HDMI Splitter 1 input 8 outputs
Contents
1. Sa S eee INPUT OUTPUT2 OUTPUT1 DC5V Power Adaptor Out 2 Out 1 a i z 3D HDTV Display 3D HDTV Display X If you want to distribute 3D source to both of the displays please make sure all of the sink devices support the same HDMI 3D video format as the source The 3D image cannot be delivered to TVs which do not support 3D video format CONNECTION AND OPERATION Connect the 33 12505 Splitter to your devices 1 Connect the HDMI cable from the HD source to the input port of 33 12505 Splitter 2 Connect the HDMI cables from your displays monitor or projector to the outputs of the 33 12505 Splitter Standard resolution of outputs set up Please set the output resolution of the source device first and make sure the resolution can be displayed on all connected display devices For example if you set the output resolution of the source device to 1080p please make sure all the display devices can display 1080p resolution If any connected display device can not support 1080p resolution the display device will show no pictures Plug the 5V DC power supply into the 33 12505 Splitter When connections are completed the HD signal will be distributed to each HDTV display 2 6 For the best performance you should re start the 33 12505 splitter power to make sure the 33 12505 is working well in HDCP between HD player and Display devices when the HDMI cable was disconnected after your us2. Splitter Stellar abs 1 input 2 output Model 33 12505 oS BP INTRODUCTION Thank you for your purchase of the Stellar Labs Model 33 12505 HDMI Splitter This splitter is designed to simplify the use of multiple high definition A V devices in a home theater system The 33 12505 allows one HD source device to support up to two HDTV displays providing both displays the same image quality as the source As this supports HDMI 3D video format it is compatible with all equipment currently manufactured The amplifier and equalizer functions offer solutions for Home Theater AV installation data center information distribution conference room presentation school and corporate training environment FEATURES AND CONTENTS For the best performance of this splitter box please read this manual carefully and keep it for further information Features HDMI 3D video format support Supports 1080p HDTV Pixel Clock Rate 25 225 MHz Supports HDCP compliant devices Compliant with DTS HD Dolby TrueHD lossless compressed digital audio Gold plated connectors Maintains the same image quality as source up to 1080p Amplifier and Equalizer functions enable longer HDMI cable Expand 2 HDMI outputs of your high definition source Rugged stylish metal housing design Package Contents DC 5V power adaptor 33 12505 Splitter main unit User s manual TYPICAL APPLICATIONS 3D Blue ray DVD player
3. at please turn off the 3D play mode of 3D Blue ray player NOTICE Manufacturer reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries 33 12505 incorporates HDMI technology Trademarks and brand names are the properties of their respective owners Dolby is a registered trademark of Dolby Laboratories DTS is a registered trademark amp the DTS logos and Symbol are trademarks of DTS Inc WARRANTY This Stellar Labs device is warranted by MCM Electronics against defects for a period of 365 days from the date of purchase This warranty includes manufacture defects and failure due to normal use and operation Failure due to misuse excessive wear or damage improper installation or other external factors is not covered under this warranty MCM Electronics is not responsible for any consequential on inconsequential damage to any other unit or component incorporated with this device There are no other warranties express or implied which extend beyond this unit and there are no warranties of fitness for any particular purpose The warranty does not cover consequential damage due to defective or improper use of products Distributed Exclusively by MCM Electronics 650 Congress Park Drive Center
4. ct connection from the source device to the display device without the Splitter is working Check all the connection is correct and all connectors are connected well Check the quality of connected cable and make sure the cable does not damage Change the connection sequence of display devices Make sure the output resolution setting of source device can be displayed on all connected display devices Reset the Splitter 2 How to reset the standard output resolution Connect all cables and reset the Splitter The supporting resolution of the detected display device will need to match with the output resolution of source And the resolution will 3 become the standard output resolution for all connected display devices The detecting sequence of Splitter is to detect output ports by the order of port number Or disconnect all cables and reset the Splitter and then connect HDMI cable from the display one by one The resolution of the first plug in display will become the standard resolution for all outputs if it matches with the resolution of source 3 How to make sure your input and output devices are suitable with the Splitter Whether all devices are HDCP compliant Whether all HDMI cables stay in good quality as well as connectors Make sure all HD displays support the same resolution 720p 1080i or 1080p 4 When there is only picture displayed and without sound Check all the connection is correct and all connectors con
5. e last time ATTENTION m 33 12505 will distribute one resolution only at one time Please set the output resolution of the source device first and make sure the resolution can be displayed on all connected display devices The resolution mode will depend on the first plug in or first of the sequent display devices that can successfully communicate with the source device Make sure your display devices can support the highest resolution as the source device can support and your display devices are HDCP compliant and fully support HDCP m If the 33 12505 is connected to multiple HDTVs which support different highest resolution 720p 1080i 1080p it is recommend to adjust the output resolution of source device to match the resolution of HDTV that has lower resolution For example the 33 12505 is connected to 2 HDTVs and one of them only supports 720p HD resolution but another can support up to 1080p If you want them to show the same HD content please set the output resolution of source device to 720p m To reset the Splitter please unplug the power adaptor or unplug the power cord from DC jack and then plug it back m HDMI 3D video format Frame packing 1920x1080p 23 98 24Hz 1280x720p 59 94 60Hz 1280x720p 50Hz Side by Side Half 1920x1080i 59 94 60Hz 1920x1080iI 50Hz Top and Bottom 1920x1080p 23 98 24Hz 1280x720p 59 94 60Hz 1280x720p 50Hz TROUBLESHOOTING 1 When there is no picture present please Make sure the dire
6. nect well Check if you connect any DVI interface display device to the splitter the splitter may use the EDID information of the DVI interface display device as communication standard DVI supports only video transmission Please change the connecting sequence and reset the Splitter Make sure the connection is in the HDMI standard Check your cable to see if it supports video transmission only or it is damaged HDCP may not match very well at first connection Please reset your Splitter Do you connect any recorder that does not support HDCP to the output port of Splitter HDCP may lock up audio part 5 When resolution could not show in 1080p Make sure your sources HD Player and displays are fully supporting 1080p 6 When 3D content could not be shown on your display Please make sure your source and displays are 3D supported devices and also support the same 3D format Please check the play mode of Blue ray player has been set to 3D mode or AUTO mode for video output Please make sure the video content is 3D content 7 Ifthe presented picture is not a proper 3D image please check whether the 3D format of 3D Blue ray player and TV projector are correct setting 8 Ifthe presented picture is symmetric which showed with up and down or right and left symmetric image please check whether the TV or projector supports 3D display function and make sure the function is enabled If the TV or projector does not support 3D video form
7. ville Ohio 45459 www mcmelectronics com
Download Pdf Manuals
Related Search