ISH-SC Shore Durometer User`s Manual
Contents
1. 00 1HW if the needle not point to 100 1HW please Press the tip slightly for many times If the needle can not point to 100 1 HW the durometer can not use If apply it on the durometer test stand move the handle make the working table up to lift the weight make tip surface and feet surface touch to the working table closely the needle should point to 100 1HW If not in 100 1HW adjust screw on the working table after adjusting the needle still not to 100 1HW it is better to send it to factory to calibrate 2 Rubber test and requirement to test temperature a Thickness of the rubber is 10 Imm the area of sample must be more than 15x60mm If the thickness is less than 10mm please use multilayer sample congruence but the layer is not more than two The rubber must touch totally but the measured result is not the same as standard sample 3 The surface of the sample must be smooth no defect 4 After applying the durometer 35000 times in every apply 10000 times it is better to check spring pressure and index scale relation and shape size of tips accordance to regulation of GB531 5 After test sample please place the durometer into box put it in the dry environment 6 Please brush clean the up down shaft and the base of working table spread little against rust oil prevent rusting 7 When apply the shore durometer its available test range is 1OHW 90HW if it is above this range suggest you to apply other m2. ISH SC Shore Durometer User s Manual Function ISH SC shore durometer is an instrument for measuring foam sponge mipor rubber and other low hardness material It carries out standard of HG T2439 93 this durometer apply to 50 of compressibility adopt together with rubber when the pressure is above 0 049Mpa and measure the hardness of shoes mipor rubber which the epispastic preparation include in the plastic Specification Tip stroke 0 2 5 mm Dial Value 0 100 HW Available test range 10 90 HW Test error 10 90HW error is 1HW Tip dimension SR2 5mm Dimension 115x60x25 mm Net weight 0 5kg 2 5 0 04 ISH SC tip dimension HG T2489 93 Operation 1 Put the sample on the stable platform hold the shore durometer the tips distance to sample s edge at least 15mm press pressure feet on the sample without any vibrancy keep pressure feet parallel to make the pressure feet and sample contact closely unless other rule must read the value 1 second after pressure feet and sample contact closely If the value is other interval time must instruct For one test please test hardness 3 times with the different position which distance is 15mm and then choose average value For Operation 1 Before test please check the needle is point to zero If the needle is not in zero please loose the screw on up right and turn around the dial make the needle to zero Press the meter on glass board the needle mast in 1
3. easurement method
Download Pdf Manuals
Related Search