PT201 Series LCD Monitor
Contents
1. Touch Return to return to the level above i TIPS If no actions are made on the adjustment bar display screen for around 10 seconds the screen returns to the ordinary display screen The menu screen can also be operated using your finger in pen only mode 21 Monitor Settings Menu functions Exit Setup Input Select Volume Finger only Pen only Finger pen s mode mode mode Touch mode selection Touch mode selection These icons switch the touch action mode A J mark is displayed at the top of the icon for the selected gt Input Select mode The mode can be checked using the touch mark located on the right side of the screen See pages 23 25 On the PT201 the icon pen design varies when the digitizer pen is connected This icon manually switches the signal input source from the PC Touching the icon displays HDMI and DisplayPort A W mark is added to the input source being displayed Finger pen mode This icon switches the touch action mode to finger pen mode When using the touch pen digitizer pen is not connected 178 appears When the digitizer pen is connected E3 appears The touch mark see page 25 becomes the finger pen mark or This icon configures the monitor For details on individual settings see page 23 Exit This icon closes the menu screen Pen only mode This icon switches the touch action mode to pen only2. Specifications mProduct Specifications Max resolution preis 1920x 1080 input terminals Other terminals Touch panel Capacitive USB for touch panel x 1 microUSB Type B Ver 2 0 communication Maximum touch points 10 point multi touch AC 100 V 240 V 50 60 Hz when using the supplied AC adapter DC 19 V Operating temperature 0 C to 35 C Operating humidity 20 to 80 no condensation Power consumption 41W 29W 0 3W when using the supplied AC adapter during normal operation power off Dimensions excluding protrusions mm Approx 463 8 x 25 2 x 274 8 WDH Weight kg Approx 2 3 excluding stand Approx 3 6 including stand When the DisplayPort input terminal and touch panel are connected As a part of our policy of continuous improvement ASUS reserves the right to make design and specification changes for product improvement without prior notice The performance specification figures indicated are nominal values of production units There may be some deviations from these values in individual units 21 Specifications mDimensional Drawings Note that the values shown are approximate values VESA holes 1 15 16 1 15 16 1 25 2 excluding protrusions aa oP 18 1 4 463 8 Unit inch mm Screen display size 17 432 g oe PAN ee N gt G 3 al Ge co 2 co oO co 9
3. 5 3 D D u D Use a VESA compliant mounting bracket capable of supporting 4 times the weight of the monitor When attaching a VESA compliant mounting bracket use M4 screws that are 3 16inch to 1 4inch 4 to 6 mm longer than the thickness of the mounting bracket When mounting the monitor on a wall or ceiling ensure that the mounting location is capable of supporting 4 times the weight of the monitor e g a concrete wall or column MStanding position 11 5 16 287 9 4 9 16 116 5 12 11 16 323 5 7 16 137 6 20 degrees 75 degrees Height of bottom of screen from table surface EPen writing position 2 3 8 60 7 e a 10 13 16 275 3 28 MSupported frequency All are compliant only with non interlaced Each is scaled to 16 9 and displayed using the full screen Specifications Depending on the connected PC images may not be displayed properly even if the compatible signal described above is input EDDC plug and play The monitor supports the VESA DDC Display Data Channel standard DDC is a signal standard for plug and play between monitors and computers Information about resolution and other parameters is exchanged between the two This function can be used if the computer supports DDC and it has been configured to detect plug and play monitors There are several types of DDC depending on the communication met
4. OSD amp LED When an abnormal temperature is detected the power LED flashes in red and green alternately and the screen displays a message TEMPERATURE LED When an abnormal temperature is detected the power LED flashes in red and green alternately Off Do not notify about an abnormal temperature Logo Screen This setting configures whether or not to display the logo screen during startup Language Language This setting changes the menu screen display language This setting resets all settings to their factory default 23 Monitor Settings Prohibiting operations operation lock Operation lock is enabled A key mark is displayed on the screen and it disappears This function makes it possible to prohibit operations to turn after around 5 seconds the power off and to prohibit touch action on the screen The key mark can be set to always be displayed See If an operation is attempted when the monitor is locked a key page 23 mark c is displayed for around 5 seconds f TIPS 1 e Ifthe menu screen is displayed when locked the invalid Or Teh ileya l Kaaa action mark is displayed e When the MENU button is pressed the menu screen appears and only the disable operation lock and exit menu operation are possible m Locking operation 1 Press the MENU button The menu screen appears MENU button Invalid action mark Press 2 Whil
5. mode When using the touch pen digitizer pen is not connected Fa appears When the digitizer pen is connected F appears The touch mark becomes the finger pen mark or amp Finger only mode This icon switches the touch action mode to finger only mode The touch mark becomes the finger only mark This icon adjusts speaker and headphone volume Touching Mute temporarily sets the volume to 0 Touching Mute again returns the volume to the previous level 22 Monitor Settings SETUP Menu Details Position Position When the monitor is used in portrait orientation power menu button on the top this icon moves the display position of the menu screen to the bottom of the screen in Mode Mode Normal This mode is suited to normal PC screen display Pen Writing This mode is suited to pen writing position Game This mode is suited to video games Multimedia This mode is suited to video playback User The user can adjust the image quality TF sog Brightness Brightness This icon adjusts the brightness of the backlight Other Other Operation Mode Eco Mode If there is no operation for 4 hours or more the monitor automatically turns off the power Normal Mode Will perform standard operation mVideo Input Setting RGB Range This setting configures the range of the RGB input signal Use Auto for normal operation If the range cannot be set correc
6. connector and insert it horizontally as far as it will go To USB port on PC Touch panel terminal Check the orientation of the connector and insert it horizontally as far as it will go Connecting USB devices When using a commercially available mouse keyboard or other device connect the device to the USB port Check the orientation of the connector and insert it horizontally as far as it will go 11 Binding Cables e When connecting cables spread a soft cloth on a stable level surface such as a desk and gently place the monitor on it with the screen facing down Video cable and USB cable Secure the video cable HDMI or DisplayPort and USB cable using the cable clamp 1 Remove the cable clamp 2 Route the cables through the cable 3 Push the cable clamp down into restraint slot place Cable restraint slot Cable clamp NJI Cable clamp Digitizer pen cable You can secure the digitizer pen cable using the supplied clamper and fixing screw 1 Pass the digitizer pen cable through the ring of the clamper 2 Attach the clamper using the fixing screw Clamper Fixing screw Digitizer pen cable RS 12 Connecting the Monitor to a Power Source e Use only the AC adapter and power cord supplied with the monitor 1 Con
7. ABZ GEE EAE IN SEARCH OF INCREDIBLE PT201 Series LCD Monitor User Guide E9503 June 2014 First Edition ss Information on the Disposal of this Equipment Do not throw your this product in municipal waste This product has been designed to enable proper reuse of parts and recycling The symbol of the crossed out wheeled bin indicates that the product electrical electronic equipment and mercury containing button cell battery should not be placed in municipal waste Check local regulations for disposal of electronic products IMPORTANT INFORMATION WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE The lightning flash with arrowhead symbol within CAUTION a triangle is intended to alert the user to the presence of uninsulated dangerous voltage RISK OF ELECTRIC within the product s enclosure that may be of SHOCK sufficient magnitude to constitute a risk of electric DO NOT OPEN shock to persons The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Federal Communications Commission Interference Statement This device complies with FCC Rules Part 15 Operation
8. e touching Input Select touch Finger only mode for at least 1 second 24 Monitor Settings m Disabling key lock Monitor status indicators 1 Press the MENU button The menu screen is displayed The status is displayed on the right side of the screen Touch Mark Key Mark MENU button Touch Mark The touch mark displays the current touch action mode Finger pen mode Press This mark is displayed during finger pen mode When the digitizer pen is not connected appears for at least 1 second 4 Pen only mode This mark is displayed during pen only mode When the digitizer pen is not connected appears When the digitizer pen is connected appears Finger only mode This mark is displayed during finger only mode Marks are displayed for about 5 seconds after changing setting You can also set marks to always be displayed See page 23 Key Mark When lock See page 24 is set the mark is displayed for around 5 seconds when the screen is touched It can be set to display constantly See page 23 TiPs e The display position can be changed from the menu Operation lock is disabled screen See page 23 e These marks are not displayed while the menu screen is displayed 250 Troubleshooting If you are experiencing any problem with your display before calling for service please review the following troubleshooting tip
9. emarks or trademarks of Adobe Systems Incorporated in the United States and or other countries All other brand and product names are trademarks or registered trademarks of their respective holders Language of OSD menu used in this manual is English by way of example Illustrations in this manual may not exactly represent the actual product or display LED Backlight e The LED backlight in this product has a limited lifetime If the screen gets dark or does not turn on it may be necessary to replace the LED backlight This LED backlight is exclusive to this product and must be replaced by an authorized ASUS servicing dealer or service center Please contact your local ASUS servicing dealer or service center for assistance The Power Cord and AC Adapter Use only the power cord and AC adapter supplied with the monitor When handling the AC adapter observe the following Incorrect handling may result in fire electric shock or injury Contents IMPORTANT INFORMATION sesceeeesseeeeeseeeeneeeees 3 Installing on a table Federal Communications Commission Interference Pen writing position Horizontal position 15 SIOEMENL eee see 3 Turning Power On Off ccccsssseeesssseeeessseneeseanenenseeees 16 DEAR ASUS CUSTOMER ccccceesesseeeeeeeeeeeeenennenseas 4 Turning on the power cccceescecseeeseeseeseeeeeeneeeeess 16 SAFETY PRECAUTIONG cccccccss
10. en move horizontally without releasing your finger pen and then stop deu 17 Touch Action Drag and drop mFinger actions Touch the screen with your finger pen and move without lifting Zoom When you have finished the movement lift your finger pen While touching the screen with two fingers move them closer U together and farther apart Slide to pan With your finger pen touching the screen move it up and down to scroll the screen Stretch e l a r Press and tap ove your tinger pen In a flicking motion With one finger touching the screen tap once single tap with O another finger Tap once single tap with another finger Flick your finger NF i With one finger touching v Press and hold Press briefly with your finger pen and then lift your finger pen Rotate from the screen While touching the monitor with one finger move the other finger in the direction you wish to rotate in Move another finger in the desired direction of rotation With one finger touching i U y T 18 Touch Action Digitizer pen The PT201 monitor supports a digitizer pen To use the digitizer pen the utility software must be installed and configured See page 19 mDigitizer pen actions Button operations Function button 2 Pen tip Function button 1 Function button 1 Pressing and holding this button and touching the screen performs the same action as a right click on a mouse factory default Func
11. eneeees 26 Installing on a stand Specifications uuesnnsnnnnnnnnnnennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 27 Standing OS TOI ace setae ee 14 Supplied Components If any component should be missing please contact your dealer O Liquid Crystal Display Monitor 1 O AC adapter 1 O Power cord O USB cable USB microUSB Type B for touch panel 1 O CD ROM Utility Disk 1 O Setup Manual 1 O Digitizer pen 1 O Digitizer pen stand 1 O Digitizer pen cable clamper clamper fixing screw 1 1 O Digitizer pen spare pen tips 1 O Variable stand stand fixing screws 4 hexagonal wrench 1 O DisplayPort cable 1 8 System Requirements mTouch panel To use the touch panel the monitor must be connected to a computer using a USB cable Touch panel operating conditions are as described below PC AT compatible computer with a USB 1 1 port and able to output a resolution of 1920 x 1080 Windows 8 1 32 bit or 64 bit version Windows 8 32 bit or 64 bit version Windows 7 32 bit or 64 bit version e Windows 7 or later is recommended for touch action e The digitizer pen can be used with Windows 7 or later Part Names Front view O 1 Power LED See page 16 mRear view O1 VESA holes See page 28 2 Anti theft hole Allows the monitor to be secured using a commercially available anti theft lock The anti theft hole is compatible with Kensingto
12. eption It is essential that only the supplied power cord be used Use only shielded cables to connect I O devices to this equipment You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment 3 4 DEAR ASUS CUSTOMER Thank you for your purchase of an ASUS LCD product To ensure safety and many years of trouble free operation of your product please read the Safety Precautions carefully before using this product SAFETY PRECAUTIONS Electricity is used to perform many useful functions but it can also cause personal injuries and property damage if improperly handled This product has been engineered and manufactured with the highest priority on safety However improper use can result in electric shock and or fire In order to prevent potential danger please observe the following instructions when installing operating and cleaning the product To ensure your safety and prolong the service life of your LCD product please read the following precautions carefully before using the product 1 2 aN Read instructions All operating instructions must be read and understood before the product is operated Keep this manual in a safe place These safety and operating instructions must be kept in a safe place for future reference Observe warnings All warnings on the product and in the instructions must be observed closel
13. erforming touch actions use the ball of your finger Use only the supplied digitizer pen or touch pen to perform pen actions Do not use the supplied pen for any purpose other than touch panel operation e Do not press hard on the tip of the digitizer pen If there is dirt or foreign matter on the tip of the digitizer pen remove it Failure to do so may damage the screen e Even when in pen only mode the unit may respond to objects other than the supplied digitizer pen e When performing pen actions with the supplied digitizer pen do not touch the screen with anything other than the hand that is holding the pen Monitor Settings Menu operations The monitor settings are configured by displaying the menu screen The operations on this page are the basic operations e Do not turn off the power while the menu screen is displayed Doing so may initialize the settings e While the menu screen is displayed touch actions are not possible other than those for the menu screen Example of operation Operations on the menu screen are described here using adjusting the volume as an example 1 Press the MENU button The menu screen appears MENU button 2 Touch Volume 3 Touch the adjustment bar and slide your finger to either side to adjust the volume Adjustment bar 4 Touch Exit or press the MENU button The menu screen disappears
14. f 500mA or lower Connection with a PC Connect the monitor and a PC using the connection cable Minputting video and audio HDMI input terminal Commercially available HDMI cable conforming to the HDMI standard To HDMI output terminal on PC HDMI input terminal Check the orientation of the connector and insert it horizontally as far as it will go DisplayPort input terminal Commercially available DisplayPort cable To DisplayPort output terminal on PC DisplayPort input terminal Check the orientation of the connector and insert it horizontally as far as it will go TIPS e The length of the signal cables or surrounding environment may affect the image quality e The video from the terminal that has signal input is Connecting Devices displayed In this state even if a signal is input from the Con necting the digitizer pen other terminal the display is not switched To switch the display use Input Select on the menu screen See page When using the supplied digitizer pen connect the digitizer 22 pen cable e Ifthe LCD monitor is turned on when there are input signals from both terminals the video from the DisplayPort input terminal is displayed factory default mUsing the touch panel To use the touch panel connect the monitor to a USB port on a PC using the supplied USB cable Check the orientation of the
15. he product needs replacement parts make sure that the service person uses replacement parts specified by the manufacturer or those with the same characteristics and performance as the original parts Use of unauthorized parts can result in fire electric shock and or other danger Safety checks Upon completion of service or repair work request the service technician to perform safety checks to ensure that the product is in proper operating condition Wall mounting When mounting the product on a wall be sure to install the product according to the method recommended by the manufacturer Heat sources Keep the product away from heat sources such as radiators heaters stoves and other heat generating products including amplifiers SAFETY PRECAUTIONS Continued 19 Usage of the monitor must not be accompanied by fatal risks or dangers that could lead directly to death personal injury severe physical damage or other loss including nuclear reaction control in nuclear facility medical life support system and missile launch control in a weapon system 20 Do not touch the parts of the product or the AC adapter that become hot for long periods of time Doing so may result in low temperature burns To maintain compliance with EMC regulations use shielded cables to connect to the following terminals HDMI input terminal and DisplayPort input terminal If a monitor is not positioned in a sufficiently stable locati
16. hod used This monitor supports DDC2B sHDMI input terminal pins HDMI Connector Function Function TMDS data 2 TMDS clock shield TMDS data 2 shield WIN gt TMDS data 2 13 TMDS clock O TMDS clock 4 TMDS data 1 14 5 TMDS data 1 shield 15 6 TMDS data 1 16 8 TMDS data 0 shield 18 5V 9 TMDS data 0 19 Hot plug detection mDisplayPort input terminal pins DisplayPort 20 pin No Function 1 MainLane 3 MainLane 3 N Function Gnd Gnd O 11 13 14 Gnd Gnd MainLane 2 MainLane 1 2 3 4 MainLane 2 5 6 Aux Aux Gnd Hot plug detection MainLane 1 10 MainLane 0 Gnd 29 m EAE IN SEARCH OF INCREDIBLE
17. is subject to the following two conditions e This device may not cause harmful interference e This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the Federal Communications Commission FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help WARNING The use of a shielded type power cord is required in order to meet FCC emission limits and to prevent interference to the nearby radio and television rec
18. n s MicroSaver security system Speakers Power Menu button See page 16 page 21 Cable clamp See page 12 USB terminal See page 11 Digitizer pen connection terminal See page 11 HDMI input terminal See page 10 DisplayPort input terminal See page 10 Touch panel terminal See page 10 AC adapter connection terminal See page 13 ob 9 Connecting Devices Be sure to turn off the power and disconnect the plug from the power outlet before connecting disconnecting cables Also read the manual of the equipment to be connected Do not forcibly bend or apply force to cables Doing so may result in wire breakage or other damage When connecting cables spread a soft cloth on a stable level surface such as a desk and gently place the monitor on it with the screen facing down Do not use any cable that has a damaged or deformed terminal Using such cables may cause malfunctions Connect USB devices that have the following thicknesses around the connector area D og SN S 1 2 inch 12mm 1 1 2 inch 38mm 5 16 inch 8mm 11 16 inch 17mm oov IA IIA IA IA C i TIPS 10 Images may not be displayed properly depending on the computer video card to be connected To use the digitizer pen the necessary software must be installed on the computer from the supplied CD ROM When connecting a USB device to the USB terminal use only USB devices with current consumption o
19. n appears the power plug from the power outlet Green Simara Orange lit No signal input Alternately flashing red and Abnormal temperature green P e When switching the POWER button off and back on always wait for an interval of at least 5 seconds Rapid switching may lead to errors or malfunctions e High temperatures inside the unit are indicated when the Power LED is alternately flashing red and green and may lead to the power turning off automatically See page 26 e For a complete electrical disconnection pull out the main plug MOperation Mode When the monitor is turned on for the first time after being shipped from the factory the operation mode setting screen will be displayed Set it to ECO Mode or Normal Mode ECO Mode If there is no operation for 4 hours or more the monitor automatically turns off the power Normal Mode Will perform standard operation Even after being set changes can be made using Operation Mode located in the menu of the monitor 16 Touch Actions Touch action modes There are three touch action modes finger pen mode pen only mode and finger only mode These modes can be changed on the menu screen The monitor is set to finger pen mode when shipped e Use the supplied pen in pen mode Finger pen mode You can perform touch actions with your fingers or pens digitizer pen Touch actions performed with a pen are given priority and any actions performed a
20. nect the monitor to the power outlet using the supplied AC adapter and power cord Back of monitor For power outlet Ob zu 2 a ee B AC adapter a connection terminal Ga Power cord AC adapter Supplied Supplied N Core restrainer cm Aad VL ask 7 ct AC adapter core 2 Push the AC adapter core into the core restrainer 13 14 Installation Installing on a stand Standing position Placement on the variable stand Place the unit on the supplied variable stand e The variable stand is designed for placement of the unit in the landscape orientation It cannot be used for the portrait orientation e When connecting the stand spread a soft cloth on a stable level surface such as a desk and gently place the monitor on it with the screen facing down e Applying excessive pressure to the LCD panel with your hands may result in damage to the unit e Be careful not to get your fingers caught when adjusting the angle There is a risk of injury 1 Place the variable stand on the rear of the monitor insert the fixing screws and tighten by hand to position the stand 2 Securely tighten the fixing screws using the supplied hexagonal wrench 3 Place the monitor in the standing position and adjust the angle of the stand Hold the top of the display with one hand so that it does not fall over hold the rear leg of the stand with y
21. on it can be potentially hazardous due to falling Many injuries particularly to children can be avoided by taking simple precautions such as e Using fixing devices like wall mount brackets recommended by the manufacturer e Only using furniture that can safely support the monitor e Ensuring the monitor is not overhanging the edge of the supporting furniture e Not placing the monitor on tall furniture for example cupboards or bookcases without anchoring both the furniture and the monitor to a suitable support Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture e Educating children about the dangers of climbing on furniture to reach the monitor or its controls 0 6 The TFT color LCD panel used in this monitor is made with the application of high precision technology However there may be minute points on the screen where pixels never light or are permanently lit Also if the screen is viewed from an acute angle there may be uneven colors or brightness Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of the monitor Do not display a still picture for a long period as this could cause a residual image Never rub or tap the monitor with hard objects Please understand that ASUSTeK COMPUTER Inc bears no responsibility for errors made during use by the customer or a third party nor for any other malf
22. or again Do not use in applications where water or other fluid may adhere to the screen If fluid adheres to the screen the touch panel may not operate correctly Do not use your nails touch pens or digitizer pens other than the one supplied ASUS pencils or other hard objects to operate the unit If the pen tip of the digitizer pen is worn or damaged replace the pen tip Failure to do so may scratch the screen or cause the digitizer pen functions to not operate correctly Depending on the application you are using the supplied touch pen and digitizer pen may not function If another USB device is connected to the computer to which the touch panel is connected do not operate the USB device during touch panel input Input may not take place correctly Do not use liquid such as alcohol in cleaning the screen Keep all cables off the touch panel Not doing so may lead to LCD monitor malfunctions If used in a room or location with drastic temperature differences the display quality of the screen and the quality of touch panel performance may decrease TIPS AND SAFETY INSTRUCTIONS e Do not drop the AC adapter or subject it to impact e Never disassemble the AC adapter It contains high voltage parts that are dangerous to touch e The AC adapter is for indoor use only Do not use it outside e Do not use the supplied AC adapter with other devices Do not damage the power cord and AC adapter nor place heavy objec
23. our other hand and adjust the angle of the stand The legs can extend about 20 to 75 degrees in relation to the flat surface Installation Installing on a table Pen writing position Horizontal position Remove the monitor from the stand and place face down on a table or other level surface e Do not exert a large amount of force on the monitor from above Doing so may damage the flap e After removing the monitor from the rack stand store the stand so that the screws will not be lost Pen writing position Place the monitor on a table or other level surface 1 Hold the flap by the depression on the back of the monitor and pull the flap up Depression 2 Place the monitor where you want to use it Horizontal position Place the monitor on a table or other level surface e When using the monitor horizontally use the horizontal tab in the upright position 1 Lift up the two tabs on the back of the monitor 2 Place the monitor where you want to use it 15 Turning Power On Off Turning on the power Turning off the power 1 Press the POWER button 1 Turn off the PC 2 Depress the POWER button for around 2 seconds POWER button POWER button P Press Depress for around 2 seconds Power LED The power LED turns off The power LED turns on 2 Turn on the PC e If the monitor will not be used for a long time disconnect The scree
24. properly if there is a large contact area e g if the screen is touched with the palm of the hand Is the monitor in pen only mode Touch action is disabled in pen only mode See page 17 22 Is the monitor in finger only mode Digitizer pen and touch pen actions are disabled in finger only mode See page 17 22 Are monitor operations locked See page 25 When there is no signal input to the LCD monitor actions on the touch panel are not possible Please operate the PC using the mouse and keyboard Is the digitizer pen cable connected properly See page 11 Is the tip of the digitizer pen worn If it is worn replace the pen tip See page 20 Use the supplied USB cable only The unit may not operate correctly if using a commercially available USB cable If you want to use a longer USB cable than the one supplied extend the cable using a USB cable with a repeater The response of the touch screen is slow Some parts of the screen do not respond When starting your computer or connecting the USB cable do not touch the touch panel When starting the LCD monitor do not touch the screen If the screen is touched the monitor may not function correctly In this situation turn off the LCD monitor power wait 5 seconds or longer and then turn the power on again While the menu screen is displayed touch actions are not possible other than those for the menu screen First exit the menu screen and then perform the operation
25. ps in the pen stand to make sure you do not lose them 1 Remove the spare pen tip storage cap 2 Insert the spare pen tips into the holes in the pen tip storage 3 Reattach the cap MReplacing the digitizer pen tip Replace the pen tip when it is worn or damaged Using the digitizer pen with a worn or damaged pen tip may scratch the surface of the monitor or may cause the digitizer pen function to stop operating Pen tips will wear with normal use Replace when worn down to this level 20 1 Unscrew the pen tip cover and remove it L PEA gt 2 Pull out the pen tip A 3 Insert a new pen tip and reattach the pen tip cover Other functions In Windows 8 1 8 input panel functions can be used In Windows 7 touch pointer and input panel functions can be used For information about the touch pointer and input panel functions see Windows Help Touch pointer A translucent image of a mouse appears near the point touched The left right buttons of the image can be clicked to perform the same actions as left right clicking a mouse Input panel A software keyboard and an input panel with handwriting recognition appear on the screen Windows 8 1 8 and Windows 7 excluding Starter the ink function of Microsoft Office can be used Handwritten comments can be written and handwriting can be recognized using this function For details see Microsoft Office Help Cautionary points When p
26. rload AC outlets or extension cords Overloading can cause fire or electric shock Entering of objects and liquids Never insert an object into the product through vents or openings High voltage flows in the product and inserting an object can cause electric shock and or short internal parts For the same reason do not spill water or liquid on the product Servicing Do not attempt to service the product yourself Removing covers can expose you to high voltage and other dangerous conditions Request a qualified service person to perform servicing Repair If any of the following conditions occurs unplug the power cord from the AC outlet and request a qualified service person to perform repairs a When the power cord or plug is damaged b When a liquid was spilled on the product or when objects have fallen into the product c When the product has been exposed to rain or water d When the product does not operate properly as described in the operating instructions Do not touch the controls other than those described in the operating instructions Improper adjustment of controls not described in the instructions can cause damage which often requires extensive adjustment work by a qualified technician e When the product has been dropped or damaged f When the product displays an abnormal condition Any noticeable abnormality in the product indicates that the product needs servicing Replacement parts In case t
27. s There is no picture or sound Are the AC adapter and power cord connected correctly See page 13 Is the power on See page 16 The power may turn off automatically if an abnormal temperature condition occurs see page 16 If this occurs move the unit to a cool location before turning the power on again There is a picture but no sound Make sure the volume is not set to minimum See page 22 Is the sound muted See page 22 No sound will come from the speakers when the monitor is in standby mode when the power LED is orange See page 16 The video does not appear Is the cable certified for HDMI or DisplayPort The monitor will not work unless a standards compliant cable is used Is the input signal compatible with this monitor See page 29 Is the monitor connected correctly to the PC Is the PC turned on Is video being output from the PC Is the PC in power saving mode Try pressing a key on the keyboard or moving the mouse Turn off the LCD monitor power wait 5 seconds or longer and then turn the power on again The video does not appear properly 26 If a powerful amount of strain is exerted on the touch display a portion of the display may remain on the screen In this situation turn off the monitor power wait 5 seconds or longer and then turn the power on again The touch panel does not respond Is the USB cable connected properly See page 11 The touch panel may not work
28. seeeeeeeeneeeseeeeeeeneees 4 Turning off the power a 16 TIPS AND SAFETY INSTRUCTIONS n n 6 Touch Actions cceseceeeeeeeeeeeeeeeeeeeeeneneeeseneneeeseansnensnaaes 17 Supplied ComponentSs u 22222 2200002n000nnnnnnnnnnnnnn 7 Touch action modes nenne eat 17 System Requirements cccceseceeessseeeeseeeeeeseseeeenseeeeees 8 TOC MACO ssnin een 17 ALO IN AIS norana rE 9 DOZE DEN nenn een 19 Connecting Devices uu24u40nn2nnnnnnnnnnnnnnnnnnnnn nn nnnnnnnen 10 Other IEIHCLONS essen ae 20 Connection with a PC ccccccccsseeeeeeseeseeesaeseseesanees 10 Cautionary points uussneseeeesnennnennnenenennnnnnne nennen 20 Connecting USB devices ccecceccsesseeeeeeseeeeseeees 11 Monitor Settings nee 21 Connecting the digitizer pen 2u002444nee nennen 11 Menu operations s0220200200neonnnnen nenne nenne nennnennenn 21 Binding Cable S n raosin eines 12 Menu TUNGONG nennen seen 22 Video cable and USB cable cccccssseeeeeeeeeeeeeees 12 SETUP Menu Details 22u00022422002200000 nennen en 25 Digitizer pen CADIS vinitacnahnsacdenistcchererticianssusuinaedsrinddwencais 12 Prohibiting operations operation lock 24 Connecting the Monitor to a Power Source 13 Monitor status indicators 22202242002nne nenne eeneennnn 25 Installation een een 14 TroubDIeSNOOting cccceesseeeeseeeeeseeeeeseeeeesseseeneess
29. t the same time with your fingers will be disabled Pen actions have priority even during hover operations See page 19 Finger actions will be enabled again about 0 5 seconds after you remove the pen from the screen Pen only mode This mode is for pen digitizer pen use only You cannot touch the screen with your finger You can touch the menu screen See page 21 with your finger Finger only mode This mode is for finger use only You cannot touch the screen with the digitizer pen Touch action Touch actions that can be used with this monitor differs from operating system and application The functions of touch actions are also different For details check Windows Help and the application s support documentation Windows 8 1 8 Single tap Double tap Swipe Swipe from edge of screen Drag and drop Slide to pan Flicks Press and hold Zoom Press and tap No x Rotate Y TIPS e In Windows 7 if the checkmark has been removed from Enable multi touch gestures and inking in Pen and touch in Control Panel select the checkbox mActions common to fingers digitizer pens and touch pens Single tap Touch the screen with your finger pen E N Double tap Quickly touch the screen twice with your finger pen Swipe Touch the screen with your finger pen move without lifting and then stop Swipe from edge of screen After touching the edge of the screen with your finger p
30. tion button 2 Pressing and holding this button while moving the pen on the screen enables the eraser function factory default You can change the functions that are assigned to the function buttons using the digitizer pen utility Hover operations The unit will recognize when the tip of the pen is hovering within 15 mm of the screen allowing you to position the pointer without touching the screen TIPS e The digitizer pen supports pen pressure functions The pen can be used with software that responds to pen pressure e The digitizer pen may not be recognized depending on the application if you touch the display with the pen before the hover operation is enabled Verify that the hover operation is enabled and then perform operations using the digitizer pen e If the digitizer pen does not operate correctly try placing the tip of the pen vertically on the screen mDigitizer pen stand Place the digitizer pen in the pen stand when it is not being used Digitizer pen Pen stand You can wrap the digitizer pen cable around the digitizer pen stand Top cover Pen tip storage cap Bottom cover Close the top cover and bottom cover as shown in the following diagram D gt 196 Touch Action MSpare pen tip storage The pen stand features a pen tip storage area where you can store spare pen tips TIPS e Spare pen tips are not stored in the stand at the time of purchase Store the spare pen ti
31. tly in Auto adjust to match the video Varying the setting may cause floating blacks or reduced gradations to appear DisplayPort Mode This setting configures the DisplayPort mode Use DisplayPort Mode1 for normal operation If the following symptoms occur in DisplayPort Mode1 set the mode to DisplayPort Mode2 e The video is interrupted flickers or is not displayed mMode on Start Up Touch Mode This setting configures the touch action mode See page 22 used when the monitor is turned on Reset The monitor starts in finger pen mode Save The monitor starts in the mode that was last used Position This setting is used to set the position of the menu at startup Reset Sets the display position of the menu at startup to Bottom in Portrait Orientation Sets the position to that when power was last turned off Save Pen Position Adjustment This setting adjusts the pointer position if the pen tip position is different than the pointer indicator position mDisplay Settings Mark Touch Mark This setting configures how to display the touch mark See page 25 This setting configures how to display the key mark See page 25 Mark Position This setting configures the display position of the status display mark touch mark key mark on the screen Key Mark LED This mark toggles the power LED on off Temp Alert Selects the notification method for an abnormal temperature
32. ts on it stretch it or over bend it Also do not add extension cords Damage to the cord may result in fire or electric shock Do not use the power cord with a power tap Adding an extension cord may lead to fire as a result of overheating Do not remove or insert the power plug with wet hands Doing so could result in electric shock Unplug the power cord if it is not used for a long time Do not attempt to repair the power cord if it is broken or malfunctioning Refer the servicing to the service representative Do not stay in contact with the parts of the product and the AC adapter that become hot for long periods of time Doing so may result in low temperature burns For your health observe the following e If using the monitor continuously take a 10 to 15 minute break every hour to rest your eyes e Do not use the monitor in high contrast light conditions e Do not use the monitor in locations where the screen is subject to direct sunlight Manual Scope This document is the operation manual for the PT201 Microsoft Windows and Windows Vista are registered trademarks of Microsoft Corporation The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries DisplayPort is a registered trademark of Video Electronics Standards Association Adobe Acrobat and Reader are either registered trad
33. unctions or damage to this product arising during use except where indemnity liability is recognized under law This monitor and its accessories may be upgraded without advance notice Do not use the monitor where there is a lot of dust where humidity is high or where the monitor may come into contact with oil or steam Do not use in an environment where there are corrosive gases sulfur dioxide hydrogen sulfide nitrogen dioxide chlorine ammonia ozone etc As this could lead to fire Ensure that the monitor does not come into contact with water or other fluids Ensure that no objects such as paper clips or pins enter the monitor as this could lead to fire or electric shock Do not place the monitor on top of unstable objects or in unsafe places Do not allow the monitor to receive strong shocks or to strongly vibrate Causing the monitor to fall or topple over may damage it Do not use the monitor near heating equipment or in places where there is likelihood of high temperature as this may lead to generation of excessive heat and outbreak of fire Do not use the monitor in places where it may be exposed to direct sunlight The AC outlet shall be installed near the equipment and shall be easily accessible Do not touch the screen when starting the LCD monitor If the screen is touched the monitor may not function correctly In this situation turn the LCD monitor off wait at least 5 seconds and then turn on the monit
34. y Follow instructions All operating instructions must be followed Cleaning Unplug the power cord from the AC outlet before cleaning the product Use a dry cloth to clean the product Do not use liquid cleaners or aerosol cleaners Attachments Do not use attachments not recommended by the manufacturer Use of inadequate attachments can result in accidents Water and moisture Do not use the product near water Do not install the product in a place where water may splash onto it Be careful of equipment which drains water such as an air conditioner Ventilation The vents and other openings in the cabinet are designed for ventilation Do not cover or block these vents and openings since insufficient ventilation can cause overheating and or shorten the life of the product Do not place the product on a sofa rug or other similar surface since they can block ventilation openings Do not place the product in an enclosed place such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions are followed Power cord protection The power cords must be routed properly to prevent people from stepping on them or objects from resting on them The screen used in this product is made of glass Therefore it can break when the product is dropped or applied with impact Be careful not to be injured by broken glass pieces in case the screen breaks Overloading Do not ove
Download Pdf Manuals
Related Search