18.5 “/21.5” DIGITAL LCD TV + DVD
Contents
1. goocoo000c 5 at 14 15 16 17 18 19 1 VOLUME controls 8 AUDIO IN jacks Left Right VIDEO IN jack Adjust the volume level AV IN 1 2 CH buttons 9 TV Aerial Coaxial TV antenna input Press to change the TV channels and highlight 10 HEADPHONES jack selections Up amp Down on the menu screen 11 SCART jack AV IN 2 gt gt i button 12 HDMI jack Press to select next title chapter or track on a disc 13 Power Cord and fast forward playback 14 Colour LCD Screen lt lt button 15 Disc Door Press to select previous titles chapters or tracks Push gently to close the disc door on a disc and fast reverse playback 16 V PUSH OPEN knob 3 FUNCTION button Push down to open the disc door Select DTV ATV AV1 AV2 SCART YUV SCART 17 Remote Sensor DVD or HDMI Do not block this sensor or the remote control will 4 MENU button not work Press to display the on screen TV menu Standby Indicator 5 gt PLAY button Indicates whether the unit is ON or in STANDBY Press to start or resume playback of a disc OFF mode 6 I button Light On The unit is in STANDBY Turns the unit on and off Light Off The unit is turned ON 7 COMMON INTERFACE slot 18 Speakers For optional Conditional Access Module 19 Removable stand 13 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 13 7 27 2011 15 51 36 CONNECTING A TV ANT2. Connect to a VCR Video Game System Camcorder Connect the AUDIO VIDEO cable not included as shown Make sure you connect the cable from the other equipment AUDIO and VIDEO OUT to this unit AUDIO and VIDEO IN Press the FUNCTION or AV button to select AV1 mode Note Please refer to the user manual for the other equipment for more information To AUDIO VIDEO IN jacks AV IN 1 CONNECTING TO SOURCES WITH SCART Devices with RGB output must be connected to the SCART input Connects the SCART from the source to the corresponding SCART on this unit SCART cable not included as shown Make sure you connect both to SCART to SCART To operate the connected device and play the source first press the FUNCTION or AV button to select the AV2 SCART mode VCR CAMCORDER SATELLITE SYSTEM CABLE etc If your VCR permits then connect your antenna to your VCR and VCR RF to your TV 22 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 22 7 27 2011 15 51 39 CONNECTIONS CONNECTING A HIGH DEFINITION HD SOURCE YUV High Definition HD Devices with component video output must be connected to the YUV input Connect the component video cable and audio cable not included as shown Make sure you connect the YUV Scart adaptor to this unit then connect component video cable and audio cable from the other equipment COMPONENT VIDEO OUT and AUDIO OUT to thi
3. PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 14 7 27 2011 15 51 36 UNIT OPERATION TURNING THE UNIT ON When the AC power cord is connected press the I button on the unit to turn it on Press the FUNCTION button to select the desired mode DTV ATV AV1 AV2 SCART YUV SCART DVD or HDMI Note When the unit is not going to be used for a long time disconnect the AC power supply cord from wall outlet and remove the batteries from the remote control TURNING THE UNIT ON FOR THE FIRST TIME The first time you turn the unit on it will go straight into start up screen Simply follow the screen prompts as below to tune in the channels 1 In the initial start up screen press ENTER OK to start auto tuning New Installation Please press OK to start auto tuning press EXIT for cancel 2 The system will automatically scan and store all available programs which may take five minutes or more Note If you know that Analogue TV is already switched off locally then you can skip Analogue tuning by pressing TV MENU and Channel Tuning 0 Programme s 0 Programme s 0 Programme s 0 Programme s then to confirm skip If the digital TV region choice menu appears press ENTER OK to confirm your digital TV Choose preferred country and regional options regions Primary Region England Secondary Region North West 3 After scanning has finished the TV will i Third Region display the first program store
4. Region Code 2 2 Audio Nicam Stereo Nicam Stereo Audio Output Power 2x 1 8W 2x 1 8W Power Consumption 45W standby lt 0 5W 52W standby lt 0 5W Dimension Dx Lx H 150 x 483 x 368mm 150 x 558 x 408mm with foot Weight with foot 3 9kg 4 2kg Design and specifications are subject to change without notice 32 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 32 7 27 2011 15 51 41 TROUBLESHOOTING GUIDE SYMPTOM CAUSE AND REMEDY No power e Check that the AC power cord is connected e The unit is not turned on The remote does Remove any obstacles between the remote and the unit not function e Use the remote near the unit e Point the remote at the remote sensor on the unit e Replace the batteries in the remote with new ones DVD No sound or only Make sure that you select DVD mode a very low level The system is in pause mode Press the B gt PLAY button to return to normal PLAY mode e Fast forward or fast reverse is performed Press the B gt PLAY button to return to normal play mode e Make sure the AV IN input connections is correct e The unit is too hot shut off the unit for 30 minutes to cool it down sound is heard No picture e The region number of the disc doesn t match the region number of this m The picture is e Clean the disc breaking up e The disc is scratched Severe hum or e The plugs and jacks are dirty Wipe them with a cloth slightly moistened with noise is heard alcoh
5. VENTURER 18 5 21 5 DIGITAL LCD TV DVD PLV91187S52 PLV91217S52 OWNER S MANUAL PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 1 7 27 2011 15 51 32 QUICK INSTALLATION Before you turn on your television set for the first 6 cm time be sure to place it on a solid stable surface To avoid danger do not expose the TV to water ae or a heat source e g lamp candle radiator Do lt gt not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unitas 6 illustrated below CONNECTING EXTERNAL DEVICES You can connect many different devices to the rear of the unit Please read the instruction manual for your specific connection Important Switch off the power before connecting equipment To operate the connected device first press FUNCTION TV DTV DVD AV RADIO button to select the correct mode Note Connecting cables are not supplied CAM card Source with Composite Video LABEL IDE Common Satellite Interface slot Receiver RF out OR Audio Cable To antenna or Set Top Box HD SOURCE With component video mi Satellite output Digital Cable Box R F output Satellite Receiver or external over the air HD tuner W Audio Cable Headphones Scart Cable Component iea seve 2222 Video Ca
6. e Press the ENTER OK button to watch the selected channel e Press the EXIT button to exit the PROGRAMME GUIDE menu Note Guide information display may be different according to the DTV programmes AUDIO LANGUAGE FOR DTV While watching a DTV programme you can press the r button to display the Audio Language menu and select audio language audio format and sound track e Use the a or w button to select an audio language or audio format if available press the lt or button to select soud track between L R Stereo L L Mono Left and R R Mono Right Press the ENTER OK button to confrim e Press the mz or EXIT button to exit the Audio Language menu Note For analogue TV press the r button repeatedly to select STEREO MONO Dual l Dual II Dual I II directly Audio Languages 4 English rec r sound track English audio format audio language 16 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 16 7 27 2011 15 51 36 ANALOGUE TV DTV SETUP a TV SETTING only in ATV or DTV mode 1 Press the TV MENU button 2 Use the lt or button to select Wii Aue veing gt 3 Use the A or button to select the options Auto Tuning DTV Manual Tuning gt DTV Manual Tuning ATV Manual Tuning Programme ATV Manual Tuning gt Edit adjust them using the lt or gt button Common programme Edit gt ila Signal information are only available in Senel naio gt mode 4 Press the TV MENU button to
7. press the SETUP button Parental Ctrl gt 1 Kid Safe 2 Use the a or v button to select the System Setup option Gan eS 3 Press the button to highlight the Default o Re 4 Use the a or button to select the desired setup option Ez Sime 5 To exit the SETUP MENU and return to the normal screen v8 Adult highlight the Exit Setup Mode iJ and press the ENTER OK button Parental Control DVDs are rated according to their content and some are equipped with a password function The contents allowed by parental lock level and the way a DVD is controlled may vary from disc to disc For example if the disc allows you could lockout violent scenes unsuitable for children or you could lock out playback of the disc altogether You cannot play password function equipped DVDs rated higher than the level you selected unless you cancel the parental lock function The parental lock levels are equivalent to the following ratings Level 1 Kid Safe Level 2 G Level 3 PG Level 4 PG 13 Level 5 PG R Level 6 R Level 7 NC 17 Level 8 Adult Password Use aor Y button to shift and select PASSWORD use button to Change Enter your 4 digit security code until the cursor to OK Press the ENTER OK button If you forget the password you can erase your current password by pressing number button 8 on the remote four times then press the ENTER OK button to confirm the setting PASSWORD 8 8 8 8 Default It takes 3 5 se
8. the screen Note e A B repeat can only be used within the same title If the start and end of the section to be repeated are in different titles A B repeat is cancelled e The A B repeat function does not operate in scenes where different camera angles are recorded 28 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 28 7 27 2011 15 51 40 CD DVD PROGRAMMABLE PLAYBACK PROGRAMMABLE MEMORY cD The two types of programmed playback provided by this unit are PROGRAM title chapter for DVD and track for CD Track TRACK TITLE CHAPTER PROGRAMMED PLAYBACK 1 Press the MEMORY button A screen will be shown as right 2 Press the button to highlight the Title Press the a or v button to choose the desired title Press the button again to highlight the Chapter Press the or button to choose the desired Chapter Press the ENTER OK button to confirm The highlight bar will OVD move to the next item automatically PROGRAM 3 Repeat step 2 to add up to twenty titles and chapters 1 2 3 4 02 5 6 7 Title Chapter yee 4 Press the gt PLAY button to start the programmed playback 2M on o1 e Track programmed playback for CD is like title chapter programming ao A 04 04 but just enter track numbers P z Wi PROGRAMMABLE PHOTO FILE PLAYBACK PROGRAMMED MEMORY 1 Press the MEMORY button to enter program mode Program Mode 2 Press the button to highlight the List Press the a
9. aerial installer 33 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 33 7 27 2011 15 51 41 TROUBLESHOOTING GUIDE SYMPTOM CAUSE AND REMEDY TV Bad Picture snow Check the location of the antenna and adjust it if necessary multiple images Make sure the antenna cable is firmly connected distortion blurry Make sure all input cables are firmly connected Black and white e Check the PICTURE MENU within the ANALOGUE TV DTV SETUP picture e Check to make sure the program you are watching is broadcast in Colour and not Black amp White No picture or Make sure the unit is plugged in and turned on sound e Make sure TV mode is selected e Try a new channel to check for possible station trouble e Make sure the antenna is connected properly e Increase the volume e Make sure the antenna or audio video source device is working properly e Make sure all cables are firmly connected e Check for local interference Function key Under the influence of electrostatic phenomenon the product may does not respond malfunction and require user to power reset correctly e Unplug and re plug the AC power cord No picture or Check the connection between this unit and the HDMI out jack of other sound from the equipment HDMI source Try setting the other HDMI equipment to a different video output resolution y setting the other equipment to a differe eo output resolutio such as 480p 576p 720p 1080i or 1080p and to audio outp
10. chapter track number 01 01 O B19 1 Press the GOTO button to search for your desired chapter 2 Press the lt or button to highlight a chapter track and press the corresponding number button s for the chapter you want 3 Press the ENTER OK button to confirm The unit will start playback about 3 second later LOCATING A SPECIFIC TIME You can move to a specific location by entering its corresponding time hours minutes seconds 0101 ia 1 Press the GOTO button twice 2 Press the lt or button to highlight a time and press the corresponding number button s for the setting point you want 3 Press the ENTER OK button to confirm The unit will start playback about 3 second later Note e Some discs may not respond to this process e This method of locating a title chapter is available only on a DVD disc that contains title chapter numbers e Some scenes may not be located as precisely as you specified e This method for accessing specific locations is available only within the current title of the DVD disc 27 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 27 7 27 2011 15 51 40 REPEAT PLAYBACK You can play a specific title or chapter repeatedly Title repeat chapter repeat Repeat all A B repeat Repeating a chapter DVD You can play the same chapter repeatedly 1 While the disc is playing press the REPEAT DISC button until the indicator displays on the screen The current chapter is played
11. not completely disconnect the unit from the mains supply If the equipment is not to be used for a day or more disconnect it at the wall outlet SAFE USE OF YOUR EQUIPMENT This equipment has been designed and manufactured to meet UK safety standards but like any electrical equipment care must be taken to obtain the best results from the equipment and assure your own safety Here are a few tips to help you do this READ this instruction manual before you attempt to use the equipment NEVER let anyone especially children push objects into holes ventilation slots or any other opening this could result in fatal electric shock ALWAYS disconnect the AC power cord when you are not going to use the unit for a long period of time ENSURE adequate ventilation of the equipment is not obstructed for example by curtains above or soft furnishings underneath it ENSURE that all electrical connections including the mains plug and interconnections between pieces of equipment are properly made in accordance with the instructions given Switch off the main supply when making or changing connections CONSULT your dealer if you are ever in doubt about the installation operation or safety of your equipment DON T continue to operate the equipment if it is damaged in any way or if it does not function normally Remove the mains plug and consult your dealer DON T leave equipment switched on when it is unattended unless it is part of it s normal function to
12. or v noel A000004 button to choose the desired files into the program list Press A000003 A000004 A000005 A000006 A000007 A000008 more files in the list 3 Press the gt button to select PLAY option Press the ENTER OK button to start playing the programmed list Or press the 4sz0xi080 2010971 List Play lt button to select LIST option Press the ENTER OK button to show the programmed list If you want to edit the program list press the or y button le iol le te lel iol teljel onon e w n the ENTER OK button to confirm Repeat these steps to enter A to highlight a file to Delete it or select the Delete All and EE Eee tr eonatee 2 press the ENTER OK button to delete the list Press the lt or Bytype Ascending 3 buttons to highlight Return press the ENTER OK button to Sera ea return to Program Mode ED 4 Press the YELLOW button to enter SORT FILE menu Press the a v lt or buttons to select the options and press the ENTER OK button to confirm Press the YELLOW button again to return to Program Mode Note e You can press the PAUSE button to interrupt playback and press the B gt PLAY button to resume playback Press the m STOP button to stop the playback Press MEMORY button to exit the program mode 29 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 29 7 27 201
13. repeatedly Repeating a title You can play the same title repeatedly 2 While the disc is playing press the REPEAT DISC button until the indicator displays on the screen The current title is played repeatedly To resume normal playback 3 While the disc is playing press the REPEAT DISC button until the indicator displays on the screen You can play a single track or an entire disc repeatedly Repeating a single track CD You can play the same track repeatedly 1 While the disc is playing press the REPEAT DISC button until the EZ indicator displays on the screen The current track is played repeatedly Repeating an entire disc 2 While the disc is playing press the REPEAT DISC button until the indicator displays on the screen The entire disc is played repeatedly To resume normal playback 3 Press the REPEAT DISC button until the indicator displays on the screen Repeating a specific section DVD CD You can play a specific section repeatedly 1 While the disc is playing press the REPEAT A B button at the beginning of the section is displayed you want to play repeatedly 2 Press the REPEAT A B button again at the end of the section is displayed you want to play repeatedly 3 The unit will immediately begin replaying your selection To resume normal playback 4 While the disc is playing press the REPEAT A B button until the indicator displays on
14. return to previous menu O Information repeat step 2 to adjust other settings 5 To exit the setup menu and return to the normal screen press the EXIT button e Auto Tuning Automatically scan sort and store all available programmes Tune Type DTV ATV 1 Press gt button to choose DTV ATV DTV or ATV only A 2 3 Press to enter country item Rumania Slovenia Switzerland 3 Press A V lt gt buttons to choose country then press ENTER OK button to start auto tuning DTV Manual Tuning Perform manual search for DTV Digital TV programmes e ATV Manual Tuning Perform manual search and fine tune ote epee Hea for ATV Analog TV programmes e Programme Edit All channels stored are listed in the Programme Edit menu you can edit the channels by the following steps DTV setup menu lt 4 Russian Return 1 Use the A or W button to select a channel Press the CH PAGE A Programme Edit button to skip to previous next page eas 2 Press the RED GREEN YELLOW BLUE button or the FAV button aT to edit the channel eitv2 e DELETE 10 XXX Press the RED button to delete the selected channel Press the TV 18 XXX MENU button to stop delete ma e RENAME for ATV mode only pee Press the GREEN button to rename the selected channel Use BOONE the A or W button to select the characters to represent the station 801 XXX name use the lt or gt button to move to the next character press Delete Skip FAV the T
15. the page corresponding to the subject heading PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 21 21 ANALOGUE TEXT ONLY MIX To view a page of the text whilst watching a TV programme press the MIX button The text will be superimposed over the TV programme Press the MIX button again to return to the text page PAGE SEARCH WHILST WATCHING TV In Text mode press the CANCEL button Enter the page number you want using the Numeric buttons The top line of the text page will appear whilst the text searches for your page When the page is found the number will remain in the top left hand corner of the screen DOUBLE HEIGHT TEXT If you have difficulty reading the text on the TV you can double the height of the text Press the SIZE button The top half of the page will be displayed in double height text Press the SIZE button again The bottom half of the page will be displayed in double height text Press the SIZE button again to return to the full page PAGE STOP If the page of text you have selected contains sub pages these will gradually fill up the page memory You can press cursor 4 or P to select individual sub pages or highlight the rolling page symbol 4 to read them one after another To stop the move to the next sub page press the HOLD button will appear on the top left corner of the screen To continue moving through the sub pages press the HOLD button again TO REVEAL INFORMATION Press the RE
16. you press the m STOP button twice the units memory will be cleared and pressing the B PLAY button will reset the disc to the beginning SKIPPING TO A DIFFERENT TRACK e Press the I4 PREV button to go back to previous titles chapters tracks e Press the gt gt I NEXT button to advance titles chapters tracks e For an audio CD use the number buttons on the remote control to go directly to the desired track number and press B gt PLAY 25 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 25 7 27 2011 15 51 40 CD DVD OPERATION FAST FORWARD FAST REVERSE 1 Press the SEARCH lt lt or SEARCH gt gt button when a disc is playing e The disc begins a fast scan at two times normal x2 speed e Each time the SEARCH lt lt gt button is pressed the speed of the fast scan changes gt gt x2 P gt x4 P gt x8 Dd x16 b gt x32 P 44 x2 44 x4 44 x8 44 x16 44 x32 P 2 Press the PLAY button when you have reached the desired point to resume playback at normal speed SLOW MOTION PLAY DVD 1 In Play mode press the SLOW button on remote control Each time the SLOW button is pressed the speed of slow motion playback changes in the following sequence x12 x114 x18 x116 x132 B 2 Press the PLAY button to return to the normal playback speed AUDIO SELECTION DVD On some discs the sound is recorded in two or more formats Follow t
17. 1 15 51 41 CUSTOMISING THE FUNCTION SETTINGS LANGUAGE SETUP 1 In Stop mode press the SETUP button Language Setup 2 Use the a or button to select the option Language Setup then press the button to move the highlight bar on OSD Language 3 Use the button to move the highlight bar then use the or Y button to select your preferred language and press the ENTER OK button to confirm 4 Press the lt button to go back to the previous menu Repeat steps 2 and 3 to adjust other options 5 To exit the SETUP MENU and return to the normal screen highlight the Exit Setup Mode aE and press the ENTER OK button Note e Some DVDs may not play in the audio language you selected A prior language may be programmed on the disc e Some DVDs may be set to display subtitles in a language other than the one you selected A prior subtitle language may be programmed on the disc e Some DVDs allow to change subtitle selections only via the disc menu If this is the case press the DVD MENU button and choose the appropriate subtitle from the selection on the disc menu e Some DVDs may not included your pre selected language In this case the DVD player automatically displays disc menus consistent with the disc s initial language setting OSD Language Audio gt Subtitle gt DVD Menu gt EEC VIDEO SETUP 1 In Stop mode press the SETUP button MideoiSetupi 2 Use the 4 or button to select the Video Setu
18. ENNA CONNECTING A TV ANTENNA CABLE SATELLITE To view television channels correctly a signal must be received from one of the following sources An indoor or outdoor aerial antenna RF output of a cable system RF output of a satellite system Note For receiving over the air TV broadcasts we recommend that you use an external fixed antenna Should you require the use of a temporary antenna please ensure that you purchase an antenna with sufficient ability to receive in weak signal areas Only when you are in close proximity to a transmitter will a temporary antenna reproduce a signal as strongly as a fixed antenna gt Satellite Cable RF Out or TV antenna cable to TV AERIAL CABLE Terminal cable not included CONNECTING A POWER CORD e Connect the AC power cord into a wall outlet e Press the I button on the unit or remote control to turn the TV on Note e Be sure the AC power cord is disconnected and the TV is switched off before making connections e Make sure that all the components are connected correctly Tal e When you are not going to use the unit for a long f period of time disconnect the power cord e The mains plug is used as the disconnecting device It should remain readily accessible and should not be obstructed during use To be completely disconnected from the supply mains the mains plug of the TV should be disconnected from the mains socket outlet completely
19. S PRODUCT IS AVAILABLE PLEASE CALL 0845 307 5537 MONDAY TO FRIDAY 9 AM TO 5 PM Please check and identify the supplied accessories L Remote Control with batteries L YUV SCART Adaptor TO PURCHASE REPLACEMENT ACCESSORIES FOR THIS PRODUCT PLEASE CALL 01302 784839 MONDAY TO FRIDAY 9 AM TO 4 30 PM BATTERY DISPOSAL The battery type used in this product is 2 X AAA 1 5V located in the remote and are readily accessible Batteries must not be disposed of with household waste they must be taken to your local recycling point at end of life We apologise for any inconvenience caused by minor inconsistencies in these instructions which may occur as a result of product improvement and development KESA ELECTRICALS U K George House George Street Hull HU3 6AU 811 918791W020 25 07 2011 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 35 7 27 2011 15 51 41
20. UOEOUEIGIGEOUEON unengnnamnnagunegmany E gt MMUnucgotoioncntta 75mm a emia asia T ins PES Ce 9 3 i3 i a H 1 E ry le Orn nn nnn nnn n nnn 7 Four mounting holes size M4 screw F FS TT onene UGUERLOUUNLANH 3 IMPORTANT Screws must not project more than 8mm into the TV or damage may occur For secure fixing make sure at least 4mm of the screw thread is engaged 9 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 9 7 27 2011 15 51 35 GETTING STARTED USING THE REMOTE CONTROL e Point the remote control at the REMOTE SENSOR located on the unit e When using this unit in a very brightly lit area the infrared REMOTE CONTROL SENSOR may not work properly e The recommended effective distance for using the remote control is about 16 feet 5 metres TO CHANGE THE REMOTE CONTROL BATTERIES 1 Open the battery door 2 Insert two AAA batteries BATTERY REPLACEMENT When the batteries become weak the operating distance of the remote control will be greatly reduced and you will need to replace the batteries Note e If the Remote Control is not to be used for a long time remove the batteries to avoid damage caused by battery leakage corrosion e Do not mix old and new batteries Do not mix ALKALINE standard CARBON ZINC or rechargeable NICKEL CADMIUM batteries e Corrosion oxidation battery leakage and any other gradually acidic defect of this nature will inva
21. V MENU button to confirm ok Return e MOVE for ATV mode only Press the YELLOW button and use the A or W button to move the selected channel then press the TV MENU button to confirm e SKIP Press the BLUE button to skip or not skip the selected channel e FAV Favourite Press the FAV button to set or cancel the selected channel as one of the favourite programmes A heart will appear alongside the program set as a favourite e Signal Information Display the signal information such as channel name network modulation quality and strength e Cl Information Display CAM and Smart card information select the language if available 17 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 17 7 27 2011 15 51 37 ANALOGUE TV DTV SETUP PICTURE MENU 1 Press the TV MENU button 3 2 Use the A or button to select the options Picture Mode Picture Mode ee D Contrast Brightness Colour Sharpness Tint Colour Contrast 65 Temperature adjust them using the lt or gt button The Brightness _ 50 adjustments only work in personal mode Tintonly works Golour ES 60 for NTSC video Sharpness mannaannnnna 50 3 Press the TV MENU button to return to previous menu Tint m 50 4 To exit the setup menu and return to the normal screen press the EXIT button Colour Temperature 4 Normali p gt e Picture Mode Select from four preset screen display 4 gt select Move ERENT Return settings Standard Soft Dynam
22. VEAL button to reveal concealed information quiz answers etc Press the REVEAL button again to conceal the information again 7 27 2011 15 51 38 CONNECTIONS COMMON INTERFACE There is a CI slot at top center of the cabinet which allows you to insert a CAM Conditional Access Module with an appropriate viewing card for some subscription TV services You need to subscribe to a pay channel company who administer the payments and viewing card distribution for these services Fully insert the CAM Conditional Access Module into the Cl Common Interface slot on the top of the unit with the service provider s label facing backward Thicker casing Service provider s label and gold contacts de of viewing card face backwards COMMON INTERFACE Important notes e Switch off the TV and unplug from the AC power mains before insert or remove the CAM e The CAM should be correctly inserted it is impossible to insert fully if reversed The CAM or the TV terminal may be damaged if the CAM is forcefully inserted e Some CAMs may require setting up Refer to the module instruction manual for details of the settings e If your viewing card subscription is not valid for the received service you will see a message such as SCRAMBLED PROGRAM You are not entitled to watch this program CONNECTING TO DEVICES WITH A COMPOSITE YELLOW RCA TYPE VIDEO OUTPUT To connect to A V devices such as a VCR camcorder or video game system
23. _w020R4 indd 11 9 MIX button Press to select Teletext with a ATV programme EXIT button Press to exit the menu and return directly to normal viewing lt gt buttons lt lt Fast reverse playback gt gt Fast forward playback 10 HOLD button Press to stop the automatic page change from Teletext I lt lt PREV button Press to select previous titles chapters or tracks on a disc 11 ANGLE button Press to switch the camera angle of the video presentation when scenes with multiple camera angles are recorded on a DVD SIZE button Press to set the letters size of teletext on the screen 12 SUBTITLE button Press to select one of the subtitle languages programmed on a DVD 13 TITLE Button Press to select the title menu screen 14 GOTO button Press to skip directly to a specific location on a DVD CD 15 COI II button Press to directly select STEREO MONO Dual I Dual Il Dual II in ATV mode Enter Audio Language menu in DTV mode 16 TEXT button Press to directly selects Teletext mode 17 TIME button Enter and exit the TIME menu 18 SLEEP button Press to set the SLEEP timer The unit will remain ON for the time that is set and will automatically shut off afterwards 19 MEMORY button In stop mode press to enter the number of a selected chapter or track 20 CLEAR button Press to clear input selections and cancel certain playback functions 21 REPEAT A B button Press to perform point to point repeat playback
24. a mains socket otherwise a dangerous electric shock could result 2 If the fuse in the fitted mains plug should fail replace it with a BS1362 approved fuse rated at 5A Never use the plug without the fuse cover fitted WIRING A MAINS PLUG As the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug proceed as follows e The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red The wires in this mains lead are e No connection is to be made to the earth terminal of the plug which is marked with oloured in accordance with the L following code the letter E or coloured green or green and yellow or marked by the safety earth symbol BLUE NEUTRAL BROWN LIVE The standard BS1363 mains plug must be fitted with a 5 Amp fuse approved to BS1362 If any other plug or connection is used a 5 Amp fuse must be fitted in the plug or in the distribution board Caution Moisture Condensation If the equipment is moved from a cold place to a warm one water in the air will condense on some parts and may cause damage or malfunction if the equipment is operated Allow at least two hours for the equipment to acclimatise before switching it on Please note that when the STANDBY ON switch is in the standby position this does
25. ating a single track whole disc CD 28 Repeating a specific section DVD CD 28 CD DVD PROGRAMMABLE PLAYBACK 29 Programmable memory s eceeeeeeeees 29 Track Title chapter programmed playback 29 PROGRAMMABLE PHOTO FILE PLAYBACK 29 CUSTOMISING THE FUNCTION SETTINGS Language setup Video SELUP sessssseicsccvessessbesssssuvenesrseseoseees System SEtUP Sis sssscssecesv essed sonsesezaseaiedene MAINTENANCE cssseeeesccessesssnsecceeees 32 SPECIFICATION cssscsescsessssscsssssesesnsssesens 32 TROUBLESHOOTING GUIDE 33 34 USE OF PIRATED COPIES s scsscssssessreeees 35 7 27 2011 15 51 34 DISC FORMATS This unit can playback DVD DVDS diet AUDIO CDS CD R CD RW m 8CM 12CM DISC eaa BCM 12CM DISC Compatible REGION MANAGEMENT INFORMATION Region Management Information This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs If the Region number printed on the DVD disc does not correspond to the Region number of this unit this unit cannot play that disc The region number of this unit is DISC FUNCTION OR OPERATION THAT IS NOT AVAILABLE When the symbol appears on the screen it indicates that the function or operation attempted is not available at that time This occurs because the DVD disc manufacturer determines the specific functions Certain functions may not be available on some discs Be sure to read the docum
26. ble H Source with Scart output BA E G DVD VCR Set Top Box Ateptor Satellite Receiver HD SOURCE To wall outlet with HDMI output PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 2 7 27 2011 15 51 34 SAFETY PRECAUTIONS CAUTION The lightning flash with an arrowhead within RISK OF ELECTRIC SHOCK A a triangle alerts you to uninsulated dangerous DO NOT OPEN voltage within the product s enclosure that could cause an electric shock WARNING TO REDUCE THE RISK OF ELECTRIC The exclamation point within a triangle alerts SHOCK DO NOT REMOVE COVER OR BACK you to the presence of important operating NO USER SERVICEABLE PARTS INSIDE REFER maintenance and servicing instructions in SERVICING TO QUALIFIED PERSONNEL this user s manual CAUTION DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE DO NOT MIX OLD AND NEW OR DIFFERENT TYPES OF BATTERY IF THE PRODUCT IS NOT TO BE USED FOR A PROLONGED TIME REMOVE THE BATTERIES AS ELECTROLYTE LEAKAGE WILL DAMAGE THE PRODUCT AND WILL INVALIDATE THE WARRANTY A This product contains a ik bol een CAUTION low power laser device o Do Ral o wA ass INVISIBLE LASER RADIATION WHEN leas aids OPEN AND INTERLOCKS DEFEATED AVOID EXPOSURE TO BEAM This symbol means that the unit CLASS 1 LASER rf PRODUCT complies with European safely and electrical interference directives SAFETY INFORMATION e When co
27. conds to reset the unit to the factory default 31 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 31 7 27 2011 15 51 41 MAINTENANCE CLEANING THE DISC A defective or dirty disc inserted into the unit can cause sound to drop out during playback Handle the disc by holding its inner and outer edges e Do NOT touch the surface of the unlabeled side of the disc e Do NOT stick paper or tape on the surface of the disc e Do NOT expose the disc to direct sunlight or excessive heat lt e Clean the disc before playback Wipe the disc from the center outward with a cleaning cloth e NEVER use solvents such as benzene or alcohol to clean the disc e Do NOT use irregular shape discs example heart shaped octagonal etc They may cause malfunctions CLEANING THE UNIT e Be sure to turn the unit off and disconnect the AC power cord before cleaning the unit e Wipe the unit with a dry soft cloth If the surfaces are extremely dirty wipe clean with a cloth which has been dipped in a weak soap and water solution and wrung out thoroughly Then wipe it with a dry cloth e Never use alcohol benzine paint thinner cleaning fluid or other chemicals Do NOT use compressed air to remove dust IMPORTANT NOTE Before shipping the unit remove any disc from the disc compartment SPECIFICATION Model PLV91186S52 PLV91216S52 Operation Voltage AC230V 50Hz AC230V 50Hz TV Broadcasting PAL B G D K 1 PAL B G D K I
28. current angle available 2 Press the ANGLE button repeatedly to change the scene to ETA the next angle in those recorded e About two seconds later playback continues from the new Sequence of angle shots angle you selected Example elf no button is pressed within 10 seconds playback continues without changing the current angle Note e This function can only be used for discs on which scenes shot from multiple angles have been recorded e If only one angle is recorded is displayed 26 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 26 7 27 2011 15 51 40 SPECIAL FUNCTIONS DISPLAY While the disc is playing press the DISPLAY button repeatedly to display information on operation status amp J 01 01 1 02 19 Title Elapsed 00 07 13 amp J 01 01 1 02 19 Title Remain 02 07 13 01 01 0 02 19 Chapter Remain 35 16 13 G Op Others 1 2 00D 2CH h LOCATING A SPECIFIC TITLE DVD If a DVD disc contains title numbers you can locate a specific title by directly selecting its title number wo YET 1 Press the GOTO button 2 Press the lt or button to highlight a specific field and press the corresponding number button s for the title you want 3 Press the ENTER OK button to confirm The unit will start playback about 3 second later LOCATING A SPECIFIC CHAPTER TRACK If you know the chapter track number you want to play you can locate a specific chapter track by directly selecting a
29. d You may receive signals from more than one region Use lt gt to choose then OK to select each option in turn DTV region menu 15 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 15 7 27 2011 15 51 36 UNIT OPERATION ELECTRONIC PROGRAMME GUIDE EPG FOR DTV While watching a DTV programme you can press the GUIDE button to display the PROGRAMME GUIDE menu name and channel number of the selected programme highlighted in blue running time and name of the selected programme highlighted in blue current date PROGRAMME GUIDE and time broadcasting m Supernatural programme date is highlighted green f feaa f 8Outof10 Cats The Kevin Bishop Show 4M programme time 6 ITV2 The Dukes o channel no E Wire in The Blood programme name 13 Channel 4 1 You Have Been Watching 8 Out o 14 More 4 Ture Stories Deliver Us from Evil channel name e Press the or to scroll through the programmes of different channels Press the lt or to skip to the programmes of different periods Note Programme names in GREEN indicates that these programmes are now broadcasting on different channels e Use the a V 4 or gt or button to select a programme press the INFO button to display detailed information if available Press the INFO button again to return e Press the YELLOW button to view the programme list of the next date press the GREEN button to view the programme list of the previous date
30. e are stored Treble Adjust the treble range Bass Adjust the bass range Balance Adjust the balance level toward the left or right speakers Audio Description Audio description AD is an extra feature of some TV services which gives a helpful verbal description of the visual scene Check your TV listings to see if AD is available for any desired program e AD Volume Adjust the relative volume of Audio Description AD Note You can also select Sound Mode simply by pressing the SOUND button on the remote control Audio Description lt lt Off gt AD Volume 80 18 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 18 7 27 2011 15 51 37 ANALOGUE TV DTV SETUP 2 TIME MENU Press the TV MENU button 1 2 3 4 5 O SETUP MENU I 2 3 4 5 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 19 Use the or button to select the Clock Use the A or W button to select the options Clock Sleep Timer Sleep Timer Time Zone Power Save adjust them timeZone London GMT using the lt 4 or gt button Press the TV MENU button to return to previous menu To exit the setup menu and return to the normal screen press the EXIT button Power Save 4hours Clock The clock is set automatically when receiving a digital signal Sleep Timer Select the time to turn the unit to Standby mode automatically Off gt 5min gt 90min gt 120min Time Zone Select your time zone Pow
31. ecommend short frequent breaks rather than occasional longer breaks for example a 5 10 minute break after an hour of continuous screen work is likely to be better than a 15 minute break every 2 hours Do not use the monitor against a bright back ground and where sunlight or other light sources will shine directly on the screen H D M This Television incorporates High Definition Multimedia Interface HDMI technology HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 6 7 27 2011 15 51 34 TABLE OF CONTENTS QUICK INSTALLATION ccscceseeeeeeeeeeees 2 SAFETY PRECAUTIONS c cecsscescsssceeeseees 3 IMPORTANT SAFETY INSTRUCTIONS 4 6 TABLE OF CONTENTS scccecsssceessceeereceecees 7 DISC FORMATS cccsssessecseessssseececsesscesseeee 8 INSTALLATION cceccesceeseeccecceessesceeseessecseesoees 9 GETTING STARTED s0ccccsecsscserscsesssceeeee 10 REMOTE CONTROL REFERENCE GUIDE E T T 11 12 REFERENCE GUIDE cccseessssccesscsscsceeeee 13 CONNECTING A TV ANTENNA 0000000000 14 CONNECTING A POWER CORD c00000008 14 UNIT OPERATION ccceecceesersoeeeeeees 15 16 Turning the unit on for the first time 15 Electronic Programme Guide EPG for DTV AAE EEAO ATEREA EE AAEE EAE SS 16 Audio Language for DTV sses 16 ANALOGUE TV DTV SETUP 17 20 TV Setting se
32. een recorded with Dolby Digital Not all Dolby Digital sources are recorded with 6 channels Some sources marked Dolby Digital may be recorded in Dolby Surround a 2 channel system Look Q DOLBY for this logo on your unit Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 24 24 DIGITAL 7 27 2011 15 51 39 CD DVD OPERATION This instruction manual explains the basic instructions of this unit Some DVDs are produced with limited operation during playback For example many DVDs do not allow users to skip government warnings or in some cases previews or other features This is not a defect in the unit Refer to the instruction notes of discs may appear on the screen during operation A means that the desired operation is not permitted by the unit or disc PLAYING A DISC 1 Press the I button to turn the unit on 2 Press the FUNCTION button repeatedly to select DVD mode or directly to press DVD button on the remote See CUSTOMISING THE FUNCTION SETTINGS before proceeding to step 3 3 Push down the w knob to open the disc door 4 Hold the disc by its edge and gently push it onto the spindle with the label side facing the front until you hear a click 5 Push disc door gently to close it It takes a short while for your unit to load the disc After loading the unit
33. entation provided with the DVD ICONS USED ON DVDS zren H Language selections for audio ee Icons brean H Language selections for subtitles e When playing back a CD G Graphics or CD EXTRA p Screen aspect ratio images will not be shown L_ Region code indicator disc the audio portion will be played but the graphic Multiple camera angles TITLES CHAPTERS AND TRACKS e DVDs are divided into titles and chapters If E l the disc has more than one movie on it each movie g E j would be a separate title Chapters are sections Chapter D CChapter2CChapter3 Chapter D Chapter 2 of titles e Audio CDs are divided into tracks A track is i i usually one song on an Audio CD Laad Crack D Crack Gak Gad ote e Numbers identify each title chapter and track on a disc Most discs have these numbers recorded on them but some do not Notes on Unauthorized Discs You may not be able to play back some DVD discs on this unit if they were purchased from outside your geographic area or made for business purposes NOTES ON COPYRIGHT It is forbidden by law to copy broadcast show broadcast on cable play in public or rent copyrighted material without permission Apparatus Claims of U S Patent Nos 6 836 549 6 381 747 7 050 698 6 516 132 and 5 583 936 licensed for limited viewing uses only This product incorporates copyright protection technolog
34. er Save Power Save is the function to automatically switch from the ON state to the Sleep state after a period of time without user input Select the power save time to Off gt 1hour gt 2hours gt 4hours gt 8hours Note This product is currently set to Power Save Mode It will not receive TV signal after 4 hours of inactivity Press the TV MENU button os Use the lt or gt button to select the O x Use the A or W button to select the options OSD an FORENE gt een g Language Audio Language Subtitle Language Restore Audio Language A Enishi Setting OAD adjust them using the lt or gt button Subtitle Language lt 4 English gt Press the TV MENU button to return to previous menu Restore Setting gt To exit the setup menu and return to the normal screen gap gt press the EXIT button OSD Language Select your preferred On Screen Display language Press A V lt gt button to select language item Audio Language Select your preferred audio language Available for digital channels if multiple audio languages are broadcasted Subtitle Language Select your preferred subtitle language or turn off subtitle Available for digital channels if multiple subtitle languages are broadcasted Restore Setting Press the ENTER OK button to restore the system settings to the factory default OAD Over Air Download Select to enable disable OAD Over Air Download feature This should normally be Se
35. g time Batteries left in equipment may cause damage through deterioration and corrosive leakage invalidating the guarantee To protect the environment please use local recycling facilities for battery disposal PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 5 7 27 2011 15 51 34 CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type Warnings e To prevent electric shock do not remove any cover e If anything goes wrong don t try and fix it yourself get a qualified service agent to look at it e The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus No naked flame sources such as lighted candles should be placed on the apparatus Pull the mains plug out of the wall socket and disconnect the aerial lead during thunderstorms To prevent injury this television must be securely attached to the wall or it s supplied stand in accordance with the installation instructions This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application such as for none domestic use or in a commercial environment e If the mains cable is damaged it must be replaced by the manufacturer its service agent or similarly qualified person to avoid a hazard Eye Fatigue When using this product as a computer monitor health and safety experts r
36. hannel list in ATV DTV mode b gt PLAY button Press to start and resume playback of a disc GUIDE button Press to display the Electronic Programme Guide EPG in DTV mode Il PAUSE button Press to pause playback and single frame advance INFO button Press to display the channel information in DTV mode 30 1 SLOW button Press to play a DVD in slow motion INDEX button Press to select the page number of the index from Teletext in ATV mode 31 AUDIO button Press to select audio soundtracks of a DVD or change the output mode of a CD CANCEL button Press to cancel the Teletext menu 32 DVD MENU button Press to enter the main menu of the disc you are watching 33 SETUP button Press to enter and exit the SETUP menu of the DVD player 34 SOUND button Press to select from preset sound settings Standard Music Theatre Voice Personal to match the type of show you are watching 35 DISPLAY button Press to change disc status information displayed on the screen 36 PICTURE button Press to select from preset screen display settings to match the type of show you are watching Standard Movie Dynamic Soft Personal 37 LCD MODE button Press to set the size of LCD display or turn it off to save power when listening to radio services 38 RED GREEN YELLOW BLUE button Press to select the relevant page quickly from Teletext 7 27 2011 15 51 35 REFERENCE GUIDE FRONT TOP amp SIDES VIEW
37. he directions below to select the type of playback 1 While a disc is playing press the AUDIO button to show the current audio format number DO D6CH English 1 3 2 Press the AUDIO button repeatedly to select the desired audio format Note e If only one audio format is recorded the number does not change e About two seconds later playback continues in the new audio format SUBTITLE SELECTION DVD 1 While a DVD is playing press the SUBTITLE button to display the current language setting 2 Press the SUBTITLE button repeatedly to select the desired subtitle language ito e If only one language is recorded the language does not change Subtitle English 1 5 e About two seconds later playback continues with the new subtitle you selected e The number of languages recorded differs depending on the disc e If no button is pressed within a few seconds playback continues without changing the current subtitle e This function can only be used for discs on which subtitles have been recorded in multiple languages e On some DVDs subtitles are activated from the main menu of the DVD Press the DVD MENU button to activate the main menu ANGLE SELECTION DVD Some DVDs contain scenes which have been shot from a number of different angles For these discs the same scene can be viewed from each of these different angles 1 While you are playing a DVD with different angles recorded press the ANGLE button to view the number of the
38. ic and Movie or select Personal in which your own settings of Contrast Brightness Colour and Sharpness are stored e Contrast Adjust the contrast of the picture The black portions of the picture become richer in darkness and the white become brighter Brightness Adjust the brightness of the picture Colour Adjust the colour of the picture Sharpness Adjust the sharpness level to improve detail in the picture Tint only for AV mode with NTSC signal Adjust the tint of the picture Colour Temperature Select the colour temperature of the picture Select Normal balanced Warm red white Cool blue white mode Note You can also select Picture Mode simply by pressing the PICTURE button on the remote control A SOUND MENU 1 Press the TV MENU button 2 Use the lt or P button to select the A 3 Use the A or W button to select the options Sound Sound Mode lt Standard gt Mode Treble Bass Balance Audio Description AD Treble funeeneneme 50 Volume adjust them using the lt or gt button Bass eee 50 4 Press the TV MENU button to return to previous menu Balance n 9 5 To exit the setup menu and return to the normal screen press the EXIT button Experiment with different sound settings until you find the settings you prefer e Sound Mode Select from four preset sound settings Standard Music Theatre and Voice or select Personal in which your own settings of Treble Bass and Balanc
39. lidate the guarantee e When discarding batteries environmental problems must be considered and local rules or laws governing the disposal of these batteries must be strictly followed A WARNING e Do not dispose of batteries in a fire or they may leak and or explode e The battery shall not be exposed to excessive heat such as sunshine fire or the like e Danger of explosion if batteries are incorrectly replaced Replace only with the same or equivalent type PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 10 7 27 2011 15 51 35 REMOTE CONTROL REFERENCE GUIDE 1 2 3 4 5 6 8 STANDBYION z Z 6 a 5 2 1 O 275000 E mow s EN pe 2 5 PAGE Q C 2R Q B TOYO 15 GQ CIC ea Go 19 v Gt 20 EA N gt 7 STANDBY ON button Press to turn ON the unit or put it in STANDBY OFF mode TV DTV button Press to switch to ATV DTV mode DVD button Press to select DVD mode Number 0 9 buttons Use to change the ATV DTV channels REVEAL button Press to reveal answers on a quiz or game pages from Teletext MUTE button Press to mute the sound Press again to cancel mute VOLUME buttons Press to adjust the volume level CURSOR F A lt 4 gt buttons Press to highlight selections on a menu screen and make adjust certain settings ENTER OK button Press to confirm selections on a menu screen PLV91187S52 amp 91217S52_IB_VEN
40. mation system that displays text on your TV screen Using the Teletext control buttons you can view pages of information that are listed in the teletext index Analog and Digital text look very different and operate differently Please Note Teletext is only transmitted on some channels You will only be able to enter Teletext on these TO ENTER TEXT MODE For Analogue text press the TEXT button in ATV mode For digital text press the TEXT button in DTV mode The text page will appear normally the index page TO EXIT TEXT MODE Press the TEXT button The TV will return to the channel you were watching TO SELECT A PAGE OF TEXT Find the number of the page in the index and enter it using the Numeric buttons The number of the page will appear on the top corner of the screen The page counter will search for your page When it finds it the page will be displayed To move to the next page of text press the CH PAGE v button To move to the previous page press the CH PAGE A button To return to the index page enter the 100 by using the Numeric buttons For Digital Text you can also use the cursor A and TV MENU buttons to select pages FASTEXT At the bottom of the teletext screen is a row of subject headings in red green yellow and blue The remote control has a row of colour buttons corresponding to the row of coloured subjects on the screen Pressing one of the colour buttons will take you directly to
41. ngle digital connection for use with DVD players DTV set top boxes and other digital AV devices HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection HDCP as well as Digital Visual Interface DVI in one specification HDCP is used to protect digital content transmitted and received by DVI compliant or HDMI compliant displays HDMI has the capability to support standard enhanced or high definition video plus standard to multi channel surround sound audio HDMI feature include uncompressed digital video a bandwidth of up to 2 2 gigabytes per second with HDTV signals one connector instead of several cables and connectors and communication between the AV source and AV devices such as DTVs HDMI the HDMI logo HIM and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC Connect the HDMI cable not included as shown Make sure you connect the cable from the equipment HDMI OUT to this unit HDMI IN To operate the connected device and play the source first press the FUNCTION button to select the HDMI mode Note It is not recommended to use HDMI cables longer than 2 mas this may affect the HDMI performance SOUND SYSTEM DOLBY DIGITAL For DVD HD SOURCE with HDMI output 1D To HDMI IN jack Dolby Digital is a sound system developed by Dolby Laboratories Inc This unit automatically recognizes DVDs that have b
42. nnecting or disconnecting the cord grip the plug and not the AC cord itself Pulling the cord may damage it and create a hazard e When you are not going to use the unit for a long period of time disconnect the AC cord e The mains switch does not disconnect the product from the mains completely to do this you must remove the mains plug from the socket outlet e The mains plug shall be the main disconnect device and shall remain operable at all times e Only use this apparatus in moderate climates e Under the influence of electrostatic phenomenon the product may malfunction and require user to power reset CONDENSATION INFORMATION e When left in a heated room where it is warm and damp water droplets or condensation may form inside the unit When there is condensation inside the unit the unit may not function normally Let the unit stand for 1 2 hours before turning the power on or gradually heat the room and let the unit dry before use RATING PLATE LOCATION e The rating plate is on the rear of product PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 3 7 27 2011 15 51 34 IMPORTANT SAFETY INSTRUCTIONS This unit is designed to operate from a 230V AC 50Hz mains supply MAINS PLUG UNITS SUPPLIED WITH MOULDED MAINS PLUG 1 If the mains plug fitted to the AC cord supplied is not suitable for your mains outlet it may be necessary to cut it off Carefully dispose of the severed plug Under no circumstances must it be inserted into
43. ol e Clean the disc The disc does not There is no disc inside No Disc appears on the screen play e Insert the disc correctly with the playback side facing frontwards e Clean the disc e A non valid disc has been inserted The unit and disc region number are incompatible e Condensation may have formed inside the unit due to a sudden change in temperature Wait about an hour for it to clear and try again TV Why have lost e It happens sometimes if you have a weak signal Usually it just means some all of my you ll need to rescan your digital box or TV Don t worry it easy to do And channels once you ve done it you should get all the Freeview channels available to you If problems persist you may need to get your aerial checked Talk to your retailer or contact your local aerial installer Why do get In most cases blocking is caused by a reception problem either the signal blocking on my is too weak or there is some kind of interference Talk to your retailer or digital picture contact your local aerial installer What type of If you are installing a new aerial we recommend a wideband rooftop aerial aerial do need rather than a loft aerial Loft aerials generally receive a weaker digital signal and are more likely to get interference from other electrical equipment in the home We suggest you have an aerial survey done before getting an aerial upgrade Talk to your retailer or contact your local
44. on a DVD or CD REPEAT DISC button Repeat chapter of a DVD Repeat single track or whole CD 7 27 2011 15 51 35 REMOTE CONTROL REFERENCE GUIDE STANDBY ON FUNCTION OH 22 TviTV DVD AV RADIO 23 OOO 3 EDIEDIED 4 3 C8 E Ce sai me OQ voL C 28 EE SUDE Fan 29 See SUBTITLE cance NEX i 30 ie Se Sane om 31 2 943 ii 34 TIME SLEEP LCDNM D S F pon clear AE E 37 T REPENT 38 ave 22 FUNCTION button Press to switch between DTV ATV AV1 AV2 SCART YUV SCART DVD or HDMI 23 RADIO button Press to select DTV digital radio programmes Press again to exit to normal DTV programmes mode 24 AV button Press to select source connected to AV1 AV2 SCART 25 LAST CH button Press to switch repeatedly between the last two channels displayed 26 TV MENU button Press to display the on screen TV menu 27 CH PAGE A buttons Press to change the ATV DTV channels Press to go forward or backward the page of Teletext screen in ATV mode Press to go forward or backward the page of Programme Edit amp Favourite in ATV DTV mode 28 FAV button Press to display the favourite programmes list in ATV DTV mode You should set up your favourite ATV DTV channels in Programme Edit menu PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 12 NEXT gt gt I button Press to select next title chapter or track on a disc 29 E STOP button Press to stop playing a disc LIST button Press to display the c
45. ons such as wet or damp places high humidity strong vibration extremely high or low temperatures strong sunlight and places that are very dusty Don t continue to use your television if you have spilt liquids in it if it is damaged in any way or if it does not work normally Immediately unplug the television and get expert advice Switch off mains power or pull out the power plug when you leave the television unattended unless the function of the television requires a continuous power supply Protect the screen from fingerprints This product is designed for domestic use only Commercial or any other use may invalidate the guarantee and might be dangerous Ventilation Place the television on a hard flat surface away from direct sunlight and heat sources If it is in a cabinet allow at least a 10cm gap all around Don t obstruct the ventilation slots including those underneath with soft furnishings Overheating will shorten the life of the television and increase the risk of fire Cleaning Disconnect the mains supply and use a lightly dampened soft cloth Do not use chemical solvents or strong detergents as these may damage the cosmetic surfaces or the screen Never allow water droplets to remain on the screen as moisture can cause permanent discolouration Greasy marks must only be removed with a commercial cleaner specifically recommended for LCD screens Batteries Remove batteries when the television is not to be used for a lon
46. operate in your absence for example a video cassette recorder with timed recording facility LISTEN to headphones at moderate volume levels high volume levels can permanently damage your hearing Connect the headphones with the volume set low and increase it to a comfortable listening level Prolonged listening through some headphones at high volume levels can cause hearing damage PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 4 7 27 2011 15 51 34 Mains supply This television is designed to operate from a 230 Volts 50Hz AC mains supply Other power sources may damage it Check that the rating label states 230V AC before you plug it in for the first time Mains plug We have fitted this television with a standard mains plug e If for any reason you cut off the mains plug please destroy the old plug as it would be dangerous if inserted into a live power outlet Carefully follow the wiring instructions supplied with the new plug e If a fuse is fitted to the plug remove the fuse before throwing the plug away e Never use a fused mains plug without the fuse cover Safe use and care of your television We have designed and made this television to meet European safety standards but as with any electronic equipment you must take care to stay safe and get the best results Here is some good advice to help you do this Protect the mains lead You must make sure the mains lead cannot be walked on crushed chafed or cut Avoid harsh conditi
47. p TV Type Pan Scan 3 Press the button to highlight the TV TYPE and then press the E Gansen gt button to enter the desired TV type 4 Use the a or button to select the desired TV type and press Hil the ENTER OK button to confirm 5 To exit the SETUP MENU and return to the normal screen highlight the Exit Setup Mode IEJ and press the ENTER OK button TV Display Cut off when a wide screen Pan Scan video image is nlaved e When wide screen video is played this mode clips the right and left sides of the image so that it can be viewed on a conventional screen e Some wide screen DVDs that do not permit Pan Scan playback are automatically played in Letter Box mode black bands at top and bottom of screen Letter Box e When wide screen video is played in this mode on a conventional screen black bands appear at the top and bottom of the screen Wide screen e This is the correct mode for playing wide screen videos on a wide screen Note e The displayable picture size is preset on the DVD discs Therefore the playback picture of some DVDs may not conform to the picture size you select e When you play DVDs recorded in the 4 3 aspect ratio the playback picture will always appear in the 4 3 aspect ratio regardless of the TV shape setting Wide screen 30 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 30 7 27 2011 15 51 41 CUSTOMISING THE FUNCTION SETTINGS SYSTEM SETUP System Setup 1 In Stop mode
48. rieren a R 17 Picture Menu eis cose ces seats saceeseces eekecdesteeuennes Sound MENU cscsssccteceestseevien coaesscecies set Time Menu Setup MENU enspaci ronan nE niet Gees LOCK MENU hopes meree TELETEXT 00006 CONNECTIONS secsecssssssssseeseeseeceeee Common Interface n se 22 Connecting to devices with a composite yellow RCA type video output 22 Connecting to sources with scart 22 Connecting a High Definition HD Source YU wsscsesbastebssatedosidb sossasacutesveacsacevencepannes 23 Using Headphones cccceceeeeeenees 23 Connecting HDMI ssisisceucsstssesoteszsseveesesdins 24 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 7 SOUND SYSTEM cscccsessessessecseesesssevesseees 24 CD DVD OPERATION s00000seeeee 25 26 Playing a CISC cesen 25 Playing a picture file disc oe 25 Pausing playback still mode 25 Stopping playback oe eeeeeeeteeeees Skipping to a different track Fast forward fast reverse e Slow motion play DVD uu Audio selection DVD sses Subtitle selection DVD eee Angle selection DVD eeeeeeeeeeeeeeeee SPECIAL FUNCTIONS 0 ccecccceeerseseeeeees Display function cee eet eeteeeteeeeeee Locating a specific title DVD ee 27 Locating a specific chapter track 0 0 0 0 27 Locating a specific time sesser 27 REPEAT PLAYBACK 0cccccssssessssccsssecccees 28 Repeating a chapter title DVD 0 28 Repe
49. s unit SCART and AUDIO IN To operate the connected device and play the source first press the FUNCTION button to select the YUV SCART mode To AUDIO AUDIO IN OUT jacks L HD SOURCE s B a With i E Digital Cable Box Satellite p gt Receiver or external gt n d CE VIDEO IN over the air HD Tuner Aiea OUT To AUDIO IN jacks To COMPONENT VIDEO OUT jacks May require a subscription for receiving HD channels Check with your cable satellite service provider for details To SCART jacks al gt gt _ gt YUV SCART adaptor included Note When connecting a DVD player to the television the picture resolution is dependent upon the resolution of both the DVD player and the TV For best results select the highest resolution of the DVD up to the TV maximum of 1080i USING HEADPHONES Turn down the volume before connecting headphones to the unit then adjust the volume to your desired level e When headphones are connected no sound will come from the front speakers Maximum output Fali voltage lt 150mV 1 8 E 5mm diameter plug CAUTION Excessive sound pressure from earphones and headphones can cause hearing loss 23 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 23 7 27 2011 15 51 39 CONNECTIONS CONNECTING HDMI HDMI High Definition Multimedia Interface supports both video and audio on a si
50. t to ON to allow the TV to be automatically updgraded if this is needed from time to time 19 7 27 2011 15 51 38 ANALOGUE TV DTV SETUP LOCK MENU IM A 1 Press the TV MENU button 3 lt 2 Use the lt or gt button to select the 2 Fock System Cii la i Change Password 3 Press the W button to highlight Lock System then T cae press ENTER OK or lt or gt to enter enter password to se Parental Guidance Off proceed The default password is 0000 4 Use the A or button to select the options Lock System Change Password Block Programme Parental Guidance press the ENTER OK or 4 gt button to 4 sect S Move Maem adjust 5 Press the TV MENU button to return to previous menu 6 To exit the setup menu and return to the normal screen press the EXIT button e Lock System Select to lock or unlock the programmes e Change Password If you change the password remember your password If you forget the password enter 8888 to unlock parental control Block Programme Enter the Block Programme menu press the A or W button to select a channel press the GREEN button to Lock or Unlock the channel e Parental Guidance Select a censorship level to censor and block the programmes Note This system will only work if the correct information is transmitted by the TV channel 20 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 20 7 27 2011 15 51 38 TELETEXT Teletext is an infor
51. ut type PCM To do this you may need to watch the picture from the source equipment with the scart or AV input of the TV or on another TV e Replace the HDMI cable with a better one Bad HDMI cable or very long cable gt 2m can cause data lost 34 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 34 7 27 2011 15 51 41 USE OF PIRATED COPIES OF FILMS AND MUSIC WITH DVD PLAYERS e Most modern DVD players are capable of playing various types of DVD recordable discs media which are currently available such as DVD R DVD R DVD RW and DVD RW e Details can normally be found in the player s instruction book or on the outside of the box Unless it is indicated on the label the type of disc can not easily be identified Pirated copies of music and films are becoming widely available Many copies are recorded il legally using software to remove copy protection and recorded on sub standard discs This can cause problems when trying to play these back on DVD players Known problems include failing to load at all pictures freezing or breaking up pictures dark or fuzzy incomplete additional scenes sound breaking up e No guarantee is given or implied that pirated copies will play on this DVD player therefore products will not be exchanged or refunded if the only problem identified is failing to play illegal copies e This does not effect your statutory rights TECHNICAL HELP ON THE OPERATION OF THI
52. will automatically either bring you to the main menu of DVD or start playing the DVD If the unit does not automatically start playing the DVD press the B gt PLAY button PLAYING A PICTURE FILE DISC This unit can play picture files recorded on CD R and CD RW discs 1 Push down the w knob to open the disc door 2 Hold the disc by its edge and gently push it onto the spindle with the label side facing the front until you hear a click 3 Push the door gently to close it The picture files on the disc will be displayed one by one automatically 4 Press the m STOP button to go to the folder list 5 Press the a or button to highlight a file to play Press the B gt PLAY button to start playback Note e You can press the m PAUSE button to interrupt playback and press the B gt PLAY button to resume playback e You can press i44 or gt gt I to list the previous or next block of files e You can use the numbered buttons to enter the image number to quickly select any image e Press the ANGLE button on the remote control to rotate the picture by 90 PAUSING PLAYBACK STILL MODE Press the PAUSE button To resume normal playback press the B gt PLAY button Each time you press the PAUSE button the picture advances one frame on DVD STOPPING PLAYBACK Press the m STOP button at the location where you want to interrupt playback To resume playback at the position where the disc was stopped press the B gt PLAY button If
53. y that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited 8 PLV91187S52 amp 91217S52_IB_VEN_w020R4 indd 8 7 27 2011 15 51 34 INSTALLATION INSTALLING REMOVING THE STAND WARNING The LCD Display is very fragile and must be protected at all times when installing removing the stand Be sure that no hard or sharp object or anything that could scratch or damage the LCD display comes into contact with it Do NOT put pressure on the front of the unit at any time because the screen could crack 1 Disconnect any cables or cords connected to the unit 2 Lay the unit down on a flat surface so the back is facing up making sure to place a soft cushioned material such as a pillow or thick piece of foam beneath the screen 3 Install remove the two screws and then install remove the STAND to from the TV qn MOUNTING ON THE WALL This unit is VESA compliant and is designed to be wall mounted with a VESA compliant 75mm x 75mm mounting kit designed for flat panel TVs sold separately Mount this unit according to the directions included with the mounting kit Note Remove the stand before mounting the unit on the wall SO Sr HHOUG
Download Pdf Manuals
Related Search