Home

ProfiMAP - Software Manual 65778-C (12.99)

1. Record Variable EA 5 El RowN Parameter Name _ _Unit Comment Name recorder Jo Station No FF 0x0 0x40 OxFF Device Number 123 0x0 0x7FF Item Meaning Shortcut LOD Variable Display the index of the current record read only Index Number of Display the number of defined structures read only defined structures Choose Structure Select a structure defined in the Data Type Structure List Index Dialog by index Parameterize Enable the record sheet Record oK Leave this dialog and save all data from this dialog in the current project UY v 5 D ES e Cancel Leave this dialog without saving any changes in the current project Clear Clear all data from this dialog and set the record object to a null object MELSEC ProfiMap Software Manual Software Manual Profibus FMS Interface 6 37 LOD Variable Index This value represents the index of the current record object read only Number of defined structures This value represents the number of defined structures read only Choose Structure Index This list box contains the indexes of all defined structure types OK Click on 8K to leave this dialog and save all data from this dialog in the current project Cancel Click on Eme to leave this dialog without saving any changes in the current project Clear Click on tea to clear all data from this dialog and set the current re
2. ma Network Configuration x r CLIMA 1 slave s installed 60 are possible 140 Memory Usage 0 0 max 960 960 words DP Network Layout Zoom PB92D Mode E CS h FXON 32NT DP Qa a vi gt 2 u O T Qa A device is deleted by selecting it and activating the Delete DP Slave command in the context menu right mouse button or pressing the 2J key To modify the settings of a device you can right click on it and select the Modify Settings command from the context menu or double click on the device bitmap MELSEC ProfiMap Software Manual Software Manual Profibus DP Interface 5 23 Insert DP Slave Delete DP Slave Modify Settings Select Modules User Parameters This opens the Slave Parameter Settings dialog if the mouse pointer is placed on a slave station If it is currently placed on the master station the Master Settings dialog pops up see MASTER PARAMETER for further details You can as well double click on either the master any slave or the RS485 line to modify either the master settings the slave parameter settings or the bus parameters The Select Modules and User Parameters dialogs can also be accessed from the context menu Network Configuration Lx 4 slave s installed 60 are possible 1 0 Memory Usage 2 112 max 960 960 words DP Network Layout Zoom PB92D Mode E a le DS Slave_Nr_002 siave_Nr_004
3. If you select Hema or press Ed the previous setting before opening this dialog box is still valid and this dialog box will be closed If you click on the Moes button the default values will be loaded see table above The last Entry No having an AEname which is not empty will be deleted after pressing _ Dette Note The Entry No called Local has to remain it cannot be deleted If the button Hak or Exe is pressed then the modified values will be updated and this dialog box will be closed and thange open the same dialog box If you select you can define new parameters The Append function reaches the first Entry No which is empty If the default values are loaded the first Entry No is Remote 1 MELSEC ProfiMap MAP 3 0 4 8 802 3 MAP3 0 Interface MELSEC ProfiMap If you select tame you can modify a parameter set which has already been defined If you have selected AEname Local the following dialog box will be displayed AEname MELSEC_A APtitle 399937 0 s is AEgualifier poon PSAP fot SSAP fot ISAP por NSAPaddress 48 00 01 0200 00 00020 While this dialog box is open all buttons in the dialog box SAP AE Parameter Setting cannot be accessed When you select the tana button or press the E key the previous setting before opening this dialog box is still valid and this dialog box will be closed This
4. on BUTTER Now you can decide if you want to clear the error buffer once Press the Beatener Bure button and the software will force the AJ71M56EF2 to clear the error buffer of the module Software Manual MELSEC ProfiMap MAP 3 0 4 18 802 3 MAP3 0 Interface If the serial communication fails the following message will be displayed Communication Error x In this case please check the transmission cable and the correct settings of the serial interface Then try the error status function again Button Software Version The purpose of this function is to read the current software releases of AJ71M56EF2 The following dialog box appears Software Version Monitor If you select tare or press the 3 key this dialog box will be closed Afterwards the dialog box Monitor Selection will be active MELSEC ProfiMap Software Manual Software Manual 802 3 MAP3 0 Interface 4 19 When you click St or press the key the connected AJ71M56EF2 will be asked for the software version currently installed The result will be displayed as follows Software Version Monitor BOOT ROM 802 3 MAP 1st row Version of the ProfiBus communication software 2nd row Version of the boot ROM that manages the operation of AJ71M56EF2 3rd row Module name in column Software Type Ath row Protocol type in column Software Type If the serial communication fails the following mes
5. 2 steps through aK gt Cancel gt Entry sheet Lar s activates the entry sheet at once Activate the entry sheet Press to delete the 0 from the row No of Elements and enter a number from 1 10 Press 4 to confirm your entry and to step downwards to the first data type selection Press to open the listbox and select the desired data type with 4J and 1 Confirm with Exe Proceed with 3 until all structure elements are defined Once the entry sheet is activated J and Sat serve as toggle keys Press and release L to toggle to the OD index selection mode steps through the current OD indexes to edit Press and release St to toggle the direction of J index up index down Press and release L to toggle back to the regular mode a 2 steps through LK gt Cal gt Entry sheet Note A new defined structure provides the comment unreferenced Once the structure is used to define a Record variable its comment is changed to referenced and the structure cannot be undefined OK Click on 8K to leave this dialog and save all data from this dialog in the current project Cancel Click on tare to leave this dialog without saving any changes in the current project Undefine Click on Wsie to delete the current structure type This is only possible if the comment of the structure states unreferenced Software Manual Profibus FMS Interface 6 3
6. The following message box appears About ProfiMap MELSEC ProfiMap Menus 3 30 The Menus MELSEC ProfiMap Software Manual 802 3 MAP3 0 Interface 4 1 802 3 MAP3 0 Interface Software Manual Parameter Setting for AJ71M56EF2 Introduction and Overview This chapter describes how to generate the AJ71M56EF2 parameter settings After selecting the command New in the File menu see chapter 3 for details choose the module type 802 3 MAP AJ71M56EF2 from the menu Select Module Type MELSEC Device 802 3 MAP 4 71 M56EF2 The project dialog box shown below for the network setup appears It is subdivided into two sections one for the offline configuration and one for the online access of the module The following functions are provided Config Module OSI Parameter SAP AE Parameter Named Variable Access Module Monitor Read from AJ71 Write to AJ71 Verify MELSEC ProfiMap 4 2 802 3 MAP3 0 Interface E untitled MAP3 The parameter for this network interface module are grouped into three different items as follows OSI Parameter Setup of layer 3 and 4 parameter of the OSI model This function is used to define a watch dog timer which checks whether a connection is still active In addition there are timer settings which are important in case of communication errors SAP AE Parameter Setup of layer 7 parameter of the OSI model This
7. Station No of QE74 SF Oe Ox Port Number PC side 1024 o a b c d Network No PC Side 020 OOF Station No PC Side d3 tO AEN Network Settings MELSEC ProfiMap Software Manual Software Manual Item Network Database 7 9 Meaning Range Target Network No Specify the MELSECNET 10 target network number 0 none local 0x0 0x1 OXFF Target Station No Specify the target station number within MELSECNET 10 FF none local 0x1 0x40 OxFF Station No of QE71 Specify the station number of the QE71 Ethernet module the ProfiMap PC is connected to Melsec Medoc plus programming via instruction required 0x0 0x1 0x40 Target CPU Type Select the target CPU type Select from drop down list Port Number PC Side Specify the IP port of the Ethernet board 256 65535 IP Address of Q E71 Specify the IP address of the Ethernet board a b c d Time Out Specify the communication time out value for the network connection 6000 100000 ms Network No PC Side Specify the MELSECNET 10 network number the PC is connected to virtual MELSECNET 10 0x1 OXFF Station No PC Side Specify the MELSECNET 10 station number the PC is connected to virtual MELSECNET 10 The Target CPU Type can be selected from a drop down list 0x1 0x40 MELSEC ProfiMap ea a p e 3 aw Y Z 7
8. e nteger octet string O FFF O FFF data length 2 1 Array nteger O FFF array elements 1 Simp e nteger octet string 0 8191 0 8191 data length 2 Array nteger 0 8191 array elements 1 Simp e nteger octet string 0 2047 0 2047 data length 2 Array nteger O 2047 array elements Simp e nteger octet string 0 1023 1023 data length 2 Array nteger 1023 array elements Simp e nteger octet string Array nteger 1 1 data length 2 1 array elements 1 Simp e nteger octet string 6 Array nteger Q O Q 0 Q Q O 0 6 data length 2 6 array elements 1 A Note Do not use Array elements for the existing version of AJ71M56EF2 Software Manual MELSEC ProfiMap MAP 3 0 4 14 802 3 MAP3 0 Interface MELSEC ProfiMap Example Ni oh Arey elements Ni Gf If the message box of the checking operation is open all buttons in the dialog box Named Variable Setting cannot be accessed Select Mok or press in the message box to close it The dialog box Named Variable Setting remains open and you can enter a new value The purpose of this procedure is that you can correct all ranges until no more errors remai
9. 7 6 Network Database MELSEC ProfiMap Network properties for the CPU port connection Network DB QnA4 CPU CPU port connection via RS 422 Network Connection No 1 Network Connection No 1 ooo x Down ra P Target Network No fo 0x0 0x1 OFF AEN Network Settings Item Meaning Range Target Network No Specify the MELSECNET 10 target network number 0 none local 0x0 0x1 OxFF Target Station No Specify the target station number within MELSECNET 10 FF none local 0x0 0x40 OxFF Target CPU Type Select the target CPU type Select from drop down list Serial Port Number Select the serial port number of your PC connected to the CPU COM 1 COM 10 Serial Baud Rate Select the serial baud rate for the connection between PC and PLC 9600 19200 38400 bps Time Out Specify the communication time out value for the serial connection 6000 100000 ms The values for the Target CPU Type Serial Port Number and Serial Baud Rate can be selected from drop down lists Software Manual Software Manual Network Database 7 7 Defining an Ethernet connection Select a network connection index to be defined either by symbolic name or by number The default names of undefined network connections are Network Connection No x Network Connection No 2 Newer rein Ne Network Connection No 4 Network
10. Click on 8K to leave this dialog and save all data from this dialog in the current project Cancel Click on sea to leave this dialog without saving any changes in the current project After you confirm your CREF selection with a the following dialog will be displayed Software Manual Software Manual Profibus FMS Interface 6 39 Remote OD Set Via this dialog you reselect the chosen CREF get the remote OD and display the remote object dictionary You can only display the object dictionary of the other stations if the Get OD see below was successful Remote OD Set Lx Remote OD Access Selection CREF Nr Select CREF p Display OD _Salect AEF Item Meaning Shortcut Get OD Set the index to get start the remote data transfer Par J aj Display OD Display the remote object dictionary Car f D Select CREF Set the CREF for remote OD download Can JEJ Cancel Leave this dialog without saving any changes in the current E so project Get OD Click on R to set the index range of the remote objects you want to get Display OD Click on a to show the downloaded remote object dictionary You can only display a loaded remote object dictionary Select CREF Select a CREF from this list box for the communication with the remote station To obtain a valid CREF for the data transfer with the remote station please use the monitor function Check CREF
11. A 15 171PB92D E a ee The following dialog appears where you select the operation mode of your PROFIBUS DP master module The Profibus DP A 1S J71PB92D modules support an advanced buffer memory management in 244 byte mode with larger and more flexible data telegrams and thus less delay in the sequence program The 32 byte mode is provided for compatibility reasons with the MELSEC ProfiMap V 1 0 software and with the previous A1SJ71PB92D modules MELSEC ProfiMap a a v 5 D g a a v 5 D 9 5 2 Profibus DP Interface MELSEC ProfiMap The dialog box shown below for the network setup appears It is subdivided into two sections one for the offline configuration and one for the online access of the module The following functions are provided Config Module Device Database Master Parameter Define I O Slaves Access Module Check Unit Start DP Stop DP Write to A 1S J71 Verify If one setting dialog box is open e g Master Parameter the other buttons in the dialog box Config Module can not be accessed Software Manual Software Manual Profibus DP Interface 5 3 The functions that can be invoked within this network setup dialog are listed below and will be described in detail in the following Item Purpose Shortcut Device Database The device database contains information about slave devices from Mitsubishi or 3rd party manufacturers
12. Aom This graphical editor allows you to select those slave stations from the device database which are attached to the master and to modify their settings The settings of the master and the other devices can be changed by double clicking on the according icon Double click on the PROFIBUS connecting line to edit the bus parameters Double click on the ProfiMap PC to edit the connection to the master station Move your mouse cursor on any item to obtain information on it When you click on the Define I O Slaves button a symbolic graphical display of the network comes up which contains only the master station and the ProfiMap PC with the currently selected connection to the master station Network Configuration x O slave s installed 60 are possible 1 0 Memory Usage O 0 max 960 960 words DP Network Layout Zoom PB92D Mode E a Max is MELSEC ProfiCab to PB92D Norm a O a m 3 2 Min 2 m pes Cancel Create POU Within this window you can edit and add additional devices For this purpose the current window is devided into hidden squares When you click on the window a square appears and you can add a new device Software Manual MELSEC ProfiMap Qa a vi 5 2 u fe T a 5 16 Profibus DP Interface MELSEC ProfiMap Pressing the right mouse button calls up a context menu with the commands Insert DP Slave Delete DP Slave and Modify Settings Selecti
13. The addresses and phone numbers are provided on the back covers of all our manuals Software Manual MELSEC ProfiMap 1 2 Introduction Typographic conventions and other hints Menu names menu commands submenu commands and dialog box options are printed in boldface type Buttons are generally presented in the same way as they appear in the window e g OK Cancel c Ly v gt D O 5 These two symbols are used to identify the separate instructions for mouse and keyboard users Ol Examples This symbol identifies examples Note This symbol draws your attention to notes hints and valuable or useful information WARNING Always pay particular attention to the warnings marked with this symbol Failure to follow these instructions may lead to data loss damage to your hardware or other serious problems ES gt bh MELSEC ProfiMap Software Manual Installation 2 1 Installation Before You Begin Software Purpose This software is a configuration utility software package which will be used to configure network interface modules of MELSEC A series PLC such as Mm PROFIBUS DP interface A 1S J71PB92D mM PROFIBUS FMS interface A 1S J71PB96F E 803 3 MAP interface AJ71M56EF1 2 Cc e D L D a amp General Features This software package has the following features Editor windows Network parameter checking functions Download Upload Verify possibilities to the network modules M
14. The individual items in the Master Settings dialog are listed in the table below and commented in the following Parameter Meaning Shortcut Name Project specific name of the master device aij Baud rate Used to select a supported baud rate 9 60 Kbps 1 500 Mbps A FDL Address Set the local station number address of 0 126 a o the A 15 J71PB96F Qu Module Priority Set the module priority of the master high low device within the network Laja OK Leave this dialog and save the data in the project Eno Cancel Leave this dialog without saving the E changes in the project Default Overwrite the data in the dialog with default values Cas JE Bus Param Define the timing of the network lar JB Ya uv 2 ho fe a Software Manual MELSEC ProfiMap 6 4 Profibus FMS Interface Name The name is only shown in the project It will not be transferred to the master device The name only is of symbolic character in order to assist you in managing your different projects Baud rate The purpose of this item is to determine the timing of the network Since the network can operate at different baud rates the operator has to select the appropriate baud rate from the displayed values master specific The maximum baud rate supported by the A 1S J71PB96F unit is 1 5 MB The baud rate within a PROFIBUS network must be uniform FDL address The operator may
15. The purpose of this function is to add or delete devices from the internal database of available devices The software is distributed with a predefined list of groups which provide a general structure for all added slave devices The Device Database can be modified in the following dialog box GSD Device Database 15 GSD devices Genet E When a group is selected in the box Slave Device Group the model names of the devices belonging to the selected group are displayed in the lower list box Available Slave Systems Upon selecting a device entry in this list box the bitmap which has been assigned to the device is displayed on the right side of the list box Additionally both vendor name and revision string are displayed as well as the name of the GSD file and the bitmap file The so called GSD file describes the features of the slave such as the supported baud rate and the slave structure modular slave compact slave The displayed vendor name and revision are included in the GSD file as well Please ask the manufacturer of the slave device for the proper GSD file Software Manual Profibus DP Interface 5 5 GSD Device Database 15 GSD devices xi Note Only DP slave devices are visible within this dialog sorted by group vendor and model name Slave Device Group Vendor Mitsubishi Electric a Available Slave Systems 5 Revision Bitmap FX2N modular station AJSSTB2 16T
16. This item is used to add or delete devices from the internal database so called GSD files from PROFIBUS DP slave devices and to import export extracted GSD data Caio Master Parameter This item is used to set the bus parameter and all main parameters for the master in the Profibus network I Define 1 O Slaves This item is used to configure the Profibus DP network All network devices can be selected and configured Gio Check Unit This item is used to check the master for its slot number head address ident string firmware revision and operating mode Function available for network connections only A network connection can be selected in the master settings Start DP This item starts DP data transfer for the master Function available for network connections only A network connection can be selected in the master settings Stop DP This item stops DP data transfer for the master Function available for network connections only A network connection can be selected in the master settings Co Write to A1 SJ 71 This item uploads the module configuration from the current project into the module agg Verify This item checks the current project against the module configuration online ogy MELSEC ProfiMap a ay vi 5 2 U fe T a a a v 5 D 9 5 4 Profibus DP Interface MELSEC ProfiMap Button Device Database
17. You have to select the modules and to add them to the installed area The slot number they are added to is shown beside the installed modules MELSEC ProfiMap automatically determines the maximum possible number of modules per slave the maximum allowed length of the data telegram depending on the installed modules and the maximum user parameter data size It also calculates the number of I O bytes used by the modules you install and user parameter bytes thus preventing you from exceeding the supported length of telegram a a v 5 Ta g If you have created a new Profbus DP project with a 32 byte array operation mode 0 it is not allowed to have more than 32 input bytes plus 32 output bytes In case you exceed the maximum telegram length MELSEC ProfiMap will ask you to reduce the amount of installed modules Software Manual MELSEC ProfiMap 5 22 Profibus DP Interface After cklicking the Slave Parameter Settings dialog appears again Note After having made all settings in the Slave Modules windows you have to A define the start address in the CPU memory in the dialog box Slave Parameter Settings DP Network Layout When the device configuration has been entered click and the bitmap for that model is inserted into the graphical network layout The bitmap of the installed slave device is shown in the window In addition the name and the FDL address defined in the Slave Parameter Setting dialog is stated
18. a Bwep1742 98d an E30 pbdp gsd sa E70 pbdp gsd a E71 phdp gsd a 71ph96f gsd Mela7513 gsd le Melct032 9sd ss Mtt 21037 gs la Murr_mbm gsd File name gsd sa Mws_7001 gsd sa Ph921032 gsd sa Ph921244 gsd Phm_1002 9sd a Sie_801a 9sd Tiox1344 gsd Tiox1354 9sd Files of type GSD File gsd Cancel a Tiox3344 c vi02fh09 c sa vi02f13 c Vi03thO9 c Vi03tb13 c Vi10113c c Vil OfbSe c a When both GSD and bitmap file have been selected you will be asked to confirm the operation MELSEC ProfiMap 2 Add this GSD file to database Carcel If you confirm both files are copied to the internal directories for GSD and bitmap files An entry is added to the internal device database for that device Software Manual Software Manual Profibus DP Interface 5 7 Importing GSD Extract Files The GSD Extract feature allows the transfer of the entire device information of one project from one personal computer to another without passing on each single GSD file for any parameterized devices Click on Mims to load any existing GSD extract file or a complete GSD database file Look in E asd e le sl Files of type GSD Extract File ext Ena Creating GSD Extract Files In order to create a EXT file containing all device information for the current project check the Export GSD Data
19. g Software Manual MELSEC ProfiMap Qa ay vi 5 2 u fe T a MELSEC ProfiMap 5 10 Profibus DP Interface You can define the following parameters Communications parameters of Master Settings Parameter Range Meaning I O Mode O or Toggles the operation mode O 32 Byte E 244 Byte Name States that the A 1S J71PB92D is a master Baud Rate 9 6 kbps 12 000 Mbps Transfer rate for the communication Define a baud rate that is supported by all slaves FDL address 0 125 FDL address station number Head address 0 3F Module head address on the base unit Get HA Get the head address of the installed master module function available for network connections only Error action flag Output processing after failure Type G or click on the white square if you want to have the outputs shut off in case of error occurence recommended for drives inverters etc In practice this means After occurrence of any network error all outputs of the network are turned OFF Download Selection Uses a network connection to the master module for the download of the configuration data Toggles Select Port Select Network button Note f you change the baud rate power off the slaves Otherwise the slaves cannot synchronize with the newly defined baud rate Timing parameters of Master Settings Parameter Range Mea
20. selected special function module has to be multiplied by two and set into the buffer memory byte selection Buffer Memory Byte Buffer memory of special function module x 2 Memory Capacity For Memory Capacity MELSEC ProfiMap automatically determines the variable correctly Device Name The device name is a symbolic name for the device at the PLC The device name is in conjunction with the data type Software Manual Software Manual Profibus FMS Interface 6 35 Device Number The device number is the offset of the device at the PLC OK Click on a to leave this dialog and save all data from this dialog in the current project Cancel Click on Gane to leave this dialog without saving any changes in the current project Clear Click on tea to clear all data from this dialog and set the current variable to a null object The cleared variable serves as dummy object in the current index of the object dictionary to keep the numbering of the remaining objects MELSEC ProfiMap Y w v D O e E 6 36 Profibus FMS Interface Record Variable Click on Append to access the Record Variable dialog where you define record variables in the static object dictionary As standard no record objects are defined One record stays in conjunction with one structure type defined in the Data Type Structure List dialog For further information refer to the Profibus Specification EN50170 volume 2 page 190
21. 10 Network Database Structural overview of the Ethernet connection PC ProfiMap 3 0 77777 virtual MELSECNET 10 MELSECNET 10 network Station No PC Side a Network No PC Side real existing MELSECNET 10 network number 1 I I Station No QE71 QnA CPU MELSECNET 10 ETHERNET QE71 Station No IP Adress Target Network No QnA CPU Target MELSECNET 10 dea CPU type Target Station No Ethernet communications FB init FB connect must be executed in the CPU The settings must correspond to the FB_GPRSET instruction fea a _ O 3 Y Z MELSEC ProfiMap Software Manual Network Database 7 11 Network connection test The network connection settings can be tested online Click on the Mis button in the network database dialog to run the test the test function is available for network connections only A network connection can be selected from the network database or in the master settings The Connection Test dialog appears Connection Test QnA CPU x Press Button to start Search PB92D unit s Check for QE71 unit s IP Address of QE71 a b c d You can either search for available PB92D ProfiBus master modules or check for available QE71 Ethernet modules The Check for QE71 unit s function is only available for CPU port connections Search PB92D unit s This function will return the slot number and I O
22. 1600 A4JSSTB3 16D 16 DI AJ95TB32 16DT 8 DI 8D0 GSD DDB File Mtl 2f037 gsd Bitmap File Mt 2t037 bmp add Delete Leave Adding devices A slave device can be added to the database by pressing sa A standard Open File dialog appears so the GSD file can be selected Each added GSD file is automatically checked for its data integrity When leaving the Open dialog with aT the user will be asked for some bitmap files optional Then the GSD device data is saved in the local GSD device database The GSD file itself is no longer required If the GSD file itself refers to a drawing picture of the slave device MELSEC ProfiMap searches automatically for the file In case that the file is not found another Open File dialog is displayed so the user can select the bitmap file which he wants to be linked to the GSD file representing the corresponding device The bitmap file can be supplied by the user from disk It can be a bitmap file of the data type BMP or DIB However the Profibus DP standard recommends to provide a bitmap file for the dedicated slave device with the following restrictions Bitmap Width 70 pixels Hight 40 pixels a e uv 2 U 9 E Colors 16 File extension DIB Only bitmaps that match the requirements in the table above can be used Software Manual MELSEC ProfiMap a a vi 5 2 u fe T ro 5 6 Profibus DP Interface MELSEC ProfiMap
23. 2 o 2 2 Recommended enhancements 1 2 2 a 2 2 Software requirements 2 doe e 2 2 COPYMONE 2s 4 2 tre bed od ok ee be RE eb OM 4 bea eS 2 2 Software installation se 2 244 22 0 a RE OR ee a 2 3 MELSEC ProfiMap software setup 2 e 2 3 Installing MELSEC ProfiMap on your harddisk 24 2 3 Button PUNTOS e ac ane adem peak Gog wats ds dite ds ee ee a 2 4 The Menus 22k sc eee eee dee eee eee eee ee 3 1 Starting MELSEC PrONUMAD ic ica dad tok ae cts me dient Seige BOR ey ee ed 3 1 Menu after Start a c soa doros o 3 1 Peme a wes e Se bee hee ew eee eG bale Se PE eS 3 3 Command New is ti de ie i iH ee Ale die oP te we dd ee A a 3 4 Command Open tractor he SE ee ed ae a 3 14 Command SAVE acid a we ein E Be as Heid oa Go Aha agen dues 3 15 Command SAVE AS a oe y roer bg be OS oP ban See a ke bo 3 15 Command ASCll Import osot aa e e e a a a e e a a 3 16 Command ASCII EXPO ose a ea aie koe aa e a a 3 18 Command PANE sss aoe tick orea deta ia k E e a eh ire ded 3 20 Command Printer Setup e 0 0 o 3 20 Command Page Setup a s soe ro tosa Ep k e a 3 21 MELSEC ProfiMap Il Contents Chapter 4 Chapter 5 MELSEC ProfiMap Project Selecto cbr Bes des on eh nde wt Ae ean de Mee we Gale Roe day Oh Ik 3 21 COMMA EXI o gt een ao eke He ee a GAS a Se a sa 4 3 22 SetupIMeNU 24 es wee a ARES PEE ee Re we es 3 23 Command Serial Port Selection 2 2 0 3 24 Command M
24. Connection No 5 If you have selected an undefined index the Beine button becomes active Click on the Bane button Select the MELSEC unit your PC is connected to You can either access the PLC via the CPU port with a special serial programming cable or via an Ethernet board Below the Ethernet connection is selected Unit Selection QE71 On Ethemet board x Qn4 CPU RS 422 CPU port DE71 Un Ethernet board A CPU RS 422 CPU port Select the MELSEC network across which the host CPU of the PROFIBUS master module can be accessed The PROFIBUS master module can either be installed together with the target CPU on the same rack or on a remote CPU rack accessible across MELSECNET 10 Below the local installation is selected Network Selection ction connect via QE71 QnA Ethernet et board lt lt None local CPU is the PB92D aa PE al CPL is the MELSECNET 10 PB92D is in remote CPU Rack er CPU Rack LK _ Coca The Ethernet network connection is defined using default values Now you can edit the values directly in the network properties table Network DB MELSEC ProfiMap Network DB 7 8 Network Database Network properties for the Ethernet connection Network DB QE71 QnA Ethernet connection via UDP IP Network Connection No 2 Network Connection No 2 ooo Down ca Target Network No ft 0x0 Ox OxFF Target Station No 4 FO x10 0 OFF
25. Numbers L will be calculated based on the settings currently made in this dialog box For this purpose the following formulars are valid a 2xNxW a L N 1 xTI m R 2xTI R You can select an entry box by clicking on it or using the shortcuts and or the J key If you select SKN or press Exe a range checking operation will be started If no errors are found the modified OSI Parameter values will be accepted and this dialog box will be closed The project dialog box will be active The range checking operation looks for entries which are out of range The following error message will be displayed MELSEC ProfiM ap Xx Value out of range Configuration Timer CT Press F1 to get help The setting ranges are as follows Item Configuration timer CT Redirection timer RT Max No of transmission N Local acknowledge time A I Local retransmission time TI Window time Software Manual 802 3 MAP3 0 Interface 4 5 Example MELSEC Profitap x If a message box of the checking operation is open the buttons aK Wyeast and Eoen in the dialog box OSI Parameter Setting cannot be accessed Select Hok or press in the message box to close it The dialog box OSI Parameter Setting remains open and you can enter a new value The purpose of this procedure is that you can correct all ranges until no more errors remain Select Mok or press after entering the n
26. Profibus FMS Interface Button Header The CRL Header is used to store general information for all CREF entries There is only one CRL Header with the index null for the CRL defined An extra feature is the selection of the FMA7 connection usage Click on Header to access the Header dialog CRL Header Settings Poll List SAP o 0 2 60 128 Ass Abt Cl 4096 10 msec FMA T Connection Usage Cancel Default Item Meaning Range Shortcut Poll List SAP Specifies the SAP containing the poll list of layer 0 2 60 128 two LJE Ass Abt CI Time interval for control of connection 0 4294967294 EA establishment release x 10 ms Ld FMA7 Enable disable FMA7 usage Enable disable Connection aju Usage Poll List SAP This item specifies the Local Service Access Point which contains the poll list of layer two Valid values are O 2 62 for SAP 128 for NIL and 255 if no Poll List SAP is used in the current CRL The SAP manages all slaves connected to this master Ass Abt CI This parameter contains the time interval for the control of the connection establishment Assemble and the connection release Abort The value is multiplied by 10 ms to obtain a time value Al Note This control interval must range within O 4294967294 Y w v D O _ E MELSEC ProfiMap Software Manual Software Manual Profibus FMS Interface 6 21 FMA7 Connection Usage Connec
27. a PLC it writes data to variables in another PLC A network interface must provide variables which can be accessed by other network nodes This means variables are server data The purpose of this function is to define variables for a specific network interface Other network interfaces can access these variables by calling the name of a variable If you select this function without having modified any variables before the default setting for variables will be loaded One network interface is able to store up to 100 variable definitions The default values are defined as follows Variable Data PLC PLC device MELSECNET name structure device start address access empty none none empty Host 255 5 5 55 empty none none empty Host 5 5 2 empty none none empty Host 2 empty none none empty Host 2 In the above table none means that none will be displayed in the dialog box Named Variable Setting Variable No If the item Named Variable is selected the following dialog box appears m List of MMS Variables No Name Software Manual Software Manual 802 3 MAP3 0 Interface 4 11 If the tarea button is selected or the E key is pressed the previous setting before opening this dialog box is still valid and this dialog box will be closed When you select Hoa or press Ete the modified values will be updated and this dialog box will be clos
28. address of installed PB92D ProfiBus master modules MELSEC ProfiMap Di The 1 PB92D unitis installed in slot 1 N lO Address ofthis module is 0x002 Search again for another PB92D unit Yes No Click on Yes to search for other PB92D units All further units will be displayed as well If no further unit is found the following message will appear ea a e 3 Db Z Software Manual MELSEC ProfiMap Network DB 7 12 Network Database MELSEC ProfiMap MELSEC ProfiMap Check for QE71 unit s This function is only available for CPU port connections This function will return the slot number and I O address of installed QE71 Ethernet modules MELSEC ProfiMap You can also check the UPD port and IP address of the corresponding module Click on Les to start checking MELSEC ProfiMap O y Software Manual Software Manual Network Database 7 13 This function is especially helpful to get the IP address of an Ethernet module needed to setup an Ethernet network connection The found IP address will be entered in the Connection Test dialog Connection Test QnA CPU MELSEC ProfiMap Network DB Network DB 7 14 Network Database MELSEC ProfiMap Changing the network symbolic name You can change the symbolic name of any network connection index Select the network connection index you want to change Network Connection No 1 No i
29. array of string data type is selected you need to define the number of elements of the string data AND you need to define the length of the string in units of bytes This means that even the length of a bit string is defined in units of bytes If the object type Simple Object is selected the variable length needs to be set for string data types only Al Note 128 gt Elements x Length Network No This parameter represents the network number of the MELSECNET 10 data link system for the current variable object For further information please refer to your module manual Station No This parameter represents the PLC number of the MELSECNET B II 10 data link system for the current variable object For further information please refer to your module manual Address Type This parameter selects the device memory or buffer memory for the current variable object A special case is the memory capacity The memory capacity is a special array variable If you select memory capacity all data will be overwritten Ya uv 2 Oo fe i a Software Manual MELSEC ProfiMap Ya uv ho fe _ Qa 6 34 Profibus FMS Interface MELSEC ProfiMap This parameter Address Type offers three different selections Selection Meaning Device Memory The defined PROFIBUS FMS variable is directly connected to PLC CPU devices such as X Y M D R Buffer Memory The defined PROFIBUS FMS variable is directly
30. destination click Browse and enter your desired drive and directory Software Manual MELSEC ProfiMap E D OS D Ya E 2 4 Installation lt Back Cancel MELSEC ProfiMap You can now choose between three types of setup options gt Typical default This selection installs MELSEC ProfiMap and the device data base for Profibus DP on your harddisk This is the recommended option gt Compact This selection installs MELSEC ProfiMap without device data base for Profibus DP on your hard disk This option is especially suitable if you intend to use this software for the setup of 803 3 MAP 3 0 or either only for MMS or FMS gt Custom With this selection you can decide yourself After having made your decision click Next gt again Depending on your Windows version you can select the program folder which you want to have installed Enter a new folder name or accept the displayed one and click on Next gt At last you will see an overview of the current settings You can accept the settings and start the installation with Next gt The installation will start Decompressing Files In CAProfiMap profimap exe After the installation was successfully finished you will see an appropriate message Please refer to the file CONTENTS TXT in the root directory of the installation CD ROM for further details on its contents The MELSEC EasySocket software is required for network connections to t
31. e a d a a e ae a a A aa a u eaaa e a A A a a 5 26 SOPA o eit e e ee te ee ey ae ee egg ee ae Sea a te E 5 27 Write to AJZ1 0 000000 00000000000 2 a a T a EON a 5 28 VERIS 2 2 oe rd ete ee eee AS oe ee Bo ee 5 30 Software Manual Chapter 6 Chapter 7 Software Manual Contents III Profibus FMS Interface o 0 0002 eee 6 1 Parameter Setting for A 1S J71PB96F 0 2 0000 000 4 6 1 Introduction and Overview 2 6 1 Button Param Settings 2 4 a 6 3 Calculation of the Target Rotation Time TTR 0 0 6 6 Button CRL Settings Communications Reference List 6 7 Editing an PMS CRL Entry e c oeio a ey ek Oe A Rd 6 10 Button Client Features 0 0 eo 6 16 Button Server Features s s e s 22 haw ew A he a ee 6 18 Button Header 2s tse sa hae Ree Bae ele ae ew eR ee 6 20 Button CRL Check 2 oca rl Be a a E 6 22 VFD Local Object Dictionary 2 ee 6 24 Data Type Structure ist bs se sird ma a doao aa e dob ag 6 27 VFD Variable Setting s so sisas issada tesuda Krea 6 31 Record Variables lt s a pisane a a Ge eek ad A Ee A 6 36 Remote Mode s sa sad Paes eee ee eea A o 6 38 Remote OD Set op ss niyned iant sapoe ee ee lenit 6 39 Remote OD Index isch Bae Se ee ee PR ee 6 40 Remote OD Display sc 4 ak Se eR ye ek Co ee ee Re 6 42 Monitor Selection o esrar cearr iaria 6 44 Software Version MOnItor s as aaa o 6 45 Initial Check Mo
32. host no network connection Combination of AnU and QnA S CPUs in a network m f ProfiMap is connected to a QnA S station in a MELSECNET 10 network the QnA S CPU must be switched to A mode by hardware switch if transfer to an Anu is required m f QnA S CPUs are existing in a MELSECNET 10 network a QnA S CPU must be the control station m f QnA S and AnU CPUs are existing in a MELSECNET 10 a QnA S CPU must be the control station The AnU CPU can only be accessed from a QnA S CPU with hardware switch in A mode fea a _ e 3 D Y Z Software Manual MELSEC ProfiMap 7 2 Network Database Supported connection types PC ProfiMap to PLC a COM port to QnA CPU RS422 CPU port m Ethernet board to QE71 QnA Ethernet module a COM port to A CPU RS 422 CPU port only locally no network connection PLC to PLC a None local CPU is the PB92D host a MELSECNET 10 PB92D is located on remote CPU rack fea a _ O 3 Y Z MELSEC ProfiMap Software Manual Network Database 7 3 Database Handling Opening the network database El Click on the network database button in the toolbar or select Setup Network Database from the main menu to open the network database Network Database Ctrl D Serial Port Selection Ctrl E MxChange Support Ctrl M GSD Device Database Ctrl G Network database main dialog Network DB Undefined connection use Define button x Network Proper
33. individual entries new ones can be appended Simple amp rray Variable a Cancel Domain Object Note Before you can append an object of the type Record Variable you have to specify the values in the Data Type Structure List dialog The object type Domain is currently not implemented Delete Click on Bee to delete the current variable object If the selected variable object is not the last entry in the object dictionary it will be cleared This means the current object is set to a null object The purpose of null objects is to hold the index order Change Click on Grange to change and edit the object and device descriptions The object type cannot be changed from record to simple or array but only from simple object to array object and vice versa Detailed changes of a domain object read from the unit are not allowed Any variable object can be changed to a null object OK Click on a to leave this dialog and save all data from this dialog in the current project Cancel Click on Eme to leave this dialog without saving any changes in the current project Default Click on Defeat to reset all data within this dialog to default values Be careful all your changes made will be lost best does not set the structures to default values Software Manual Software Manual Profibus FMS Interface 6 27 Data Type Structure List The Data Type Structure List shows the definition of the static t
34. item defines logical connections to other network nodes Named Variables Setup of layer 7 parameter of the OSI model This item defines variables being server for other network nodes MAP 3 0 MELSEC ProfiMap Software Manual Software Manual 802 3 MAP3 0 Interface 4 3 Command OSI PARAMETER The purpose of this function is to define a watch dog timer which checks whether a connection is still active or not In addition there are timer settings which are important in case of communication errors If you select this function without having modified these values before the default values will be loaded The default values are defined as follows Item Default value Configuration timer CT 30 Redirection timer RT 60 Max No of transmission N 3 Local acknowledge time A 1 10 Local retransmission time TI 15 Window time 10 The OSI parameters can be modified in the following dialog box OSI Parameter Setting jo o Bo fio is io sua ESE sr a i You can use the Moe button to set the OSI Parameter entries to default values as defined in the previous table If you select caret or press the EJ key this dialog box will be closed without updating the OSI Parameter setting MELSEC ProfiMap MAP 3 0 4 4 802 3 MAP3 0 Interface MELSEC ProfiMap The timers a Inactivity Time 1 Persistence Time R Bound on ref amp Seq
35. name with a number 0 to 9 Otherwise you A will get an import error in MELSEC MEDOC plus since the file name is equal to the task and POU name which is generated MELSEC MEDOC plus does allow POU names which are beginning with a number MELSEC ProfiMap Software Manual Profibus DP Interface 5 25 Check Unit eki The master can be checked for its slot number head address ident string firmware revision and operating mode The check function is available for network connections only A network connection can be selected in the master settings The check function can be started from the main network setup dialog or from the master module context menu in the graphical network configuration layout The performed checks and returned messages are shown below The slot number where the master is installed and the head address MELSEC ProfiMap O The module ident string and firmware revision IMELSEC ProfiMap O The operating mode MELSEC ProfiMap a a v 5 D 9 The freeze function is determined in the Write to A 1S J71 dialog Software Manual MELSEC ProfiMap 5 26 Profibus DP Interface The final test result MELSEC ProfiMap O Start DP The PROFIBUS DP data transfer can be started or stopped manually This function is available for network connections only A network connection can be selected in the master settings MELSEC ProfiMap The P
36. object dictionary CREF Selection x available CRL Entries CREF No Symbol CREF No 02 Connection_01 y Software Manual The Menus 3 7 Button Monitor Depending on the network interface module different monitor functions are available AJ71M56EF2 If the network interface module AJ71M56EF2 has been selected the following dialog box appears Monitor Selection Es E E _triagheck Enostans _Softwareversin Statics A 1S J71PB96F If the network interface module A 1S J71PB96F has been selected the following dialog box appears Monitor Selection A 1S J71PB92D The network interface module A 1S J71PB92D does not support the monitor function Software Manual MELSEC ProfiMap Menus 3 8 The Menus Read Write Verify operations from to with the master module Before you start the transfer Ensure that no other data is transferred from or to the network module FROM TO instructions Ensure that the serial cable is connected correctly to your personal computer and to the network module Set the master module to the parameterize mode Reset the PLC CPU After the transfer is completed Set the master to the operating mode Reset the PLC CPU Button Read from A 1S J71 The purpose of this function is to upload the module configuration from the selected network interface module To start this function click on the Readtonasa button Only for an FMS project you can additional
37. parameter set becomes equal to Remote 1 of default parameters tea in this dialog box and Delete in the dialog box SAP AE Parameter Setting are similar With the Gear button you delete the Entry No currently selected If Local is loaded Clear has no function If you select the Ma button or press the key a range checking operation will be started If no error is found the dialog box SAP AE Parameter Setting will be closed and all modifications will be accepted The range checking operation stops after having found the first error A triangle shaped red pointer on the left side of the dialog box SAP AE Parameter Setting points on the error The range checking operation checks whether there is any entry out of range and whether the AEname is already used for another setting Software Manual Software Manual 802 3 MAP3 0 Interface 4 9 The following error message will be displayed MELSEC ProfiM ap x Value out of range AEname Press F1 to get help If the AEname has already been used at another setting there will be a special message The ranges are defined as follows Item Range AEname max 8 characters a previously registered AEname cannot be used APtitle String of ASCII character O 9 If more than 16 characters are set max every 16 characters must be devided by a comma AEqualifier String of ASCII characters O 9 max 8 charact
38. server cta Test Tests if a connection to the MXChange server can be oa established with the specified settings ET You can set the MXChange connection usage for the A 1S J71PB92D project by enabling the MXChange Connection Usage check box MELSEC ProfiMap Menus 3 26 The Menus MELSEC ProfiMap When the user prefers a local MXChange server it is compulsory to install the server on the local PC The local MXChange server is selected by enabling the Local MXChange Server check box For correct remote MXChange support it is compulsory to install the TCP IP services of the operating system The correct IP address of the remote station where the server is located can be set by disabling the Local MXChange Server check box The correct account subdivided by the User Name and Password is also compulsory for remote connection usage Command GSD Device Database The device database contains information about slave devices from Mitsubishi or 3rd party manufacturers This item is used to add or delete devices from the internal database so called GSD files from PROFIBUS DP slave devices and to import extracted GSD data from other computers running MELSEC ProfiMap The purpose of this function is to add or delete devices from the internal database of available devices The software is distributed with a predefined list of groups which provide a general structure for all added slave devices The Device Database can be modi
39. this dialog in the current project Cancel Leave this dialog without saving any changes in the current project Default Reset all data within this dialog to default values Be careful all your changes made will be lost Start Index The index logical address serves as a key to the object Before a remote station is able to access an object it must know the index The Start Index is the index of the FMS variable object Make sure that the index of an FMS variable is not overlapping with the index of a structure In this case the defined structure will be ignored but not deleted Structs Click on swa to access the Data Type Structure List dialog where you can define structures as a part of the static type dictionary List of FMS Variables This list box displays all defined variable objects By default the maximum number of variables is already defined Supported objects are simple array null and record objects Domain objects from older configurations can be read and written but not changed Ya vi 2 Oo fe i a Software Manual MELSEC ProfiMap Y w v D lt O _ E 6 26 Profibus FMS Interface MELSEC ProfiMap Append Click on end to append a new variable object to the local object dictionary and to access the Select Type of LOD Entry dialog As standard no new object can be appended because the maximum number of entries 128 is already set After deleting
40. where you can switch over to one of several projects that you keep open simultaneously Either click on the loaded project you want to switch over to or enter the according number Up to 8 projects can be opened at the same time MELSEC ProfiMap Menus 3 28 The Menus MELSEC ProfiMap Help menu Within the Help menu you can select between the following menu commands Index Using Help About MELSEC ProfiMap Command Purpose Shortcut Index Searching for keywords none Using Help Call Windows Using Help function none About MELSEC ProfiMap Display software release none Command Index With the help of this function you can search for a keyword Just type in the term you need information about and you will get help In addition you will be supported by a context sensitive help If you have opened any dialog box you can access the help function by pressing the EJ key Command Using Help The purpose of this function is to start the Windows help informing you on how to use the help system Software Manual Software Manual The Menus 3 29 Command About MELSEC ProfiMap EJ ProfiMap 3 0 Help ajs a About MELSEC Profik ap This function displays information about your software release Since MITSUBISHI ELECTRIC wants to include further network interface modules to this configuration software package it is possible to distinguish the software by its version number
41. 1 VFD Variable Setting MELSEC ProfiMap supports the following object types Null Object Simple Object Array Object Record Object Domain Object not changeable The variable setting dialog is the same for null simple and array objects Click on Grange to change edit the varible settings in the VFD Variable Setting dialog VFD Variable Setting LOD Index 50 No bugs only features Array Object Boolean El Y v 5 Ko Software Manual MELSEC ProfiMap 6 32 Profibus FMS Interface Item Meaning Shortcut Name The symbolic name of the variable object Lat Jin Object Type Set the null simple or array object cat Jo Data Type Set the data type of the current object cat Jo Elements Set the number of elements for an array object alt JEJ Length Set the length of the elements for data type string aji Network No Set the network number within the MELSECNET 10 alt jaj Station No Set the PLC number within the MELSECNET B II 10 Lat J s Address Type Select device or special function module buffer memory and 3 memory capacity Device Name Set the type of device used for object mapping Device Number Set the offset in the selected device address space OK Leave this dialog and save all data from this dialog in the current project Cancel Leave this dialog without saving any changes in the current project
42. 67 ms 23 333332 ms Setup Time T_set Target Rot Time T_tr GAP factor 1 100 HSA 126 2 126 Max retry limit 0 7 Cancel BEL Default General timing factors are displayed in recalculated form based on the selected baud rate and absolute time durations The conversion factors are the following Parameter Remark Meaning Range Software Manual Baud Rate Transfer rate see selection Must be supported by all slaves T_sl Slot time 1 65535 x t_bit Max Interval to wait for response min T_sdr Min Station delay of responder 0 65535 x t_bit max T_sdr Max Station delay of responder 0 65535 x t_bit T_qui Quiet time 0 255 x t_bit T 0 if no repeater present T_set Setup time 1 255 x t_bit T_tr Target rotation time 1 1048576 x t_bit GAP factor Controls the GAP update time T_gud 1 100 HSA When pressing the Default button all values are set to their default values especially Highest station address for the currently selected baud rate 2 126 MELSEC ProfiMap Qa a a vi 2 2 u fe T a Qa ay vi 5 2 u fe T a 5 12 Profibus DP Interface MELSEC ProfiMap Note f you change the baud rate of an existing PROFIBUS DP network power off the slaves Otherwise the slaves cannot synchronize with the newly defined baud rate The inputs a
43. Cancel Click on Eme to leave this dialog without saving any changes in the current project MELSEC ProfiMap Ya vi 2 ho fe i a 6 40 Profibus FMS Interface Remote OD Index Click on m to reselect the chosen CREF get the remote OD and display the remote object dictionary You can only display the remote object dictionary if the Get OD was successful Remote OD Index Item Meaning Shortcut Current Index Displays the current index of the remote object read only Static Types Displays the start end index of the remote static types read only Static Data Displays the start end index of the remote static objects Get Range Select the range of the types objects to get remotely Start Start the data transfer Get Header Download the header of the remote object dictionary to MELSEC ProfiMap Cancel Leave this dialog without saving any changes in the current project Get Header First click on em to download the header of the remote object dictionary If the download was successful you can edit the range or download the whole Remote Object Dictionary v v 5 D ES e MELSEC ProfiMap Software Manual Software Manual Profibus FMS Interface 6 41 Remote OD Index Current Index Displays the current index of the remote object which is in download process to MELSEC ProfiMap read only Static Types Displays the sta
44. Clear Clear all data from this dialog and set the current variable to a null object The cleared variable serves as dummy object in the current index of the object dictionary to keep the numbering of the remaining objects Name This item is the symbolic name of the current variable object The maximum length of the string is 32 ASCII characters Note f you use special characters for the Name generation be aware that the ASCII code of the currently used character set is downloaded to the A 1S J71PB96F PROFIBUS FMS master module This might cause problems to call the variable from another PROFIBUS FMS node Object Type The object type is used to define simple array and null variable objects When the operator selects the null object the variable will be cleared in the current index place marker of the index Y w v D lt O _ E MELSEC ProfiMap Software Manual Profibus FMS Interface 6 33 Data Type MELSEC ProfiMap supports the following data types for variable definitions Boolean Integer8 Integer16 Integer32 Unsigned8 Unsigned16 Unsigned32 Floating Point Visible Octet Bit String For further information on coding these data types refer to the Profibus Specification EN 50 170 volume 2 part six Elements In case the selected object type is an array object this parameter is changeable In this case it represents the number of elements of the selected array object In case an
45. Click on 8K to leave this dialog and save all data from this dialog in the current project Cancel Click on Eme to leave this dialog without saving any changes in the current project Default Click on ow to reset the entire CRL to default values All data from this dialog and subdialogs will be lost Be careful The data will be restored to the default values for the CRL Al Note The CRL Header is not affected by the Default button Y 2 w u D O e E Software Manual MELSEC ProfiMap UY v 5 D 2 e 6 10 Profibus FMS Interface MELSEC ProfiMap Editing an FMS CRL Entry Via this dialog you define individual communication references That is to set the connection attributes and the protocol attributes A special feature is a detailed editor for client and server features Click on to edit an exitsting CRL entry or on to append and edit a new CRL entry The FMS CRL Entry dialog box appears FMS CRL Entry CREF 02 MMAC E 10 open res Y 4096 Software Manual Item Meaning Profibus FMS Interface 6 11 Range Shortcut Symbol User definable name of the connection This is the unique name within the project 32 characters max cin Password FMS password protection for connections 0 255 agw Access Groups Defines relations of different groups of connections 0 255 Local LSAP Sets the local Serv
46. Configuration menu When the correct model is displayed you have to set the parameters listed in the following table When pressing the Fees button all values are set to their default values MELSEC ProfiMap a a v 5 D 9 Qa ay vi 5 2 u fe T a 5 18 Profibus DP Interface MELSEC ProfiMap Parameters in the Slave Parameter Settings have the following meaning Item Purpose Shortcut Name The name of the slave can be defined This is for documentation purpose only ay FDL_address This item is used to define the station address of the slave ayo Watchdog Click on the white box or type the shortcut if you want to use he watchdog timer for this device The check box enables the watch dog control of the slave The slave will check whether he master was in communication with the slave within the defined watchdog time If the watchdog time is exceeded the outputs are turned to the save state a Jw Watchdog time f you have selected the Watchdog function you must define he watchdog time interval of the slave Make sure that the data control time in the Master Parameter setting is 6 times longer than the slaves watchdog time min T_sdr This is the minimum waiting time for a DP slave until it is allowed to send response frames to the DP master Do not change this value Group identification number Profibus DP allows to transmit contr
47. ELSEC ProfiMap The MXChange button is only available if MXChange actually is installed on your computer 5 Print Setup fr Page Setup a Network Database pM Serial Port tis MXChange Starting a new project Opening an existing project Saving a modified project Printing the current project Opening the printer setup Defining the parameters to be printed Managing the records of the network database Select COM port 1 or 2 MXChange support properties GSD device database Getting context help Getting help on items you click on Displaying program information Gu 8 o 0 e is a E ox 0 ag E ox iu J j Software Manual Software Manual File menu The Menus 3 3 After having started the MELSEC ProfiMap software this is the first menu to work with With the help of this menu you can create a new project load an existing project import and export a project Setup View Window New Ctrl N Open Ctrl O Close Save Ctrl S Save As AS port ASH Export Print Ctrl P Print Setup Page Setup 1 sample fms 2 sample dp2 3 sample mms 4 test fms Exit The menu commands have the following functions Command Purpose Shortcut Hotkey New Starting a new project N oan Open Opening an existing project ojo Save Saving a modified project L s Save as Saving a modified project with a new na
48. El etwork Connection h E Network Connection No 2 Network Connection No 3 Network Connection No 4 El Enter the new name in the Change Network Symbolic Name entry field and confirm with ma CPU_pott local_host Network Connection No 1 ha The symbolic name for the network connection has changed and can be selected from the Search Network by Symbolic Name drop down list Network Connection No 2 Network Connection No 3 Network Connection No 4 Software Manual Software Manual Network Database 7 15 Clearing a network connection index You can clear any defined network connection index Select the network connection index to be cleared Network DB QnA CPU CPU port connection via RS 422 Network Connection No 1 t n No 1 ha Network Connection No 1 a Network Connection No 2 ca Network Connection No 3 Network Connection No 4 hd ca Target Network No fo ox Ot OXF Time Out inms 3000 OOOO AEN Network Settings Click on the tea button Confirm the following dialog with ies MELSEC ProfiM ap The network connection index is cleared to the undefined status MELSEC ProfiMap Network DB Network DB 7 16 Network Database MELSEC ProfiMap Network DB Undefined connection use Define button Network Connection No 1 Network Connection No 1 ha oo y AEN Network Settings Transferring the network database T
49. F2 use the red programming cable SCO9 m For the A 1S J71PB92D or A 1S J71PB96F use the blue ProfiCab cable Software Manual Software Manual The Menus 3 25 Command MXChange support MXChange is an external software package made by Mitsubishi Electric An A 1S J71PB92D PROFIBUS DP module project can use MXChange to generate a suitable PLC CPU sequence program at MELSEC MEDOC plus V 2 32 or later The PLC CPU program update is done automatically with saving the A 1S J71PB92D project For this purpose the MXChange server must be installed and MELSEC ProfiMap must be connected to this server This dialog is used to setup the MXChange connection MXChange Support Properties x MxChange Support Selection IZ MXChange Connection Usage M AF Orange o M Connect Parameters V Local MXChange Server Select Server Instance iF Adgress 127 i p p User Name Admin Password pre Item Meaning Shortcut MXChange Enable disable the MXChange function all Connection Usage Local MXChange Specifies that MXChange is installed locally on the same ow J Server system as MELSEC ProfiMap not in a LAN Select Server Selects one of up to 16 available servers to connect to cal Instance IP Address Specify the IP address of the MXChange server in the LAN ask your network administrator User Name Enter your user name for the MXChange server cin J Password Enter your password for the MXChange
50. Info ON Index MELSEC ProfiMap V3 0 Configuration System for Open Networks Software Manual EJ untitled DP1 ProfiMap 3 0 REO View Window Help Network Download Settings Ctrl D Serial Port Selection Ctrl E MxChange Support Ctrl M GSD Device Database Ctrl G Network Configuration 2 MITSUBISHI ELECTRIC ate GSD Database EXPO MELSEGHET Settnas 5 slave s installed 60 are possible 1 0 Memory Usage 6 6 max 960 960 words DP Network Layout 125 or untitied DP1 r Config Module Profibus DP A 1S J 71PB92D 122 Slave_Nr_002 Slave_Nr_005 Slav we_Nr_001 Zoom PB92D Mode E Slave_Nr_004 123 Slave_Nr_003 126 124 Ll Device Database Master Parameter Cancel Create POU MELSEC ProfiMap 3 0 Configuration System for Open Networks Software Manual About this Manual The texts and illustrations in this manual are provided exclusively as a guide to the open network configuration system MELSEC ProfiMap Separate manuals are available for MITSUBISHI ELECTRIC s various series of MELSEC programmable logic controllers The MELSEC ProfiMap software is supplied under a legal License Agreement and may only be used and copied subject to the terms of this License Agreement All rights reserved Without the prior explicit consent in writing fro
51. LMELSEC ProfiMap 3 0 1125 123 Max Slave_Nr_001 Slave_Nr_003 126 124 MELSEC ProfiMap a a a vi 2 2 U fe T a 5 24 Profibus DP Interface When the whole network creation is complete the project should be saved with the help of the File menu Note When you select Save instead of Save as the former saved project will be A overwritten Now you can transfer the whole configuration data to the connected Profibus master module with the Lwieeam button in the Network Setup menu for data transmission to the A 1S J71PB92D refer to chapter 3 The Tesero button opens a Save File As dialog where you select the name of the file in which a POU in ASCII format is generated for MELSEC MEDOC plus Save in lt a ProfiM200 J a elle E bmp 3 db gsd tmp Filename ERE Files of type ASC File asc Cancel After typing in a project name and clicking the button the file is saved to your selected drive POU means Program Organisation Unit and is installed for a MELSEC MEDOC plus program Basically the POU includes FROM TO instructions to access the buffer memory of the master module This POU must be included into the PLC program to have the I O data of each slave copied to the given address in CPU memory Qa a vi 5 2 u fe T a For further informations please refer to the MELSEC MEDOC plus Reference Manual Note t is not allowed to start the file
52. MS Interface OK Click on ok to leave this dialog start the transfer and verify all data with the module A successful verification will be confirmed by All settings verified Cancel Click on Eme to leave this dialog without verification of any settings Y w v D lt O _ E MELSEC ProfiMap Software Manual Network Database 7 1 Network Database Introduction ProfiMap is capable of downloading PROFIBUS DP configuration data to the PB92D master module via MELSEC Ethernet or MELSECNET 10 The master module can be configured via the CPU port of a local or remote MELSEC PLC or via an Ethernet connection to your personal computer PC Up to 1000 different network settings can be configured and stored in a network database From this database the suitable network connection for a ProfiMap project can be selected in the Master Settings dialog For successful network settings you should be familiar with the characteristics of MELSEC Ethernet and MELSECNET 10 and refer to the corresponding manuals Supported network configurations ProfiMap 3 00 supports MELSEC Ethernet and MELSECNET 10 connections with the following restrictions Restrictions No support for combined MELSECNET 10 and MELSECNET II systems No support for MELSECNET II MELSECNET B No support for MELSECNET 10 multi layer systems No support for MELSECNET 10 remote network systems Support for AnN AnA AnU CPU port access only as local
53. Master F CARL Information FP Structures Variables cancel Item Meaning Shortcut Master Bus Select the master and bus parameters to be read from the al Parameters module Lat Jiu CRL Information Select the whole CRL to be read from the module alt fc Structures Select the local OD to be read from the module Variables LJE OK Start the transfer from the module and save all transferred data in the current project Leave this dialog without saving any changes in the current project Master Bus Parameters This checkbox enables disables the upload of the master and bus parameters CRL Information This checkbox enables disables the upload of the entire communication reference list Structures Variables This checkbox enables disables the upload of the entire local object dictionary OK Click on ok to leave this dialog start the transfer and save all data read from the module in the current project Y w v D lt O _ E Cancel Click on Eme to leave this dialog without reading the project from the module MELSEC ProfiMap Software Manual Profibus FMS Interface 6 51 Write to A 1S J71PB96F Write to A 1S J71 Click on Meesi to select the data to be written to the module There are three selectable items Check any item to be written m Master Bus Parameters m CRL Information Structures Variables For a successful download t
54. PU reset To activate the freeze mode activate the respective checkbox when writing the configuration data To deactivate the freeze mode deactivate the respective checkbox and write the configuration data again The required mode for the data transfer is set automatically MELSEC ProfiMap The PB92D unit is currently in mode E ProfiMap will set mode 1 temporary This will also stop all DP data exchange Continue operation Yes No MELSEC ProfiMap Software Manual Profibus DP Interface 5 29 The operation mode was not freezed MELSEC ProfiMap O The configuration data was written successfully MELSEC ProfiMap O Communication errors Communication errors will be indicated by appropriate messages MELSEC ProfiM ap O a a a v 5 D 2 g Check the hardware configuration and network settings Then try to write to the AJ71 again Software Manual MELSEC ProfiMap 5 30 Profibus DP Interface Verify very This function compares the settings of the master to the configuration data in the ProfiMap project The contents of the master and the project must match after writing the configuration data MELSEC ProfiMap MELSEC ProfiMap The configuration data was verified successfully MELSEC ProfiMap O a a v 5 D 9 a MELSEC ProfiMap Software Manual Profibus FMS Interface 6 1 Profibus FMS Interface S
55. ROFIBUS DP data transfer has been started MELSEC ProfiMap O a a a v 5 D 2 g a MELSEC ProfiMap Software Manual Profibus DP Interface 5 27 Stop DP The PROFIBUS DP data transfer can be started or stopped manually This function is available for network connections only A network connection can be selected in the master settings MELSEC ProfiMap The PROFIBUS DP data transfer has been stopped IMELSEC ProfiMap CES O a a a v 5 D g Software Manual MELSEC ProfiMap Qa ay vi 5 2 u fe T a 5 28 Profibus DP Interface Write to AJ71 Write to AJ71 This function writes the configuration data to the master module Write parameters to A 15 J71PB92D via CPU Network Ea Operating Hints 1 Please make sure that during write no other data transfer is executed with the network module e g TO FROM instructions 2 Check that your network CPU cable Ethernet MELSECNET 10 is OK Mode while writing will be set Mode after write will be set automatically automatically If you selectthis the operating mode will be saved permanetly on PB92Ds EEPROM if not the FP Freeze mode independantly of a PLC reset units made is not save Start now write parameters to A 15 J71PB92D via selected CPD Network Cancel The freeze mode maintains the operating mode of the master even after a C
56. SEC NET address to Host Station OxFF automatically default If an MMS type project is selected up to 100 global variables may be imported MELSEC ProfiMap Menus 3 18 The Menus MELSEC ProfiMap If the number of global variables exceeds these 100 variables a message dialog box appears Warning Too many global variables Cannot import all of them If the import is finalized a message dialog box appears Import done XX global variables imported Command ASCII Export Note This menu command is not available for PROFIBUS network The ASCII export provides two features Export the named variable list to the global variable list which can be imported by MELSEC MEDOC plus Export the whole project to an ASCII file which can be read by an ASCII editor ASCII Export Ea Export to ASCII Project i Export Named Variables to MM Global Variables Cancel The purpose of exporting the named variable list to the global variable list which can be imported by MELSEC MEDOC plus is to avoid the generation of global variables twice This reduces your programming efforts The purpose of exporting the whole project to an ASCII file is that you have the possibility to include the generated parameter setting to other vendor configuration utilities Export to ASCII Project If you select Export to ASCII Project a dialog box for file saving operation appears and a name for the project can be defined
57. SEC ProfiMap Index ii MELSEC ProfiMap Software Manual 4 MITSUBISHI ELECTRIC Specifications subject to change Art No 65778 C a MITSUBISHI ELECTRIC EUROPE B V
58. The format of the ASCII export file is the same as for the menu command ASCII Import see page before Software Manual The Menus 3 19 Export Named Variables to MM Global Variables If you select Export Named Variables to MM Global Variables the export function transfers the following variable formats MAP 3 0 MMS IEC 1131 3 variable supported by Variable supported by AJ71M56EF2 MELSEC MEDOC plus Boolean BOOL ot possib Integer INT DINT ot possib WORD DWORD Octet String ot possible Bit String ot possible Array of Boolean Array of BOOL Array of Integer Array of INT If a named variable cannot be exported to a MELSEC MEDOC plus global variable a message dialog box appears Cannot export variable XYZ to MM global variables Software Manual MELSEC ProfiMap Menus 3 20 The Menus MELSEC ProfiMap Command Print The purpose of this menu command is to print the generated parameters of the selected network unit This window states the actual printers and offers to select the print quality If you want to use another printer you can select it from the Name item Command Printer Setup If you select the menu command Printer Setup the standard Windows dialog box for the printer setup appears Software Manual Software Manual The Menus 3 21 Command Page Setup When you choose Page Setup you can select which parameters will be prin
59. Windows dialog box for file open are valid Note DP projects generated with MELSEC ProfiMap V 1 0 cannot be opened Software Manual The Menus 3 15 Command Save This menu command is used to save a modified project The project will be saved to the assigned file name If no file name exists e g new project the standard dialog box for Save as will be opened In case of a A 1S J71PB92D there are two possibilities to save an existing project Saving only the project with the extension DP2 where Profibus DP network configuration is stored This is usually done Saving the project with the extension DP2 and an extract of the currently used GSD database File This extract contains all the attributs stored in the GSD database file of those slave devices which are used in the network The extract will have the same name as the project file but has the extension EXT In case that both files DP2 and EXT are stored on a floppy disk or any other media any computer running MELSEC ProfiMap V 2 0 can open the project and modify the whole PROFIBUS DP Network independently which GSD database file exists on this computer In order that both files are generated by MELSEC ProfiMap the function Export GSD database must be enabled Export GSD Database in the Menu Setup Command Save As This menu command is used to save a modified project with a new assigned file name This command uses the dialog box for file saving The
60. XChange support 2 3 25 Command GSD Device Database 2002000200000004 3 26 Vew mens e i tae we eee a we Gt Sn eae a ee a oe 3 27 Command Toolbar co paa Ba ee ee ka e a 3 27 Command Status bar 24 2 a 6 a re OK a Rw aa we 3 27 WindOW MENU s a0 6 eb e ba oe ew Ea ewe wo Ace ae ee ee g 3 27 Help Men a hee etek ce SO Ee ee eS 3 28 Command Index 0 0 a a a a 3 28 Command Using Help es 2484 24a eo 2 oe bale eee Ge ee oe 4 3 28 Command About MELSEC ProfiMap o s enoa sr seee rat eraai 3 29 802 3 MAP3 0 Interface o 4 1 Parameter Setting for AJ71M56EF2 aoaaa 002 208 4 1 Introduction and Overview a a a 4 1 Command OSI PARAMETER aoaaa a a 4 3 Command SAP AE PARAMETER 4 6 Command NAMED VARIABLE oaoa aaa aa 4 10 Monitoring Mode s sea oe aasa e daa E e a a E 4 15 Button Initial Checks s wisi a e a Ge A dd we E e a ee ee A 4 16 Button Error Status ek cc ee dui a ee A 4 17 Button Software Version a a a a 4 18 Button Statistics a ae ea dE a ae Aeda e a a Aia 4 20 Profibus DP Interface 5 1 Parameter Setting for A 1S J71PB92D 0 0 0 o o 5 1 Introduction and Overview o aooaa a a a a a a a a 5 1 Button Device Database a a 5 4 Button Master Parameter ae m nieh be Ea d 5 9 Button Define I O Slaves asocia aa we A Bow pe 5 15 Check UNIE sa a Ate a eb bate ody a o bee bad eR 5 25 STIG A
61. al eS A 0 E e a A eas se cs Item Meaning Shortcut Start Start the data transfer for the Trouble Information Monitor Cancel Leave this dialog in the current project Start Click on Stat to read the trouble information buffer from the connected module 2 Cancel E Click on Eme to leave this dialog without saving any changes in the current project Software Manual MELSEC ProfiMap Y w v D lt O _ E 6 48 Profibus FMS Interface FMS CREF Check Click on exce to check a selected CREF online real FMS communication The connected module must be in online mode for this operation At first a dialog for the CREF selection comes up Then the internal test sends an initiate req and checks the response Please refer to the manual of the unit for detailed information FMS CREF Check x CREF Nr to check B Select CREF Error Attr Error Code Error Detail fi h p h o h Check No Error s detected Result s Item Meaning Shortcut CREF Nr to check Displays the CREF number to be checked read only Error Attr Displays the error attribute read only Error Code Displays the error code if existing read only Error Detail Displays a detailed error code read only Check Results Interprets the result as a string read only Select CREF Perform a reselection of the CREF to be checked Care Start Start the data transfer for the FMS CREF Chec
62. appropriate file extension is appended automatically depending on the module type you selected m DP2 a FMS MMS Software Manual MELSEC ProfiMap Menus 3 16 The Menus MELSEC ProfiMap Command ASCII Import Note The menu command ASCII Import is only valid for the 802 3 MAP3 0 network The ASCII import provides two features Read the global variable list generated by MELSEC MEDOC plus Read the whole project generated by any other ASCII editor ASCII Import x Import ASCII Project Import Global Variables from MM Ea The purpose of reading the global variable list generated by MELSEC MEDOC plus is to avoid the generation of named variables twice This reduces your programming efforts The purpose of reading a whole project generated by any other ASCII editor is that you can use this software package just for downloading the parameter set to the network interface Any other intelligent network software can produce files for each specific node in the network The ASCII reading function enables you to use these files easily However you must follow an ASCII structure defined by MELSEC ProfiMap Import ASCII Project Before the ASCII Import can be executed you need to have a network interface module selected and a project opened When you select Import ASCII Project a dialog box for file open operations appears The format of the ASCII import file is predefined If you want to get familiar wit
63. ates to access the Server Features dialog Server Features Vora Wownigad Doren Upicad AATA AT TT K K KISI KI Item Meaning Shortcut OK Leave the dialog and save the data in the project Cancel Leave the dialog without saving the data in the project Default Reset the entire client feature string to default values Ca Rule The server features must be greater than or equal to the client features of the partner station Therefore all supported features of the A 15 J71PB96F are enabled Only disable a feature in case you do not want the partner station to use this service However this might affect the client feature setting of the partner station UY v 5 D ES e MELSEC ProfiMap Software Manual Software Manual Profibus FMS Interface 6 19 OK Click on 8K to leave this dialog and save all data from this dialog in the current project Cancel Click on Eme to leave this dialog without saving any changes in the current project Default Click on Beta to reset all data within this dialog to default values Be careful all your changes made will be lost After closing the FMS CRL Entry dialog a bit string for the Features Supported with specified information on the specified server and client features is generated The minimum configuration items for FMS partners are the read and write features MELSEC ProfiMap Y v D O e E 6 20
64. base item in the Setup menu View Window Help Network Download Settings Ctrl D Serial Port Selection Ctil E MxChange Support Ctrl M GSD Device Database Ctrl G v Export GSD Database Expo MEUSEDHET Settras If this menu item is checked any time you save your DP2 project the according GSD extract file with the same name but the extension EXT will be created in the same directory as well MELSEC ProfiMap a a a vi 2 2 U fe T Y 5 8 Profibus DP Interface Removing devices A device can be removed from the database by selecting the entry in the left list box and pressing the Eose button This deletes only the entry in the database reference file lt does not delete the GSD and bitmap files for that device These files have to be removed manually The reason for this is that it is possible to undo the delete function A Note The entry is immediately removed after clicking on the Bee button However you can add it once again later on a ay vi 5 2 u fe T a MELSEC ProfiMap Software Manual Profibus DP Interface 5 9 Button Master Parameter Within the Master parameters the baud rate different adresses and other parameters for the Profibus module A 1S J71PB92D can be set When you click on the Master Parameter button the following window appears Master Settings x n E MITSUBISHI ELECTRIC CORPORATIO E PB92D Mode E 1 500 Mbps a a v 5 D
65. bject 15 Type Structure Object Structured Type Object 20 MOL128 Array Object 21 M128L128 Array Object 22 M256L128 Array Object Y Details Print Cancel Item Meaning Shortcut OD Version Displays the version of the remote object dictionary read only Name Length Displays the length of all object names Details Displays details of the selected remote object Print Prints the Remote OD list OD Version Displays the version of the remote object dictionary read only Name Length Displays the length of all object names Y w v D lt O _ E MELSEC ProfiMap Software Manual Software Manual Profibus FMS Interface 6 43 Details Click on Bats to obtain a message box with detailed information on the current remote object Remote Object Details Q Print Click on e to print the displayed remote OD list Cancel Click on Ese to leave this dialog without saving any changes in the current project MELSEC ProfiMap Y v 5 Ko a Ya uv ho fe _ Qa 6 44 Profibus FMS Interface Monitor MELSEC ProfiMap Monitor Selection Click on tete to access the Monitor Selection dialog This dialog allows you to get the Software Version of the current module to perform an Initial Check of the connected module to get the Trouble Information buffer area and to Check CREFs online For all monitoring functions t
66. button the interaction with the network interface module will be stopped at the next possible protocol and the status window will be closed A new message box appears Download has been interrupted Data may be inconsistent Retry download Software Manual MELSEC ProfiMap Menus 3 12 The Menus MELSEC ProfiMap Button Verify The purpose of this function is to verify whether the parameters in the software and those in the connected network interface module match If the network interface module A 1S J71PB96F has been selected the following dialog box appears Only for an FMS project you can additionally specify the items to be verified Verify with A 1SN71PB96F When the Cancel button is pressed this dialog box will be closed Click on Ea to start the verify operation If the network interface does not respond the following dialog box appears Communication Error x If the serial port is not configured the following dialog box appears Communication Error x Software Manual Software Manual The Menus 3 13 If there is a positive response from the network interface module the verify operation starts and the following status window appears Verify with A 1SW71PB96F Ea Actual Status 0 100 If the verify function does not find any difference between the parameters in the network interface module and those in the software a message appears informing that the pa
67. cess the Client Features dialog Client Features ole momanton Report Witt Ippe aman Upload var Er E SU lt m E E Item Meaning Shortcut OK Leave the dialog and save the data in the project Enter Cancel Leave the dialog without saving the data in the project Default Reset the whole client feature string to default values Lat JF Rule The client features must be equal to or less than the server features of the partner station In case that the server features of the partner station are not known enable and MiWite only These services are compulsory and must be supported by the partner station OK Click on GK to leave this dialog and save all data from this dialog in the current project Cancel Click on tarea to leave this dialog without saving any changes in the current project Software Manual Profibus FMS Interface 6 17 Default Click on Defeat to reset all data within this dialog to default values Be careful all your changes made will be lost Y u D fe pu E Software Manual MELSEC ProfiMap 6 18 Profibus FMS Interface Button Server Features This dialog provides a transparent display of the supported server features of the selected CREF Features not supported by the A 1S J71PB96F are greyed Select these services for connection design carefully For a detailed description of all services refer to DIN 19245 part 2 Click on SewetFe
68. connected to another special function module memory For example the value of an analog module can directly be accessed without a PLC sequence program Memory Capacity The defined PROFIBUS FMS variable can read the current PLC CPU memory size which is used for application variables For example the memory size used for file register R can be read Depending on the selection different settings have to be specified Device Memory For Device Memory the PLC CPU Device Name and start address need to be specified Buffer Memory For Buffer Memory you need to specify which special function module is selected Y No and which data from the buffer of the special function module is to be accessed Buffer Memory Byte Setting the Y No The Y No is calculated very similar to the head address of a special function module The Y No is the last occupied I O address of the special function module without the last digit Example A special function module occupies X Y 120 13F then the Y No is 13 Setting the Buffer Memory Byte Generally the buffer memory of a special function module is limited to 16 kByte 0x0 OXx3FFF The PLC CPU can access the buffer memory in units of words In contrast to this the A 1S J71PB96F PROFIBUS FMS module allows to access the buffer memory in units of bytes In order to read or write data from or to a special function module the buffer memory address described in the User s Manual of the
69. cord object to a null object The cleared variable serves as dummy object in the current index of the object dictionary to keep the numbering of the remaining objects MELSEC ProfiMap Y v D O e E Y w v D lt O _ E 6 38 Profibus FMS Interface Remote Mode MELSEC ProfiMap Remote Mode Click on Miem to access the remote mode management dialog Here you can load the object dictionary from another station via the current CREF MELSEC ProfiMap provides only an overview of the loaded remote object dictionary of the other stations For further information refer to the Profibus Specification EN50170 volume 2 First you have to select a CREF for the communication with the remote station CREF Selection Lx available CRL Entries CREF Nr Symbol CREF No 02 Connection_01 y Cancel Item Meaning Shortcut CREF Set the CREF for remote OD download to MELSEC ProfiMap Number Symbol LJN OK Leave this dialog and save all data from this dialog in the current project Enter Cancel Leave this dialog without saving any changes in the current E SC project CREF Number Symbol Select a CREF from this list box for the communication with the remote station To obtain a valid CREF for the data transfer with the remote station please use the monitor function Check CREF Note This function is valid only for MMAC D and MSxx D connections OK
70. ction_09 11 2077h Connection_10 12 2077h Connection_11 13 2077h Connection_12 14 2077h Connection_13 15 2077h Connection_14 El Append Delete Change OK Cancel Default i Item Meaning Shortcut CRL Check Test all CREFs online Make sure that the PROFIBUS FMS parameters aJa are downloaded to the A 1S J71PB96F La Header Parameterize the CRL header and set the FMA7 usage at JE Append Append a CREF Catia Delete Delete the selected CREF at JD Change Reset the selected CREF atic OK Leave the dialog and save the data in the project Enter Cancel Leave the dialog without saving any changes in the project Esc Default Reset the entire CRL to default values ar JEJ Y v D O _ E Software Manual MELSEC ProfiMap Ya uv ho fe _ Qa 6 8 Profibus FMS Interface MELSEC ProfiMap CRL Check After selecting MAL all existing CRL entries of the project not the entries from the unit will be tested online by sending an FMS connection_open request Therefore it is only useful to check Master Master and Master Slave connections Be sure that all connections are written down to the unit The error value is described in the user manual of the A 1S J71PB96F unit Result Code Meaning OK Connection was verified successfully 2055 FMS refused the connection 2061 Connection already exists and cannot be tested 2062 The sp
71. cture read only Software Manual Software Manual Profibus FMS Interface 6 29 Define undefine Structures First select the OD index you want to edit via the tabs at the bottom of the Data Type Structure List dialog box Jos Data Type None 4 N Undefined Undefined Undefined U The according OD index is displayed read only in the upper section of the dialog box Current OD index to edit fis Only the entries within the column Value Setting can be edited Click on the first field below Value Setting and enter a number n from 1 10 to specify the number of structure elements you want to edit afterwards Define Undefine Structures So he a 00 P Nr of Elements Then click on the following rows 01 n within the column Value Setting on the drop down button l to select the desired data type for each element Integer16 Unsigned16 As you have edited one OD index you can proceed with the next one by clicking on the according Undefined tab log Data Type None 4 gt Defined A Defined 4 Undefined U Note A new defined structure provides the comment unreferenced Once the structure is used to define a Record variable its comment is changed to referenced and the structure cannot be undefined MELSEC ProfiMap Ya vi 3 ho fe i a Y w v D lt O _ E 6 30 Profibus FMS Interface MELSEC ProfiMap
72. d FMS1 al Config Module r Access Module Profibus FMS A 15J71PB96F Ji Remote Mode Monitor Read from A 1SW71 Write to 4 15471 CRL Settings OD Settings Verify Software Manual AJ71M56EF2 A 1S J71PB92D A 1S J71PB96F Software Manual The Menus 3 5 Section Config Module in the project dialog box Here you edit the dedicated parameters for the selected network interface module in specific editors All buttons and functions within the Config Module section depend on the module type selected At present 3 network interface modules are supported The following parameters can be edited depending on the selected module In case of AJ71M56EF2 MAP3 0 ETHERNET network interface OSI parameters SAP AE parameters Named variables Chapter 4 of this manual contains a detailed description of the meaning and setting of these parameters In case of A 1S J71PB92D Profibus DP network interface Device database Master parameters Definition of I O slaves Chapter 5 of this manual contains a detailed description of the meaning and setting of these parameters In case of A 1S J71PB96F Profibus FMS network interface Parameter settings m CRL settings OD settings Chapter 6 of this manual contains a detailed description of the meaning and setting of these parameters MELSEC ProfiMap Menus 3 6 The Menus MELSEC ProfiMap Section Access Module in the project d
73. ecified CREF is not a valid connection 2067 A transmission error occurred on PROFIBUS 206C This connection does not allow the CRL Check function 2071 The connection is established by another station 2077 The CREF attributes do not allow the execution of the CRL Check function 2258 The other specified station is not available or denied the access Note Only acyclic Master Slave MSxx D and Master Master MMAC D connections can be checked by the CRL Check function Header After selecting Hesder the CRL header parameters and the FMA7 connection usage can be set Append After selecting Arena a dialog comes up to set the Connection Attributes and the Protocol Attributes 32 CREF entries are possible If you select the FMA7 connection usage only 31 entries are usable In case that 32 CREF entries are defined and FMA7 shall be enabled the number of CREF must be reduced to 31 entries After that FMA7 can be enabled Note that the CREFs are sorted automatically after deleting Delete Click on Dele to delete the selected CREF The CRL will be sorted automatically This means that all following entry numbers are decremented by one If you want to avoid the renumbering of the CREF number use the CREF to be deleted as dummy In this case disable all client and server features Change Click on hate to edit the selected CREF entry Software Manual Profibus FMS Interface 6 9 OK
74. ecution of the CRL Check function 2258 The other specified station is not available or denied the access MELSEC ProfiMap Y v D O e E Y v 5 D e 6 24 Profibus FMS Interface MELSEC ProfiMap VFD Local Object Dictionary Click on abating to access the VFD Local Object Dictionary dialog box This dialog is used to define local FMS object types such as structures and variables Furthermore there are a maximum of 128 predefined FMS variables set As standard structures are not defined Objects are used for data transfer with partner stations For further information refer to Profibus Specification EN50170 volume 2 page 188 FD Local Object Dictionary M1238L128 M256L128 M384L128 M512L128 M 640L128 M768L128 M8 36L128 M1024L128 M1152L128 M1250L128 M1408L1285 M1536L128 M1E NT1170 x _ Cova Software Manual Profibus FMS Interface 6 25 Item Meaning Shortcut Start Index Set the start index of the object dictionary alt joy Structs Call the dialog of the static type dictionary structure definition a Js List of FMS Display the defined static variable object list Variables CJ Append Append one variable object to the list Car Ja Delete Delete the currently selected variable object ar Jo Change Change edit the current variable object EN OK Leave this dialog and save all data from
75. ed If you select Moe the default setting as described in the previous table will be loaded and Grange open the same dialog box If you selected the append function searches the first Name entry which is empty If the maximum number of 100 variables is reached this function is no more accessible If you select Has you can modify a parameter set which has already been defined The following dialog box will be displayed Name moo0L1 28 m Object Description PLC Device Description Object Type Janay E MELSECNET Access Hot y Data Type Boolean 5 Nr of Array Elements 128 0 8192 Nr of Octets Bits D BeErBay Device M a Lo Cancel Clear A _ pally When this dialog box is open then all buttons with dialog box Named Variable Setting cannot be accessed If canes is selected or the Ed key is pressed the previous setting before opening this dialog box is still valid and this dialog box will be closed If you select tie or press the Leie key all parameters will be set to the default values Get in this dialog box and Hoese in the dialog box Named Variable Setting are similar With eea you delete the variable currently selected However the variable number will still exist The other variables will not be renumbered Note Since the AJ71M56EF2 does not support Array variables at present make sure to select Object Type Simple Otherwise the AJ71M56EF2 wil
76. ed properly You do not need to be logged in to Windows NT with administrator privileges Please close all other running software before installation and do not run other installation programs during the installation of the MELSEC ProfiMap software Installing MELSEC ProfiMap on your hard disk Cc e D L D a amp To start the installation proceed as follows If you have not done already start Windows Insert the installation CD ROM into your CD ROM drive On the Desktop select the Start menu and the Run command Enter d ProfiMap300 disk1 setup exe for d enter the drive letter of YOUR CD ROM drive Hit Return or click on the OK button to proceed with the installation The Welcome screen appears Follow the given instructions that guide you through the installation procedure Continue with Next Then you are in the licence agreement window Please read these terms carefully Click on Yes if you want to proceed or No if you want to abort You are then in the User Information screen You must enter your name and company here Name Johnny Smith Company Alpha Inc Click Next gt to proceed with the installation You are now asked about the installation location Enter the destination directory where you want the MELSEC ProfiMap software to be installed default setting is C ProfiMap_3_00 If you agree with the default setting just click on Next gt If you want to choose another
77. ers range 1 99999999 PSAP String of ASCII characters O 9 and A F max 32 characters range 1 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF SSAP String of ASCII characters O 9 and A F max 32 characters range 1 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF TSAP String of ASCII characters 0 9 and A F max 64 characters range 1 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF NSAPaddress String of ASCII characters O 9 and A F and Space max 34 characters without space space is allowed but has no meaning makes it more readable range 1 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF Example If a message box is open all buttons in the dialog box SAP AE Parameter Setting cannot be accessed If you select JK or press the Ete key in the message box the box will be closed and the red pointer will be erased The dialog box SAP AE Parameter Setting remains open The purpose of this procedure is that you are able to correct the errors until all of them are corrected MELSEC ProfiMap MAP 3 0 4 10 802 3 MAP3 0 Interface MELSEC ProfiMap Command NAMED VARIABLE In a factory automation network the supervising computers exchange current production data If one computer wants to get data from a PLC programmable logic controller it reads the contents of a variable from another PLC If the computer wants to send data to
78. ew value If no more error message appears all values are entered correctly Software Manual MELSEC ProfiMap MAP 3 0 4 6 802 3 MAP3 0 Interface MELSEC ProfiMap Command SAP AE PARAMETER This function defines logical connections to other network nodes There are two types of connections Local_AE This is an application entry being server for other nodes Remote_AE There are application entries which will act as client to other nodes If you select this function without having modified these values before the default values will be loaded The default values are defined as follows Item Default values Application entry AE Local Remote 1 Remote 2 Remote 24 AEname MELSEC_A empty empty Aaa empty APtitle 1 3 9999 3 7 empty empty empty AEqualifier 00000001 00000000 00000000 00000000 PSAP 0001 empty empty paak empty TSAP 0001 empty empty srry empty NSAPaddress 49 00 01 02 00 00 00 02 00 01 empty empty empty One Local_AE and up to 24 Remote_AE can be defined The term empty in the above table means that there is no value or ASCII character present Software Manual Software Manual 802 3 MAP3 0 Interface 4 7 If you select this function the following dialog box appears displaying only Application Entry AE and AEname SAP AE Parameter Setting Ea r List of AP Entries Entry No Application Entry
79. few others Software Manual Profibus FMS Interface 6 13 Connection Attribute This parameter contains further information on the connection type of connection oriented relationships Valid values are D for defined connections master master or master slave for open connection at the requester master master connections O for open connections at the responder master master or master slave connections Control Interval The Control Interval specifies the length of the time interval for the connection control of connection oriented relationships This value is multiplied by 10 ms to determine the time acyclic including ACI cyclic including CCl If the connected FMS device does not support the Control Interval feature set this value to 0 Max SCC This parameter specifies the maximum permitted number of parallel confirmed services to the partner station Rule Max SCC must be smaller than or equal to Max RCC of the other station Max RCC This parameter specifies the maximum permitted number of parallel confirmed services from the partner station Rule Max RCC must be greater than or equal to Max SCC of the other station Max SAC This parameter specifies the maximum permitted number of parallel unconfirmed services to the partner station Rule Max SAC must be smaller than or equal to Max RAC of the partner station Max RAC This parameter specifies the maximum permitted number of pa
80. fico 16383 fomes ns min T_sdr jo m1023 3125000 ms max T_sdr 5087 65535 5208333 me Quiet Time T_qui 2 10 127 2291687 ms Setup Time T_set 5 2 0 520833 me Target Rot Time Tt i0000 256 16777215 104166662 ms GAP factor ft 10 HSA 126 1 126 Max retry limit fi 0 7 General timing factors are displayed in recalculated form based on the selected baud rate and absolute time durations The conversion factors are the following Parameter Meaning Range Remark Baud rate Transfer rate see selection Must be supported by all slaves TLsl Slot time a 16333x Max Interval to wait for response min T_sdr Min Station delay of responder 11 1023 x t_bit max T sdr Max Station delay of responder es Banos T_qui Quiet time 0 127 x t_bit T 0 if no repeater present T_set Setup time 1 255 x t_bit T_tr Target rotation time e 16777213 Ya uv 2 ho fe e a GAP factor Controls the GAP update time T_gud HSA Highest station address 1 126 1 100 Software Manual MELSEC ProfiMap Y w v D lt O _ E 6 6 Profibus FMS Interface MELSEC ProfiMap When pressing the Maam button all values of the currently selected baud rate are set to default values The inputs are checked against the input limits when leaving the dialog with the aK button Additionally the following consistency checks are per
81. fied in the following dialog box See Vendor Mitsubishi Electric 170 y E Revision Available Slave Systems Bitmap A4J95TB32 16DT 8DI 8D0 AJ95TB2 16T 16D0 AJSSTB3 16D 16 DI TIO 24 16DE TIO 244 32DE TIO 244 16DE 16D4 0 54 GSD DDB File ier 21037 gsd ET 200B 4 8A1 BES 134 0KHOD WAGO 1 0 SYSTEM DP FMS Bitmap File fue 21037 bmp Note Refer to chapter 5 for a detailed description of the GSD Device Database features Software Manual Software Manual The Menus 3 27 View menu E Window F v Toolbar v Status Bar In the View menu you can select the following menu commands Command Purpose Shortcut Hotkey Tool bar Enable disable tool bar none none Status bar Enable disable status bar none none These two menu commands allow you to select whether the tool bar and the status bar will be displayed or not A check mark in front of the commands shows that this function is currently activated Command Toolbar If the toolbar is enabled you will find additional buttons for creating documents opening documents saving documents or the help menu Command Status bar If this command is enabled a status bar will be displayed at the bottom of the window informing you about the selected item and the current status of the project Window menu Serie Help 1 sample mms 2 sample dp2 Y 3 sample fms This menu provides the standard window functions
82. formed min T_sdr lt max T_sdr a T_qui lt min T_sdr max T_sdr lt T_sl a sl lt T_tr Note f you are not an experienced PROFIBUS network administrator you should not change the Bus Parameters Calculation of the Target Rotation Time TTR TTR ETRT ATT x baud rate NOM x TSL 2 Notation TTR Target Rotation Time ETRT Empty Token Rotation Time ATT Average Transmission Time NOM Number of installed masters Worst case calculation example based on 500 kBaud TTR NOM x 1033 NOM x 28726 NOM x 3500 2 NOM x 31509 Bit times NOM x 63 ms Software Manual Profibus FMS Interface 6 7 Button CRL Settings Communications Reference List zz Click on Besa to start the CRL Static Entry Setting dialog needed to define CRL communication references max 32 per master to display all defined CREFs and to check the CRL Communications Reference List online You can also set the CRL header and the FMA7 connection usage The list of CREF entries displays the number and the name of all CREFs The status of all connections is displayed as well The error value is described in the user manual of the A 1S J71PB96F module CRL Check CRL Header FMA Usage l Header m List of CREF Entries No State Symbolic Name lasse mich auslesen Connection 02 5 2077h Connection_04 6 2077h Connection_05 7 8 2077h Connection_06 2077h Connection_07 9 2077h Connection _08 10 2077h Conne
83. function Download Selection Select NW select network This button in the Master Settings dialog opens the network database From the network database different network connections can be defined edited and selected Refer to chapter 7 for details on the network database Get HA get head address Click on this button in the Master Settings dialog to search for installed master modules and retrieve their head address The found head address can be transferred to the corresponding parameter MELSEC ProfiMap x gt The 1 PB92D unitis installed in slot 1 N 1O0 Address ofthis module is 0x002 Search again for another PB92D unit Yes No Click on Yes to search for further master modules Click on No to accept the displayed one and transfer the corresponding head address to the master settings Further master modules will be displayed if searched for MELSEC ProfiMap 9 The 2 PB92D unit is installed in slot 2 N 1O0 Address ofthis module is 0x004 Search again for another PB92D unit Yes No MELSEC ProfiMap a a o vi 2 2 u fe T a 5 14 Profibus DP Interface The following message appears if no further master module has been found MELSEC ProfiMap a a a v 5 D 9 MELSEC ProfiMap Software Manual Profibus DP Interface 5 15 Button Define I O Slaves i This function defines the network configuration with the help of a graphical editor
84. h this features create a small project with MELSEC ProfiMap Perform an ASCII export and look at the syntax This syntax will be used by the ASCII import function as well It is quite easy to emulate this syntax Software Manual Software Manual Import Global Variables from MM The Menus 3 17 If you select Import Global Variables from MM the import function is able to transfer the following variable formats IEC 1131 3 variable supported by MM MAP 3 0 MMS variable supported by AJ71M56EF2 BOOL Boolean INT Integer DINT Octet string 2 octet WORD Octet string 2 octet DWORD Octet string 4 octet ARRAY Array DUT Data Unit Type Not possible To be able to import global variables in MELSEC ProfiMap from MM it is necessary to perform an ASCII export of the Global Variables from MELSEC MEDOC plus Refer to the MELSEC MEDOC plus Reference Manual how to generate an ASCII export file of the global variables How to import arrays IEC 1131 3 array MMS array BOOL Boolean INT Integer DINT Not possible WORD Integer DWORD Not possible All other array variables cannot be imported A message box appears on the screen Cannot import an array variable Since MMS type projects require a MELSEC NET address which is not supplied by the MELSEC MEDOC plus global variables this import function will set the MEL
85. he ProfiBus master module only If you intend to configure the master module exclusively via the programming port you do not need to install MELSEC EasySocket If MELSEC EasySocket is not installed but required afterwards you will be prompted for the installtion Button functions With the Next button you will leave the current menu and enter the next menu The Cancel button ends the ProfiBus installation procedure and with the Back button you go to the previous window Software Manual The Menus 3 1 The Menus Starting MELSEC ProfiMap Double click on the MELSEC ProfiMap icon This starts the MELSEC ProfiMap software and displays the start up screen Confirm with a click on the Ha button or simply hit Ed Menu after Start After pressing the 8k button the menu bar becomes active The menu bar offers the following pull down menus EJ ProfiMap 3 0 olx File Setup View Help als s 5 alela 4 The pull down menus can be selected via mouse or keyboard File Car E Setup J s View aj y Help Cag CH The items in the open pull down menus can be accessed via mouse or keyboard The underlined character will start the function In addition there are some menu items which may be started using predefined hotkeys Software Manual MELSEC ProfiMap Menus 3 2 The Menus MELSEC ProfiMap The toolbar just below the main menu contains buttons for an instant access of the most frequently used functions of M
86. he module must be in operation mode 0 A detailed description follows Monitor Selection Lx Y a Initial Check Trouble Information Check CREF Cancel Item Meaning Shortcut S W Version Call the software version dialog Lat iv Initial Check Call the initial check dialog atic Trouble Call the trouble information monitor Information CO Check CREF Perform an online check of CREFs Cancel Leave this dialog without saving any changes in the current project S W Version Click on LS Wverion to read the current software version implemented in the module Initial Check Click on hitene to perform a hardware test of the connected module Trouble Information Click on Treubleinfomaton to display the error buffer area of the PLC Check CREF Click on _ SheckeRee to check a selected CREF online C E ick on Gare to leave this dialog without saving any changes in the current project Software Manual Profibus FMS Interface 6 45 Software Version Monitor Click on sWWerion to access the Software Version Monitor dialog This dialog allows you to read the implemented software version from the connected module Software Version Monitor Item Meaning Shortcut Start Start the data transfer for the Software Version Monitor at Cancel Leave this dialog in the current project Start Click on tit to display the software versi
87. he module must be set to the parameter set mode Set the dip switch on the module to 1 parameter set mode Reset the PLC and set it to STOP Start the transfer Write to A 1S J71PB96F x m ltems to be written to A 1S J71 PB96F MV Master Bus Parameters F CRL Information After the successful transfer set the module to operation mode 0 Reset the PLC and set it to RUN Item Meaning Shortcut Master Bus Select the master and bus parameters to be written to the ara Parameters module Lajin CRL Information Select the whole CRL to be written to the module Car oj Structures Select the local OD to be written to the module Variables 33 OK Start the transfer to the module Cancel Leave this dialog without starting the download to the module Y 2 w u D O _ E Master Bus Parameters This checkbox enables disables the download of the master and bus parameters Software Manual MELSEC ProfiMap Y w v D lt O _ E 6 52 Profibus FMS Interface MELSEC ProfiMap CRL Information This checkbox enables disables the download of the entire communication reference list Structures Variables This checkbox enables disables the download of the entire local object dictionary OK Click on ok to leave this dialog start the transfer and write all data to the module A successful transfer will be confirmed by Transfer comp
88. he network database is not exported automatically and is not part of the dp2 project file The network connection settings are stored in the ProfiMap subdirectory net in the file mels_net mdb If you want to transfer the network database to other PCs copy it manually Software Manual A Address Type 6 33 ASCII Export 3 18 ASCII Import 3 16 Ass Abt Cl 6 20 Bus Parameter 6 5 C Cables 3 24 Check CREF 6 44 Check for QE71 units 7 12 Check unit 5 25 Choose Structure Index 6 37 Client Features 6 16 Communications Reference List 6 7 Connection test 7 11 CPU port connection 7 5 CREF Number Symbol 6 38 CRL Check 6 8 6 22 CRL Information 6 50 6 52 6 53 CRL Settings 6 7 CRL Static Entry Setting 6 7 Current Index 6 41 Current index to edit 6 28 D Data Type Structure List 6 27 Define I O Slaves 5 15 Define undefine Structures 6 29 Device Database 5 4 Device Name 6 34 Device Number 6 35 Display OD 6 39 Download selection 5 13 E Editing an FMS CRL Entry 6 10 Ethernet connection 7 7 F FDL address 6 4 First allowed index of variables 6 28 FMS CREF Check 6 48 FMS CRL Entry 6 10 Freeze mode 5 28 Software Manual Index G Get head address 5 13 Get Header 6 40 Get OD 6 39 Get Range 6 41 GSD Device Database 3 26 GSD Extract 5 7 GSD Extract Files 5 7 H Header 6 8 6 20 Help 1 1 nitial Check 6 44 nitial Check Monitor 6 46 nstallat
89. her a variable name is used twice The following error message will be displayed MELSEC ProfiMap O Value out of range Name Press F1 to get help If the variable name has already been used for another variable there will be a special mark Software Manual 802 3 MAP3 0 Interface 4 13 The ranges are defined as follows Device Object Type Data Type Head address Data Length Array Elements Simp e Boolean bit string 0 8191 0 8191 data length 1 1 8192 n v n v Array Boolean O 8191 array elements 1 8192 Simp e Boolean bit string O 7FF O 7FF data length 1 n v n v Array Boolean O 7FF array elements 1 Simp e Boolean bit string O FFF O FFF data length 1 Array Boolean O FFF array elements 1 Simp e Boolean bit string 0 2047 0 2047 data length 1 Array Boolean 0 2047 array elements 1 Simp e Boolean bit string 0 1023 0 1023 data length 1 Array Boolean O 1023 array elements 1 Simp e nteger octet string 0 6143 0 6143 data length 2 1 Array nteger O 6143 array elements 1 Simp e nteger octet string 0 255 O 255 data length 2 1 Array nteger O 255 array elements 1 Simp
90. ialog box These functions interact with the network interface modules Therefore it is necessary that the parameter setting cable is installed either to COM1 or COM2 of the personal computer and to the network module Note Depending on the network interface module different parameter setting cables must be used m For the AJ71M56EF2 use the red programming cable SCO9 m For the A 1S J71PB92D or A 1S J71PB96F use the blue ProfiCab cable It is included in the software package Refer to Setup Serial Port for further details The following buttons and functions are provided refer to chapters 4 5 6 for detailed descriptions of the individual module setups Item button Purpose Remote Mode Loads the object dictionary from the remote station Monitor Opens a dialog box for monitor selection Depends on the selected network module Read from Reads parameters from the connected network module Write to Writes the created parameters to the network module Verify Checks whether the created parameters and the parameters in the connected network module are equal O Not available for Profibus DP module Not available for MAP3 0 module Button Remote Mode This function is supported by the FMS modules only and accesses the remote mode management dialog Here you can load the object dictionary from the remote station via the current CREF MELSEC ProfiMap only provides an overview of the loaded remote
91. ic Entry Setting This function only tests MSAC D and MSxx D connections Other connections will automatically result in an error After the online test the column State in the CREF list shows OK for a valid master connection or a hexadecimal error value Please see the manual of the unit for detailed information Click on Mae to access the CRL Check dialog MELSEC ProfiMap gt Are you sure that all CRL entries are written gt down to the PB96F module se Meaning Shortcut Execute CRL online check y Abort CRL online check inj Yes Click on to check the entire CRL from the current project online The dialog shown below comes up and displays the number of the CREF currently being checked Counter value actual CREF fi 5 Here you can still abort the CRL online check with tama No Click on Lt to abort the CRL online check Software Manual Software Manual Profibus FMS Interface 6 23 CRL Check result codes Result Code Meaning OK Connection was verified successfully 2055 FMS refused the connection 2061 Connection already exists and cannot be tested 2062 The specified CREF is not a valid connection 2067 A transmission error occurred on PROFIBUS 206C This connection does not allow the CRL Check function 2071 The connection is established by another station 2077 The CREF attributes do not allow the ex
92. ice Access Point It has to be equal to the Poll List SAP for MSxx D connections 0 2 60 63 128 ao Remote Address Sets the FDL address of the remote station 0 127 255 wel Remote LSAP Sets the service access point of the remote station 0 2 63 128 255 wi Connection Type Select the type of the current connection See selection Ja Connection Attribute Sets the attribute for connection oriented relations See selection Jiu Control Interval Sets the WDT time interval for connection control The selected CREF is supervised by this WDT Q 4294967294 x 10 ms cn Max SCC Sets the maximum value Counter or the Send Confirmed Request 0 1 Max RCC Sets the maximum va or the Receive Confirmed Request Counter agaj Max SAC Sets the maximum value for the Send Acknowledged Request Counter Necessary for unconfirmed services E Max RAC Sets the maximum value for the Receive Acknowledged Request Counter Necessary for unconfirmed services aa Max send PDU H Sets the maximum permissible priority ength of PDUs sending high ac Max send PDU L Sets the maximum permissible priority ength of PDUs sending low cn Max receive PDU H Sets the maximum permissible high priority ength of PDUs receiving ca Max receive PDU L Sets the maximum permissible low p
93. ion 2 1 L LOD Variable Index 6 37 M Master Parameters 5 9 Master Settings 6 3 Master Bus Parameters 6 50 6 51 6 53 MELSEC EasySocket 2 4 Module Priority 6 4 Monitor Selection 6 44 MXChange support 3 25 N ame Length 6 42 etwork configurations 7 1 etwork connection 5 13 etwork database 5 13 7 1 etwork No 6 33 etwork symbolic name 7 14 umber of defined structures 6 28 6 37 O OD Version 6 42 P Page Setup 3 21 Param Settings 6 3 Index i Parameter Setting for A 1S J71PB96F 6 1 Poll List LSAP 6 20 Print 3 20 Printer Setup 3 20 Profibus FMS Interface 6 1 Project dialog box 6 1 R Read from A 1S J71PB96F 6 50 Record Variable 6 36 Remote mode 6 38 Remote OD Display 6 42 Remote OD Index 6 40 Remote OD Set 6 39 S S W Version 6 44 Search PB92D units 7 11 Select CREF 6 39 Select network 5 13 Serial Port Selection 3 24 Server Features 6 18 Slave Module Selection 5 21 Software Version Monitor 6 45 Start DP 5 26 Static Data 6 41 Static Types 6 41 Station No 6 33 Stop DP 5 27 Structures Variables 6 50 6 52 6 53 System Requirements 2 2 T Target Rotation Time TTR 6 6 Toolbar 3 2 Transfer of network database 7 16 Trouble Information 6 44 Trouble Information Monitor 6 47 U User Parameters 5 19 V Verify 3 12 5 30 Verify with A 1S J71PB96F 6 53 VFD Local Object Dictionary 6 24 MEL
94. k alt is Cancel Leave this dialog in the current project Esc CREF Nr to check This field displays the current number of the selected CREF Error Attr The error attribute represents the response of the performed FMS service Error attribute 1 The received FMS PDU is an Initiate Response Error attribute 2 The received FMS PDU is an Abort MELSEC ProfiMap Software Manual Software Manual Profibus FMS Interface 6 49 Error Code The error code represents the buffer memory of the receive area For detailed information please refer to the manual of the module Error Detail The error detail is an additional error information For detailed information please contact your vendor Check Results This field displays a description of the obtained failure Select CREF Click on SeleteREF to reselect of the CREF to be checked Start Click on stat to start the data transfer for the FMS CREF Check Cancel Click on Eme to leave this dialog without saving any changes in the current project MELSEC ProfiMap Y 2 w v D O e E 6 50 Profibus FMS Interface Read from A 1S J71PB96F Read from A 15 71 Click on Eimas to select the data to be read from the module There are three selectable items Check any item to be read a Master Bus Parameters CRL Information m Structures Variables Read from A 1S J71PB96F x m ltems to be read from A 15 J71PB96F pes M
95. l have a malfunction MELSEC ProfiMap MAP 3 0 4 12 802 3 MAP3 0 Interface MELSEC ProfiMap Name Specifiy the name of the variable A variable name can consist of 1 to 32 characters Object Description If the Object Type Array is selected the data types Integer or Boolean can be specified Number of Octets will be disabled grayed They will be calculated by the software itself After selecting the Object Type Simple you can select from the following data types Boolean Integer Octet String Bit String Number of Array Elements will be disabled grayed This entry is invalid f MELSECNET Access Host is selected Station No is disabled grayed This entry is invalid f MELSECNET Access Master is selected Station No is still disabled f MELSECNET Access Slave is selected Station No is valid You can define a Station No range 1 to 64 f you select Hok or press the Exe key the range checking operation will be started If no error is found the dialog box Named Variable Setting Variable at Idx will be closed and all modifications will be accepted The range checking operation stops after having found the first error A triangle shaped red pointer on the left side of the dialog box Named Variable Setting Variable at Idx points on the error The range checking operation checks whether there is any entry out of range and whet
96. leted Cancel Click on Eme to leave this dialog without downloading the project to the module Software Manual Profibus FMS Interface 6 53 Verify with A 1S J71PB96F Verify Click on Very to select the data to be verified with the module There are three selectable items Check any item to be verified m Master Bus Parameters a CRL Information a Structures Variables The module does not need to be set to the online mode Items to be verified with A 18 J71 PB96F FT Master Bus Parameters penne CAL ini F Structures Variables core Item Meaning Shortcut Master Bus Select the master and bus parameters to be verified with the 1 Parameters module Lat J m CRL Information Select the whole CRL to be verified with the module Car J cj Structures Select the local OD to be verified with the module Variables CJ OK Start the verification transfer from the module Cancel Leave this dialog without starting the verify function Master Bus Parameters This checkbox enables disables the verification of the master and bus parameters CRL Information This checkbox enables disables the verification of the entire communication reference list Y w u D lt O e E Structures Variables This checkbox enables disables the verification of the entire local object dictionary Software Manual MELSEC ProfiMap 6 54 Profibus F
97. luding sample projects These executable application is used to demonstrate the operation of the program with the help of the exercises provided in this manual c Le WwW v gt D O Ez If you re not yet familiar with MS Windows please at least read the Windows Fundamentals section in the Windows User s Guide or work through the Windows Tutorial accessible through the Help menu of the Windows Program Manager This will teach you what you need to know about using the basic elements of MS Windows and the operating procedures that are identical in all Windows application programs If you have problems with parameter settings please refer to the users manuals of the concerning open network modules If you get stuck don t despair help is never far away If you run up against seemingly insoluble problems or if you have questions about MELSEC ProfiMap or the connected programmable logic controller PLC configuration please first refer to the manuals and documentation Many answers and solutions can also be found directly in the MELSEC ProfiMap context sensitive online help system which can always be accessed by pressing E Make use of the Index command in the Help menu as well as this will often locate the information you need If you cannot find answers to your questions in any of these places contact your local MITSUBISHI ELECTRIC representative or call our European headquarters in Ratingen directly
98. ly specify the items to be transferred Read from A 1SW71PB96F x Items to be read from 4 1S71PB96F T CRL Information FP Structures Variables coca When Cancel is selected this dialog box will be closed To start the upload operation click on the Mak button or simply press Ene The upload operation will be started if there are no errors MELSEC ProfiMap Software Manual Software Manual The Menus 3 9 If the network interface does not respond the following dialog box appears Communication Error x Communication Timeout Please check your cable port settings and the special unit settings Communication Error Q COM Port is not available If there is a positive response from the network interface module the reading operation starts and the following status window appears Reading from A 1SW71PB96F x Actual Status 0 100 The bar graph informs you about the status of the upload operation When you click on the Career button during the upload operation the interaction with the network interface module will be stopped A new message appears informing you that the upload operation has been interrupted and that the old parameter data are still valid This means that the parameters defined previously are not overwritten by the uploaded parameters The old parameters will only be updated by the uploaded data if the upload operation was done completely and succes
99. m MITSUBISHI ELECTRIC no part of this manual may be reproduced stored in a retrieval system of any kind or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise or translated into another language MITSUBISHI ELECTRIC reserves the right to make changes to the technical specifications and information in this handbook at any time and without prior notice The IEC 1131 3 DIN 19245 standard cited in this manual is available from the publishers Beuth Verlag in Berlin Germany 3rd edition Copyright December 1999 MITSUBISHI ELECTRIC EUROPE B V Factory Automation Gothaer StraBe 8 D 40880 Ratingen Germany Phone 49 21 02 486 0 Fax 49 21 02 486 717 Printed in Germany Article number 65778 C Chapter 1 Chapter 2 Chapter 3 Software Manual Contents CONTENTS Introduction wise we ee ee ew we le E 1 1 AA Bete SecA eet we Say ae bs ae a oe ee oe 1 1 If you re not yet familiar with MS Windows 2 0 a 1 1 If you have problems with parameter settings o 0 0 1 1 IF you get stuks circa A me es 1 1 Typographic conventions and other hints 0 20004 1 2 INSTA 4 ad hh ee ee a A le a ae a 2 1 Before YOU BEGIN ss s ese ee o Re ee ee ee A 2 1 Software PURPOSE sor d we iy daw eK A o ec a we A ew 2 1 General Features 4 em ea A ER eee 2 1 System Requirements 4 e os e a ee Phe es 2 2 Minimum hardware configuration
100. me ASCII Import Reading a project generated by a different software O S A ASCII Export Writing a project to other format to be read by different software E Print Printing the current project P Printer Setup Opening the printer setup R Page Setup Defining the parameters to be printed T Project select Opening one of the four latest used projects 1 2 3 4 Exit Leaving the software X The marked items are only valid for configuration of 803 3 MAP3 0 network All these menu commands are described in detail on the following pages Note PROFIBUS DP Projects and device databases from MELSEC ProfiMap Ver 1 0 can only be used in Ver 2 0 after conversion with the included conversion tool MELSEC ProfiMap Menus 3 4 The Menus MELSEC ProfiMap Command New The menu command New is used to create a new project The purpose of this menu command is to setup network parameters for a MELSEC A Q and AnS QnAS series network interface module Up to 8 projects can be opened at the same time First you have to select one of the following network modules you want to setup Profibus DP A 1S J71PB92D Profibus FMS A 1S J71PB96F 802 3 MAP AJ71M56EF2 Network Setup x Select Module Type MELSEC Device IER FNE TS TET Cancel Then the project dialog box appears where you configure and access the selected network module untitle
101. n Software Manual Software Manual 802 3 MAP3 0 Interface 4 15 Monitoring Mode This paragraph describes the possibilities of monitoring with the AJ71M56EF2 MMS interface To activate the monitor selection window click on the Here button in the project dialog box Monitor Selection x Error Status Software Yersion Statistics Cancel The monitoring options with the AJ71M56EF2 MMS interface are grouped into four different items Item Purpose Shortcut Initial check The AJ71M56EF2 will boot after power on or reset During boot procedure it will perform a self diagnostics With this atic item the self diagnostics result can be made visible Error status Using this item any error during network communication can be made visible Lar Jie Software version Using this item the current ROM software version can be read Par JoJ Statistics Using this item layer 2 and 4 statistical information can be made visible ais Note f a monitor dialog box is open all the buttons in the project dialog box cannot be accessed MELSEC ProfiMap MAP 3 0 4 16 802 3 MAP3 0 Interface MELSEC ProfiMap Button Initial Check The purpose of this function is to perform a self diagnostics check of the AJ71M56EF2 and to monitor the result in a window The following dialog box appears Initial Check Monitor No error On the left side the items of the self diag
102. nd PDU L values of the FMS partner Features Supported This field displays the feature supported string for the current CREF It specifies which FMS services and options are supported by this relationship This value is read only For changes use the Client Features or Server Features dialog Client Features Click on Beers to open a detailed editor for editing the supported client features Server Features Click on Demers to open a detailed editor for editing the supported server features Software Manual Software Manual Profibus FMS Interface 6 15 OK Click on 8K to leave this dialog and save all data from this dialog in the current project Cancel Click on Eme to leave this dialog without saving any changes in the current project Default Click on Beta to reset all data within this dialog to default values Be careful all your changes made will be lost MELSEC ProfiMap Y v D O e E Y v 5 D 2 e 6 16 Profibus FMS Interface MELSEC ProfiMap Button Client Features This dialog provides a transparent display of the supported client features of the selected CREF and calculates the client feature string which is defined in the standard Features not supported by the A 1S J71PB96F are greyed Select these services for connection design carefully For a detailed description of all services refer to DIN 19245 part 2 Click on GientFeaiues to ac
103. ng Insert DP Slave opens the Device Database dialog Insert DP Slave Delete DP Slave Modify Settings You can also double click directly on any item to modify it Instead of clicking the right mouse button for adding and deleting devices you can use the i and La key Right click within the graphical network configuration editor and select Insert DP Slave to access the Device Database After having selected a group in the window Device Database a list of all slave models assigned to the respective group is displayed For the selected slave the vendor and revision string the bitmap and the path of the GSD file and the bitmap file are displayed refer to the section DEVICE DATABASE for further details Slave Device Group Vendor PTEE egma ee Revision MEU GER 1 02 Available Slave Systems Bitmap GSD DDB File Melcf032 gsd Bitmap File Fen bmp Software Manual Software Manual Profibus DP Interface 5 17 When a model is selected and the EM button has been pressed the Slave Parameter Settings dialog appears Slave Parameter Settings Sass gt E Slave_Nr_001 watcnaca me 065535 10 ms E a a a a a a a a a User Rarer In the upper part of the window the name of the selected device and the vendor name are displayed If you have selected a wrong device you can leave this window with the Heem button You then jump back to the Network
104. ning Min slave interval 0 65535 x 100 us Smallest allowed period of time between two slave poll cycles This ensures that the sequence of function requests from the DP master can be handled by the DP slave This value is valid for all installed slaves The slowest slave defines this value Polling timeout 0 65535 x 1 ms In case of master master communication this parameter specifies the max amount of time it may take the requestor to fetch the response Data control time 0 65535 x 10 us This parameter defines the period of time during which the A1SJ71PB92D notifies the slave operation status This time is 6 times longer than the watch dog control of slaves If you want to use the factory set default values click on Eoas and all values are set to the standard values Software Manual Profibus DP Interface 5 11 Bus Parameter This function allows to select the baud rate and to modify any parameters like timeouts which are related to the baud rate The last settings made are stored independently for each baud rate so that by selecting a different baud rate these settings are shown again Bus Parameter Ea Select Baudrate 1 500 Mbps m Profibus FDL Parameters Slot Time T_s 300 1 65535 0 200000 ms min T_sdr 0 65535 0 007333 ms mas T_sdr 150 0 65535 0100000 ms Quiet Time T_qui 0 255 1 255 50000 1 1048576 fo 000000 ms fo 0006
105. nitor o 6 46 Trouble Information Monitor 2 enn darka 6 47 FMS CREF Check e e s ae ea Ae eee eee a ye a BB ee 6 48 Read from A ISII71PBOGE s e mot atoe ae a ba ee aa wb da 6 50 Write to A 1SJJ71PB96F 2 s c cac ra caan unestado e troa 6 51 Verify with ACISIHZIPBOGE coco ee ee 6 53 Network Database aaao 0002 7 1 INMOGUCHON Los wok bald ad a Slee dia ee ed 7 1 Supported network configurations 2 o 7 1 Supported connection types soa s ecra espa tot aeea 7 2 Database Handling 464 ac osa dh eh a a ae we RRO ee a E es 7 3 Opening the network database 0 0 0 0 e e 7 3 Defining a CPU port network connection 2 2 02 o 7 5 Defining an Ethernet connection 2 2 a 7 7 Network connection test oo ss ema sehe snena tina Sethia 7 11 Changing the network symbolic name 0 2005 7 14 Clearing a network connection index a o aoa a o 7 15 Transferring the network database 0 0 0 ae 7 16 MELSEC ProfiMap IV Contents MELSEC ProfiMap Software Manual Introduction 1 1 Introduction This manual IS a compact guide to using MELSEC ProfiMap software suitable both for beginners and experienced users upgrading from other systems The manual includes explanations of the terms and structural concepts about the software and the configuration of an open network system The manual provides a precise step by step description of how to use MELSEC ProfiMap inc
106. nostics function are displayed When tasa is selected or the J key is pressed this dialog box will be closed Afterwards the dialog box Monitor Selection will be active If you select star or press the key the connected AJ71M56EF2 will be asked for the self diagnostics result once The result will be displayed in the Error Information area If there is no error the corresponding message will appear If an error occured during the self diagnostics function then Error message will be dispayed at the Error Information area If the serial communication fails the following message will be displayed Communication Error x Software Manual 802 3 MAP3 0 Interface 4 17 In this case please check the transmission cable and the correct type of the serial interface It must be the SC 09 cable Please check the serial port choosen in MELSEC ProfiMap as well Then try the diagnostics function again Button Error Status The purpose of this function is to check the current error status at the AJ71M56EF2 The following dialog box appears Error Status Monitor Jeet Eon Buen If you select Cancel or press the 3 key this dialog box will be closed Afterwards the dialog box Monitor Selection will be active If you select Hse or press the Ere key the connected AJ71M56EF2 will be read for the current error status The result will be displayed as follows Error Status Monitor
107. ofiMap Click on edie to access the Hex Editor for the Slave User Parameters The relevant area for the selected module is indicated by coloured background and arrows The address is shown in clear as tool tip Slave User Parameters eje 00 0 0 Po e poe poe Po a oe a oa ota oe per er fe ae a poc poc paa per pa per a oe e or ac or fac or pad pec oe oc ee oe ac e oe ae ADDRESS 0057h VALUE N A Be careful when editing these parameters via the hex editor You should have a detailed slave documentation by the manufacturer to prevent errors in the parameterization Note These parameters should only be changed by experienced network administrators In general the Slave User Parameters should not be changed If no extended user parameters are available at the slaves GSD file this dialog is opened Consult your slave device manufacturer to generate correct settings Software Manual Profibus DP Interface 5 21 Slave Module Selection When an I O module is selected the type of module can be defined after clicking on Select Modules This button is enabled depending on the GSD file of the selected Profibus DP slave The following dialog box is displayed Slave Modules po MT ADAY Profibus DP offers the possibility to support modular slave devices The slave device is the summary of all modules installed to the slave The GSD file includes all selectable modules for the slave device
108. oftware Manual Parameter Setting for A 1S J71PB96F Introduction and Overview This chapter describes how to generate the A 1S J71PB96F parameter settings After selecting the command New in the File menu see chapter 3 for details select the module type Profibus FMS A 1S J71PB96F from the menu Network Setup x Select Module Type MELSEC Device Profibus FMS A 1S 1PB96F The project dialog box shown below for the network setup appears It is subdivided into two sections one for the offline configuration and one for the online access of the module The following functions are provided Config Module Parameter Settings CRL Settings OD Settings Access Module Remote Mode Monitor Read from A 1S J71 Write to A 1S J71 Verify MELSEC ProfiMap Y w u D 2 O a 6 2 Profibus FMS Interface If one setting dialog box is open e g Param Settings the other buttons in the dialog box Config Module cannot be accessed untitled FMS1 olx r Config Module Access Module Profibus FMS A 1S J71PBS6F zu Remote Mode Monitor Read from Af1 sy 1 Write to 415471 Param Settings CAL Settings OD Settings Verify The functions that can be invoked within this network setup dialog are listed below and will be described in detail in the following Item Purpose Shortcut Parameter Settings This item calls the Master Settings dialog and the CO Busparame
109. ol commands such as sync or freeze from the master to one slave a group of slaves or all slaves at the same time The control commands are based on multicast function This means that slaves with the same group number operate in a synchronized way with each other A slave can belong to several groups You can use the boxes to allocate the group for the slave When this option is activated you get information whether the defined slave really exists max 60 slaves are possible With this function you can define slaves which are not really existant but should be added physically later on If this option is activated a synchronous switching of all outputs in the network for simulation of a time shifted END instruction is possible If this option is activated a synchronous switching of all inputs in the network for simulation of a time shifted END instruction is possible only available for slaves where this function is possible stated at GSD file After having made all the necessary entries the start address for devices corresponding to the I O buffer memory of the master module must be defined in the section Start Adress in CPU Memory The according device range used in the CPU memory is calculated automatically This dialog will match Profibus DP data to PLC devices Addresses in MELSEC CPU Memory Input CPU Device o roo 0 6143 to fios Output CPU Device o 200 0 6143 to 203 Sof
110. on of the connected module by version date and type Cancel Click on tare to leave this dialog without saving any changes in the current project UY v 5 Ko a Software Manual MELSEC ProfiMap Y v 5 D ES e 6 46 Profibus FMS Interface Initial Check Monitor Click on Mmasa to access the Initial Check Monitor dialog This dialog allows you to perform a hardware check of the connected module Perform this test in operation mode 0 Initial Check Monitor No error Meaning Shortcut Start the data transfer for the Initial Check Monitor Leave this dialog in the current project Start Click on st to perform the initial check of the connected module Cancel Click on Mese to leave this dialog without saving any changes in the current project MELSEC ProfiMap Software Manual Profibus FMS Interface 6 47 Trouble Information Monitor Click on Memme to access the Trouble Information Monitor dialog This dialog allows you to read the trouble information buffer from the connected module The connected module needs to be in online mode for this operation The trouble area buffer is divided into eight sections Each section represents a trouble type with the referring trouble subcodes Please refer to the manual of the unit for detailed information on the trouble subcodes Trouble Information Monitor as
111. onitor windows Import Export functions Parameter file handling on floppy disk hard disk Parameter print feature Screen resolution independent Software Manual MELSEC ProfiMap Cc E D OS D Ya E 2 2 Installation MELSEC ProfiMap System Requirements To install the MELSEC ProfiMap software package your computer has to meet the following requirements Minimum hardware configuration mM Pentium PC 60 MHz 16 MB RAM Hard disk with at least 20 MB free space CD ROM drive VGA compatible graphics adapter One serial port for communication with the PLC system 14 35 cm diag VGA monitor Recommended enhancements mM Pentium PC 200 MHz or higher 32 MB RAM 2nd serial port and mouse 1 printer port Printer Software requirements The software is able to run on the following graphical operating systems E Windows 95 E Windows NT V4 0 or higher Copyright IMPORTANT NOTICE This software is protected by copyright By operating the distribution disks package you automatically accept terms and conditions of the Licence Agreement You are only permitted to make one single copy of the original distribution disks for your own backup and archiving purposes Software Manual Installation 2 3 Software installation MELSEC ProfiMap software setup To install the MELSEC ProfiMap software hereafter called MELSEC ProfiMap from CD ROM under Windows 95 or Windows NT you need to have Windows install
112. pter 7 D ego Serial Port Selection Selection of the serial port which will interact with the parameter setting port of the network interface ega MXChange Support Provides a dialog to set up the properties of the MXChange connection MXChange support is only selectable in case that MXChange is installed on the computer or on a LAN connected to the personal computer Coj n GSD Device Database Provides a dialog to access the GSD device database als Export GSD Database The current GSD database of MELSEC ProfiMap can be exported in order that MELSEC ProfiMap installed on a different computer can import the database Export MELSECNET Settings Software Manual Available in future versions MELSEC ProfiMap Menus 3 24 The Menus MELSEC ProfiMap Command Serial Port Selection The purpose of this menu command is to select the serial port of the personal computer which communicates with the network interface This port setting is valid only for direct module access via RS232 422 not for CPU network access The following dialog box appears COM Port1 2 COM Port 2 Cancel The serial port selection will be stored on the hard disk after pressing the mo button The port selection is a global setting and valid at once for all open projects Note Depending on the network interface module different parameter setting cables must be used m For the AJ71M56E
113. rallel unconfirmed services from the partner station Rule Max RAC must be greater than or equal to Max SAC of the partner station Y v D O e E Software Manual MELSEC ProfiMap Y w v D lt O _ E 6 14 Profibus FMS Interface MELSEC ProfiMap Max send PDU H This parameter contains the maximum permissible length of an FMS PDU for sending with high priority on this CREF Rule Max send PDU H must be smaller than or equal to Max receive PDU H of the partner station Max send PDU L This parameter contains the maximum permissible length of an FMS PDU for sending with low priority on this CREF Rule Max send PDU L must be smaller than or equal to Max receive PDU L of the partner station Max receive PDU H This parameter contains the maximum permissible length of an FMS PDU for receiving with high priority on this CREF Rule Max receive PDU H must be greater than or equal to Max send PDU H of the partner station Max receive PDU L This parameter contains the maximum permissible length of an FMS PDU for receiving with low priority on this CREF Rule Max receive PDU L must be greater than or equal to Max send PDU L of the partner station Note f the FMS communication partner does not support the high priority function set the Send and Receive PDU H to 0 The Send PDU H and PDU L values of the master should be less than or equal to the Receive PDU H a
114. rameter settings are equal If the verify function finds differences between the parameters at the network interface module and those in the software a message states which set of parameters are not equal WARNING Do not forget to save your current project under File Save as in the main menu otherwise your new project and your changes made will be lost MELSEC ProfiMap Menus 3 14 The Menus MELSEC ProfiMap Command Open The menu command Open allows to open a project which has previously been saved This command uses the Windows dialog box for file open operation Look in E RSe Projects E ex fe EE a ASeFlowl fms File name Files of type rms Project Files fms y Cancel DP Project Files dp2 FMS Proiect Files fms MMS Project Files mms The Open dialog box lists only files of the type DP2 project of A 1S J71PB92D Profibus DP network FMS project of A 1S J71PB96F Profibus FMS network MMS project of AJ71M56EF2 803 3 MAP3 0 network In case of a DP2 project MELSEC ProfiMap is looking for an EXT project with the same name stored in the same directory In case that the EXT file exits MELSEC ProfiMap searches for missing GSD Database entries of the DP2 project This functionality ensures that any MELSEC ProfiMap V 2 0 PROFIBUS DP project can be opened generated on any other personal computer running MELSEC ProfiMap V 2 0 The shortcuts defined by the
115. re checked against the input limits when leaving the dialog with the a button Additionally the following consistency checks are performed min T_sdr lt max T_sdr a T_qui lt min T_sdr max T_sdr lt T_sl a T sl lt T_tr Note f you are not an experienced Profibus network administrator the Bus Parameters should not be changed except in the following cases more than 15 slave stations are implemented target rotation time has to be calculated again the network consists of more than 1 master target rotation time has to be calculated again Profibus DP and Profibus FMS operation are used in mixed mode FMS parameters have to be defined For the correct parameter setting of the target rotation time TTR t_tr please refer to the Profibus standard DIN19245 part 3 However it is important that the target rotation time is large enough to enable the A 1S J71PB92D to poll each defined slave once per token cycle Software Manual Software Manual Profibus DP Interface 5 13 Download Selection If ProfiMap is connected to the master module via the CPU port or an Ethernet module you have to select a network connection for the download of the configuration data Network connections can be selected from the network database for details refer to chapter 7 Activate the Use CPU Network checkbox in the Master Settings dialog to use a network connection The Select Port button toggles to the Select NW select network
116. riority ength of PDUs receiving aJo Features Supported Displays the hexadecimal feature supported string for this connection Client Features Specifies the kind of supported FMS services and options for the current connection as client Server Features Specifies the kind of supported FMS services and options for the current connection as server OK Leave the dialog and save the data in the project Cancel Leave the dialog without saving any changes in the project Default Software Manual Reset the opened CREF to default values MELSEC ProfiMap Y 2 w u D O e E Ya uv ho fe _ Qa 6 12 Profibus FMS Interface MELSEC ProfiMap Symbol Every CREF has a symbolic name The name consists of a maximum of 32 ASCII characters This name is used to separate the CREFs significantly A name which is unique must be specified here Password The password is a decimal number used for access protection relating to the current connection The default value is O not protected In the case of a station supporting access with password the value of the password received with the service Initiate shall be unique for this relationship This parameter is optional and thus should be left to 0 Access Groups The Access Groups is a decimal number used to specify different groups of connections The default value is 0 The value mus
117. rt end index of the remote static types read only Static Data Displays the start end index of the remote static objects Get Range The Get Range represents the start index and the end index of the remote objects types to get You can select between the start index of the static types and the end index of the objects Start By pressing this button all remote objects types between the selected range will be downloaded The Current Index displays the index of the current remote object type Cancel Click on tea to leave this dialog without saving any changes in the current project MELSEC ProfiMap UY v 5 Ko 6 42 Profibus FMS Interface Remote OD Display This dialog displays the downloaded remote object dictionary The remote objects are displayed including index name depending on the defined Client Features of this connection and object type Detailed information on all entries is displayed by pressing Betas Remote OD Display CREF 02 x Remote OD Header Information OD Version fi Name Length fe Index Name Object Type 1 Boolean Basic Type Object 2 Integers Basic Type Object 3 Integerl6 Basic Type Object 4 Integer32 Basic Type Object 5 Unsigneds Basic Type Object 6 Unsignedls Basic Type Object 7 Unsigned32 Basic Type Object 8 FloatingPoint Basic Type Object 3 VisibleString Basic Type Object 10 OctetString Basic Type Object 14 BitString Basic Type O
118. sage will be displayed Communication Error x E In this case please check the transmission cable and the correct settings of the serial interface Then try the software version function again MELSEC ProfiMap 4 20 802 3 MAP3 0 Interface Button Statistics o Statistics The purpose of this function is to monitor the current layer 2 and layer 4 information of the connected AJ71M56EF2 The following dialog box appears Statistics Monitor A When you select Cancel or press the key then this dialog box will be closed Afterwards the dialog box Monitor Selection will be active If you click on the Star button or press the key the connected AJ71M56EF2 will continuously be asked for the current physical data layer and transport layer statistics information The result will be displayed in the dedicated message areas MAP 3 0 If the serial communication fails the following message box will be displayed Communication Error x Then try this function again MELSEC ProfiMap Software Manual Profibus DP Interface 5 1 Profibus DP Interface Software Manual Parameter Setting for A 1S J71PB92D Introduction and Overview This chapter describes how to generate the A 1S J71PB92D parameter settings After selecting the command New in the File menu see chapter 3 for details choose the module type Profibus DP A 1S J71PB92D from the menu Network Setup Profibus DP
119. set the FDL address among 0 and 126 for a unique identification of the master within the profibus network It states the local address for all CREFs of this station Module Priority Set the module priority for non confirmed services High priority and low priority are supported With selected high priority this master is able to send one request even if the target rotation time TTR has expired With selected low priority this master is not able to send any request after the TTR has expired OK If you select GK all data from this dialog will be stored into the current project and the Master Settings dialog will be closed Cancel If you select ese all data from this dialog will be restored to the previously defined values and the Master Settings dialog will be closed Default If you select asw all changes within this dialog will be lost Be careful The data will be restored to the default values Ya uv ho fe _ Qa MELSEC ProfiMap Software Manual Profibus FMS Interface 6 5 Bus Parameter If you select _BusPaan the bus parameter dialog box is displayed This function allows to select the baud rate and to modify any parameters like timeouts which are related to the baud rate The last settings made are stored independently for each baud rate so that by selecting a different baud rate these settings are shown again Select Baudrate 8 60 Kbps y m Profibus FDL Parameters Slot Time T_sl
120. sfully MELSEC ProfiMap Menus 3 10 The Menus MELSEC ProfiMap Button Write to A 1S J71 The purpose of this function is to download the generated parameter set to the network interface module To start this function press the Ewean button Only for an FMS project you can additionally specify the items to be transferred Write to A 1SW71PB96F When Cancel is selected this dialog box will be closed To start the download operation click on the 9K button or simply press EJ The download operation will be started if there are no errors If the network interface does not respond the following dialog box appears Communication Error x If the serial port is not configured the following dialog box appears Communication Error xf x Software Manual The Menus 3 11 When the configuration software detects that the network interface module is write protected the following message appears AJ71M56EF2 AJ71M56EF2 is write protected Please set dip switch 1 and 2 to right position A 1S J71PB96F A 15 J71PB96F is write protected Please set rotary switch to position 1 A 1S J71PB92D NO message If there is a positive response from the network interface module the writing operation starts and the following status window appears Actual Status 0 100 The bar graph informs you about the current status of the download operation When you click on the case
121. t be binary interpreted There are eight different access groups supported This parameter is optional and thus should be left to 0 Local LSAP Specify the Local Link Service Access Point of this station used for the communication of the current CREF Valid values are O to 63 for SAPs and 128 for NIL This parameter is unique for MMAC connections but must be equal to the Poll List SAP for MSxx D connections Remote Address The Remote Address specifies the FDL address of the remote station for this CREF If the value 255 is set all stations in the FMS network are selected one to any otherwise the connection type is one to one Remote LSAP Specify the Remote Link Service Access Point of the remote station used for the communication of the current CREF Valid values are O to 63 for SAPs 128 for NIL and 255 for all For the connections with connection attribute D the remote LSAP must range within 0 63 Connection Type The Connection Type specifies the kind of this communication relationship Valid values are MMAC for acyclic master master data transfer MSAC for acyclic master slave data transfer without slave initiative MSAC_SI for acyclic master slave data transfer with slave initiative MSCY for cyclic master slave data transfer without slave initiative MSCY_SI for cyclic master slave data transfer with slave initiative BRCT for broadcast communication master to all others MULT for multicast communication master to
122. ted The selections to be checked depend on the used network interface Additionally you can indicate the position of the printed header on the page top or bottom If you select No header the header information will not be printed The project header belongs to the project and is saved in the project file Page Setup cd cd M v 9 s 2 ProfiMap Sample Project A cancel Project Select The pull down menu shows you the last four used projects You can open one of them by pressing the shortcut 1 to 4 or selecting it with the mouse cursor MELSEC ProfiMap Menus 3 22 The Menus MELSEC ProfiMap Command Exit You can use this menu command to quit the software If anything in the current project has been modified and has not yet been saved the following message appears MELSEC ProfiM ap x If you want to save the last changes before leaving this software choose If you choose Mw all modifications are lost Software Manual Setup menu O View Window Help Network Download Settings Ctrl D Serial Port Selection Ctrl E MxChange Support Ctrl M GSD Device Database Ctri G Export GSD Database Export MELSERHET Settings In the Setup menu you select the following menu commands Command Purpose The Menus 3 23 Shortcut Hotkey Network Download Settings Provides a dialog to select and setup a network connection setting from the network database for details refer to cha
123. ter Settings dialog CRL Settings This item lists all defined CRL entries used to append delete and change a CRL entry parameterize the CRL header support lar jic online check of all CRL entries OD Settings This item lists all defined FMS variables used to append delete and change a variable set the start index of the local lar Jo OD call the structure dialog Remote Mode This item supports the reading of the remote OD of the ae selected Ghee 3 18 This item offers a choice of monitor options Car Jm Monitor Read from A 1S J71 This item downloads the module configuration from the coef network interface module into the current project LJ Write to A 1S J71 This item uploads the module configuration from the current oo project into the module Verify This item checks the current project against the module ajy configuration online Y uw v D lt O _ E MELSEC ProfiMap Software Manual Profibus FMS Interface 6 3 Button Param Settings FOL Click on Basm setings to start the Master Settings dialog needed to generate the A 1S J71PB96F parameter settings The Master Settings dialog box contains the following items Module A 1SH71PB96F Revision Vendor MITSUBISHI ELECTRIC CORPORATION fpe Name FMS M aster Baudrate 500 0 Kbps y FDL address fo 0 126 Module Priority C high low _ Cancel Default Bus Param
124. ties S earch Change Network Symbolic Name Network Connection No 1 Search Network by Symbolic Name Network Connection No 1 y Choose Network by Number 0001 y Down U o Up Parametrize CPU Network wr Parameter Name Value Setting Comment Network Settings ea m e 3 Db Z Software Manual MELSEC ProfiMap fea a _ O 3 Y Z 7 4 Network Database MELSEC ProfiMap Item Meaning Shortcut Change Network Symbolic Name Change the name of the selected network connection index aJs Search Network by Symbolic Name Search for a network connection index by name cga Chose Network by Number Chose a network connection index by number LJ Down Switch network connection index number down LJ Up Switch network connection index number up Jy Parametrize CPU Network Displays various parameters of a defined network connection The parameters displayed depend on the selected MELSEC unit and network connection LJ Define Define the selected network connection index nn Clear Clears a defined network connection index ne OK Leave this dialog and save all data from this dialog in the network database Cancel Leave this dialog without saving any changes in the network database Test Test the network connection settings online Sof
125. tion Settings dialog where you can set the FMA7 connection specific parameters When the FMA7 connection is to be used the maximum number of CREFs that can be set in the CRL is 31 The number of the FMA7 CREF is fixed to 1 m CRL Header Settings Poll List SAP o 0 2 50 128 Ass Abt Cl 2096 10 msec FMA FMA7 Connection Settings CREF 01 Max Send PDU low 241 0 241 Max Receive PDU low 241 0 241 Cancel Default Item Meaning Shortcut Max Send Maximum permissible length of PDUs sending low PDU low priority Lais Max Receive Maximum permissible length of PDUs receiving low PDU low priority LJE Max Send PDU low This parameter contains the maximum permissible length of a PDU for sending with low priority on this CREF Max Receive PDU low This parameter contains the maximum permissible length of a PDU for receiving with low priority on this CREF MELSEC ProfiMap Ya uv 2 Oo fe i a Ya uv ho lt fe _ Qa 6 22 Profibus FMS Interface MELSEC ProfiMap Button CRL Check This function checks online all defined CREFs displayed in the CRL static Entry Setting In order to ensure correct operation it is essential to download or verify the PROFIBUS FMS parameters to the A 1S J71PB96F before selecting this function Otherwise wrong test results are displayed in the column State in the dialog box CRL Stat
126. tware Manual Software Manual Network Database 7 5 Defining a CPU port network connection Select a network connection index to be defined either by symbolic name or by number The default names of undefined network connections are Network Connection No x Network Connection No 1 ction No 1 TEREA Connection No 2 Network Connection No 3 Network Connection No 4 If you have selected an undefined index the Den button becomes active Click on the Bane button Select the MELSEC unit your PC is connected to You can either access the PLC via the CPU port with a special serial programming cable or via an Ethernet board Below the serial connection is selected Unit Selection Qn CPU RS 422 CPU port 7 O A CPU RS 422 E port Select the MELSEC network across which the host CPU of the PROFIBUS master module can be accessed The PROFIBUS master module can either be installed together with the target CPU on the same rack or on a remote CPU rack accessible across MELSECNET 10 Below the local installation is selected Network Selection ction connect via Qn CPU RS 4 422 O None local CPU is the PB92D aa R neem al CPL is the MELSECNET 10 PB92D is in remote CPU Rack er CPU Rack o _ toca The CPU port network connection is defined using default values Now you can edit the values directly in the network properties table Network DB MELSEC ProfiMap Network DB
127. tware Manual Software Manual Profibus DP Interface 5 19 Extended User Parameters The user parameters for the slave device can be defined individually In case that the products GSD file supports extended user parameter click on UserParam to access the following dialog box Extended User Parameters E ES ur Parameter Name Diagnosis at short circut repot Averaging on Operating mode Input Channel_ 410V n 10 Diagnosis at short circuit Zona Byte swamping heo sel value 0 EN MT 4AD The Extended User Parameters are not standardized but depend on the slave The purpose of the user parameters is to parameterize the individual slave For example the slave is an analog input device and the operating mode of the input channel is to be parameterized by the startup of Profibus DP Then you can specify this operating mode here Click on the value setting if you want to change and select the desired setting All supported settings are displayed in clear but can also be changed within a simple hex editor If you prefer to edit unsigned integer values as hex values check the box The width of the columns can be varied by placing the mouse pointer between two table headings until it changes to a double arrow and then clicking and dragging to the left or to the right MELSEC ProfiMap a a a v 5 D 2 g a a v 5 D 9 5 20 Profibus DP Interface MELSEC Pr
128. ype dictionary By default the structure types are not defined The maximum number of supported structure types is 32 For further information see the Profibus Specification EN50170 volume 2 page 190 Click on Swe to access the Data Type Structure List dialog Data Type Structure List Data Type Data Type Data Type Data Type Data Type Data Type Data Type Data Type Data Type 4 Defined MELSEC ProfiMap Y v 5 Ko Y w v D lt O _ E MELSEC ProfiMap 6 28 Profibus FMS Interface Item Meaning Shortcut First allowed index of variables Display the first possible index of variable objects read only Number of defined structures Display the current number of defined structures read only Current OD index to edit Display the index of the current structure Define Undefine Structures Enable sheet OK Leave this dialog and save all data from this dialog in the current project Cancel Leave this dialog without saving any changes in the current project Undefine Undefine the current structure First allowed index of variables The displayed value is the first allowed index for the object dictionary read only Number of defined structures The displayed value presents the current number of defined structures read only Current index to edit The displayed value presents the index of the current stru

ProfiMAP - Software Manual 65778-C (12.99)

Contents

Download Pdf Manuals

Related Search

Related Contents