Million Color LED Wheel Well Lighting Kit
Contents
1. OR REBUILT REPLACEMENTS FOR DEFECTIVE PARTS LEDGLOW WILL REFUND THE PURCHASE PRICE FOR SUCH PRODUCT ONLY IF REPAIR OR REPLACEMENT FAILS TO REMEDY THE DEFECT PURCHASER S FAILURE TO MAKE A CLAIM AS PROVIDED IN PARAGRAPH 1 ABOVE OR CONTINUED USE OF THE PRODUCT SHALL CONSTITUTE AN UNQUALIFIED ACCEPTANCE OF SUCH PRODUCT AND A WAIVER BY PURCHASER OF ALL CLAIMS THERETO 3 EXCEPTIONS TO LIMITED WARRANTY LEDGLOW SHALL HAVE NO OBLIGATION TO PURCHASER WITH RESPECT TO ANY PRODUCT THAT IS SUBJECTED TO ANY OF THE FOLLOWING ABUSE IMPROPER USE NEGLIGENCE ACCIDENT MODIFICATION FAILURE TO FOLLOW THE OPERATING PROCEDURES OUTLINED IN THE USER S MANUAL FAILURE TO FOLLOW THE MAINTENANCE PROCEDURES IN THE SERVICE MANUAL FOR THE PRODUCT ATTEMPTED REPAIR BY NON QUALIFIED PERSONNEL OPERATION OF THE PRODUCT OUTSIDE OF THE PUBLISHED ENVIRONMENTAL AND ELECTRICAL PARAMETERS OR IF THE PRODUCT S ORIGINAL IDENTIFICATION TRADEMARK SERIAL NUMBER MARKINGS HAVE BEEN DEFACED ALTERED OR REMOVED LEDGLOW EXCLUDES FROM WARRANTY COVERAGE PRODUCTS SOLD AS IS AND OR WITH ALL FAULTS LEDGLOW ALSO EXCLUDES FROM WARRANTY COVERAGE ANY CONSUMABLE ITEMS SUCH AS FUSES AND BATTERIES All software and accompanying documentation furnished with or as part of the Product is furnished AS IS Le without any warranty of any kind except where expressly provided otherwise in any documentation or license agreement furnished with the Product 4 PROOF OF PURCHASE REGISTRATIO2. You can program up to 3 wireless remotes to one control box 2 In order to program the remote to the control box you must turn the kit off a First Remote Press and hold the mode button on the wireless remote and the mode button on the control box for 5 7 seconds Test the operation with the remote b Second Remote Press and hold the mode button on the wireless remote and the mode button on the control box for 5 7 seconds Test the operation with the remote c Third Remote Press and hold the mode button on the wireless remote and the mode button on the control box for 5 7 seconds Test the operation with the remote For accessories replacement parts and or technical support please visit www LEDGlow com for more information INSTALLATION INSTRUCTIONS L DpDGLlow Tech Support A Tec SupOrTOLEDGIOW COM ONE YEAR NON TRANSFERRABLE LIMITED WARRANTY AND DISCLAIMER LEDGlow Lighting LLC LEDGlow warrants to the original retail consumer purchaser and not any other purchaser or subsequent owner that this Product will be free from defects in material or workmanship for a period of one 1 year from the purchase date This warranty does not cover any Product that is 1 installed incorrectly or 2 damaged by collisions vandalism other accidents or similar causes For a period of one 1 year from the date of purchase at no charge to the Purchaser LEDGlow will repair or replace this Product if it is determined by LEDGlow to be
3. defective After the warranty period the Purchaser must pay all charges for parts and labor Coverage under this warranty is only valid within the United States including its territories as well as in certain other countries Purchasers should check our website www LEDGlow com to determine the warranty coverage in the countries in which they are located LEDGlow does not warrant the installation of the Product which is the sole responsibility of the Purchaser Installation should be done by licensed professionals Improper installation may lo the Product and any vehicle in which it is installed and may cause burns and electrical injury to individuals LEDGlow s warranty does not cover any expenses incurred in removing Products that are defective or re installing replacement Products in their place During the warranty period to have the Product repaired or replaced the Purchaser must return the Product freight prepaid by the Purchaser to LEDGlow but for customers in the contiguous United States LEDGlow will pay the shipping charges if any Product fails during the first thirty 30 days after purchase The Product must be returned in its original carton or in a similar package affording an equal degree of protection LEDGlow will return the repaired or replaced Product freight prepaid to the Purchaser LEDGlow does not provide Purchasers with temporary replacement units during the warranty period or at any other time ls the P
4. necessary Remove the vehicle s wheels if necessary Start with the driver s side tube and mount it with plenty of clearance from any heat sources suspension and moving parts The flexible tube can be contoured and mounted on top of the wheel or behind the strut with the included self tapping screws 4 Repeat Step 3 for the remaining 3 tubes It is extremely important to ensure that the tubes do not come in contact with any heat sources suspension and or moving parts 5 If you removed the vehicle s wheels you can now reinstall them in accordance to factory specifications 6 After the tubes have been mounted and the wheels have been reinstalled back in place turn the steering wheel all the way to the right and left several times to ensure the tubes do not come into any contact with the wheels or any moving parts If there is clearance between the tube and wheels you may resume the installation 7 Find a safe secure and dry location to mount the control box The control box was not designed to withstand water or the elements We recommend mounting the control box inside of the vehicle and running the distributor cable through the firewall If this is not possible you can mount the control box in the engine compartment in the driest location available Water damage and or corrosion to the control box will void all warranties wr INSTALLATION INSTRUCTIONS LEDGLOW stem TechSupport LEDGlow com 8 Connect the red power wire
5. INSTALLATION INSTRUCTIONS L DGLOW Taca Samian oo N TechSusertOlenGiow com Million Color LED Wheel Well Lighting Kit Warning Please check your state and local laws before installing this Million Color LED Wheel Well Kit Every state has different policies and procedures in place regarding aftermarket vehicle accessories LEDGlow is not responsible for any fines that you may receive while using this lighting kit This kit is for off road use only Warning The installation of this kit is recommended to be installed by a licensed professional The improper installation of this kit will void all warranties The Control Box and Junction Cable that are used to power the wheel well tubes must be installed in a dry location Having these parts exposed to water or the elements will cause the kit s controller to fail Any water damage or corrosion to this part will VOID all warranties PLEASE READ THE FOLLOWING INSTRUCTIONS THOROUGHLY BEFORE INSTALLING AND OPERATING THIS LED WHEEL WELL LIGHTING KIT Wheel Well Lighting Kit Includes 4 24 Inch Flexible Tubes 30 Self Tapping Screws e 1 Control Box e 20 Zip Ties e 1 Junction Cable Wheel Well Lighting Kit Installation 1 Arrange the tubes out on the ground and test the kit to ensure proper functionality before installing Please refer to the schematic below for proper placement of the tubes control box and junction cable Optional Raise and support the vehicle if
6. N The Purchaser s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility Registration of any Product or of this limited warranty is Voluntary and failure to register will not diminish any rights available under this warranty DISCLAIMER OF WARRANTY EXCEPT FOR THE FOREGOING WARRANTIES LEDGLOW HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2 312 3 OF THE UNIFORM COMMERCIAL CODE OR IN ANY OTHER STATE STATUTE LIMITATION OF LIABILITY THE LIABILITY OF LEDGLOW IF ANY AND PURCHASER S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND WHATSOEVER REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT SHALL NOT BE GREATER THAN THE ACTUAL PURCHASE PRICE OF THE PRODUCT FOR WHICH SUCH CLAIM IS MADE IN NO EVENT SHALL LEDGLOW BE LIABLE TO PURCHASER FOR ANY SPECIAL INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING BUT NOT LIMITED TO COMPENSATION REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER GOVERNING LAW This non sd warranty shall be governed by the law of the State of New Jersey U S A and the United States of America excluding their conflicts of laws principl
7. es The courts of Camden County New Jersey shall have the exclusive jurisdiction over any legal action with respect to this warranty sferrable limi This limited warranty gives specific legal rights You may also have other rights that may vary from state to state or from country to country Some states or countries do not allow the exclusion or limitation of incidental or consequential damages so the above limitations and exclusions may not apply to you You are advised to consult applicable state or country laws for a full determination of rights
8. h the rear wheel well tubes run the wires to the location of the junction cable Make sure to secure the wires to any suspension parts by using the included zip ties Leave at least 10 inches between the exhaust and the wires 12 Lower the vehicle if it was raised and test your new kit Using the Control Box amp 4 Button Wireless Remote Color Change Button Pressing this button onthe control box or wireless remote allows you 1o selest from 18 solid Speed Change Button Pressing this butt om the control box or color options and 2 color eyele modes The 18 available solid colors options are listed below wireless remote will allow you to selest rom different speods for your selected patien Blue 7 Purple re un Lime Green Teal your kits Light Purple Lavender White Million Color Sean sic mode this button will Light Pink adjust the sensitivity of the selected musie Million Color Fade mode Mode Change Button Power Button This button is used to power your kit on and This button is used to select from the 17 different ighting patiems Scan to Solid On3 5 Sound Activated Modes 1 3 Solid 10 2 3 Scan Side to Side Sean End to End Sean Chase Mode Into Out Sean id Dlarnination Adding or Replacing your Wireless Remote 1 Your kit is already pre programmed for the included wireless remote This setup is only needed when replacing an existing remote or by adding additional wireless remotes to your system
9. roduct or transfers the vehicle on This limited warranty is non transferrable and will automatically terminate if the original retail consumer purchaser res which the Product is installed An original retail consumer purchaser is a person who originally purchases the Product or a gift recipient of a new Product that is in its original packaging and unopened This limited warranty is subject to all of the following terms and conditions TERMS AND CONDITIONS 1 NOTIFICATION OF CLAIMS WARRANTY SERVICE IF PURCHASER BELIEVES THAT A PRODUCT IS DEFECTIVE IN MATERIAL OR WORKMANSHIP WRITTEN NOTICE WITH AN EXPLANATION OF THE CLAIM SHALL BE GIVEN PROMPTLY BY PURCHASER TO LEDGLOW ALL WARRANTY CLAIMS MUST BE MADE WITHIN THE WARRANTY PERIOD AND ANY PRODUCTS RETURNED TO LEDGLOW MUST BE SHIPPED IN ACCORDANCE WITH LEDGLOW S PROCEDURES INCLUDING USE OF RMA NUMBERS SUPPLIED BY LEDGLOW AFTER NOTIFICATION THE REPAIR OR REPLACEMENT OF ANY PRODUCT OR PART THEREOF SHALL NOT EXTEND THE ORIGINAL WARRANTY PERIOD THE SPECIFIC WARRANTY ON THE REPAIRED PART ONLY SHALL BE IN EFFECT FOR A PERIOD OF NINETY 90 DAYS FOLLOWING THE REPAIR OR REPLACEMENT OF THAT PART OR THE REMAINING PERIOD OF THE PRODUCT WARRANTY WHICHEVER IS GREATER 2 EXCLUSIVE REMEDY ACCEPTANCE PURCHASER S EXCLUSIVE REMEDY AND LEDGLOW S SOLE OBLIGATION IS TO SUPPLY OR PAY FOR ALL LABOR NECESSARY TO REPAIR ANY PRODUCT FOUND TO BE DEFECTIVE WITHIN THE WARRANTY PERIOD AND TO SUPPLY NEW
10. to a positive 12 volt source If you need to extend the red and black wires be sure to use 16 or 18 gauge automotive grade wiring If you are running the wires to your vehicle s battery it must go through the firewall by using an existing grommet or by drilling a hole and adding a new grommet which is available at any auto parts store Be sure to install the fuse within 6 inches of the battery If you connect the power wires to a switched source the control box will not remember the color and or pattern the kit was last on If you connect the power wires to a constant source the control box will remember the color and or pattern the kit was last on Also when connected to a constant source you will need to physically turn the kit off as it will not power down with your vehicle If you want to tap power from your vehicle s fuse box we recommend using LEDGlow s Expandable Circuit which is available at www LEDGlow com 9 Connect the black wire to a good unpainted metal surface under the dash at any main bracket or grounding block If you are connecting the wires to your vehicle s battery connect the black wire to the negative terminal of the battery or any engine ground 10 Next mount the junction cable on the firewall away from heat and in a dry location The junction cable was not designed to withstand the elements Corrosion to the junction cable will void all warranties and may cause the control box to fail 11 Starting wit
Download Pdf Manuals
Related Search