NL100 DMX USER MANUAL
Contents
1. The starting address is defined as the first channel from which the device will respond to the controller Please make sure that you do not have any overlapping channels in order to control each device correctly and independently from any other fixture on the DMX data link If two three or more devices are addressed similarly they will work similarly Controlling After having addressed all devices you may now start operating these via your controller DMX PROTOCOL Channel 1 Control Operating Mode Channel 2 Motor Rotation 000 014 No function 001 085 Counter clockwise motor rotation Slow Fast 015 100 LED s on 086 170 Clockwise motor rotation Slow Fast 101 255 Auto 171 255 Motor rotation right to left to right Slow Fast CLEANING AND MAINTENANCE Please use a soft lint free and moistened cloth clean roquen y Never use alcohol or solvents There are no serviceable parts inside the device except for the fuse Maintenance and service operations are only to be carried out by authorized dealers Replacing the fuse Before replacing the fuse unplug mains lead Procedure Step 1 Take out the fuseholder under the power supply Step 3 Install the new fuse in the fuseholder Step 2 Remove the old fuse from the fuseholder Step 4 aa the fuseholder in the housing and fix it If the power supply cable of this device becomes damaged it has to be replaced by authorized dealers only in order to avoid haza2. INVOQU Ci NL100 DMX USER MANUAL CAUTION Keep this device away from rain and moisture Unplug mains lead before opening the housing For your own safety please read this user manual carefully before you initially start up FEATURES LED Double Derby Effect with R G B beams from the 12 lenses Master Slave function DMX 512 control via regular DMX controller occupies 2 channels Particularly bright illuminating by high power 3W LEDs Sound controlled via built in microphone Advantages of LED technology extremely long life of the LEDs low Microphone sensitivity adjustable via rotary control power consumption minimal heat emission maintenance free with Strobe effect brilliant light radiation 8 internal programs OPERATION After you connected the device to the mains the NL100 DMX LED DOUBLE DERBY RGB starts running STAND ALONE OPERATION In Stand Alone Operation you can use the NL100 DMX LED DOUBLE DERBY RGB without a controller For sound controlled operation set all DIP Switches to OFF You can do without a controller as the NL100 DMX LED DOUBLE DERBY RGB features a built in microphone which provides automatic sound control You can adjust the sensitivity with the rotary control on the rear panel SOUND CONTROL OPERATION For sound controlled operation set all DIP Switches to OFF MASTER SLAVE OPERATION The master slave operation enables that several devices can be synchronized and controlled by one mas
3. rds TECHNICAL SPECIFICATIONS Power supply 220 VAC 50 60 Hz Maximum housing temperature 7B Sag state 60 C Power consumption 20W Min distance from flammable surfaces 0 50 m Number of DMX channels 2 Min distance to lighted object 0 10 m DMX 512 connection 3 pin XLR SEI EN Fuse F 1 A 250V Sound control via built in microphone via built in microphone Weight 2 75 kg Maximum ambient temperature Ta 45 C Please note Every information is subject to change without prior notice
4. ter device On the rear panel of the NL100 DMX LED DOUBLE DERBY RGB you can find an XLR jack and an XLR plug which can be used for connecting several devices Choose the device which is to control the effects This device then works as master device and controls all other slave devices which are to be connected to the master device via a stereo shielded cable Connect the OUT jack with the IN plug of the next device Set all DIP Switches to OFF in order to determine the Master device Set DIP Switches 1 and 10 to ON in order to determine the Slave device DMX CONTROL OPERATION You can control the spots individually via your DMX controller Every DMX channel has a different occupation with different features For DMxX controlled operation set DIP Switch 10 to ON Building a serial DMX chain Connect the DMX output of the first fixture in the DMX chain with the DMX input of the next fixture Always connect one output with the input of the next fixture until all fixtures are connected Caution At the last fixture the DMxX cable has to be terminated with a terminator Solder a 120 Q resistor between Signal and Signal into a 3 pin XLR plug and plug it in the DMX output of the last fixture Addressing Each device occupies 2 channels To ensure that the control signals are properly directed to each device the device requires addressing This is to be adjusted for every single device by changing the DIP switches as set out in the table below
Download Pdf Manuals
Related Search