2x1 DVI KVM DL Switcher
Contents
1. 2x1 DVI KVM DL i Switcher USER MANUAL WWW gefen com ASKING FOR ASSISTANCE Technical Support Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Technical Support Hours 8 00 AM to 5 00 PM Monday thru Friday Write To Gefen Inc c o Customer Service 20600 Nordhoff Street Chatsworth CA 91311 www gefen com support gefen com Notice Gefen Inc reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice 2x1 DVI DL Switcher is a trademark of Gefen Inc 2007 Gefen Inc All Rights Reserved TABLE OF CONTENTS Introduction Features Panel Descriptions Connecting and Operating the DL Switcher Operation Notes RMT2 IR Installation IR Code Conflicts IR Extender Installation Specifications Warranty INTRODUCTION Congratulations on your purchase of the Gefen 2x1 DVI DL Switcher Your complete satisfaction is very important to us Gefen s line of KVM Keyboard Video amp Mouse DVI USB switches extenders con verters and hubs is designed to make computer use more comfortable more productive and less expensive KVM switches allow access to multiple computers from a single keyboard while the extenders give the user control over a computer up to 330 feet away from the work area Gefen products offer solutions for noise space and security concerns data center con trol information distribution conference ro2. any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding DL Switcher features and specifications is subject to change without notice
3. A Ls 5 Lbs WARRANTY Gefen Inc warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen Inc is notified within two 2 year from the date of shipment Gefen Inc will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly disclaimed 1 Proof of sale may be required in order to claim warranty 2 Customers outside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cable must be free from any scratches markings and neatly coiled The information in this manual has been carefully checked and is believed to be accurate However Gefen Inc assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen Inc be liable for direct indirect special incidental or consequential damages resulting from
4. f you are experiencing USB dropouts try using the switcher just as a USB hub by only connecting the USB cables from your computers to the switcher Connect your devices to the USB out portion of the switcher and connect your display to your computer directly Start your computer up and try switching If your USB devices do come up normally then you will need a DVI Detective to negotiate the video USB signals for faster switching If they do not come up normally then you will need to call tech support RMT2 IR INSTALLATION 1 Remove battery cover from the back of the RMT2 IR remote 2 Verify that dip switches 1 amp 2 are in the down OFF position 3 Insert the battery hold the battery so that you can see the positive side facing up The side that is not marked must be facing down 4 Test the RMT2 IR remote by pressing ONLY one button at a time The indicator light on the remote will flash once each time you press a button WARNING Do not press multiple buttons simultaneously and do NOT press buttons rapidly These actions will cause the remote to reset and steps 1 4 will have to be repeated Note The RMT2 IR ships with two batteries One battery is required for operation the second battery is complimentary Optional RMT 2 wired remote control IR CODE CONFLICTS In the event of IR conflicts please do the following 1 Remove the battery cover from the back of the RMT 2 IR remote 2 Locate the Dip Switches above the batter
5. ies 3 Switch the Dip Switches on the RMT 2 IR to any of the combinations pictured below 4 Dip Switches 1 and 2 in the RMT 2 IR correspond with Dip Switches 1 and 2 on the outside of the 2X1 DVI DL Switcher respectively Flip the switches on the outside of the 2x1 DVI DL Switcher to match the same Remote Channel as the RMT 2 IR The 2x1 DVI DL Switcher is now set to a new IR Code Remote Channel 1 Remote Channel 2 Remote Channel 3 Remote Channel 4 IR EXTENDER INSTALLATION How to Connect the IR Extender 1 Locate the dip switches underneath the switcher they will be hidden underneath a blank silver sticker and flip dip switch number 4 to the ON position 2 Plug the IR extender into the Remote port on the front of the Switcher Unit You should now be able to switch using the IR Extender SPECIFICATIONS Video Amplifier Bandwidth eeornnnnnnnnnnnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 2x 1 65 Gbps Fe Video Signal energie 1 2 volts p p Input DDC SAA 5 volts p p TTL Single Link Range are 3840 x 2400 DVI Input Output Connector Type rrrnnnnnnnnnnnvrnnnnnnnrn DVI I 29 pin female digital only USB 2 0 Input Connection eee Type B USB 2 0 Output Connection Lassa eee Type A Power Consumption renee cee ctercsie ccc deec vereseceeuedents escecedecetectiesdocgvecvuincas 15 Watts max Power NN 5VDC DIMENSIONS essen ep nenn 4 625 D x 8 5 W x 1 75 H ETG 0100 0 RR EEE 1 Rack Space SET V
6. losure Interface Connects to optional wired Audio In 1 Audio In 2 Audio Out RMT 2 remote control 5VDC Input DVI Int DVI Out DVI In2 USB In 1 USB Output USB In 2 CONNECTING AND OPERATING THE 2x1 DVI DL SWITCHER How to Connect the DL Switcher to your devices 1 Connect the supplied cables from your first computer into the DVI In 1 USB In 1 and Audio In 1 connection in the back of the DVI Switcher 2 Connect the supplied cables from your second computer into the DVI In 2 USB In 2 and Audio In 2 connection in the back of the DVI Switcher 3 Connect the monitor to the DVI Out connection 4 Connect your USB devices e g keyboard mouse into the USB Out 5 Connect your speakers to the Audio Out 6 Plug the 5VDC power supply into the DL Switcher How to Operate the DL Switcher 1 Use the front panel push button to switch between sources 2 Use the RMT2 IR remote control port to remotely toggle between sources 3 Use the optional RMT 2 wired remote control to remotely toggle between sources 2x1 DVI DL OPERATION NOTES Operation Notes When turning on or rebooting your computers the DVI DL Switcher must be selected to the computer that is booting until the computer completes the boot cycle This step can be eliminated using the Gefen DVI Detective which stores the displays EDID If you loose your picture when switch from source 1 to source 2 or vice versa you will need a DVI Detective I
7. om presentation and school and corporate training environments Our Commitment Gefen will always offer the finest quality product at the best possible price Included in that price is a lifetime of free support from a team of outstanding engineers Now you can switch easily and reliably between any combination of two dual link DVI amp USB 2 0 equipped computers PC or Mac using only one keyboard display and mouse The DL cross platform switcher saves space there s no need to work on a desk crowded with double displays keyboards and mouse devices It saves time there s no need to move from one monitor to another to access different computers And it saves money there s no need to purchase additional displays mouse devices keyboards etc FEATURES Features e Saves money on hardware costs e Saves space on your desktop e Save time and increase your productivity e Maintains highest 3840 x 2400 x 60Hz resolution video e No loss of quality e Use either PC or Mac with USB keyboard mouse e Switches easily between any two dual link DVI computers e Switch between two dual link DVI USB 2 0 and Audio Sources e IR Remote control Includes 1 2x1 DVI DL Switcher 1 5v Power Supply 1 RMT2 IR Remote Control 2 6ft Dual Link DVI cables 2 6ft USB cables 2 Audio cables 1 Users Manual PANEL DESCRIPTIONS Power Indicator Infrared Selector Eye Indicates which input is selected Contact C
Download Pdf Manuals
Related Search