Home

Owner`s Manual Manual del Propietario Manuel

Contents

1. e A USB Memory Stick that requires its own driver or the device with a special system such as fingerprint recognition are not supported e This unit is not allowed to use the USB Memory Stick which requires an external power supply 500mA or more English 8 Useful tips 33 English FAQ Question My remote control does not work What should do Check the antenna or cable connection to the main unit Check the batteries of the remote control Check if there is an obstacle between the infrared sensor window and the remote control Test the signal Output use IR Signal Check m p 35 e Aim the remote control directly at the infrared sensor window on the front of the unit e Reduce the distance to the unit e Re insert the batteries with their polarities as indicated e When there is an infrared equipped device such as PC near this unit it may interrupt the remote control signal of this unit Move Answer f okay then possible infrared sensor trouble he infrared equipped device away from this unit change the angle of the infrared sensor or Turn Off the infrared communication function How come the Initial setup appears every time Turn On this unit Why can not watch some RF signal TV programs e Connect the RF coaxial cable to the unit directly and run the initial setup e Make sure to complete the initial setup before the unit goes into Standby mode e Autoprogram
2. After making all the necessary connections press to Turn On the unit lt may take a few moments to Turn On the unit for the first time e Initial setup menu appears automatically after the unit is Turned On Use A Y to select the on screen language from the choices English Espa ol Fran ais on the right side of the TV screen then press OK Use A Y to select Antenna for TV channels or Cable for CATV channels then press OK Initial setup Make sure the antenna is connected to ANTENNA IN jack Antenna Select your signal source de ANTENNA IN x OK Antenna Wp W Select When Antenna is selected the TV detects antenna signals It searches for DTV and Analog TV channels available in your area When Cable is selected the TV detects signals supplied by cable It searches for DTV Analog TV and Cable channels available in your area BACK MENU OR Skip e Autoprogram will begin Initial setup Please wait while the system is scanning for channels Auto programming may take more than 20 minutes to complete Digital channels Analog channels 113 4 Use A Y to select the desired location setting then press OK Initial setup Location Home is recommended for normal home use In the Retail Store mode all settings are fixed Home Select Retail the unit will be set up with predefined setting for retail displays Select Home the unit is set to maximize the energy e
3. Damage from mishandled shipments or transit accidents when returning product e A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications e A product used for commercial or institutional purposes including but not limited to rental purposes e Product lost in shipment and no signature verification receipt can be provided e Failure to operate per Owner s Manual TO OBTAIN ASSISTANCE Contact the Customer Care Center at 1 866 341 3738 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON SUMER WITH THE ISSUING COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MER CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusions or limitation of inciden tal or consequential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights You may have other rights which vary from state province to state province FUNAI CORPORATION Inc 19900 Van Ness Avenue
4. e Ensure that no buttons on the remote control are depressed and move freely Continued on next page 34 English Symptom Remedy Power is ON but no screen e Check whether the connection of the antenna cable receiver or satellite box is connected correctly ag Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu ray disc DVD recorder ake sure that the selected Input mode is connected to the working Input jack M Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode Tap any key on the keyboard to wake up your computer Cc e No picture or sound Check if the Power is on heck whether all the cables to the unit are connected to the correct Output jack of your device like Blu ray DVD recorder e View other TV channels The problem might be limited to the broadcasting station or weak signal strength nplug the AC power cord and wait for about 1 minute then plug the AC power cord and Turn On the unit again heck whether the connection of the antenna cable receiver or satellite box is connected correctly ake sure that the selected Input mode is connected to the working Input jack h eck if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode Tap any key on the keyboard to e up your computer al ake sure that the sound is not muted Press DK so that the volume bar and current volume level will a
5. 5 Use more of your TV This section describes the overview of the main menu displayed when you press MENU The main menu consists of the function setting items below Displaying the main menu Press MENU to display the main menu 2 Use A Y to select the desired menu and an item then press OK or use A V lt P to determine the setting Adjusting the picture mode or customize the picture quality as your preference Adjusting the sound mode equalizer and some other sound functions BACK MENU Picture Auto picture o Personal Backlight 0000 Setup m p 20 Contrast Brightness Scanning the channels available in your area and see what the antenna levels are Color Tint Sa a Sehr eatures Advanced settings Il p 22 Adjusting the Closed Caption parental guide and some other useful functions You can choose English Spanish or French as your on screen language p You can view picture JPEG and video Motion JPEG files stored on a USB Memory Stick 3 When the setting is completed press MENU or BACK to exit 19 English You can set a particular about picture quality in Advanced settings Picture Picture Color alignment Normal Before you begin Noise reduction You must set Home in Location m p 27 Dynamic backlight Black stretch Otherwise personalized picture and sound settings will not be memorized after the unit goes into Standby mode Dynamic contrast Press MENU an
6. S Sex TEAS V Violence L Language TV MA S Sex V Violence menu You cannot block a sub ra lor baie a the category to X ing if or Blocked sub rating will appear beside the main rating category in US TV ratings lock he main rating is set to automatically changes al its sub ratings to the same English Canadian English or Canadian French ratings You can select the rating for Canadian English or Canadian French broadcasting 3 Use A Y to select Canadian English rating or Canadian French rating then press OK 4 Use A to select the desired rating then press OK repeatedly to switch between view and block BJ indicates that the rating is locked LJindicates that the rating is not locked E nee Conatan Description nglish rating French rating All Locked all ratings E Exempt program C For all children C8 E For children over 8 G General audience 8ans Unsuitable for ages under 8 PG Parental guidance suggested 13ans Unsuitable for ages under 13 14 Unsuitable for ages under 14 16ans Unsuitable for ages under 16 18 18ans Adult audience only TheV Chip can block non rated programs as per CEA 608 E sec L 3 If the option to block NR None or E programs is used in US movie ratings lock US TV ratings lock Canadian English rating or Canadian French
7. antenna condition Features Press MENU and use V to select Features then press OK Caption settings Child lock PC settings Features fun Link HDMI CEC Location Software upgrade 2 Adjust the following items Caption settings Closed Captioning displays the audio portion of programming as text superimposed over the video 1 Use A Y to select Caption settings then press OK Caption service Digital caption service Caption style Features 2 Use Y 4 to select the item you want to adjust then press OK n addition to the basic Closed Caption DTV has its own Closed Caption called Digital caption service Use this menu to change the settings for Digital caption service off Selects if you do not want Digital caption service Digital caption service Selects one of these before changing CS 1 to any other item in Caption settings CS 6 menu Choose CS 1 under normal circumstances 22 Off Select if you do not want caption service CC 1 The primary caption and text services The d captioning or text is displayed in the same 4 language as the program s dialog up to 4 lines of script on the TV screen Rarely available and broadcasters use them CC 3 only in special conditions such as when CC 1 and and CC 3 or T 1 and T 3 are not available T3 e There are 3 display modes according to Caption serv
8. In which case Features Canadian English rating you will need to use the menu options on the external set top box to control Closed 2 2 Captioning Canadian French rating The captions do not always use correct spelling and grammar ey rer ar Not all TV programs and product commercials include Closed Caption information Region ratings lock Refer to your area TV program listings for the TV channels and times of Closed Caption ee oe shows The captioned programs are usually noted in the TV listings with service marks Clear r SJON i atings lock ee Change PIN Not all captioning services are used by a TV channel during the transmission of a Closed Caption program osed Caption will NOT be displayed when you are using an HDMI connection To show the Closed Caption on your TV screen broadcast signal must contain the Closed Caption data Note Not all TV programs and commercials have the Closed Caption or all types of the Q Closed Caption e When you select a rating and set it to X or the higher ratings will be blocked e Captions and texts may not exactly match the TV voice automatically The lower ratings will be available for viewing Changing channels may delay the Closed Caption for a few seconds e When you set the highest rating to 1 all ratings turn to 1 automatically e Adjusting or muting the volume may delay the Closed Caption for a few seconds To block an
9. M E i 0 PREV CH PREV CH CA MENU INFO e The above image is an example for 50 inch screen size TVs It may differ depending on what product you purchased To select Channels by using CH A V or CH e Touch CH A up Y down on the front panel or press CH on the remote control To select Channels by using the NUMBER buttons e For Digital channels press a number followed by a dot e and the corresponding sub channel number When selecting Digital channel 11 1 Be sure to press before entering the subchannel number H H When selecting cable or Analog channel 11 53 50 Press PREV CH to return to the previously viewed channel Note To select the non memorized channels use the NUMBER buttons No Signal will appear on the TV screen after the subchannel broadcast is over e Audio only program message will appear on the TV screen when you receive only sound signal Watching channels from an external device Switching Each Input Mode can easily switch with the remote control between TV DTV or Analog TV and external devices when they are connected to the unit 1 TurnOna set top box or the connected device e The picture from your set top box or the connected device might appear automatically on the TV screen If the picture does not appear Re SOURCE Press SOURCE repeatedly to select the set top box or the connected device and wait a
10. Model Quantity Size Cable management tie 50MF412B 8 M4 x 12 39MF412B 3 M4 x 20 AC power cord 50 inch TVs only A Ifyou lose the screws please purchase the above mentioned Phillips head screws at your local store Ifyou need to replace these accessories please refer to the part name or No with the illustrations and call our toll free customer support line found on the cover of this Owner s Manual When using a universal remote control to operate this unit e Make sure the component code on your universal remote control is set to our brand Refer to the instruction book accompanying your remote control for more details We do not guarantee 100 interoperability with all universal remote controls Symbols used in this Owner s Manual The following is the description for the symbols used in this Owner s Manual Description refers to Digital TV operation e f neither symbol appears the operation is applicable to both Stand assembly 50 inch TVs only Attaching the base You must attach the base to the unit to have it as a table top unit Be sure the front and rear of the base match the proper direction For large screen TVs at least 2 people are required for these steps 50 inch TVs 1 8 39 inch TVs 1 e Make sure to use a table which can support the weight of this unit and is larger than this unit e Make sure the table is in a stable location e Whe
11. Torrance CA 90501 MAGNAVOX FUNAI CORPORATION Inc 19900 Van Ness Avenue Torrance CA 90501 A21U0UD A21UBUH A21TOUH tok hk
12. accepts 480i 480p 720p and 1080i of video signals for this connection Composite Analog Video Connection Composite Analog Video connection offers standard picture quality for video devices connected to the unit If you connect to the unit s Composite Video Y VIDEO Input jack connect audio cables to the Audio L R Input jacks When the Audio is monaural then only connect to the Audio L Input jack DVD player So q IN Audio L R Video cables Note e With this unit yellow cable must be connected to Y green of Component Video Input jacks e Whenever you connect to the Composite Video Input jack Y VIDEO you must disconnect the Component Video Input jacks Pb and Pr If you leave those jacks connected it may cause of unstable picture Only the left loudspeaker reproduces sound for mono equipment Use a mono to stereo adapter not supplied for sound reproduction via all internal loudspeakers 31 English Digital Audio Output Connection If you connect this unit to an external Digital Audio device you can enjoy multi channel audio like 5 1ch Digital broadcasting sound Use a Digital Audio coaxial cable to connect the unit to external Digital Audio devices oi a IN dge c ZN i Digital Audio coaxial cable Ome ex Digital home theater amplifier PC connection HDMI connection This unit can be connected to you
13. and vertical Zoom ratio Horizontally stretched picture Wide This crops out the left and right sides of the picture For 4 3 video signal gt Normal Movie expand Full can also be selected after Wide if an HDMI device is selected This picture format similarly displays like 16 9 Full HDMI device only Wide t Q 3 Original size Normal Sidebars appear on both edges of the screen 16 9 Stretched horizontally to fill the screen Stretched more vertically at the top of the screen Movie expand This crops out the top of the picture Maximum size that is more vertically stretched to fill the Zoom screen This crops out the top and bottom of the picture Wide Original size and the edges stretched horizontally to fill the screen For PC Input signal D D t Normal Full Unsealed e This unit can also be connected to your PC that has a DVI terminal Use an HDMI DVI conversion cable for this Video connection and it requires Stereo mini 3 5mm plug Audio cable for Analog Audio signal as well Refer to 16 9 video signal on this page if PC has HDMI Output N Proportionately stretched picture orina Sidebars appear on both edges of the screen Full Stretched out of proportion to fill the screen Unscaled Original size English TV screen information You can display the currently selected channel or other information such
14. as the aspect ratio on the TV screen In the Digital mode the detailed broadcasting information for the current off the air channel such as program title and program guides are displayed Press INFO Digital TV operation A Day of Memories A quarter century ago which may now qualify as the good old days of newspapering r f paper sales a ted for 80 f the i s advertisi Q program title program guide The program guide added to broadcasting information is displayed to a maximum of 4 lines G broadcast station channel number Switching channels m p 14 6 audio language DTV audio mode Analog TV Switching audio mode m p 15 6 program s image aspect ratio Changing picture format m p 16 T CC not available if Closed Caption is set to Off Caption settings m p 22 child lock rating Child and ratings lock im p 23 2 Press INFO to hide the information e When the program guide consists of more than 4 lines use W to scroll to the next previous lines e No description provided is displayed when the program guide is not provided e While the program guide is displayed the Closed Caption function is interrupted e In external Input mode the following screen is displayed e g When an external device is connected to Video Input jack Video Li KE 1v Pc pisv The information display will automatically disappear in 5 seconds 17 English 18 English
15. display image does not e Ifyou are using the unit as a PC monitor make sure that Horizontal position and Vertical position in PC settings are set correctly cover the entire screen If you are watching TV or using the Composite Video Component Video or HDMI with 480i Input press FORMAT repeatedly to switch various screen modes Captions are displayed as a white Interference from buildings or weather conditions may cause captioning to be incomplete if watching Analog TV signals box No caption is displayed in x the Closed Caption supported program Black box is displayed on theTV The text mode is Selected For caption select CC 1 CC 2 CC 3 CC 4 or Off screen Broadcasting station may shorten the program to insert advertisements The Closed Caption decoder cannot read the information of the shortened program Note The LCD screen is manufactured to provide many years of useful life Occasionally a few non active pixels may appear as a fixed point of blue green or red This is not to be considered a defect in the LCD screen Some functions are not available in specific modes but this is not a malfunction Read the description in this Owner s Manual for more details on correct operations 9 Information Glossary Analog TV NTSC Acronym that stands for National Television Systems Committee and the name of Analog broadcasting standards Off the air Analog TV signals are no lo
16. memorizing are completed the lowest memorized channel will be displayed Autoprogram Please wait while the system is scanning for channels Auto programming may take more than 20 minutes to complete cao Oe Digital channels Was Analog channels 6 ch e After setting Autoprogram using CH skips unavailable programs automatically e Ifyou are not receiving a signal from your cable service contact the Cable provider e Ifyou press or MENU during autoprogram the setup of TV channels will be canceled e Even if Autoprogram is completed the channel setting will be lost if the AC power cord is unplugged before the unit goes into Standby mode by pressing 5 The PIN Code will be required once you set a PIN code in the Child and ratings lock m p 23 e Ifyou want to change your PIN code follow the instruction of Change PIN u p 25 Channel list The channels selected here can be skipped when selecting the channels using CH Those channels can still be selected with the NUMBER buttons 1 Use A Y to select Channel list then press OK 2 Use A Y to select the channel you want to remove then press OK Highlight channels for Ch Up Down key selection N BACK w Ch Select ex Watch Skip Back e The channel display for the removed channel darkens You will not be able to select the channel again using CH e To reactivate a removed channel use W and press OK The registered c
17. must be completed when you set up the unit for the first time or move it to a location where previously unavailable channels are broadcast e Make sure Autoprogram has been completed im p 20 e The selected channel may not be broadcasting e When Autoprogram is interrupted and not completed some channels will not be received Make sure to complete the Autoprogram im p 20 e The selected channel cannot be viewed by the Child and ratings lock setting u p 23 e The unit requires some kind of antenna Input An indoor antenna Digital or VHF UHF an external antenna Digital or VHF UHF or an RF coaxial cable from your wall cable satellite box needs to be plugged into the unit How come there is no image from the connected external devices e Check if the correct Input mode is selected by pressing SOURCE or using CH Refer to Watching channels from an external device u p 15 e Check the antenna cable or other Input connection to the unit e When using the Component Video connection check that the Green Y Blue Pb Cb and Red Pr Cr connectors are connected to their corresponding colored jacks on the unit When enter a channel number it changes automatically e Many Digital channels have alternate channel numbers The unit changes the numbers automatically to the ones signifying the broadcasting station channel number These basic numbers used for previous Analog broadcasts e g Input ch 30 automati
18. with dry cloth SO Oh oN Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding ype plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where hey exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or able specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Wall Mount Bracket Kit Brand SANUS Model Screw dimension 50MF412B F55 6 x 0 787 20mm 39MF412B SAN25b 4 x 0 472 12mm The recommended Wall Mount Bracket Kit sold separately allows the mounting of the TV on the wall For detailed information on installing the wall mount refer to the Wall Mount Ins
19. your PC Unplug the AC power cord and use the built in battery of your PC Use an HDMI cable with the HDMI logo a certified HDMI cable High Speed HDMI cable is recommended for the better compatibility e The unit accepts 480i 480p 720p 1080 and 1080p video signals e HDMI DVI connection requires separate audio connections as well and the audio signals are output as Analog L R Audio DVI does not display 480i image which is not in compliance with EIA CEA 861 861B USB Memory Stick This unit offers easy playback of picture JPEG and video Motion JPEG files Insert the USB Memory Stick into the USB terminal shown below USB im p 28 e The unit recognizes only a USB Memory Stick Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit Not supported e A USB Memory Stick is always inserted to this unit directly e A USB Memory Stick is not supplied with this unit e We do not guarantee that all USB Memory Sticks can be supported by this unit Be sure to keep a backup copy of the original files on your device before you play them back on this unit We have no responsibilities for damage or loss of your stored data To protect your USB Memory Stick files from being erased place the write protect sliding tab in the protect position e When you are ready to remove a USB Memory Stick set the unit to go into Standby mode to avoid any damage to your data and the unit
20. 080i 1080p 24 30 60Hz of video signals 32kHz HDMI Component Y Pb Pr Video cables combine red green blue 1 441kHz and 48kHz of audio signals video cables with red white audio UR cables Match the cable colors e This unit accepts 5 1 channel audio signal Dolby Digital and 2 channel audio signal when you connect to the TV LPCM e This unit accepts only signals in compliance with EIA861 S OO SSEEELELELEc For HDMI DVI connection Composite Basic quality The unit accepts 480i 480p 720p 1080i and 1080p video signals e HDMI DVI connection requires separate audio connections as well and the audio signals are output as Analog L R Audio DVI does not display 480i image which is not in compliance with EIA CEA 861 861B For analog connections Composite Video Audio Analog cable usually combine a yellow video cable with red white audio L R cables With this unit yellow cable must be connected to Y green of Component Video Input jacks Component Analog Video Connection Component Analog Video connection offers better picture quality for video devices connected to the unit If you connect to the unit s Component Video Y Pb Pr Input jacks connect Analog Audio cables to the Analog Audio L R Input jacks a top b Audio L R cables set top DOX N or ce Le O T EN n Blu ray disc DVD recorder Component Y Pb Pr Video cables Note e The unit
21. 50MF412B 39MF412B Thank you for choosing Magnavox Need help fast Read your Owner s Manual first for quick tips that make using your Magnavox product more enjoyable If you have read your instructions and still need assistance you may access our online help at www magnavox com support or call 1 866 341 3738 while with your product and Model Serial number Gracias por escoger Magnavox Necesita ayuda inmediata Lea primero el Manual del Propietario en donde encontrard consejos que le ayudar n a disfrutar plenamente de su producto Magnavox Si despu s de leerlo a n necesita ayuda consulte nuestro servicio de asistencia en linea en www magnavox com support o llame al tel fono 1 866 341 3738 y tenga a mano el producto y n mero de model serial Magnavox vous remerc votre confiance Besoin d une a rapide Manuel du Propri taire regorgent d astuces destin es simplifier l utilisation de votre produit Magnavox Toutefois si vous ne parvenez pas r soudre votre probl me vous pouvez acc der notre aide en ligne l adresse www magnavox com support ou formez le 1 866 341 3738 Veillez avoir votre produit port e de main et model serial nombre Contents 1 Notice 5 2 Important 6 Positioning the TV 6 Regulatory notices 6 Environmental care 6 3 Get started 7 Features 7 Supplied accessories 7 Symbols used in this Own
22. Refresh Q Back Setting your location to home You can set the location of your TV to Home or Retail Choosing Home gives you full flexibility to change predefined settings for picture and sound Caption settings Child lock PC settings Features fun Link HDMI CEC Location Software upgrade 2 Use A Y to select Home or Retail then press OK The unit will be set up with predefined settings for retail Retail displays In this setting you can set the backlight brighter The unit is set to maximize the energy efficiency for home Home setting and it can be adjusted through a choice of picture and sound quality according to your preference You must set Home Otherwise personalized picture and sound settings will not be memorized after the unit goes into Standby mode E sticker When you set Location to Retail store E sticker Electronic Sticker is displayed E sticker can be Turned Off using procedure below 1 Use A Y to select E sticker then press OK 2 Use A Y to select Off then press OK Off You can Turn Off E sticker Top E sticker is displayed on top of the TV screen Bottom E sticker is displayed on bottom of the TV screen e Ifyou select Home E sticker will not be displayed 27 English Language Press MENU and use A Y to select Language then press OK Select your menu language English Seleccione el idioma para el menu S le
23. atible with the fun Link function You can set your device to Turn Off by interlocking from this unit s power Of Your connected fun Link device stays on even if the unit goes into Standby mode Auto device off Your connected fun Link device Turns On Off automatically when the unit goes into Standby mode This unit will Turn On when the Power On signal is sent from your connected fun Link device This unit stays in Standby mode even if Off you Turn On your connected fun Link device This unit Turns on automatically when On you Turn On your connected fun Link device Auto TV on You can operate some functions such as disc playback or call up the menu of the connected devices by using this unit s remote control Off Disables the device control PLAY STOP i FWDPP REV lt SKIP gt P SKIPKO lt PAUSE BI LINK Device control AY lt P OK BACK On the NUMBER buttons RED GREEN BLUE YELLOW can be used to control your connected fun Link devices by this unit s remote control 26 English Device list This function lets you see the product model number or name of connected devices Use A Y to select the desired fun Link devices listed on the TV screen then press OK Your connected fun Link device will be Turned On if the device is in Stand by mode HDMI1 DVD recorder HDMI2 Features gt INFO BACK en Input Change
24. ation or weak signal strength e Check if the audio cable is connected into the unit correctly You see a distorted picture or e You may be getting interference from electrical appliances automobiles motorcycles or fluorescent lights hear an unusual sound Try moving the unit to another location to see if this is the cause of the problem Ghosts lines or streaks in picture Electrical interference from nearby appliances may affect picture quality e View other TV channels The problem might be limited to the broadcasting station or weak signal strength You see noise or trash on the e When the capabilities of the unit exceed the capabilities of the Digital broadcasting the signal will be increased to match the screen capabilities of the display of the unit This may cause noise or trash Different color marks on the TV View other TV channels The problem might be limited to the broadcasting station missing data or pixelation screen You switch to a different Input e This unit will memorize the volume level from the last time you adjusted it and the volume changes If the volume of the sound from another device is higher or lower then the loudness will change e Make sure Auto volume leveling is set to On m p 20 You switch to a different Input e This unit will memorize the viewing mode from the last time you used the particular Input modes and the screen size changes The
25. be selected from the remote control Auto Standby If there is no Input signal and no operation for 15 minutes the unit will go into Standby mode automatically Sleep timer You can set the unit to go into Standby mode after a specific amount of time Choices for on screen language Select your on screen language English Spanish or French Stereo sound function PLL frequency synthesized tuning Provides free and easy channel selection and lets you tune directly to any channel using the number and decimal point e buttons on the remote control Various adjustment for picture and sound Customizes image quality suitable for your room and sets your sound preference fun Link via HDMI link fun Link allows your other HDMI link devices to be controlled by the HDMI cable connected to your TV HDMI Input HDMI DVI Input If your video device has DVI Output jack use an HDMI DVI conversion cable to connect the unit Component Video Input PC Input AV Input USB terminal The picture JPEG and video Motion JPEG files stored on a USB Memory Stick can be played back on this unit Digital Audio Output Headphone Audio Output 7 English Supplied accessories Owner s Manual Quick Start guide Registration card l A Quick IMPORTANT Start Remote Control and TV base and screws batteries AAA 1 5V x 2 50 inch TVs _ BE L1 Soe ee ooo 290 39 inch TVs EE Screws packed with this unit
26. cally changes to ch 6 1 Why are captions not displayed entirely Or captions are delayed behind the dialog e Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts Most captioning production companies can display a dialog to maximum of 220 words per minute If a dialog exceeds that rate selective editing is used to insure that the captions remain up to date with the current TV screen dialog How can set the clock There is no clock function on this unit cannot change the Child lock setting because my PIN code no longer works e Ifa Power failure occurs for longer than 10 seconds the child lock setting is retained but the PIN code is reset to the default code 0000 Refer to Child and ratings lock m p 23 Troubleshooting If the unit does not perform properly when operated as instructed in this Owner s Manual check the following chart and all connections once before calling for service Symptom Remedy No power e Make sure the AC power cord is plugged in e Make sure that the AC outlet supplies the proper voltage plug another electrical appliance into the AC outlet to ensure that the AC outlet operates normally e Ifa power failure occurs unplug the AC power cord for 1 minute to allow the unit to reset itself Control buttons do not work Press only one button at a time Do NOT press more than one button at the same time
27. cket on a sturdy vertical wall f installed onto a ceiling or slanted wall the TV and Wall Mount Bracket may fall which could result in a severe injury Do not use screws that are longer or shorter than their specified ength If screws too long are used this may cause mechanical or electrical damage inside the TV set If screws too short are used his may cause the TV set to fall Do not fasten the screws by excessive force This may damage he product or cause the product to fall leading to an injury For safety reasons use 2 people to mount the TV onto a Wall ounting Bracket Do not mount the TV onto the Wall Mounting Bracket while your TV is plugged in or Turned On It may result in an electrical shock injury When installing the unit on the wall allow this much space Top 11 8 inches 30cm 5 9 inches 15cm Bottom 3 9 inches 10cm Left and right side 1 Notice AGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric Co Ltd and Funai Corporation Inc under license from Philips Electronics North America Funai reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this Owner s Manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and sui
28. ctionnez la langue du menu 2 Use A Y to select English Espa ol or Fran ais then press OK Note e Ifyou need the English menu instead of the Spanish or French menu s press MENU Use A Y to select Idioma or Langue then press OK Use A Y to select English then press OK Press MENU to exit the main menu USB Your TV is fitted with a USB connection that enables you to view photos or watch Motion JPEG files stored on a USB Memory Stick Connect the USB Memory Stick to the USB terminal on the side of your TV 2 Press MENU and use A to select USB then press OK e The highlighted text will move to the name of your USB Memory Stick then press OK again Your USB This menu allows you to enjoy your pictures and videos via your USB device 3 Use A Y to select the Picture or Video then press OK e The files recorded under the following specifications are required Picture JPEG Upper limit 24Mpixel Size 320x240 QVGA Video Frame rate 30fps Sampling frequency Motion JPEG Audio type LPCM 32 kHz 44 1 kHz or 48 kHz Note Quantization bit rate 16 bit Up to 2GB FAT16 or 8GB FAT 32 capacity can be supported e Up to 10 000 files or 1 000 folders with 19 hierarchies can be recognized Up to 255 English characters can be recognized e This unit does not support MTP Media Transfer Protocol e This unit supports FAT16 and FAT32 file systems e Ifthe file is not supporte
29. d an error message appears e When the USB Memory Stick is not recognized try reconnecting it again We cannot be held responsible if your USB Memory Stick is not supported nor will we accept any liability for damage or loss of stored data A file name exceeding 128 characters or contains a dot character is not supported on this TV e Progressive JPEG files are not supported Only a Motion JPEG file with an avi extension is supported An extension mov is not supported e During Motion JPEG playback Pause Forward and Reverse do not work on this unit 28 English Picture JPEG 1 Use A Y to select the desired file then press OK Your USB Picture Picture Picture Image1 jpg Image1 jpg Image jpg 1200 900 2009 04 02 17 42 06 Thumbnails 3 Press OK key to play pause e To toggle between List and Thumbnails press the NUMBER 2 button each time e The unit goes to the Slide show automatically To pause play the Slide show press OK Use the NUMBER buttons 1 through 4 to see the file detail E or change the following settings A Ef See the description on the top of the next column Item Detail Press 1 to display file details below M Detail Name Album Date Size and Next ore Detal Press 1 again to remove file details Press 4 or OK to start the Slide show S h While the Slide show is on th
30. d use A Y to select Picture then press OK SOG ia em E anne Gamma Gamma 2 Picture Auto picture Personal Backlight Contrast rig Brightness o Col to set the color temperature to Personal Color was Cool Normal and Warm iO EE temperature s Tini 0 moda When you adjust the fo lowing settings In Personal will be set automatically Sharpness Cursor lt 4 Cursor Advanced settings Red gain o decrease contrast to increase contrast ga with red with red 2 Use Y lt P to select the item you want to adjust then press Green gain decrease contrast to increase contrast OK c with green with green olor o select the desired setting theri press OK alignment o decrease contrast to increase contrast Personal Standard Vivid Sports Movie Game and Eco Blue gain Auto picture s j With blue With blue When you adjust the following settings Personal will be set automatically f Red offset decrease o increase brightness Cursor lt 4 Cursor gt brightness with red with red o reduce power o set the backlight Backlight consumption brighter Green offset 2 decrease o increase brightness brightness with green with green Contrast o decrease contrast o increase contrast BI ff o decrease o increase brightness Brightness o decrease brightness o incr
31. e following 2 settings will be tart snow displayed Press 2 then use A Y to select the transition mode choosing from Transitions None Dissolve Wipe right Wipe left Wipe up Wipe down Box in and Box out Press 3 then use A Y to change the display time Slide time choosing from Short Medium and Long Press 4 or OK to stop the Slide show While the Slide show is Off the following 2 settings will be Stop show displayed Every press on 2 will turn the picture clockwise by 90 Rotate degrees Press 3 then use A Y to select the zoom factor 1x 2x Zoom or 4x Press OK to set the zoom factor Video Motion JPEG 1 Use A Y to select the desired file then press OK Your USB Video Video Video MOVIE1 avi Title MOVIE1 avi MOVIE1 avi Director Date 2009 04 02 Duration 00 06 37 1 Supported format motion jpeg 320 x 240 30FPS e To stop playback and return to the file list press BACK OK or CH e Press CH to play back from the beginning Item Detail Press 1 to display file details below Title Director Date and Duration More Detail Press 1 again to remove file details 6 Upgrade your TV software Magnavox continuously tries to improve its products and we strongly recommend that you upgrade the TV software when upgrades are available New software can be downloaded from our website at www magnavox com support download_list php using t
32. e valuable benefits listed below so don t miss out Complete and return your Product Registration Card at once or visit at www magnavox com support to ensure Product Safety Notification Additional Benefits By registering your product you ll receive notification Registering your product guarantees that you ll receive directly from the manufacturer in the rare case of a all of the privileges to which you re entitled including product recall or safety defect special money saving offers Know these safety symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of CAUTI ON A uninsulated dangerous voltage within the apparatus s enclosure RISK OF ELECTRIC SHOCK that may be of sufficient magnitude to constitute a risk of electric shock to persons DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT The exclamation point within an equilateral triangle is intended to REMOVE COVER OR BACK NO USER SERVICEABLE PARTS alert the user to the presence of important operating and INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL maintenance servicing instructions in the literature accompanying the apparatus The caution marking is located on the rear or bottom of the cabinet WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Apparatus shall not be exposed to dripping or splashing and no objects
33. ease brightness ue offset brightness with blue with blue Color to SR color o increase color intensity intensity Noise Off o set noise reduction to Off Tint o add red o add green reduction On o reduce noise in an image Sharpness o soften o sharpen D Off o set dynamic backlight to Off ynamic o select the desired setting then press OK backlight On o adjust backlight for best picture quality Advanced settings Color alignment Noise reduction Dynamic backlight based on the incoming video signal Black stretch Dynamic contrast and Gamma 4 Black Off o set black stretch to Off Dynamic backlight will only display for 50 inch TVs 4 8 AE stretch On o enhance black color Dynamic Off o set dynamic contrast to Off contrast On o enhance contrast in an image automatically Gamma 1 Gamma Gamma 2 to change the gamma setting Gamma 3 Sound Before you begin You must set Home in Location m p 27 Otherwise personalized picture and sound settings will not be memorized after the unit goes into Standby mode 1 Press MENU and use Y to select Sound then press OK Auto sound Standard Sound Equalizer SRS TruSurround XT On Auto volume leveling Off TV speakers On Primary MTS Stereo 2 Use A Y 4 to select the item you want to adjust then press OK to select the desired setting then press OK Personal Standard Vivid Sports Movie Music and News When you adjust the following settings Eq
34. emove the batteries if not using the remote control for an extended period of time Remote control 10 English POWER ON STANDBY ON Press to Turn the unit On and go into Standby mode To completely Turn Off the unit you must unplug the AC power cord AUTO MODE Cycles through preset picture and sound settings SAP Digital Mode DTV Press to select the Audio language Analog Mode Analog TV Press to select the Audio mode 0 9 NUMBER buttons Press to select channels e DOT Press to shift the subchannel from the main channel PREV CH Press to return to the previously viewed channel CH Press to select channels VOL Press to adjust the volume ax MUTE Press to turn the sound On and Off BACK Press to return to the previous menu operation OK Press to decide the command of setting when the main menu is displayed AY lt P NAVIGATION buttons Press to move left right up down through the items SOURCE Toggle to select the connected devices SLEEP Press to activate the sleep timer FORMAT Selects a picture format laa gt gt Press to skip backward or forward chapters titles or racks on a disc lt p gt Press to search backward or forward through the disc LINK Press to call up various menu s from your fun Link connected device through an HDMI cable E Press to stop the disc playback Il Press to pause t
35. er s Manual 7 Stand assembly 8 Attaching the base 8 Mounting the unit on your furniture 8 Managing cables 9 Installing the remote control batteries 9 Remote control 10 Control panel 11 Terminals 11 Connecting the antenna or the cable 12 Plugging in the AC power cord 12 Initial setup 13 4 Use your TV 14 Switching on your TV and putting it in standby mode 14 Adjusting volume 14 Switching channels 14 Watching channels from an external device 15 Using auto mode 15 Sleep timer 15 Switching audio mode 15 fun Link options 6 Changing picture format 16 TV screen information 17 5 Use more of your TV 18 Displaying the main menu 18 Picture 19 Sound 20 Setup 20 Autoprogram 20 Channel list 21 Add channels 21 Antenna confirmation 21 Features 22 Caption settings 22 Child and ratings lock 23 PC settings 25 fun Link HDMI CEC 26 Setting your location to home 27 E sticker 27 Language 27 USB 28 6 Upgrade your TV software 29 Checking your current software version 29 Upgrading the software 29 7 Connecting devices 30 Selecting your connection quality 30 Connecting your devices 30 8 Useful tips 33 FAQ 33 Troubleshooting 33 9 Information 35 Glossary 35 Maintenance 35 10 Specifications 36 11 Warranty 37 English 3 English Return your Product Registration Card or visit at www magnavox com support today to get the very most from your purchase Registering your model with MAGNAVOX makes you eligible for all of th
36. few seconds till the picture appears e g gt gt MIXTE DTV AnalogTV channel y Video EZM a oa e Pressing A reverses the direction of the Input modes 2 Use the remote control of the set top box or the connected device to select channels Using auto mode Press AUTO MODE to set your TV to a predefined picture and sound setting SOURCE SLEEP FORMAT 2 Use A Vio select one of the following settings Auto picture Auto sound Description The customized settings you defined usin Personal 8s y 8 he Picture and Sound menu Standard For normal TV viewing Vivid Enhanced picture contrast sharpness and sound for viewing in a well lit room Brilliant picture settings and clear sound for Sports high action Deep picture and powerful sound settings Movie for a cinematic experience Game Optimized for PCs and game consoles Eco Eco TV settings for low power consumption Music Optimized for music playback Controls picture tone and set the anchor s News P voice at a comfortable volume 15 English Sleep timer Sleep Timer can set the unit to go into Standby mode after an incremental period of time AUTO MODE SAP Press SLEEP repeatedly to change the amount of time increases the time by 30 minutes up to 120 minutes Sleep 120min Press SLEEP once to call up the display for checking the remaining time e To cancel s
37. fficiency for home setting and it can be adjusted through a choice of picture and sound quality according to your preference Use this setting to remove the E sticker if visible from the display m p 27 When the initial setup is completed the lowest memorized channel with the confirmation message of the location setting will be displayed on the TV screen You must set Home in step 4 Otherwise Picture and Sound settings you adjusted will not be memorized after the unit goes into Standby mode e Ifyou are not receiving a signal from your cable service contact the Cable provider e Ifyou press or MENU during autoprogram this setup of TV channels will be canceled The initial autoprogram function can be executed for either Antenna or Cable only once When you change the connection Antenna Cable set Autoprogram again m p 20 If there is no signal Input from the antenna terminal and no operation for several seconds after you Turn On the unit helpful hints appears Follow the instructions listed on the TV screen Initial setup Retry No channel is registered Try Autoprogram again Verify that you have a cable connected to the ANTENNA IN jack on the back of the TV the channel installation process searches this connection If you are using a cable or satellite box please confirm the input which you have connected to the box and press SOURCE key on the remote control to select the a
38. filled with liquids such as vases shall be placed on the apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert ATTENTION Pour viter les choc lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond MAGNAVOX Visit our World Wide Web Site at www magnavox com support CHILD SAFETY Congratulations on your purchase It Makes A Difference How and Where As you enjoy your new product i ou ra please keep these safety tips in mind THE ISSUE e The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases However flat panel displays are not always supported on the proper stands or installed according to the manufacturer s recommendations e Flat panel displays that are inappropriately situated on dressers bookcases shelves desks speakers chests or carts may fall over and cause injury THIS MANUFACTURER CARES e The consumer electronics industry is committed to making home entertainment enjoyable and safe TUNE INTO SAFETY e One size does NOT fit all Follow the manufacturer s recommendations for the safe installation and use of your flat panel display Carefully read and understand all enclosed instructions for proper use of this product Don t allow children to climb on or play with furniture and television sets Don t place flat panel displays on furnitu
39. ge the output mode by pressing SAP Refer to Switching audio mode im p 15 Stereo to output stereo audio Primary MTS Mono to output mono audio SAP to output second audio program 20 Setup Before you begin Make sure the unit is connected to antenna or cable 1 Press MENU and use A Y to select Setup then press OK Autoprogram Channel list Add channels Antenna 2 Adjust the following items Autoprogram Be sure the RF cable is correctly connected to this unit and you are registered with your cable TV provider when you install Cable channels 1 Use A Y to select Autoprogram then press OK e If you run Autoprogram when you have locked channels a message appears asking to enter your PIN Enter your PIN in order to complete the installation You need to set the channel ock again after the installation 2 Use A Y to select an appropriate option then press OK When Antenna is selected the TV detects antenna signals t searches for DTV and Analog TV channels available in your area When Cable is selected the TV detects signals supplied by cable It searches for DTV Analog TV and Cable channels available in your area Autoprogram will rescan all channels Back Auto programming may take more than 20 _ So minutes to complete Select your signal source Antenna T i Cable Or Ci Gm antenna IN Continued on next page English e When the scanning and
40. h shielded cables with metallic RFI EMI connector hoods to maintain compliance with FCC Rules and Regulations Canadian notice This Class B Digital apparatus complies with Canadian ICES 003 Standard Television Receiving Apparatus Canada BETS 7 NTMR 7 Copyright All other registered and unregistered trademarks are the property of their respective owners The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Home HIGH DEFINITION MULTIMEDIA INTERFACE Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DOLBY DIGITAL TruSurround XT technology is incorporated under license from SRS Labs Inc SRS TruSurround XT creates a truly immersive surround sound experience with rich bass and clear dialog from only two speakers Si S TruSurround XT Portions of this software are copyright The FreeType Project www freetype org The American Academy of Pediatrics discourages television viewing for children younger than two years of age 2012 Funai Electric Co Ltd All rights reserved No part of this Owner s Manual may be reproduced copied transmitted disseminated transcribed downloaded or stored in any storage medium in any form or for any purpose without the express prior written consent of Funai Fu
41. hannels are highlighted e When you remove a main channel its subchannels are removed as well Note e The channel with DTV indicated on the display is ATSC Otherwise the channel is Analog TV 21 English Add channels This function lets you add the off the air Analog TV or Analog Cable channels that were not added by the autoprogram due to reception conditions during the initial setting 1 Use A Y to select Add channels then press OK 2 Use the NUMBER buttons to enter the number of the channel you want to add then press OK Add channels For analog channels select a channel to be added using number keys For digital channels you must perform Autoprogram function BACK E Ch Change Q Back Note If setup completes successfully Added to the channel list is displayed e If external Input is used it is not possible to register the channel and Unavailable will be displayed on the TV screen Some channels cannot be selected by CH Use the NUMBER buttons to select the memorised channels Antenna confirmation This function lets you check the Digital signal strength of each channel 1 Use A to select Antenna then press OK 2 Use the NUMBER buttons or CH to select the channel for which you want to check the Digital signal strength Back NY Commun Current 50 Note e Ifthe channel is set to Analog channel or external Input you cannot confirm the
42. he disc playback gt Press to begin or restart the disc playback COLOR buttons Functionally useful for fun Link INFO Displays information about the TV channel or accessory device MENU Press to display the main menu Control panel lt 4 vo gt MENU SOURCE Y cH A MENU SOURCE eH Terminals COAXIAL L ona ag 11 English VOL lt gt Touch to adjust volume down lt 4 up gt or to move left lt 4 right when selecting menu items CH A Y Touch to select channels or to move up A down when selecting menu items MENU Touch to display the main menu SOURCE Touch to select the connected devices D POWER ON STANDBY ON Touch to Turn the unit On and go into Standby mode To completely Turn Off the unit you must unplug the AC power cord Power On indicator Lights up red when the unit is in Standby mode and flashes while the unit is Turning On Infrared sensor Receives IR signals from remote control Digital Audio Output jack Digital Audio S PDIF Output to home theaters and other Digital Audio systems Component Y Pb Pr Composite Video VIDEO Input jacks for VIDEO Composite Video Input VIDEO jack is shared jack with Component Video Input Y jack Analog Audio L R Input jacks Connect Analog Audio signals from HDMI DVI Analog Audio L R jacks signal Componen
43. he model number of your TV to find information Checking your current software version Press MENU and use A Y to select Features then press OK 2 Use A Y to select Software upgrade then press OK Current software info Upgrade Features 3 Use A to select Current software info then press OK e The version and a description of the current software is displayed Release Version XXXXXXX_XX_XX_XXXX_XX Features Upgrading the software You can upgrade the software by using USB Memory Stick Preparing for the software upgrade You require the following equipment e A PC with web browsing capability e An archive utility that supports the ZIP format e g WinZip for Windows or Stufflt for Mac OS e An empty clean formatted USB Memory Stick Note Only FAT DOS formatted portable memory is supported e Use only software upgrades that can be found on the Magnavox web site 29 Warning e When the software upgrade is running don t press any buttons Do not remove the USB Memory Stick during the software upgrade e Ifan error occurs during the upgrade retry the procedure or for further assistance please contact Call Center Downloading the software Find information and software related to your TV and download the latest software upgrade file to your PC 1 On your PC open a web browser and go to www magnavox com support download_list php Enter the model numbe
44. he original product in current inventory or 3 refund the original purchase price of the product Replacement products or parts provided under this warranty are covered against defects in materials and workmanship from the date of the replacement or repair for ninety 90 days or for the remaining portion of the original product s warranty whichever provides longer coverage for you When a product or part is exchanged any replacement item becomes your property and the replaced item becomes company property When a refund is given your product becomes company property Note Any product sold and identified as refurbished or renewed carries a ninety 90 day limited warranty Replacement product can only be sent if all warranty requirements are met Failure to follow all requirements can result in delay WHAT IS NOT COVERED EXCLUSIONS AND LIMI TATIONS This Limited Warranty applies only to new company manufac tured products that can be identified by the trademark trade name or logo affixed to it This Limited Warranty does not apply to any hardware product or any software even if packaged or sold with the product as manufacturers suppliers or publishers may provide a separate warranty for their own products pack aged with the bundled product The company is not liable for any damage to or loss of any pro grams data or other information stored on any media contained within the product or other additional product or part no
45. ice programs Displays Input characters on the c Paint on TV creen immediately CC 4 Once characters are stored in T2 Pop on memory they are displayed all 7 at once and T 4 Displays the characters Roll up continuously by scrolling max 4 lines You can choose the size font color background and other characteristics of the caption text Font style Closed Captioning font Font Font size style size color and Font color transparency can be changed Font opacity Caption style Background Background color and B d color transparency of the ackgroun Background displayed caption can be gre switched opacity Edge color Edge color and type of Edge the displayed caption can Edge type be switched Picture display Edge color and Edge type Background Background color and Background opacity e Review your setting choice made below by looking in the upper right corner of the displayed setting box not all selections show the differences selected Continued on next page English 23 English Note Channel lock e Digital caption service that you can switch differs depending on the broadcast description Caption style will not effect if the User setting is set to Of e Closed Captioning service may not be controlled by this unit s menu options if you are US movie ratings lock US TV ratings lock watching television through an external cable or satellite set top box
46. ition Clock Phase 2 Use A Y to select the item you want to adjust then press OK e The horizontal vertical position clock and phase of the PC screen are automatically adjusted Auto adjustment Select if you want to adjust automatically Cursor lt 4 Cursor gt Horizontal position to move PC screen left to move PC screen right Vertical position to move PC screen down to move PC screen up Clock Phase to decrease setting value to increase setting value You may not obtain an appropriate screen with Auto adjustment for some signals In this case adjust the settings manually e Adjust Phase setting after Clock setting has been properly adjusted fun Link HDMI CEC This function allows you to operate the linked functions between our brand devices with a fun Link feature and this unit connecting through an HDMI cable You must connect this unit to our brand fun Link devices and be sure its fun Link HDMI CEC setting is also set to On 1 Use A Y to select fun Link HDMI CEC then press OK fun Link control Auto device off Auto TV on Features Device control Device list 2 Use AV 4 to select the item you want to adjust then press OK Set the fun Link control On or Off The following additional settings will be grayed out when you set to Off Off Disables all fun Link fun Link control Selects if you have connected an On external device that is comp
47. leep timer press SLEEP repeatedly until Off is displayed Switching audio mode SOURCE SLEEP FORMAT Digital TV operation Press SAP to display the currently selected language and the number of available languages 11 1 English 1 3 2 Press SAP repeatedly to cycle through the available audio languages Note e Available languages differ depending on the broadcast Other is displayed when the audio language cannot be acquired or the acquired languages are other than English French or Spanish Press SAP to display the currently selected audio mode 2 While receiving an MTS broadcast press repeatedly to cycle through the available audio 11 channels SAP STEREO e g When all audio are available a a ESS STEREO Outputs stereo audio SAP Outputs second audio program MONO Outputs mono audio fun Link options If you have our brand products such as Blu ray disc player or DVD recorder that are compatible with fun Link functions connect them to this unit via an HDMI cable so you can simply operate various items from this unit s remote control Before you begin You must set On in Device control and fun Link control m p 26 Otherwise LINK does not work even if you connected our brand devices to this unit To enjoy fun Link verified and recommended devices are as follows MAGNAVOX MBP1300 MBP5320 MRD430B MRD733B Press LINK to display fun Link options menu fu
48. log TV it should also work for DTV reception Outdoor or attic antennas will be more effective than a set top box or inside antenna ToTurn On your reception source easily between antenna and cable install an antenna selector e Ifyou are not receiving a signal from your cable service contact the Cable provider Only the left loudspeaker reproduces sound for mono equipment Use a mono to stereo adapter not supplied for sound reproduction via all internal loudspeakers Plugging in the AC power cord Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are made 2 Caution Do not connect the AC power cord to a power supply outside the indicated voltage of this unit AC 120V Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks Each time you plug in the AC power cord no operations will be performed for a few seconds This is not a malfunction English These operations are accessible by remote control Some may also be accessible by control panel on the main unit Initial setup This section will guide you through the unit s initial setting which includes selecting a language for your on screen menu and autoprogram which automatically scans and memorizes viewable channels Before you begin Make sure the unit is connected to antenna or cable 1
49. m set top box or Selecting your connection quality ER _ f IN OUT Blu ray disc player HDMI Highest quality 1 LB HDMI cable 0 o F HD game console HDMI DVI connection This unit can be connected to your device that has a DVI terminal Supports high definition Digital signals and gives highest picture and Use an HDMI DVI conversion cable for this connection and it requires sound quality Video and audio signals are combined in one cable audio cable for Analog Audio signal as well You must use HDMI for full high definition video and to enable fun Link HDMI CEC Note e Magnavox HDMI supports HDCP High bandwidth Digital Contents Protection HDCP is a form of Digital Rights Management that protects high definition content in cable receiver or satellite box with the Blu ray discs or DVDs nt oUr DVI Output jack CES pin i tall 000 an A i Le OO SS 5 gt 1 HDMI DVI FRE Component Y Pb Pr High quality gt conversion cable OUT IN Audio L R cables i Use an HDMI cable with the HDMI logo a certified HDMI cable High Speed HDMI cable is recommended for the better compatibility Supports high definition Analog signals but gives lower picture quality than For HDMI connection e The unit accepts 480i 480p 720p 1
50. n Link options Devi enu Device contents Device favorite Device menu Controls the menu of your connected fun Link device Device contents Controls the top menu of your DVD or Blu ray discs Device favorite Controls the pop up menu of your Blu ray discs 2 Use A Wor OK on this units remote control to operate the desired functions for your devices Note Some of fun Link functions may not be available depending on your fun Link devices or discs e You must connect this unit to our brand fun Link devices and be sure its fun Link HDMI CEC setting is also set to On We do not guarantee 100 interoperability with other brands of HDMI link compliant devices Changing picture format Display modes can be selected when your TV receives a 16 9 or 4 3 video signal Three types of display modes can be selected for a PC Input signal Press FORMAT repeatedly to switch the TV aspect ratio AUTO MODE 16 For 16 9 video signal gt Normal Movie expand Full can also be selected after Wide if an HDMI device is selected This picture format similarly displays like Normal Full HDMI device only Normal Original size 43 Shortened horizontally Sidebars appear on both edges of the screen Vertically stretched to fill the screen Movie expand This only crops out the top of the picture Maximum size without changing its horizontal
51. n attaching the base ensure that FRONT with arrow written on the bottom of the base is downward If it s not downward the 2 hooks don t fit into the base e When attaching the base ensure that all screws are tightly fastened If the base is not properly attached it could cause the unit to fall resulting in injuries as well as damage to the unit To remove the base from this unit unscrew the Phillips head screws in step 2 Be careful not to drop the base when you remove it Mounting the unit on your furniture 39 inch TVs only Screw this unit on your furniture tightly using wood screw not supplied in the hole at the back of the base as shown e Recommended screw dimension 3 16 x 3 4 inches 5 1 x 20 mm rear of this unit screw hole Note e When you remove this unit make sure to unscrew the wood screw from your Wood Stand Furniture and other wood item English 9 English Managing cables Route your antenna cable and all other cables through the cable management tie at the back of the TV The holder helps keep your cables tidy and easily manageable d Attach the cable management tie as illustrated below Slide the battery cover off the back of the remote control Insert the 2 supplied batteries AAA 1 5V Be sure the and ends of the batteries line up with the markings inside the case U N Slide the cover back into position Note e R
52. ng video signals HDMI Input 480i p 720p 1080 p 24Hz 60Hz PC Input signal up to FHD 1920 x 1080 Audio L R Input PC Input via VGA HDMI and HDMI DVI Analog Audio L R USB Digital Audio Output supporting Dolby Digital Headphone Output 1 8 inches 3 5mm Temperature Operating temperature 41 F 5 C to 104 F 40 C Specifications are subject to change without prior notice 11 Warranty 87 English LIMITED WARRANTY NINETY 90 DAY LABOR ONE 1 YEAR PARTS WARRANTY COVERAGE This warranty obligation is limited to the terms as set forth below WHO IS COVERED This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase Warranty Period from an Authorized Dealer The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof WHAT IS COVERED This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period At its option the company will either 1 repair the product at no charge using new or refurbished replacement parts or 2 exchange the product with a product that is new or which has been manufactured from new or ser viceable used parts and is at least functionally equivalent or most comparable to t
53. nger being sent by major broadcasting stations in the USA Aspect ratio The width of a TV screen relative to its height Conventional TVs are 4 3 in other words the TV screen is almost square widescreen models are 16 9 the TV screen is almost twice as wide as its height CEC Consumer Electronics Control This allows you to operate the linked functions between our brand devices with CEC feature and this unit We do not guarantee 100 interoperability with other brands of CEC compliant devices Component Video This is a video signal format that conveys each of 3 principal colors of light red blue and green through different signal lines This allows the viewers to experience picture colors as original as it is There are several signal formats including Y Pb Pr andY Cb Cr Dolby Digital The system developed by Dolby Laboratories to compress Digital sound It offers stereo sound 2ch or multi channel audio DTV ATSC nitialism that stands for Advanced Television Systems Committee and the name of the Digital broadcasting standards E sticker E sticker is showing set features technical information etc on this TV set hat is displayed on the TV screen mainly used by TV retailers Previously the information was on a printed sticker that was put on the display HDMI High Definition Multimedia Interface nterface that supports all uncompressed Digital Audio Video formats including set top box Blu ray DVD recorde
54. ose of according to all local state and federal laws Magnavox pays a lot of attention to produce environment friendly products in green focal areas Your new TV contains materials which can be recycled and reused At the end of its life specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of Please ensure you dispose of your old TV according to local regulations Disposal of used batteries The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations 3 Get started Features DTV Analog TV CATV You can use your remote control to select channels which are broadcast in Digital format and conventional Analog format Also cable subscribers can access their cable TV channels Information display You can display the title contents DTV only and other information of the current program on the TV screen Autoprogram This unit automatically scans and memorizes channels available in your area eliminating difficult setup procedures Child lock This feature allows you to block children s access to inappropriate programs Closed Caption decoder Built in Closed Caption decoder displays text for Closed Caption supported programs MTS SAP tuner Audio can
55. ppear on the TV screen ake sure that the volume is NOT set to 0 or dx If so use VOL to adjust to the desired volume No color e View other TV channels The problem might be limited to the broadcasting station or weak signal strength e Adjust Color in Picture settings m p 19 No sound distorted sound or e Make sure that the Analog Audio signals from the HDMI DVI device are connected to the Analog Audio L R Input jacks incorrect Audio Sound is heard When using Component Analog Video Composite Analog Video or PC VGA Video make sure that the Analog Audio UR when using the HDMI DVI connectors are mounted into the Audio L R Input jacks connections Adjusted Picture or Sound e You must set Home in Location m p 27 settings are not effective every Otherwise the settings you adjusted will not be memorized after the unit goes into Standby mode time the unit is Turned On Sound OK picture poor e Electrical interference from nearby appliances may affect picture quality e Adjust Contrast and Brightness in Picture settings m p 19 e View other TV channels The problem might be limited to the broadcasting station or weak signal strength e For the best picture quality watch High Definition wide screen programs If the HD content is not available watch Standard Definition programs instead Picture OK sound poor e View other TV channels The problem might be limited to the broadcasting st
56. ppropriate source input MENU mes Skip DO Select After an initial setup is completed e If you want to scan the channels automatically again Autoprogram m p 20 e You can add the desired cable and Analog channels unmemorized by autoprogram Add channels im p 21 e If you want to change to another language Language m p 27 o change the location setting m p 27 e If you wan Location English 4 Use your TV Switching on your TV and putting it in standby mode 4 vi gt MENU D SOURCE Y cH A The above image is an example for 50 inch screen size TVs It may differ depending on what product you purchased To Turn Power On or to Turn Standby On e Touch or press D on the front panel or the remote control Note e Energy consumption contributes to air and water pollution When the AC power cord is plugged in your TV consumes energy Your TV has very low standby power consumption Adjusting volume source Y cH A e The above image is an example for 50 inch screen size TVs It may differ depending on what product you purchased To increase or decrease volume e Touch VOL lt 4 down P up on the front panel or press VOL on the remote control To mute or unmute sound e Press o on the remote control to mute the sound e Press dX again or VOL to recover the original sound 14 English Switching channels 1
57. r PC that has a HDMI terminal Use an HDMI cable for this Digital connection IN OUT OE on HDMI cable PC HDMI DVI connection This unit can be connected to your PC that has a DVI terminal Use an HDMI DVI conversion cable for this Video Digital connection and it requires Stereo mini 3 5mm plug Audio cable for Analog Audio signal as well IN OUT U HDMI DVI PC conversion cable IN OUT Stereo mini 3 5 mm plug Audio cable VGA connection This unit is equipped with a PC Input jack If you connect this unit to your PC you can use this unit as a PC monitor Use aVGA cable for this Video connection and it requires a Stereo mini 3 5mm plug Audio cable for Analog Audio signal as well VGA cable Ce PC IN OUT Stereo mini 3 5 mm plug Audio cable 32 The following video signals can be displayed Format Resolution Refresh rate VGA 640 x 480 SVGA 800 x 600 XGA 1 024 x 768 60Hz 1 280 x 768 WXGA 1 360 x 768 FHD 1 920 x 1 080 Other formats or non standard signals will not be displayed correctly e Please purchase the VGA cable or HDMI DVI conversion cable that has a ferrite core The following operations may reduce noise Attach a ferrite core to the AC power cord of
58. r in the Type the Model Number field 2 3 Click the desired software to be downloaded e Decompress the ZIP file 4 Copy the upgrade file to the root directory of the USB Memory Stick Starting the software upgrade Connect your USB Memory Stick with the upgrade file to the USB terminal on the side of your TV S Press MENU and use A to select Features then press OK Use A Y to select Software upgrade then press OK Use A Y to select Upgrade then press OK Read the on screen instructions and confirm that you want to continue with the installation U A WN Start now Would you like to upgrade the software Features 6 When the software upgrade is completed press to set the unit to go into Standby mode then remove the USB Memory Stick and then press b again to Turn the unit On e The TV starts up with the new software For further assistance please contact Call Center 30 Engish 7 Connecting devices Connecting your devices HDMI Digital connection No supplied cables are used with these connections e Please purchase the necessary cables at your local store DMI connection offers the highest picture quality DMI High Definition Multimedia Interface transports high definition Digital video and multi channel Digital Audio through a single cable Before you connect AC power cord Be sure other devices are connected properly before plugging in the AC power cord C e
59. r or Digital television over a single cable HDTV High Definition TV Ultimate Digital format that produces high resolution and high picture quality PIN code A stored 4 digit number that allows access to parental control features SAP Secondary Audio Program Second audio channel delivered separately from main audio channel This audio channel is used as an alternate in bilingual broadcasting SDTV Standard Definition TV Standard Digital format that is similar to the Analog TV picture quality SRS TruSurround XT Creates a truly immersive surround sound experience with rich bass and clear dialog from only two speakers 35 Maintenance Cabinet Cleaning e Wipe the front panel and other exterior surfaces of the unit with a soft cloth Never use a solvent or alcohol Do not spray insecticide liquid near the unit Such chemicals may cause damage and discoloration to the exposed surfaces Panel Cleaning Wipe the panel of the unit with a soft cloth Before cleaning the panel disconnect the AC power cord Should your unit become inoperative do not try to correct the problem yourself There are no user serviceable parts inside Call our toll free customer support line found on the cover of this Owner s Manual to locate an authorized service center IR Signal Check If the remote control is not working properly you can use a Digital camera including a cellular phone with built in camera to see if it is
60. rating accordingly unusual results may occur and the unit may not receive emergency bulletins or other types of programming Emergency Bulletins Such as EAS messages weather warnings and others Locally originated programming News Political Public Service Announcements Religious Sports Weather Change PIN Although the default PIN code 0000 is supplied with the unit you can set your own PIN code 3 Use A Y to select Change PIN then press OK 4 Press the NUMBER buttons to enter the new 4 digit PIN code e Enter PIN code again in Confirm PIN entry field Enter PIN Eas Features Confirm PIN BACK EE PIN Code Back Note e Make sure new PIN code and confirm PIN code must be exactly the same If they are different the space is cleared for reentering Your PIN code will be erased and returns to the default PIN code 0000 when a power failure occurs e Ifyou forget the PIN code unplug the AC power cord then wait for 10 seconds to plug the AC power cord in again The unit will restore the PIN code to 0000 as the factory default 25 PC settings This function lets you adjust the PC screen position clock and phase during PC Input Use lt P to adjust Clock setting to stabilize the PC screen and Phase setting to improve the clarity of the PC screen 1 Use A Y to select PC settings then press OK uto adjustment Horizontal position Features Vertical pos
61. re that can easily be used as steps such as a chest of drawers Remember that children can become excited while watching a program especially on a larger than life flat pane display Care should be taken to place or install the display where it cannot be pushed pulled over or knocked down Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children WALL MOUNTING IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY ALWAYS e Use a mount that has been recommended by the display manufacturer and or listed by an independent laboratory such as UL CSA ETL e Follow all instructions supplied by the display and wall mount manufacturers e If you have any doubts about your ability to safely install your flat panel display contact your retailer about professional installation e Make sure that the wall where you are mounting the display is appropriate Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction Consumer Electronics Association If you are unsure contact a professional installer e A minimum of two people are required for installation Flat panel displays can be heavy www CE org safety 4 English Important Safety Instructions Read these instructions eep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only
62. re you select the correct Source by using SOURCE pU In OUT N SEN j I M HDMI cable set top box If you connect a set top box through Component Video Input If the TV is connected to a cable box or satellite set top box via Component Video Input make sure you select the correct Component Video Source by using SOURCE Audio L R cables pea IN SS IN 000 ose OUT set top box IN Component Y Pb Pr video cables 112 Connecting a set top box Blu ray disc DVD recorder via composite connectors and Analog Audio Do not place your recorder too close to the screen because some recorders can be susceptible to signals OUT cable set top box RF cable IN DE RF cable OUT D i OUT Audio L R Video cables Core IN OUT A IN z LA IN Audio L R Video cables Coo Blu ray disc DVD recorder E e Ifyou have any question about the DTV s antenna visit www antennaweb org for further nformation e Depending on your antenna system you may need different types of combiners mixers or separators splitters for HDTV signal The minimum RF bandpass on these devices is 2 000MHz or 2GHz e For your safety and to avoid damage to this unit please unplug the RF coaxial cable from the antenna Input jack before moving the unit e Ifyou did use an antenna to receive Ana
63. ress OK 4 Use A Y to selec US movie ratings lock or US TV ratings lock the desired rating then press OK repeatedly to switch between view and block specific elemen or Cindi cates tha e For USTV ratings you can further set the sub ratings to block s of programming indicates that the rating is locked the rating is not locked US movie ratings lock Features O O Features E L c O L ue movie US TV ratings Description ratings All All ratings locked including no rating NR None No rating TV Y Appropriate for all children TV Y7 Appropriate for all children 7 and older G TV G General audience PG TV PG Parental guidance suggested PG 13 Unsuitable for children under 13 TV 14 Unsuitable for children under 14 R _ Restricted under 17 requires accompanying parent or adult guardian NC 17 o one under 17 admitted X TV MA ature audience only To set the sub ratings 24 As for TV Y7 TV PG TV 14 or TV MA you can further set the sub ratings to block specific elements of programming To set the sub ratings follow the step below Use A V lt P to select the desired rating then press OK repeatedly to switch between and Features Oo Oo oO VA 0O Oo oO oO FY Fantasy Violence US TV ratings Sub Rating TV Y7 FV Fantasy Violence TV PG D Dialog L Language
64. rthermore any unauthorized commercial distribution of this Owner s Manual or any revision hereto is strictly prohibited 2 Important Positioning the TV e Large screen TVs are heavy 2 people are required to carry and handle a large screen TV e ake sure to hold the upper and bottom frames of the unit firmly as illustrated e Install the unit in a horizontal and stable position Do not install the unit in direct sunlight or in a place subject to dust or strong vibration e Depending on the environment the temperature of this unit may increase slightly This is not a malfunction e Avoid a place with drastic temperature changes Do not place anything directly on top or bottom of the unit e Depending on your external devices noise or disturbance of the picture and or sound may be generated if the unit is placed too close to them In this case please ensure enough space between he external devices and the unit Do not insert the AC power cord into the power socket outlet before all the connections are made e Ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power e Before you move the TV disconnect attached cables to prevent damage to connectors e Be sure to unplug the AC power cord from the AC outlet before moving or carrying the unit Regulatory notices Do not place the unit on the furniture that is capable of being tilted b
65. rticular channels or external Input modes can be invisible in this e When the unit receives special effects playback signal e g Search Slow and Still from a function VCR s video Output channel ch3 or ch4 the unit may not display the correct caption or text 3 Use A Y to select Channel lock then press OK 4 Use A Y to select the particular channels or external Input then Child and ratings lock press OK repeatedly to switch between view and block X indicates that the channel or Input Source is locked You can prevent your children from watching certain programs or LJindicates that the channel or Input Source is not locked certain channels by locking the TV controls and by using ratings C HDMI C HDMI2 C HDMB Features Video 1 Use A Y to select Child lock then press OK Caption settings Child lock PC settings Features fun Link HDMI CEC O PC C 40 1 XI 40 2 Location Software upgrade 2 Use the NUMBER buttons to enter the 4 digit numbers for your PIN code e When you have not set up your PIN code enter 0 0 0 0 e When the PIN code is correct Child lock menu is displayed See the following description for setting each item Setting US movie and TV ratings US movie ratings lock is the rating system created by MPAA US TV ratings lock has controlled access to individual programs based on their age ratings and content rating 3 Use AY to selec then p
66. sending out an infrared signal With a Digital camera including built in cell phone cameras Point the Digital Camera towards the remote control infrared diode at the front of the remote control Press any button on the remote control and look hrough the camera display If the infrared pulsating ight appears through the camera the remote control is sending out an IR signal English 36 English 10 Specifications Model 50MF412B 39MF412B Type FHD 1920 x 1080 pixels 60Hz Aspect ratio 16 9 Viewing angles 176 V by 176 H Built in Digital tuner ATSC NTSC Mono Stereo Mono Stereo SRS TruSurround XT Power Output RMS watts 10W x 2 Equalizer 5 band Ease of use D 4 3 Source Normal 16 9 Movie expand Zoom Wide D 16 9 Source Normal 4 3 Movie expand Zoom Wide Pictire format DMI AV 4 3 Source Normal 16 9 Movie expand Zoom Wide Full DMI AV 16 9 Source Normal 4 3 Movie expand Zoom Wide Full PC Source Normal Full Unscaled Refer to HDMI AV 16 9 Source above if PC has HDMI Output Photo Slide show JPEG files only Video playback Motion JPEG 320 x 240 30fps and file extension avi only Connectivity 1 Component Video Input Y Pb Pr supporting video signals 480i p 720p 1080i 60Hz Composite Video Input J shared terminal with Y of components 3 supporti
67. t Video Analog Audio L R jacks signal Composite Video Analog Audio L R jacks signal PC Connection Analog Audio L R jacks signal with Stereo mini 3 5mm plug Audio cable on PC HDMI Input jack s Digital audio and video Input from high definition Digital devices such as Blu ray disc players cable boxes and satellite set top boxes PC Input jack VGA cable connection for PC USB terminal Data Input from USB Memory Stick only Do not connect any device to this terminal such as Digital camera keyboard mouse etc 75 ohm Cable Antenna connection Signal Input from an antenna cable or satellite Headphone Audio Output jack Headphone 3 5mm stereo jack for personal listening Connecting the antenna or the cable Be sure your antenna or other device is connected properly before plugging in the AC power cord If you connect to an antenna through RF cable Any DTV programs that are broadcasted in your area can be received for free through an antenna connection cable RF cable If you connect a set top box through RF cable If the TV is connected to a cable box or satellite set top box via a coaxial connection set the TV to channel 3 4 or the channel specified by the service provider antenna IN RF cable set top box If you connect a set top box through HDMI If the TV is connected to a cable box or satellite set top box via HDMI make su
68. t cov ered by this warranty Recovery or reinstallation of programs data or other information is not covered under this Limited Warranty This warranty does not apply a to damage caused by accident abuse misuse neglect misapplication or non supplied product b to damage caused by service performed by anyone other than company approved Authorized Service Location c to a product or a part that has been modified without written company per mission or d if any serial number has been removed or defaced or e product accessories or consumables sold AS IS without warranty of any kind by including refurbished product sold AS IS by some retailers This Limited Warranty does not cover e Shipping charges to return defective product e Labor charges for installation or setup of the product adjust ment of customer controls on the product and installation or repair of antenna signal source systems outside of the product e Product repair and or part replacement because of improper installation or maintenance connections to improper voltage supply power line surge lightning damage retained images or screen markings resulting from viewing fixed stationary con tent for extended periods product cosmetic appearance items due to normal wear and tear unauthorized repair or other cause not within the control of the company e Damage or claims for products not being available for use or for lost data or lost software
69. tability must be obtained Funai warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Funai cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Funai will be adapted and published on he Funai support website as soon as possible Pixel characteristics This LCD product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Service Centers and official repair shops Failure to do so shall void any warranty stated or implied Any operation expressly prohibited in this Owner s Manual any adjustments or assembly procedures not recommended or authorized in this Owner s Manual shall void the warranty Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B Digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installa
70. tion This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for help Declaration of Conformity Trade Name MAGNAVOX Responsible Party FUNAI CORPORATION Inc Model 50MF41 2B 39MF412B Address 19900 Van Ness Avenue Torrance CA 90501 U S A Telephone Number 1 866 341 3738 5 English Modifications This apparatus may generate or use radio frequency energy Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the Owner s Manual The user could lose the authority to operate this apparatus if an unauthorized change or modification is made Cables Connections to this device must be made wit
71. truction Book Funai is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV Wall Mount Bracket or mount the TV onto the Bracket on your own The Wall Mount Bracket must be installed by experts 13 Unplug this apparatus during lightning storms or when unused for ong periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Example of Antenna Grounding as per NEC National Electric Code GROUND CLAMP ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H ELECTRIC SERVICE EQUIPMENT Funai is not liable for these types of accidents or injury noted below nstall the Wall Mount Bra
72. ualizer SRS TruSurround XT and Auto volume leveling Personal will be set automatically Auto sound Adjust the tonal quality for each frequency Cursor lt 4 Cursor gt Equalizer to adjust the each level of tonal quality Press BACK to go back to the previous menu This selects sound modes for more spatial or surround sound reproduction Off to set SRS TruSurround XT to Off SRS TruSurround XT On to set SRS TruSurround XT to On This function keeps a constant loudness differential between the TV commercials and the programs Off to remove the auto volume leveling Auto volume On to reduce volume differences between levelin g the TV commercials and the programs You can select the Audio Output from the unit s speakers or not If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit some sound operations such as volume up can be changed by using this unit s remote control Make sure fun Link control is set to On im p 26 On to output sound from the unit s speakers of not to output sound from the unit s speakers TV speakers to control Audio Output from your A connected fun Link Compliant Devices CEC Link Vith VOL by using this unit s remote control You can set the output mode as a default for the sound mode Analog TV only This setting is not interlocked when you chan
73. y a child and an adult leaning pulling standing or climbing on it A falling unit can cause serious injury or even death This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 4 inches 10cm or more around this apparatus Press to turn the unit on and go into standby mode To completely turn Off the unit you must unplug the AC power cord Disconnect the AC plug to shut the unit off when trouble is found or not in use The AC plug shall remain readily available Never use a gas duster on this TV The gas trapped inside of this unit may cause ignition and explosion CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type WARNING Batteries battery pack or battery installed shall not be exposed to excessive heat such as sunshine fire or the ike WARNING To prevent injury this apparatus must be securely attached to the furniture wall in accordance with the instructions Tipping shaking or rocking the unit may cause injury death 6 English Environmental care The packaging of this product is intended to be recycled Contact your local authorities for information about how to recycle the packaging For product recycling information please visit www magnavox com End of life directives z This LCDTV contains a lamp with Mercury please disp
74. y inappropriate programs set your limits in US movie ratings lock e Abbreviations symbols and other grammatical shortcuts may be used in order to keep US TV ratings lock and Region ratings lock pace with the on screen action This is not a malfunction The child lock setting will be retained after a power failure or after the power is e The caption or text characters will not be displayed while the main menu or functions removed for longer than 10 seconds except the PIN code reverts to 0000 display is shown Child and ratings lock im p 23 e fa black box appears on the TV screen this means that the Closed Caption is set to e Region ratings lock and Clear region ratings lock will be available when the unit the text mode To clear the box select CC 1 CC 2 CC 3 CC 4 or Off receives a Digital broadcast using the new rating system e Ifthe unit receives poor quality television signals the captions may contain errors or For the United States the unit may download the Region Ratings Lock Table if required there might be no captions at all Some possible causes of poor quality signals are The Canadian rating systems on this unit are based on CEA 766 A and CRTC policy Automobile ignition noise Electric motor noise Weak signal reception Multiplex signal reception ghosts or screen flutter Channel lock Data dropout and Pixelation for DTV only The unit retains the Closed Caption setting if the power fails Pa

Download Pdf Manuals

Related Search

Related Contents

Comdial DX-80 User Guide  Resolución 355 de 2014  Mode d`emploi  クラシック83シリーズ 取扱説明書  

Copyright © All rights reserved. Failed to retrieve file