22 TVL F1CW User Manual 1 2 EtATION TECHNICAL SPECIFICATIONS FEATURES 12 40 Motorized Zoom DMX Controlled Dimmer Zoom Flicker FREE Operation for TV and FILM No Noise Thermo Optical Cooling Technology SOURCE 1 100W Warm White LED Engine 50 000 Hour Average Life PHOTOMETRIC DATA High CRI 95 24 3 Lm W 3 200K 200K 2
5. dealer without first contacting customer support at the number listed below Please do not discard the shipping carton in the trash Please recycle whenever possible BOX CONTENTS 1 powerCON Cable 1 Gel Frame Holder 1 Rotating Barn Door Holder e Manual amp Warranty Card 3 MANUAL UPDATES Please check www elationlighting com for the latest revision update of this manual 4 TVL F1CW User Manual 1 2 www elationlighting com CUSTOMER SUPPORT Elation Professionale provides a customer support line to provide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting com for any comments suggestions For service related issue please contact Elation Professional amp Service Hours are Monday through Friday 8 00 a m to 5 00 p m PST Voice 323 582 3322 Fax 323 832 9142 E mail support elationlighting com Forum www ElationLighting com forum WARRANTY REGISTRATION TVL F1WW carries two year 730 days limited warranty Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written
6. down on a piece of paper and included in the shipping container If the unit is under warranty you must provide a copy of your proof of purchase invoice Items returned without a R A number clearly marked on the outside of the package will be refused and returned at customer s expense You may obtain a R A number by contacting customer support at 323 582 3322 3 IMPORTANT NOTICE There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty Damages resulting from modifications to this fixture and or the disregard of safety and general user instructions found in this user manual void the manufactures warranty and are not subject to any warranty claims and or repairs 5 TVL FLCW User Manual 1 2 www elationlighting com 2 YEAR LIMITED WARRANTY A Elation Professional hereby warrants to the original purchaser Elation Professional products to be free of manufacturing defects in material and workmanship for a period of two years 730 days from the date of purchase This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professional factory All shipping charges mus
7. the device when mounting removing or servicing the fixture 10 TVL F1CW User Manual 1 2 www elationlighting com MOUNTING POINTS Overhead mounting requires extensive experience including amongst others calculating working load limits installation material being used and periodic safety inspection of all installation material and the device If you lack these qualifications do not attempt the installation yourself Improper installation can result in bodily injury Fixture is fully operational in any mounting position hanging upside down or side mounted and will remain steady no matter the angle of the fixture head Be sure the fixture is kept at least 0 5m 1 5 feet away from any flammable materials decoration XY OX 3 KX TG lt L SSS lt 25 a S Z NS A os gt SS YS SS A My 2 2 gt gt e A SZ w Pa Wu lt 2 MALF S 2 SZ N Wa p 7 7 222 SS 2 lt 5 11 F1CW User Manual 1 2 www elationlighting com BARN DOOR amp SAFETY CABLE INSTALLATION 1 Open the spring by hands 2 Insert the barn door into the outside slot from topside 3 Open the barn door and then fasten the safety cable 4 Insert the barn door into the inside slot from topside 5 Pull the include
8. the mode has been selected press the ENTER button to confirm selection To go back to the functions menu without any change press the MENU button again Press and hold the MENU button about one second or wait for 60 seconds to exit the menu mode Back Light Press MENU and UP and DOWN buttons to select Back Light press the ENTER button to confirm and the present mode will flash on the display Use the UP and DOWN buttons to select On LED ON or Off LED OFF Once the desired mode has been selected press the ENTER button to confirm selection To go back to the functions menu without any change press the MENU button again Press and hold the MENU button about one second or wait for 60 seconds to exit the menu mode Manual Test Press MENU and UP and DOWN buttons to select Manu Test press the ENTER button to confirm and the present mode will flash on the display Use the UP and DOWN buttons to select the Dimmer or Zoom Modes Once the desired mode has been selected press the ENTER button to confirm selection Use the UP and DOWN buttons to change the value 0 255 Once the desired mode has been selected press the ENTER button to confirm selection To go back to the functions menu without any change press the MENU button again Press and hold the MENU button about one second or wait for 60 seconds to exit the menu mode Dimmer Calibrat Press MENU and UP and DOWN buttons to select Dimmer Calibrat press the ENTER button to confirm and th
9. 192 Max LUX 5 12 Full On 3 200 EFFECTS Zoom 12 40 Dimming 0 100 CONTROL CONNECTIONS 4 Button Control LED Menu Display Panel 2 DMX Channels 5pin DMX In Out 2 Ethernet RJ45 Ports Power In SIZE WEIGHT Length 20 4 519 mm Width 16 407 mm Vertical Height 17 4 442 mm Weight 35 lbs 15 8 kg ELECTRICAL THERMAL AC 100 240V 50 60Hz 141W Max Power Consumption 40 C 104 F Max Ambient Temperature APPROVALS RATINGS CE pending cETLus pending IP20 Rated INSTALLATION Rigging Clamps Not Included Working Position Any 360 INCLUDED ITEMS Integrated Yoke Handle powerCON Cable Rotating Bam Door Gel Frame www elationlighting com Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 23 TVL F1CW User Manual 1 2 www elationlighting com PHOTOMETRIC DATA 12 Beam Im 2m De 4m 5m 12 2 m ft ft Distance 13 1 16 4 40 Beam Im 2m 3m 4m 5m 40 e M M ft Distance 13 1 16 4 DIMENSIONAL DRAWINGS 519mm 451mm 16 0 407mm Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 24 TVL FLCW User Manual 1 2 www elationlighti
10. LR input plug cable with DMX signal from controller is not connected or is not inserted completely into the DMX input jack of the fixture DMX controller is switched off or defective The DMX cable or connector is defective DMX terminator has been inserted into the last fixture in your DMX chain 16 TVL FLCW User Manual 1 2 www elationlighting com FIXTURE MENU ON BOARD SYSTEM MENU TVL FIWW comes with an easy to navigate system menu The next section will detail the functions of each command in the system menu LED CONTROL PANEL The control panel see image below located on back of the fixture allows you to access the system menu and make all necessary adjustments to the TVL F1WW To select any menu functions press the MENU until the desired menu is displayed Select the function by pressing ENTER and the display will flash Use the UP and DOWN buttons to change the mode of the menu item Once the desired mode has been selected press the ENTER button to confirm your selection or the display will automatically return to the main menu without any change after being idle for 60 seconds Exit a menu at any time without making any adjustments by pressing the MENU button Function Display u t i m 4 eu 4 gt ISNAN POWERCON DMX OUT 17 TVL FLCW User Manual 1 2 www elationlighting com DMX Address 001 512 Slave Mode Black Out Yes
11. air of the product or replacement thereof including parts at the sole discretion of Elation Professional All products covered by this warranty were manufactured after January 1 1990 and bare identifying marks to that effect E Elation Professional reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore manufactured F No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by Elation Professional in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Elation Professional amp be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product G This warranty is the only written warranty applicable to Elation Professional amp Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore
12. d Safety Cable through the hole on the backside of the fixture and over the trussing system or a safe installation point iS This step is a very important to ensure the fixture will not drop if the clamp fails 12 TVL FLCW User Manual 1 2 www elationlighting com UNDERSTANDING DMX DMX 512 DMX is short for Digital Multiplex This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers DMX allows all makes and models of different manufactures to be linked together and operate from a single controller This is possible as long as all the fixtures and the controller are DMX compliant A DMX controller sends the DMX data instructions to the fixture allowing the user to control the different aspects of an intelligent light DMX data is sent out as serial data that travels from fixture to fixture via data IN and data OUT XLR terminals located on the fixtures most controllers will only have output jacks DMX LINKING To ensure proper DMX data transmission always use proper DMX cables and a terminator When using several DMX fixtures try to use the shortest cable path possible Never split a DMX line with a Y style connector The order in which the fixtures are connected in DMX line does not influence the DMX addressing For example a fixture assigned a starting DMX address of 1 may be placed anywhere in the DMX chain at the beginnin
13. e present mode will flash on the display Use the UP and DOWN buttons to adjust the value from 50 to 100 Once the desired value has been selected press the ENTER button to confirm selection To go back to the functions menu without any change press the MENU button again Press and hold the MENU button about one second or wait for 60 seconds to exit the menu mode 19 TVL FLCW User Manual 1 2 www elationlighting com Fixture Temp Press MENU and UP and DOWN buttons to select Fixture Temp press ENTER button to confirm and the present mode will flash on the display Pressing ENTER button will show the temperature of the unit To go back to the functions menu without any change press the MENU button again Press and hold the MENU button about one second or wait for 60 seconds to exit the menu mode Fixture Time Press MENU and UP and DOWN buttons to select MENU and UP and DOWN buttons to select Fixture Time press ENTER button to confirm and the present mode will flash on the display Pressing ENTER button will show the temperature of the unit To go back to the functions menu without any change press the MENU button again Press and hold the MENU button about one second or wait for 60 seconds to exit the menu mode Firmware Version Press MENU and UP and DOWN buttons to select Firmware Version press ENTER button to confirm and the present mode will flash on the display Pressing ENTER button will show the temperature of the unit T
14. ess is achieved by setting the correct DMX address on the digital display located on the back of the fixture You can set the same starting address for all fixtures or a group of fixtures or set different address for each individual fixture Be advised that setting all fixtures to the same DMX address will subsequently control all fixtures in the same fashion in other words changing the settings of one channel will affect all the fixtures simultaneously If you set each fixture to a different DMX address each unit will start to listen to the channel number you have set based on the quantity of control channels DMX channels of each fixture That means changing the settings of one channel will only affect the selected fixture In the case of the TVL F1WW when 2 channel mode default can also be set to 1 you should set the starting DMX address of the first unit to 1 the second unit to 3 1 2 the third unit to 5 3 2 the fourth unit to 7 5 2 and so on Note During start up the TVL FTWW will automatically detect whether a DMX data signal is being received or not If DMX data signal is being received the display will show XXX representing the actual DMX address If the fixture is not receiving a DMX signal the display will flash If your fixture is connected to a DMX controller and the display is flashing not receiving a DMX signal please check the following 3 PIN or 5 X
15. ext fixture in the DMX chain via a female 5 pin XLR jack 5 Pin DMX IN Accepts incoming DMX signal via a male 5 pin XLR jack Menu Control Buttons Control buttons MENU UP DOWN and ENTER LED Indicators LED indicators for DMX MASTER SLAVE and SOUND LED Control Display LED control display showing various menus and functions Safety Hook Used to connect safety cable to 10 Ethernet RJ45 Connectors x2 Used to transfer fixture s information to a main controller CURRENTLY THESE HAVE NO FUNCTION 9 TVL FLCW User Manual 1 2 www elationlighting com INSTALLATION CAUTION Please consider the GB7000 15 EN60598 2 17 and the other respective national norms during the installation The installation must only be carried out by a qualified person CAUTION T he electric connection mustonly be carried out by a qualified electrician 37 CAUTIONS he recommended MAX ambient temperature for this fixture is 104 F 40 C e For added protection mount the fixture in areas outside walking paths seating areas in areas were unauthorized personnel might reach the fixture Before mounting the fixture to any surface make sure the installation area can hold a minimum point load of 10 times the weight of the fixture 350 Ibs 158 kgs Fixture installation must always be secured with a secondary safety attachment such as an appropriate safety cable e Never stand directly below
16. g at the end or anywhere in the middle The DMX controller knows to send data assigned to address 1 to that fixture no matter where it is located in the DMX chain TVL F1WW can be controlled DMX 512 protocol The TVL FIWW is a 2 channel DMX fixture The DMX address is set electronically using the controls on the LCD menu DATA CABLE DMX Cable REQUIREMENTS For DMX and Master Slave Operation Your fixture and your DMX controller require a standard 3 pin or 5 pin XLR connector for data input and data output see figure below If you are making your own cables be sure to use two conductor shielded digital DMX cable rated at 120 ohms this cable is designed for DMX transmission and may be purchased from your Elation dealer or at most professional lighting retailers Your cables should be made with a male and female XLR connector on either end of the cable Also remember that a DMX line must be daisy chained and cannot be split unless using an approved DMX splitter such as the Elation Opto Branch 4 or DMX 4 7 13 TVL FLCW User Manual 1 2 www elationlighting com DMX Output DMX Input DMX Output DMX Input 3 Pin XLR Socket 3 Pin XLR Socket 5 Pin XLR Socket 5 Pin XLR Socket 1 Ground 1 Ground 2 Data 6 e 2 Data o 6 3 Data 3 Data 4 Open 5 Open Be sure to follow the above figure when making your own cables Do not use the ground lug on the XLR connector Do not connect
17. ng com OPTIONAL ACCESSORIES Light Shaping Filter 60 x 1 20 x 24 Sheet BEEN ge vein DTA 25 TVL FLCW User Manual 1 2
18. ng from EPILEPSY should avoid looking directly into the light source of this unit at all times e The fan and air inlets must remain clean and never blocked Allow approx 6 15cm between this fixture and other devices or a wall for proper cooling e Always disconnect from main power source before performing any type of service and or cleaning procedure Only handle the power cord by the plug end never pull by tugging the wire portion of the cord e Do NOT operate fixture if the power cord has become frayed crimped and or damaged If the power cord is damaged replace it immediately with a new one of similar power rating e Do operate fixture near any flammable materials e Do NOT operate fixture in dusty environments 7 TVL FLCW User Manual 1 2 www elationlighting com GENERAL GUIDELINES NEVER OPEN THIS FIXTURE WHILE IN USE During the initial operation of this fixture a light smoke or smell may emit from the interior of the fixture This is a normal process and is caused by excess paint in the interior of the casing burning off from the heat associated with the lamp and will decrease gradually over time This fixture is a professional lighting effect designed for use on stage in studios retail stores nightclubs theatres and other similar locations Do NOT attempt installation and or operation without proper knowledge of how to do so Do NOT permit operation by persons who are not qualified for operating this
19. o go back to the functions menu without any change press the MENU button again Press and hold the MENU button about one second or wait for 60 seconds to exit the menu mode PRO Defaults Press MENU and UP and DOWN buttons to select PRO Defaults press ENTER button to confirm and the present mode will flash on the display Pressing ENTER button will show the temperature of the unit To go back to the functions menu without any change press the MENU button again Press and hold the MENU button about one second or wait for 60 seconds to exit the menu mode Reset Press MENU and UP and DOWN buttons to select Reset press ENTER button and fixture will reset all functions to factory settings 20 TVL FLCW User Manual 1 2 www elationlighting com DMX CHANNEL FUNCTIONS AND VALUES DMX512 Configuration 255 21 TVL F1CW User Manual 1 2 www elationlighting com CLEANING AND MAINTENANCE CAUTION Disconnect from mains before starting maintenance operation CLEANING Frequent cleaning is recommended to insure proper function and an extended fixture life Cleaning frequency depends on the environment in which the fixture operates damp smoky or dirty surrounding areas can cause greater accumulation of dirt on the fixture s optics Clean LED lens with soft cloth surface weekly to avoid dust accumulation e Never use alcohol or solvents MAINTENANCE Regular inspections are recommended to insure proper function
20. published 6 TVL FLCW User Manual 1 2 EtATION www elationlighting com SAFETY INSTRUCTIONS TVL FIWW is an extremely sophisticated piece of electronic equipment guarantee a smooth operation it is important to follow the guidelines in this manual The manufacturer of this device will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual This device falls under PROTECTION CLASS 1 It s essential this device is grounded properly and only qualified personnel perform all electrical connections CAUTION Never touch the device during operation The housing may heat up CAUTION Never look directly into the light source as sensitive persons may suffer an epileptic shock CAUTION Keep this device away from rain and moisture CAUTION Unplug mains lead before opening the housing e For proper operation follow the Installation guidelines described in this manual Only qualified and certified personnel should perform the installation and only the original rigging parts brackets holders clamps safety cables included with this fixture should be used for installation Any modifications will void the original manufactures warranty and increase the risk of damage and or personal injury e Never look directly into the light source to prevent risk of injury to your retina which may induce blindness Those sufferi
21. t be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty Elation Professional will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in its original package No accessories should be shipped with the product If any accessories are shipped with the product Elation Professional shall have no liability what so ever for loss of or damage to any such accessories nor for the safe return thereof This warranty is void if the serial number has been altered or removed if the product is modified in any manner which Elation Professional concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the Elation Professional factory unless prior written authorization was issued to purchaser by Elation Professional if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include maintenance cleaning or periodic check up During the period specified above Elation Professional will replace defective parts at its expense and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Elation Professional under this warranty shall be limited to the rep
22. the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR outer casing Grounding the shield could cause a short circuit and erratic behavior DMX 512 CONTROLLER CONNECTION Connect the provided XLR cable to the female 5 pin XLR output of your controller and the other side to the male 5 pin XLR input of the TVL FiWW Please refer to the diagram below You can chain multiple panels together through serial linking The cable that should be used is two conductor shielded DMX cable with XLR input and output connectors Always be sure daisy chain your in and out data connections never split or Y your DMX connections unless you are using an approved DMX splitter such as the Elation Opto Branch 4 or DMX Branch 4 008000800008 000000000880 7 980000000100 N 90002209000 E 000000000000 000000000100 000000000100 000000000100 000000000100 000000000100 000000000100 000000000100 Address 1 Address 3 Address 5 Address 7 14 TVL F1CW User Manual 1 2 www elationlighting com DMX 512 CONNECTION WITH DMX TERMINATOR A DMX terminator should be used in all DMX lines especially in longer runs The use of a terminator may avoid erratic behavior in your DMX line A terminator is a 120 ohm 1 4 watt resistor that is connected between pins 2 and 3 of a male XLR connector DATA and DATA This fixture is inserted in the female XLR connector of the last fi
23. type of theatrical fixture Most damages are the result of operations by nonprofessionals Consistent operational breaks may ensure the fixture will function properly for many years to come Do NOT shake fixture avoid brute force when installing and or operating the device Do NOT connect fixture to a dimmer pack Always install the fixture with an appropriate safety cable When installing the fixture in a suspended environment always use mounting hardware that is no less than M10 x 25 mm also be sure the hardware is insert in the pre arranged screw holes in the base of the fixture Please use the original packaging and materials to transport the fixture in for service 8 TVL FLCW User Manual 1 2 www elationlighting com FIXTURE OVERVIEW 8 9 _ _ 9 1 Fuse Holder Assembly 8 f mti X 2 Power Switch 3 Power powerCON 2 10 4 5 Pin DMX OUT 7 il 5 5 Pin DMX IN oe e 6 Menu Control Buttons AM Ego 4 5 76 7 LED Indicators 2 8 LED Control Display 3 4 5 9 Safety Hook 10 Ethernet RJ45 Connectors x2 Fuse Holder Assembly Houses 250v T3 15A GMA safety fuse Always replace with an exact match unless otherwise specified by an authorized Elation Service Technician Power Switch Used to power fixture ON or OFF Power IN Power connection powerCON to power source 5 Pin DMX OUT Sends incoming DMX signal to the n
24. xture in your daisy chain to terminate the line Using a ine terminator Elation part DMX T PACK will decrease the possibilities of erratic behavior 1202 Termination reduces signal errors and avoids signal transmission problems iil and interference It is always advisable ma to connect a DMX terminal Resistance Vans 120 Ohm 1 4 W between PIN 2 DMX Nas PIN 3 DMX of the last fixture 5 Pin XLR DMX CONNECTORS Some manufactures use 5 pin XLR connectors for DATA transmission in place of 3 pin o pin XLR fixtures may be implemented in a 3 pin XLR DMX line When inserting standard o pin XLR connectors in to a 3 pin line a cable adaptor must be used these adaptors are readily available at most electric stores The following chart details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion Conductor 3 Pin XLR Female Out 5 Pin XLR Male In Data Compliment signal Pin 2 Data True 4 signal Pin 3 Notused Pi4 DoNotUse Notused Pn5 DoNot Use 15 TVL F1CW User Manual 1 2 www elationlighting com DMX ADDRESSING All fixtures should be given a DMX starting address when using a DMX controller so the correct fixture responds to the correct control signal This digital starting address is the channel number from which the fixture starts to listen to the digital control information sent out from the DMX controller The allocation of this starting DMX addr
Download Pdf Manuals
Related Search