Mobi-Roll `N Stow USeR`S MaNUal 187767/2 - Mobi-Mat
Contents
1. connection Connect the X strap with the C mat and push the X to face the screws The connection strap must remain flat Repeat with the other strap on the opposite side If he mat is equipped with a X connection Push the plastic connection on the strap towards the shaft to leave the strap end free Insert the strap end in the X connection on the mat Push the strap to face the screw on the main shaft and repeat for the other strap Start rolling the mat making sure that the plastic connection is correctly positioned on the shaft and pull the Mobi roll N Stow until the mat is completely rolled Place the roll belt B in front of the mat Place the Mobi roll N Stow above the belt place the belt around the roll and fasten the belt with the buckle Mobi Mat may be delivered in several sections In some cases there may be 2 X connections between 2 sections In that case 2 I shaped connectors are supplied in the storage bag Insert the l shaped connector in the X connector on the first mat Repeat on the other mat Push the connector to the center of the mat Repeat on the other side with the other I shaped connecior aipin aN e D puren LATE RS E A a p CE Tri nu tt eat Ala TE TAAR Y A iai i ei L 11111010 Batter eidele E LU E WITT La AAA EU A n T rer viel ee hue Free ei A BE A UNE Una Me any o Waalen ALE ENEE2. DESCHAMPS SINCE 1860 SN DD Se g ms 7 DESCHAMPS SINCE 1860 Usine du Bourisson BP 20 16400 La Couronne T l 33 0 545 677 030 Fax 33 0 545 678 160 deschamps deschamps fr www Mobi Mat com Safety precautions 1 Assembly a Description b Assembly of Mobi roll N Stow c Installation of Mobi Mat on Mobi roll N Stow 2 Instructions for use a Preliminary information b Directions for use 3 Maintenance and cleaning 4 Transport 5 Storage 6 Maintenance and repair Maintenance instructions 7 Possible problems encountered page page page page page page page page page page page page page page Summary O WO 22 23 24 25 25 26 Kit description 184370 2 187763 2 187767 2 187769 Roll belt 187770 shape connection 187766 Starting straps 2 Technical data Net weight without Mobi Mat 45 kg 99 Ibs Dimensions Total length 1700 mm 5 6 Total width 1700 mm S Total height 550 mm 1 9 Maximum capacity 50 m 164 Mobi Mat A2X width 1 53 m 5 Deployment or recovery manual mode approx 2 minutes vehicle mode approx 30 seconds People needed for deployment recovery manual mode advisable 2 persons minimum 1 Vehicle mode 1 person 100 of the parts are anti corrosion treated Safety precautions Always observe the precautions lis
3. OK FEH UI d Stee te rl ee ak eeh Wuel AL WA AL A ETAT L kv ohh i i poe EE Me WE TT ARENA a 1 Changing the mode of use Be careful when the handle is unlocked it falls Manual mode gt vehicle mode 1 Pull the trigger situated under the handle of the towing head and simultaneously lift the handle The handle for manual traction falls 3 Couple the Mobi roll N Stow on the tracting vehicle j i SP di FE L LS b i s 4 Check the Mobi roll N Stow is correctly locked to the vehicle towing bar by lifting it If it is locked it will stay on the coupling ball Vehicle mode gt manual mode 1 If the Mobi roll N Stow is already coupled to a vehicle Free the Mobi roll N Stow from the vehicle pull the trigger situated under the handle of the towing head and lift the handle forward 2 Unlock the toggle levers to free the towing handle 3 Rotate the towing handle to clip the towing ball into the towing head 4 Check that the handle is locked a 2 Changing Mobi roll N Stow direction Mobi roll N Stow is a reversible system It can either be pushed or pulled To change the system direction Rotate the loop of the pin and remove it from its hole Repeat with the opposite pin Pull the handle B free from the flanges C Place the handle B of the opposite side of the Mobi roll N Stow Remove the yellow plastic caps Place the
4. and shift the end to gain the missing lengh The mat is not long enough Deploy the mat completely free the mat from Mobi roll N Stow Pull the mat after checking that it is not anchored to the ground W DESCHAMPS SINCE 1860 Usine du Bourisson BP 20 16400 La Couronne T l 33 0 545 677 030 Fax 33 0 545 678 160 deschamps deschamps fr www Mobi Mat com A4 UTIL MANUEL MOBI ROLL UK d c 11 KB
5. handle B on the fittings of the flanges F and fasten with the pin Fold back the pin s loop Repeat on the other side Place the yellow plastic caps on the fastening ends on the other side of the handle b Preliminary information b 1 Moving the Mobi roll N Stow to the deployment area Reminder Mobi roll N Stow does not comply with road regulation It is not to be used on public roads Do not exceed 10 km h 6Mph Moving the empty Mobi roll N Stow Prepare the Mobi roll N Stow according to the chosen deployment mode see change of deployment mode p 14 Move the Mobi roll N Stow to the recovery site making sure the safety rules are applied see safety rules Moving the Mobi roll N Stow with mat Prepare the Mobi roll N Stow according to the chosen deployment mode see change of deployment mode p 14 If the handle is on the wrong side change the handle configuration see changing the rolling direction p 16 b 2 Ground preparation Before installing Mobi Mat avoid disturbing the ground with vehicles Also avoid laying Mobi Mat on very uneven ground Determine where and in which direction the Mobt Mob will be laid Make sure the surface is long enough to deploy the mat completely with a space for anchoring at each end If possible when there is a slope unroll in downhill direction Make sure no one stand in the path of the deployment and remove obstacles which might hinder the de
6. hapter maintenance and cleaning Mobi roll N Stow can be stored either mounted or dismantled Do not store Mobi roll N Stow under heavy loads 6 Maintenance and repair Maintenance instructions Replacing the bushings Remove the old bushings with hammer and punch Insert the new bushings in their lodging by hand or with a mallet being careful not to damage the bushing me A lo Replacing the thermo retractable sleeve With a cutter cut the damaged sleeve lengthwise Remove the caps at each end of the tube Insert the new sleeve and heat 70 C 158 F to retract on the tube Place the caps back on the tube Replacing the toggle levers Remove the rivets holding the damaged toggle lever Place the new toggle lever and secure it on the tube with a riveting machine Z Possible problems encountered Assembly The handles does not The flanges are mounted in the wrong bi o wey See assembly The roll belt are still fastened Remove the roll belts The handle is not in the correct posi tion See change rolling direction The mat does not Lift the Mobi roll N Stow and place it deploy about 2m backwards on the mat While one operator maintains the deployed mat the other operator unrolls what remains of the mat going backwards When deployment is finished free the mat and correct its position by hand The mats is blocked Mobi roll N Stow is under the mat Recover the mat
7. iguration 5 Repeat step 3 for this end 6 Place the handle E on the fittings of the flanges F and fasten with the pins 4 Men E HE 4 y i Marahi d dg un r pa j Wa DP d KA EE ih TJ D vw d Ei L 1 ue d t in o f F cf ray de ir b A L NG yy f A ze e Lee LE R k pa Le ww d je A GE be eege ECK di da Ka EE s GK AA 3 EZ CT 5 LOVE ACT Ro B PE ee RU nae STAs a Alt d 7 The system is ready for use in the vehicle mode to change into manual mode see changing mode of use page 14 8 Installation of the starting straps with X connector Mobi Ma to Mobi roll N Stow main shaft Place the connection eyelet above the shaft thread Insert the screw and the washer in the eyelet and screw clockwise Lock the screw with the Allen key supplied in the blue storage bag Cy LS SS x S at Ca SE a a E ST Ke d ANM Ca Sai SS ee N we Ow ris aS ki WEE Gs E SR Ke Ab y L ke AS A A Wii ae vu LR x i S er RAA OO ERAS ANNE aN SC lt NN aX lt lt Ss z er N Sg ma c Installation of Mobi Mat on Mobi roll N Stow Unroll Mobi Mat on the ground Position Mobi roll N Stow on the mat approximately 5m 16 from the end Fold the mat back towards Mobi roll N Stow If the mat is equipped with a C connection Connect the mat to the main shaft with the straps using the plastic X
8. or use Recovery vehicle or manual mode Before recovering Mobi Mat the Mobi roll N Stow make sure that The mat is not anchored to the ground The connectors between the Mobi Mat sections are aligned Sweep or blow sand and debris off of the Mobi Mat see mounting the Mobi Mat on the Mobi roll N Stow pg Start rolling by pulling or pushing the Mobi roll N Stow making sure the plastic connector is correctly placed on the shaft Continue until the mat is completely rolled Unroll the roll belt flat on the ground in front of the Mobi Maf roll Move the Mobi roll N Stow above the belt until the belt can be placed around the mat Fasten it with the buckle 21 28 3 Maintenance and cleaning After use we advise to clean the Mobi roll N Stow with fresh water Regular cleaning will enable the stainless steel to keep its initial appearance With regular use check to made sure the screws are locked at least once a month step 3 of assembly 4 Transport Mobi roll N Stow does not comply with road regulation It is not designed to be used on public roads or over It must be transported in an appropriate vehicle or trailer over public roads Make sure Mobi roll N Stow is well secured when transported over public roads by truck or trailer 5 Storage Before storing Mobi roll N Stow for a long period make sure your have performed the basic regular maintenance see c
9. ployment or damage the mat b 3 Deployment recovery Manual deployment Place the mat in the chosen deployment direction Remove the belt fastened around the mat 1 or 2 operators push the Mobi roll N Stow walking on the Mobi Mat while deploying For safety reasons and convenience the manual deployment is made by pushing However it is also possible to deploy the mat by pulling the Mobi roll N Stow To enable it change the handle direction see changing the rolling direction p 16 Once the end of the mat is reached disconnect each connector from the mat by pushing it to the end of the plastic connector in order to free the mat Anchor the mat to the ground see Mobi Mat Directions for use Secure the straps on the main shaft see pictures below lu id 08 H D H WA gro d A 28 ARAL May Ce seminar ie Shae AMEE eet J re y i KE d Gun i iji HO HAT dt TE rit Deployment with a vehicle Place the mat in the chosen deployment direction Remove the belt fastened around the mat and store it in the storage bag Since the system works in both directions you can unroll the Mobi Maf either by pushing the vehicle moves on the deployed mat or by pulling Once the end of the mat is reached disconnect each connector from the mat by pushing it to the end of the plastic connector in order to free the mat Anchor the mat to the ground see Mobi Mat Directions f
10. ted in this manual On important slopes only use the vehicle mode Always make sure that no one stands in the path of deployment and recovery Do not let a person aboard the vehicle pull the mat Do not use Mobi roll N Stow to transport materiel other than Mobi Mat Do not use Mobi roll N Stow to transport people After a long period in the sunshine metallic parts are hot and may cause burns when in contact with skin Do not roll more than 50m 164 of Mobi Mat on Mobi roll N Stow Do not roll Mob Mot rolls wider than the width specified for Mobi roll N Stow Mobi roll N Stow does not comply with road regulation It is not to be used on public roads When tracting Mobi roll N Stow with a vehicle e only use the towing system e avoid swift turns e avoid sudden stops e do not exceed 10 km h 6Mph Do not use Mobi roll N Stow if there is a missing part screw pin Avoid as much as possible to lay the mat on concrete or rocky surfaces LIMITS Range of temperature 20 C to 60 C 13 F to 140 F 1 Assembly a General sketch b Assembling Mobi roll N Stow 1 Remove the parts from the box 2 Insert the flange A on the main shaft B check the assembly sketch below for assembling configuration 3 Screw the top C with supplied M screws using the Allen key n 4 4 Insert the second flange A on the opposite end of the main shaft B check above sketch for assembling conf
Download Pdf Manuals
Related Search