Remote Control Owner`s Manual
Contents
1. 0 24h will be displayed If FAN mode is selected there will be no display ON OFF display This indicator will be displayed when the unit is operating Mode display FAN mode Fan speed display Displays the selected fan speed AUTO HIGH MED and LOW Nothing displays when the fan speed is selected in AUTO speed When AUTO or DRY Mode is selected there will be no signal displayed FOLLOW ME display When pressing FOLLOW ME button in COOL or HEAT mode the remote sensing function is activated and this indicator displays TIMER display This display area shows the settings of the TIMER That is if only the Auto on time function is set it will display TIMER ON If only the Auto off time function is set it will display TIMER OFF If both functions are set it will display TIMER ON OFF BUTTONS ED United Technologies turn to the experts L 3 BUTTONS UP Button NOTE 1 Vertical swing lonizer Smart eye Silence are not available for standard models 2 Buttons design might be slightly different from the actual one Press this button to increase the setting temperature DOWN Button Press this button to decrease the setting temperature MODE Button pee COOL DRY HEAT FAN Press the mode button repeatedly to change operation mode NOTE HEAT mode will not be activated fo2. heating capacity LED F P Button Press this button to clear or light the display on the indoor unit e During the heating operation only when the setting mode is HEAT pressthis button more than 2 seconds the freeze protection function is activated The unit will operate at high fan speed with the temperature automatically set to 8 C 46 F The display window of indoor unit will display FP For the unit without display area the defrost indicator light will be keeping on for 2 seconds and then be off for 2 seconds by turns Press ON OFF SLEEP F P MODE FAN SPEED UP DOWN button while operating will cancel the freeze protection function OPERATION United Technologies turn to the experts 27 4 OPERATION STEP 2 STEP 1 STEP 3 STEP2 STEP 1 STEP 4 Liew t Auto mode Ensure the unit is plugged in and power is available The OPERATION indicator on the display panel of the indoor unit starts flashing 1 Press the MODE button to select Auto 2 Press the UP DOWN button to set the desired temperature The temperature can be set within a range of 17 C 30 C 62 F 88 F in 1 C 2 F increments 3 Press the ON OFFbutton to start the air conditioner NOTE 1 In the Auto mode the air conditioner can logically choose the mode of Cooling Fan and Heating by sensing the difference between the actual ambient room temperature and th
3. unit turns off automatically atthe set time UNIT OFF Set the TIMER off as described in the UNIT ON section The TIMER display on the unit illuminates and the unit will remain off Adjust the TIMER OFF settings to 0 0 to cancel this option Timer ON and Timer OFF Use both functions to program the unit to turn on and shut off the at specified times UNIT OFF Set TIMER ON as previously described Set TIMER OFF as previously described The unit will start automatically at the set TIME ON and will turn off at the set TIME OFF UNIT ON Set TIME OFF as previously described Set TIME ON as previously described The unit will turn off automatically at the set TIME OFF and will turn on at the set TIME ON E
4. AHI CARRIER S E EUROPE AIRCONDITIONING S A 18 KIFISOU AVENUE 10442 ATHENS GREECE TEL 30 210 6796300 turn to the experts GB 3 United Technologies turn to the experts 27 A C REMOTE CONTROL OWNER S MANUAL ENGLISH MANUEL DE L UTILISATEUR FRANCAIS MANUAL DEL USUARIO ESPANOL USER MANUAL COD Qe io C ost 8 el aD n l MANUALE DELL UTENTE ITALIANO D GEBRAUCHSANWEISUNG DEUTSCH NL BEDIENING NEDERLANDS CONTENTS EE CONTENTS 1 Quick Start 2 Display AAEE AA NE AAA ea ee eee E E E ee eee 03 3 BUON SE 04 4 Operation E A a ee ee oe eae eee eee 08 m O QUICK START turn to the experts 27 1 QUICK START Step 5 Step 4 Step 6 Step 3 FIT BATTERIES SELECT MODE Auto Cool Dry Heat Fan t Step ru 4 Mode SELECT TEMPERATURE 17 C 30 C Step Step 2 5 TEMP PRESS POWER BUTTON SELECT FAN SPEED NOTE The unit will operate on Auto Low Med High default settings 24 C Auto mode Auto fan speed Step P l Step 3 On Of 6 DISPLAY 2 DISPLAY E EIE oe TIMER ON OFF Mode display Displays the selected mode AUTO COOL DRY HEAT Transmission Indicator This transmission indicator will light when remote controller transmits signals to the indoor unit Temp Timer display The temperature setting from 17 C 62 F to 30 C 88 F or timer setting
5. an Follow Me LED Turbo speed It has already been automatically O000 controlled Timer operation Timer ON only This function will allow the unit to start automatically at theset time The TIMER ON can be set while the unit is on or off UNIT ON Press the TIMER on button to initiate the auto on time sequence The set time is displayed in the rerrote contol display Every time the TIMER ON button is pressed the time will increase by 30 minutes up to 10 h It will increase by 60 minutes afterwards until the time setting reaches 24h When the TIMER ON is set the TIMER light on unit illuminates The unit will continue to run at theset time UNIT OFF Set the timer described in the UNIT ON section The unit will start at the set time Adjust the TIMER ON settings to 0 0 to cancel this OPERATION turn to the experts 27 4 OPERATION Timer OFF only This function will allow the unit to stop automatically at theset time The timer can be set while the unit is on orwhile it is off UNIT ON Press the TIMER orrF button to initiate the auto off time sequence The set time is displayed in the remote control display Every time the TIMER OFF button is pressed the time will increase by 30 minutes up to 10 h It will increase by 60 minutes afterwards until the time settings reach 24h When the TIMER OFF is set the timer light on the unit illuminates and the
6. e setting temperature on the remote controller 2 In the Auto mode you can not switch the fan speed It has already been automatically controlled 3 If the Auto mode is not comfortable for you the desired mode can be selected manually Cooling Heating Fan mode Ensure the unit is plugged in and power is available 1 Press the MODE button to select COOL HEAT or FAN mode 2 Press the UP DOWN buttons to set the desired temperature The temperature can be set within a range of 17 C 30 C 62 F 88 F in 1 C 2 F increments 3 Press the FAN button to select the fan speed in four steps Auto Low Med or High tsTeEP3 4 Press the ON OFF button to start the air conditioner NOTE In the FAN mode the setting temperature is not displayed in the remote controller and you are not able to control the room temperature either In this case only step 1 3 and 4 may be performed OPERATION 4 OPERATION Dry mode Ensure the unit is plugged in and power is available The OPERATION indicator on the display panel of the indoor unit starts flashing 1 Press the MODE button to select DRY mode 2 Press the UP DOWN buttons to set the desired temperature The temperature can be set within a range of 17 C 30 C 62 F 88 F in 1 C 2 F increments 3 Press the ON OFF button to start the air STEPA conditioner STEP 2 STEP 3 5 NOTE nese In the Dry mode you can not switch the fan Self Cle
7. program Press the button more than 2 seconds the ionizer simply adjust the auto on time to 0 0 function will be activated press more than 2 seconds again to disable TIMER OFF Button When the ionizer function is initiated the lonizer Press this button to initiate the auto off time A Plasma Dust Collector depending on models is Q sequence Each press will increase the auto energized and will help to remove pollen and timed setting in 30 minutes increments When A z impurities from the air the setting time displays 10 each press will H 3 increase the auto timed setting 60 minutes Piat L AA increments To cancel the auto timed program O Q O O FOLLOW ME SMART EYE Button simply adjust the auto off time to 0 0 I l e Disable Active FOLLOW ME function for Q each press SLEEP Button When the Follow Me function is activated e Active Disable sleep function It can maintain the remote display is actual temperature at the most comfortable temperature and save J its location The remote control will send this energy signal to the air conditioner every 3 minutes e For the detail see sleep operation in until press the FOLLOW ME button again USER S MANUAL The Folow Me function is not available under NOTE While the unit is running under DRY and FAN mode Switch the operation mode SLEEP mode it would be cancelled if or turn off the unit will cancel the Follow Me MODE FAN or ON OFF but
8. r cooling only models ON OFF Button 4 Operation starts when this button is pressed and stops when this button is pressed again SWING Button Q The horizontal louver will move an angle of 6 degree for each press If keep pushing more than 2 seconds the louver will swing up and down automatically SWING Button The vertical louver will move an angle of 6 degree for each press And the temperature display area of indoor unit displays pp for one second If keep pushing more than 2 seconds the vertical louver swing feature is activated And the indoor unit displays 1111 flash four times then the temperature setting reverts back If the vertical louver swing feature is stopped it displays LC and remains on for 3 seconds eee m O BUTTONS BUTTONS turn to the experts 27 3 BUTTONS 3 BUTTONS TIMER ON Button SELF CLEAN IONIZER Button Press this button to initiate the auto on time Active Disable SELF CLEAN function for each sequence Each press will increase the auto Press timed setting in 30 minutes increments When Under SELF CLEAN mode the air conditioner the setting time displays 10 each press will will automatically clean and dry the evaporator increase the auto timed setting 60 minutes and keep it as fresh for the next operation increments To cancel the auto timed
9. ton is pressed function automatically When press more than 2 seconds the SMART EYE function will be activated press more than 2 seconds again to disable Under SMART EYE mode with the built in infrared sensor the unit can detects existence of humans inthe room Ifthe unit keep detecting no human activity for 30 min it will automatically enters standby monitor status in order to save electricity And the unit will automatically start and resume operation if sensing human activity again FAN Button Press tis button to select the fan speed Kaas LOW MED HIGH A EE BUTTONS 00O 68 0O00 e Q TURBOISILENCE Button e Active Disable TURBO function for each press e Turbo function enables the unit to reach the preset temperature at cooling or heating operation in the shortest time if the indoor unit does not support this function there is no corresponding operation happened when pressing this button e Press the button more than 2 seconds the SILENCE function will be activated press it more than 2 seconds again to disable s When silence function is activated the compressor will operate at low frequency and the indoor unit will bring faint breeze which will reduce the noise to the lowest level and create a quiet and comfortable room for you Due to low frequency operation of compressor it may result in insufficient cooling and
Download Pdf Manuals
Related Search