USER MANUAL - SecurityTronix
Contents
1. Tht CABLE TRONIX USER MANUAL CT CCT BFR2 Compression Tool PACKAGE CONTENTS This package contains One CT CCT BFR2 compression tool with adaptors for F RCA and BNC connectors One User Manual PRODUCT DESCRIPTION The CT CCT BFR2 is a linear compliant compression tool for use with RCA F and BNC compression connectors from Cabletronix and other vendors The tool comes with 3 adaptors for the appropriate RCA F and BNC connectors and supports RG59 RG6 and RG11 coaxial cables INSPECTION AND OPERATION 1 UNPACKING and HANDLING Each unit is shipped with 3 adaptors and one user manual Ensure that all materials are removed from the container before discarding packing material 2 MECHANICAL INSPECTION Inspect all pieces for shipping damage lf contents appear to be damaged or defective please contact your distributor or Cabletronix at 1 610 429 1511 for assistance 3 PRODUCT DIAGRAMS Handle Back Plate Adaptors for BNC RCA and F connectors A Sealing Sleeve Connector Adaptors 4 CABLE and CONNECTOR PREPARATION a To geta solid and reliable fit it is important that the cable and connector be properly prepared before compressing the connector onto the cable b Using a cable stripper for the appropriate size cable strip the cable to expose approximately 14 of center conductor c Using the cable stripper strip the cable jacket to expose approximately 14 of cable braid and dielect2. orce to make the connection g Remove the connector cable assembly from the tool and tug the fitting to ensure there is a solid connection
3. ric d Fold back exposed braid and make flush with cable jacket e Ifusing a BNC compression connector take the connector s center pin separate item and mount on the cable s center conductor If needed trim the cable s center conductor just enough so the pin is flush against the cable s dielectric Then take the BNC compression connector and slide over the center pin and onto the cable until the center pin is visible and flush with the BNC connector f If using an F compression connector simply slide the connector over the prepared cable where the center conductor protrudes 3 16 out from the connector nut g If using an RCA compression connector simply slide the connector over the prepared cable 5 USING THE COMPRESSION TOOL a Select the appropriate adaptor for the connector to be compressed b Screw the adaptor to the tool s plunger c Place the connector cable assembly into the compression tool with the connector end flush with the adaptor and the compression end against the tool s back plate d The tool s back plate can accommodate RG59 and RG6 coaxial cables and RG11 cable by flipping down the plate designed for smaller cables e Adjust the adaptor length from the plunger to ensure the connector cable assembly fits snugly in the tool f Using the tool s handle compress until the connector s sealing sleeve colored area is fully compressed no color showing Do not use excessive force Apply only enough f
Download Pdf Manuals
Related Search