User`s Manual
Contents
1. sharpshooter La User s Manual SharpShooter SS 100 Smith Eastern Corporation 10630 S Riggs Hill Road e Jessup Maryland 20794 9425 USA 301 497 7600 e 800 937 HVLP 4857 e Fax 301 497 7613 info airverter com e www airverter com Compliance e Quality e Performance e Reliability 2000 Smith Eastern Corporation Ain erter SharpShooter HVLP Paint Spray System Please Read This Owner s Manual BEFORE Using Your SharpShooter Spray Gun DO NOT OPERATE THIS EQUIPMENT WITHOUT USING PROPER PERSONAL SAFETY EQUIPMENT INCLUDING RESPIRATOR GOGGLES AND SAFETY CLOTHING OBSERVE ALL PRECAUTIONS RELATED TO SPRAYING WARNING THIS EQUIPMENT IS OPERATED USING PRESSURIZED AIR ALWAYS DISCONNECT SPRAY GUN FROM AIR AND FLUID HOSES AND DEPRESSURIZE SYSTEM PRIOR TO ANY MAINTENANCE OR DISASSEMBLY PROCEDURE WARRANTY Smith Eastern Corporation warrants to the Purchaser that the SharpShooter SS 100 Spray Gun is free from defects in material or workmanship under normal use and service for a period of twelve 12 months from the date of purchase Should any failure appear during this period Smith Eastern shall if given prompt written notice by the Purchaser correct such nonconformity by repair or replacement of the nonconforming part F O B Smith Eastern s repair facility Repair parts are warranted for ninety 90 days from the date of shipment but repairs or replacements to original equipment shall not renew or extend the warranty period o2. lubricate the gun B Lubricate all threaded connections for ease of maintenance C Lubricate the Needle only where it passes through the needle packings D DO NOT allow lubricant to get into the Fluid Tube Nozzle Air Cap or interior of the paint chamber areas where paint may come in contact with lubricant DO NOT OPERATE SPRAY GUNS WITHOUT PERSONAL SAFETY EQUI PMENT Ain erter SharpShooter HVLP Paint Spray System SharpShooter Illustrated Parts Breakdown ver CT 19 DO NOT OPERATE SPRAY GUNS WITHOUT PERSONAL SAFETY EQUI PMENT Ain erter SharpShooter HVLP Paint Spray System SharpShooter SS 100 Parts List Pat NSN Description Trigger Assembly Fluid Control Assembly Air Control Assembly CT 07 4940 01 439 9935 Pattern Control Assembly CT 13 4940 01 439 8999 Brush 4940 01 439 sem Inge seng Mem 5500 Cmmmmecqe SSS L i NK E SS 004 Barb Fitting 1 4 Hose 34 NPT SS 005 Barb Fitting 3 8 Tube 34 NPT DO NOT OPERATE SPRAY GUNS WITHOUT PERSONAL SAFETY EQUI PMENT AirVerter Stencil Pro HVLP Paint Spray System SharpShooter Troubleshooting Guide Probable Cause Blockage in fluid nozzle Clean or replace strain paint Paint Will Not Loose fluid nozzle Tighten Flow Coating is too thick Thin the coating Loose needle packing Ad
3. f such equipment Equipment and parts furnished by Smith Eastern but manufactured by others shall be limited to the warranty offered by the manufacturer thereof Smith Eastern reserves the right to limit this warranty in cases of misuse or abuse Any modifications to spray guns or recommended procedures will void the warranty The foregoing warranty is exclusive and in lieu of other warranties of quality or performance expressed implied or statutory including any warranties of merchantability or of fitness for a particular purpose DO NOT OPERATE SPRAY GUNS WITHOUT PERSONAL SAFETY EQUI PMENT Ain erter SharpShooter HVLP Paint Spray System EQUIPMENT REQUIREMENTS Air Compressor Air compressors used with AirVerter Spray Guns must be able to HOLD a minimum of 40 PSI while spraying Note Position a pressure gauge in the air hose nearest the spray gun to be assured of the PSI required to satisfactorily spray your coating High Pressure Air Hose A Air hose lengths up to 50 feet MUST have an I D of 3 8 including fittings B Air hose lengths greater than 50 feet MUST have an I D of 1 2 including fittings OPERATING INSTRUCTIONS OPERATION Starting A The SharpShooter SS 100 Spray Gun operates with the trigger controlling both the fluid flow and airflow Before Spraying A Follow the Air and Paint Management Guidelines listed on the following page B Before paint is poured into the cup make certain pain
4. just packing Inconsistent Running out of paint Fill cup or pot but never the top 1 4 Spray Pattern 3 Loose needle packing Adjust packing Spits and Sputters Damaged fluid needle Replace Wrong size fluid needle Replace Dirty fluid nozzle Clean Impurities in paint Strain paint Leakage at Loose fluid nozzle Tighten Front of Gun Fluid adjustment screwed all Rotate Fluid Control Knob CT 05 1 the way out on rear of gun clockwise Needle not firmly seated in Check for nozzle obstruction the nozzle Packing too tight Loosen and adjust to correct tension Dirty or damaged air cap Clean or replace Dirty or damaged fluid nozzle Clean or replace or needle Fluid nozzle partially clogged Clean Fluid nozzle not centered with Replace air cap air cap Air cap not seated correctly Re seat air cap Distorted Spray Pattern DO NOT OPERATE SPRAY GUNS WITHOUT PERSONAL SAFETY EQUI PMENT Ain erter SharpShooter HVLP Paint Spray System CT 11 High Wear Kit For Stencil Pro and SharpShooter Spray Guns NSN 4940 01 439 7966 Patt wen Description en Cro rem Contr een posa CE Cr eamed Rubber CEN ees weer ro eres tmm CU DO NOT OPERATE SPRAY GUNS WITHOUT PERSONAL SAFETY EQUI PMENT AirVerter Stencil Pro HVLP Paint Spray System DO NOT OPERATE SPRAY GUNS WITHOUT PERSONAL SAFETY EQUI PMENT
5. nob CT 05 1 at the rear of the spray gun controls trigger action Turning the knob to the right reduces the fluid flow turning it to the left increases the flow If you are having problems with the operation of your paint gun check the Trouble Shooting Guide at the end of the manual for possible causes and solutions DO NOT OPERATE SPRAY GUNS WITHOUT PERSONAL SAFETY EQUI PMENT Ain erter SharpShooter HVLP Paint Spray System Air and Paint Management Guidelines Approximate PSI Application Thin Coatings Machines and implements small parts plant maintenance ZAHN Z2 Test 16 to 22 seconds controlled production work work in enclosed areas with Minimum 40 PSI compressor pressure Door ventilation priming WARNING Gun must be de pressurized prior to any maintenance or disassembly procedure Disconnect air hose prior to performing any maintenance operation Cleaning the SharpShooter Spray C Clean nozzle with brush Never place the Gun whole gun in solvent D Clogged holes should never be cleaned with hard objects as the smallest amount of damage may badly influence the spray pattern Packing must be slightly lubricated after cleaning of gun Cleaning and Gun Care A Remove the Air Cap and Ring and clean with solvent E B Flush gun thoroughly with solvent Spray Gun Performance Is Directly Related To How Well The Gun Is Cleaned After Use Lubricate A Use Vaseline or a non silicone grease to
6. t is properly mixed This is particularly true when mixing multi component paints Use a paint shaker rotary mixer or paint paddle to achieve a homogeneous mixture Hint Split your paint into two parts the top will be lighter and the bottom will be heavier Completely stir the bottom half of the paint and slowly add small amounts of the top half into the heavier bottom C Strain your paint to remove impurities Use a cone strainer or a 100 mesh nylon bag or equivalent strainer D Thin your paint according to the manufacturer s specifications E Ensure needle packings are properly adjusted Needle packings are preset at the factory to proper tension However use and cleaning may alter this setting To adjust needle packings to proper tension 1 With gun disconnected from air and fluid sources pull trigger to move the needle out of the nozzle 2 Adjust packing nut until needle is held in the open position by tension from the needle packings 3 Loosen packing nut approximately 1 4 turn or until needle returns to closed position Spraying A A siphon action draws paint from the paint B 1 container into the fluid chamber of the gun and out through the nozzle where the flow of atomizing air breaks the paint stream into tiny particles creating the spray Needle position controls the amount of paint flowing through the fluid nozzle 2 Trigger action controls needle position 3 The Fluid Control K
Download Pdf Manuals
Related Search