EmbroideryStudio e3.0Q Software Update
Contents
1. ffi e lo Import Graphic Scan Graphic Export Multi Decoration Files S Record in Database Capture Design Bitmap Capture Virtual Decoration Bitmap send via Email Send to Machine Manager Send to Stitch Manager Send to Connection Manager d d Ept fa H Ca Sail M t Sail E B ge e e de F d w LL Embroidery Disk i Cross Stitch Exit Alt F4 Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 14 CSV output The CSV output file includes the following fields The first group derive from the Design Properties gt Information tab The next group derives from parameters entered in the Machine Runtime Settings dialog Field Design properties Date File name Machine format Stitches Colors Color changes Stops Trims Sequins Blings Thread length m Height mm Width mm Area mm Runtime data Below Above Machine Normal high speed RPM Slow speed RPM Slow above mm Trim time sec Color change time sec Stop time sec Design start time sec Design end time sec Runtime min sec Description Data derived from design properties Date and time of exporting properties Name design saved under Machine format of design Total number of stitches in design Total number of thread colors in design Total color changes may or may not coincide with number of colors Number of machine stops in design Number of trims in desi2. End xi Maximin stitch Thread chark type Total thread Total bobbin Machine runtime The Machine runtime checkbox is only available if the feature is available in the software If there are no machines set up checking Machine runtime has no effect as there is nothing to print Total thread prints the information of the same name in the Design Properties dialog This information is included in both Production Worksheet and Production Summary Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 16 ES Wilcom EmbroideryStudio Designing bike cafe offsets Tajima Production Worksheet TU i a ign bike cafe offsets Machineformat Tajima Color changes 5 Stops 6 Trims 18 Auto fabric Pure Cotton Required stabilizer Topping Backing Tear Awayx 2 87 7 mm 166 2 mm 30 7 mm 100 1 mm 131 6 mm Area 33209 4 mmf ax stitch 9 mm Stop Sequence St Code Description Brand 1 28 E 3003 28 Sea Green Wilcom 33 Chartreuse Wilcom 28 Sea Green Wilcom 6 31 O 2957 31 Mint Green Wilcom Thread usage N Description Length 28 Sea Green 43 09m 9 Orange 1 99m 35 Munky Green 58 70m 33 Chartreuse 13 91m 31 Mint Green 10 11m Machine runtime Machine Runtime min sec Machine 1 33 02 Interface amp usability improvements ES e3 0K includes the following interface amp usability improvements Ruler display Inch rulers are now displayed in 1 16 1 8 2 and 1 divisions not 1 10s The grid siz
3. ILCOM ELEMENTS with COREL Wilcom EmbroideryStudio e3 0Q Software Update 26 March 2014 This file contains notes on the Wilcom EmbroideryStudio e3 0Q software update This update is intended for installation with any released version already installed of Wilcom EmbroideryStudio e3 0 It contains all improvements and fixes contained in other interim updates including e3 0H and e3 0K Note Administrative privileges are required to install the software update If you are installing to a corporate network an administrator password may be required during update installation Contents NEW 6 improved teatures IES GO OO acdsee cate a E E odeesdenddesesecedllegsatse 2 System IMPPOVE MEMS seeiis nn EAE Ea AREE EEEE EESE EE EEEN EERE EEE AEAEE 2 LC CHIAG IMD OVEMOI creian a I A E E EET E T 2 Digitizing improvements ccccceeccccsssceeccesececceuseeessusececsaeeceseuseeesaugeeessauseeessaseeessaseeessageeeeseeeesssaseeessueeessaneeesseaes 4 Sequin improvements eg 25 ac dicindteccetnesteenictrcin Seadaccsjiacwsuioridie oartannsieiod ulesindieeidreninsld adieu dleaaeicenidaed aincndieclisiseudeeeelnnenenauiociiidadaneedaciuneniteoucnent 5 CUO UU WIAD EO VW CNC ANS ee estonestencenactencdcceasacadteendocaetsenicacttenacegotsanaieteseeevassaansuet EE e Ei EEEE 6 ROG STN SS researc cece a A rcs ecb EE E E A E E E O 7 Korean language SUDPOMT sccccccseeececeeeseeeceeeeeeseeseeeeseseeeeseeeeeeseaseeeesaaeeesseaeeeessaeeessaeeeeseeee
4. di Haspload 7 Click OK when complete The new machine will appear as a Quick Access button on the Standard toolbar Send to Happy 1 Send the current design directly to Happy 1 Press lt F1 gt for more help 8 Click Send to send the currently open design to the specified machine folder Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 28 A confirmation message Is displayed Design sent to Happy 1 Setting up additional connections 1 Click the Connection Manager icon on the Standard toolbar Alternatively select Setup gt Connection Manager Setup If a connection already exists the Send to Connection Manager dialog opens Send to Connection Manager Design name SequinFillReshape Connection Machine Folder Options 2 Select Setup Connections The Connection Manager Setup dialog opens Connection Manager Setup Connections Machine Folder 3 Click Create The Connection Settings dialog opens Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 29 Connection Settings Connection Type icodaears Folder Name Machine Folder Machine folder connection File type Tajima DST Folder location Rotate design by 180 on output Browse 4 Repeat steps outlined above to set up another machine connection As more machines are created more quick access buttons are added with unique colors for each EET T E A single
5. follows Korean stroke rules Also e All characters are satin stitch Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 e Embroidery stitch direction is the reverse of character process direction These issues have been addressed with the current release Stitching Korean letters with turning fill style Korean TTF conversion fails to stitch some letters with a turning fill style i e conversion produces Tatami Complex Fill objects This issue has been resolved Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 New amp improved features in ES e3 0K The main purpose of the e3 0K software update is to provide runtime estimates for stitching designs on specified machines Runtime analyst feature The Runtime Analyst calculates the estimated running time for a specific embroidery file on an embroidery machine using specified RPM values and other runtime parameters These are used on a design by design basis to determine scheduling running costs and calculate payments for production staff Output can be used by any third party software such as ERP and accounting systems Typical usage Information can be made available to various stakeholders for payroll estimations and scheduling For instance e The designer creates a new design and saves as EMB and or stitch file such as U11 e EmbroideryStudio automatically calculates running time e The designer saves or the system automatically saves calculated result
6. improved features in ES e3 0Q The main purpose of the e3 0Q software update was to repair a number of system issues This update also provides better Korean language support as well as improved EmbroideryStudio e3 Lettering amp Editing functionality A number of other issues have been resolved for sequins file output and object property handling System improvements ES e3 0Q includes the following improvements to system performance Writing Defaults file A number of cases have been reported where EmbroideryStudio has encountered problems writing the defaults file A Can t write the Defaults file warning message appears and ES becomes disabled This issue has been resolved Extended use Problems have been reported when leaving EmbroideryStudio running overnight Upon trying to open a design the next day the application becomes disabled This issue has been resolved Machine Format Settings missing units Some units of measurement are missing in the Machine Format Settings dialog This issue has been resolved Machine Format Settings TTFConversion Standard Machine type Barudan FOR IT Lockstitch Format name Barudan FDR II Lockstitch Comment Maximum stitch Minimum stitch Maximum jump Lettering improvements ES e3 0Q includes the following improvements to embroidery lettering functionality Teamname Matrix for EmbroideryStudio e3 Lettering amp Editing The Teamname Matrix feature is now available in
7. needle height Background preview in New from Template Object scaling width and height values Happy machine hoop display Resolution When a Satin or Raised Satin outline object with Calligraphy applied is rotated and entry and exit points are changed the stitch angle of the object does not reflect the original orientation of the object This issue has been resolved The Needle Height controls in the Compound Chenille Effect dialog were not working properly This issue has been resolved When selecting a fabric in the New from Template dialog the background preview panel continues to display some background color behind the fabric This issue has been resolved When resizing an object via selection handles the Width and Height values appearing in the resize tooltip were out of sync with those of the Property Bar This issue has been resolved Happy machine hoops appear in the software to be smaller than actual size This issue has been resolved If you encounter a problem with the EmbroideryStudio e3 0K software update refer to the following sources for help Wilcom EmbroideryStudio e3 0 User Manual select Help gt User Manual Wilcom EmbroideryStudio e3 0 Onscreen Help select Help gt Onscreen Help Windows help select Start gt Help and Support Windows manual documentation supplied with your hardware If you are unable to solve a problem you should contact your Wilcom dealer Before seeking help
8. EmbroideryStudio e3 Lettering and Editing products Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 2 Hoop width 400 0 Team names 7 Output files 4 Sequence wr v Minimize color changes 4 A TE 4 bog Auto Letter Spacing for EmbroideryStudio e3 Lettering amp Editing The Auto Letter Spacing feature has been added to EmbroideryStudio e3 Lettering amp Editing products This feature is important for naming customers E Auto letter spacing 2 8 Hmm o n Letter spacing table i2 Fl amea Imm 0 0 0 0 Auto kerning lt Kerning table Gmm O O O O 0 SEQUENCE Hmm O O O O O O TrueType Font conversion TrueType Font conversion has undergone a general improvement in the way fonts are converted to embroidery patches decomposition This applies to all character sets Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 3 Conversion of multi line paragraph text Several problems have been reported with the conversion of TTF text CorelDRAW multi line paragraph text is not converting properly to embroidery Also problems have been reported when converting paragraph text with center or right justification These conversion issues have been resolved Conversion of multi line _ paragraph text embroidery Try increasing font size or try converting directly from the EmbroideryStudio Object Properties gt Lettering tab Digitizing improvements ES e3 0Q includes t
9. Gjem po Em Stitch spaci C Je gt B00 mm Pull compensation 0 40 New from Template dialog Currently the last chosen template is not remembered in the New from Template dialog It always appears with the Normal template selected This issue has been resolved Hew from Template Template MyTemplate 4 Auto Fabric Use auto Fabric a Pure Cotton Required Topping stabilizers Backing Tear Away x 2 Background amp display colors Machiweformat Tajima Show this dialog on startup Reactivate From Options dialog Lettering improvements ES e3 0K includes the following lettering improvements Offset outlines with Kanji lettering DS now provides the ability to apply offset outlines to Kanji characters as part of a lettering object Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 21 Preview of fonts in lettering properties Previewing fonts in lettering properties can cause ES to unexpectedly shut down This generally happens if there are a very large number of TrueType fonts installed in Windows This issue has been resolved YT Impact th i Imprint MT Shadow mprint MT Shado Fp tris UPC IrisUPC Tr Iskoola Pota Iskoola Pota a Tp Jasmine UPC Jasmine UPC x Available stitch types for lettering and branched objects There are inconsistencies between stitch types available for lettering and branched objects on the toolbars and those displayed in the Object Properties di
10. alog This issue has been resolved Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 22 Object Properties A Underlay Connectors RH Pull Comp Bling Run 3 Bling Fills wr Special gt Fills h Outlines Stitch Types Program Split Coil Straight Adjust 90 Settings Satin coun Adjust 1 Auto split Length 7 00 Min length 0 40 Stitching amp color improvements ES e3 0K includes the following stitching and color improvements Sequin fixing stitch previews Sequin fixing stitch preview were incorrect for A01 4 A02 8 A03 4 and A04 6 These have now been fixed Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 23 Object Properties Es i Seguin Run Fi Underlay Connectors ii Pull Comp Bling Run 22Bling Fills wr Special 4 Fills h Outlines E 3 Sequin Layer Spacing Size Margin Fixing Positioning Fixing size Match sequin Set manually Orientation Stitch lengths Min 2 00 mm Run aoo mm Max eon mm Save Slant angle of zigzag underlay The slant angle of zigzag underlay defaults to 30 when opening an V2006 or earlier EMB files in e3 This can cause the underlay to extend outside the boundary With e1 5 and e2 0 the slant angle correctly defaults to 90 This issue has now been resolved for V2006 and earlier Color assignment with Fill Holes After applying Fill Holes to an obj
11. as been resolved TvFL bOR EDAD Tee lala EMA YS Tab LAU ARR IS T4MocheOs os ALET EELEE he Machine Manager in Japanese Machine Manager is not working in e3 Japanese This issue has been resolved Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 18 Sr JE FED Fem aaa ae EW APA etj alex E m a Barudan RPM D wh hA r Schiffli toolbar Borer Depth display The Schiffli toolbar does not show correct Borer Depth when traveling through stitches in ES e3 This issue has been resolved Garbage characters in Japanese menus Garbage characters are appearing in menus in e3 Japanese when using WinXP This issue has been resolved Photo Flash and Auto Digitize Bitmaps If the Auto Digitize Bitmaps Element is disabled the Auto Digitizing Tools flyout is not available on the Toolbox toolbar This means the Photo Flash icon is not available even when the Element is enabled The Photo Flash tool is now correctly displayed when enabled Photo Flash Create whole embroidery designs from photographs Press lt F1 gt for more help Thread amp fabric improvements ES e3 0K includes the following thread and fabric improvements Access to Manage Thread Charts dialog The Manage Thread Charts dialog is now directly accessed via the Setup menu along with other asset management functions Previously it could only be accessed indirectly via the Thread Charts dialog Wilcom EmbroideryStudio e3 0Q Softwar
12. been resolved When creating an applique object from a combined vector object covering stitches for the hole were positioned on the wrong side for appliqu and had to be manually fixed by swapping Inside and Outside values This issue has been resolved Resolution The Color Palette Editor dialog was slow to respond during thread assignments involving a large number of colorways e g gt 50 This issue has been resolved Colorways available from the Color Palette popup menu showed all colors in the palette whether used or not Now only colors used in the design underlined in blue are displayed If no color is currently being used no colors appear in the combo only the name and background The number of colors visible in the colorways popup menu has been increased as follows e Maximum number of used colors shown has been increased from 8 to 16 e The number of colorways shown at any one time has increased from 4 to 6 The list can be scrolled to reveal more colorways if available Resolution Previously the very first time ES was started an Error Access Denied message was displayed This issue has been resolved software crashes were reported when using the Flatten shaping tool with embroidery objects This issue has been resolved Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 31 Miscellaneous Solving problems Problem Rotating objects with slanted satin Compound Chenille
13. check that your PC meets the system requirements and check the Troubleshooting chapter of the User Manual Copyright Copyright 1990 2014 Wilcom Pty Ltd All rights reserved No parts of this publication or the accompanying software may be copied or distributed transmitted transcribed stored in a retrieval system or translated into any human or computer language in any form or by any means electronic mechanical magnetic manual or otherwise or disclosed to any third party without the express written permission of Wilcom Pty Ltd A B N 62 062 621 943 Level 3 1 9 Glebe Point Rd Glebe Sydney New South Wales 2037 Australia PO Box 1094 Broadway NSW 2007 Phone 61 2 9578 5100 Fax 61 2 9578 5108 Email wilcom wilcom com Web http www wilcom com TrueView and Point amp Stitch are trademarks of Wilcom Pty Ltd Portions of the imaging technology of this Product are copyrighted by AccuSoft Corporation The EPS File Import Export Converter used in this Product is copyrighted by Access Softek Inc All rights reserved Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 32 Contact If you have any questions please contact your local Wilcom dealer or distributor in your country Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 33
14. click on a machine quick access button will send the current design to the predefined location for the selected machine Other improvements The e3 0H also includes the following fixes and improvements Multi language issues Problem Multi language GUI problems My Product for multi languages Capture Design Bitmap in French German translation of Application Fabric dialog New from Template fabric selection Fabric selection in non English languages Lettering issues Problem Complex Fill TTF Wilcom EmbroideryStudio e3 0Q Software Update Resolution A number of problems were reported with regards to truncations and faulty message strings in languages other than English These have been resolved Previously clicking an element on left hand pane of the My Product dialog when switched to languages other than English did not load the corresponding page This issue has been resolved If running ES in French language the Capture Design Bitmap dialog crashed the system This issue has been resolved The Application Fabric dialog title has now been correctly translated as Applikations Stoff some fabrics could not be selected in the New from Template dialog when switched to languages other than English This issue has been resolved Fabrics displayed to the user in non English language did not match the translated fabric selected This issue has been resolved Resolut
15. d in Connection Manager Setup or Embroidery Machine Connection dialogs Machine runtime settings Click Create to access the Machine Runtime Settings dialog Machine Runtime Settings Machine Name Comment Runtime parameters Normal high speed Slow speed Slow above Trim time Color change time Stop time Design start time Design end time Parameters set here are based on metrics gathered both from machine specs controller and or empirical observation Parameter Description Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 11 Name May pertain to a particular machine or a class of machines The class may be based on machine model However different machines of the same model may be set up for different purposes e g to run at different speeds If so you ll need to set up different classes to suit Normal high speed Defines the speed at which the machine normally sews Normally available from machine specs Slow speed Defines the slowest speed at which the machine runs Normally available from machine specs Slow above Defines the length of stitch above which the machine slows down This value is automatically adjusted according to speed settings in particular slow speed It should be available from the machine specs Trim time The time the machine takes to perform a trim May be available from machine specs or empirical observation Color change time Same as for Trim time Sto
16. e Update 26 03 2014 19 Options Manage Auto Fabrics Manage Styles Thread chart Threads Royal Convert TrueType Font Calibrate Screen Hardware Setup Connection Manager Setup Tablet Setup scanner Setup Bling Machine Setup Machine Runtime Setup Security Device Setup Madeira color palettes Description White Light Beige Yellow Beige Green Gold Green Gold Green Gold Lemon Yellow in column Code Madeira color palettes have been updated and now include all the latest threads The new PolyNeon palette is also included Thread Charts Active thread charts I Kingfisher Card 202 E Kingstar F Macpherson Vital Link Rayon Madeira Burmilana Madeira Classic 40 Madeira Frosted Matt 40 Madeira PolyNeon 40 E Marathon Metter Poly Sheen numericalUpdated Pull compensation fabric settings There is a rounding issue with pull compensation settings values that should be 40 appear as 39 Also the pull compensation unit is missing in all tabs except Stablizer in the Auto Fabric Settings dialog These issues have now been resolved Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 20 Auto Fabric Settings Custom Pure Cotton Tatami Program Split Fill Wide Satin Narrow Satin Lettering Stabilizer Stitch length 400 Stitch spacing 0 40 min Underlay type Edge run Tatami Layer 1 Laver 2 Stitch length 20
17. e can be set in decimal inches now This is usable as is a eS E ET ore rel Shes NO e110 1 gt dl SS Mea eee eT SSR So 7 y 2 7 H4 i 1 4 er Ad i x Rts Sire Si a Bie opi rs TD SA A Transformation amp measure tooltips Unit of measure displayed in the Resize tooltip can now be chosen by the user Similarly distance moved e g moving letters is now displayed in appropriate units Similarly Length and Angle labels have been added to the Measure tooltip together with the appropriate length unit Length 0 40 in Angle 33 68 Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 17 Travel tool keyboard shortcuts Travel Tools Flyout All Travel tools now have keyboard shortcuts New shortcuts include e Travel by 1000 stitches Shift Num Shift Num e Travel by Function Ctrl Page Up Ctrl Page Down e Travel by Trim Ctrl Left Arrow Ctrl Right Arrow Ctrl M shortcut for Auto Trace The Ctrl M shortcut is not correctly activating Auto Trace This issue has been resolved Appearance tab in Carving Stamp docker The software crashes on closing all open windows when the Appearance tab is selected in Carving Stamp docker This issue has been resolved Softened stamp Raised stamp Other Objects option in Save to Template dialog The Other Objects option is missing in the Save to Template dialog in languages other than English This issue h
18. ect with holes changing color of the source object incorrectly changes the color of the fill object Also vice versa This issue has been resolved Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 24 File handling improvements ES e3 0K includes the following file handling improvements Using ZSK TC format in Export Multi Decoration Files Clicking Options when using ZSK TC format in the Export Multi Decoration Files dialog crashes the software This issue has been resolved Export Multi Decoration Files Objects Export current design Export selected objects only Elements Embroidery 25K TC 277 wv Options Print CDR CorelDRAW cdr Applique shapes O8F AutoCAD dxf v Bling AI Adobe Illustrator ai Bling output Multiple files Single File File Locations Export to set locations Export to C Documents and SettingstamatsumuraiMy Documents yMalti de Browse Design name My Template Design Explorer and DesignWorkflow file display Currently DE and DW do not display Barudan U files at all This issue has been resolved Saving single sequins When saving a single sequin created by Sequin Run Manual or Sequin Run Auto to any file format results in the sequin being lost upon reopening the design This issue has been resolved Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 25 Missing formats in ES TrueSizer can open and save some f
19. es Incorrect thread and bobbin length values have been reported in the EMB file properties display in Design Explorer This issue has been resolved Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 7 i Creativity Freehand EMB Properties Property Content Version e3 Machine Tajima Stitches Colors Color Changes Stops Trims Objects Thread Length 48 23 m Bobbin Length 18 70 m Max Stitch Length 12 00 mm Min Stitch Length 0 07 mm Jump Length 6 90 mm Description Title Creativity Freehand Authors Tags Remove Properties and Personal Information Design preview in Windows Explorer When a design is saved in EMB e2 or earlier version in ESe3 the version number is displayed in Windows Explorer as 3 0 This issue has been resolved Thread length values in EMB file in DW DE There have also been reports of thread length values in EMB file changing to either 0 or negative values in Design Workflow and Design Explorer This issue has been resolved Korean language support ES e3 0Q includes the following improvements in support of Korean language Korean language resources added to software Korean language resources have been added to the latest software installation Quality of Korean TTF conversion to embroidery The quality of conversion of Korean TrueType Fonts to embroidery has been improved with better detection of shape cuts and embroidery patches that support Korean unicode characters Conversion now better
20. eseeeeessaneeessanseeessags 8 New amp improved features in ES e3 0K 0 00 cceccccccccseeeeeeeeeeeeeceeeeeeeeseeeeeseeeeeeeessaeeseeeesseeseeeeesseaseeeeeseaeseeeessaaeeeesesaaees 10 Runtime analyst feature 0 0 ccee cece ce eeeeeeneeeeeeseeeeeeeeeseeeeaeaeeeeeeaeeeeseaseeesseeeeesaaeeeeseaueeessaaeeessaeeesseeeesseeeeesseneenens 10 Outputting design information ccc wat cee ae cst cele ntina nee SaalncdteratdiaceSrleianasdeicas elSnt paalncdenldecisaclahineddande eau eeawnddtenbeedeseeans 13 Interface amp usability improvements cccccccesscccceescecceesececceececceuseeeceuseeessaueeecsaueceeseuseeessegeeessagseeeseeeesssegeeeess 17 Thread Sfabnie IMP OYE MEN S srie E EE EENE 19 Letenng NANO CN GINS nena ciriuseetenesasn pn eS RA e SETE E 21 Stitching amp color improvements cccccceeeeceeecseeeeeeeecaaeeceeecaeaeeceeeceeeeeeeeesseaseeeeesseeseeeeesuaaeeeesssaaeeeeessaageeeesssagess 23 File pancing IMProve menis seyrini a E ER ROERE 25 New amp improved features in ES e3 0H cccccccccccssssceecceeeseeceeeeeeeseeeecaaeseceeeseeaaeeeeesseaeeeesssaaeeeeesseaaeeeeeseaeeeeseseaaaes 27 Updated Connection Manager cccccccsesseccccceeeceeeeeeeeceeeeeeeeeseeeceeeeessaeeeseeceeeeeeseeeeeeeeeeeessseeaeeeeeesesssusaeeseceeeeseaaas 27 UMN MIMD OVEN ING araok E E AT E E E tsaysnctete cto conse E E E 30 GOVINO OCHS sariei ia aE ER a E E A E E E E E E ER 32 CODON aeae i E EE EE E EEE E EE E E neneenneaeeeoas 32 New amp
21. gn Number of sequins in design Number of individual rhinestones in design Total length of thread used in design Height of sewing area derived from design extents Width of sewing area derived from design extents Area covered by design calculated according to design extents Data derived from machine runtime settings Number of stitches stitched at slow and high speed according to slow above parameter Combined numbers should equate to Stitches value Machine as shown on Machine Runtime Setup dialog If there are multiple machines defined a separate line entry appears for each Runtime setting as shown on Machine Runtime Settings dialog Ditto Ditto Ditto Ditto Ditto Ditto Ditto Calculated runtime of this design according to particular machine as shown on Design Properties gt Runtime tab If there are multiple machines defined a separate line entry appears for each Printing of runtime estimates amp design area The Production Worksheet prints the new runtime information Three new fields to control the new information appear under the Blocks tab Area Total thread and Machine runtime Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 15 Print Options worksheet by pe Customization options Approval Sheet General Barcode Colorways Zoom Desien Info Blocks roduction Worksheet v Production Summary LeFt right upfdown 4 Color Film
22. he following improvements to embroidery digitizing functionality Conversion of vectors to embroidery There have been reports of software crashes occurring when converting certain vector designs This issue has been resolved Curve edge smoothness Problems have been reported with the relative smoothness of curved edges The sample shows Input C and Input A with very high stitch density so the edge line can be clearly seen This issue has been resolved Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 Sequin improvements ES e3 0Q includes the following improvements to sequins Changing Sequin Run Manual fixing type for a single sequin System crashes have been reported when changing fixing types for single sequins created with Sequin Run Manual This issue has been resolved Visual feedback when moving sequins with Sequin Edit Misleading visual feedback when moving sequins using Sequin Edit tool has been fixed with this release Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 Output improvements ES e3 0Q includes the following output improvements Rotate design 180 on output for cap applications Connection Manager now provides the ability to optionally rotate design 180 on output for cap applications Connection Settings Connection Type Machine Folder Name Machine Folder Machine folder connection Rotate design by 180 on output A Rotate design by 180 on outpu
23. ion When converting letters with holes such as the registered trademark character 26 03 2014 30 conversions Unwanted Wingdings in text field Layout names Team Names options when sending via Connection Manager Auto digitizing issues Problem Converting embroidery to graphics Appliqu covering stitches when converting vectors Thread related issues Problem Assigning threads to colorways Only used colors displayed in colorways Improved colorway popup display System related issues Problem Access denied when starting software Software crashes with Flatten tool strokes inside the outer ring were not always properly generated This issue has been resolved Characters entered into the text field sometimes appeared as Wingding symbols even when a Wilcom alphabet was selected This happened after digitizing lettering with Webding and Wingding alphabets This issue has been resolved Teamname layout names did not always appear in the Teamname Layouts dialog sometimes the name fields appeared blank This issue has been resolved Problems were reported when selecting Team Names options when sending designs via Connection Manager This issue has been resolved Resolution Previously Convert Embroidery to Graphics did not always convert selected embroidery to vectors When it did convert a ghost image of the embroidery could still be seen after conversion to graphics These issues have
24. nformation Stop Sequence Design name Creativity Custom Splits Native design Version eJ Machine format Tajima Stitches 13079 Trims Color changes 5 Objects Colors 6 Maximum stitch length Stops 6 Minimum stitch length Total thread 66 00 m Jump length Total bobbin 23 19 m Sequins sala Auto fabric Required stabilizers 123 7 mm 118 3 mm 14629 1 mm From start point Left 61 8 mm tj 61 8 mm Lp 59 1 mm 59 1 mm 0 0 mm 0 0 mm Outputting design information Design information including runtime estimate and relevant parameters can be output to CSV file for later use by third party applications New data is appended to any existing CSV file Predefining export options Design information can be written whenever the design is e recorded into DW database Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 13 e saved A new Options gt Export tab allows you to preset these options Design properties file name C Users Documentation Documents DesignProperties csv Export design properties automatically On record To Database On save Manually exporting design properties The new File gt Export Design Properties command allows you to manually save current design properties ie F New Ctrl M New from Template Open crl o k Open Recent b Close la Save Ctrl 5 SAVE S Print Ctrl F Print Preview Import Embroidery
25. ns can be sent so they can be accessed from the machine control panel or third party machine connection software Create a design Click the Quick Access button for the specific machine The design is sent to the specified folder Using the machine controller or third party connection software access the design from the network or PC folder Load or send the design Stitch the design on the machine Sending a design for the first time 1 2 Click the Connection Manager icon on the Standard toolbar Alternatively select Setup gt Connection Manager Setup If no connections currently exist the message appears m Connection Manager There are no existing connections Would you like to add a new connection to Connection Manager Click Yes to start setting up your connections Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 27 The Connection Settings dialog opens Rotate design by 180 on output 3 Select the connection type Choose from e Machine folder e g Barudan DFS HappyLink LAN Brother PR series and so on e Janome MB 4 e CAMS rhinestone placement machine Enter a unique machine name This name identifies the Quick Access button Select the file type required by the machine Enter or browse to a file location on the network or the PC Browse For Folder MM Desktop 3 Libraries B Khieng King jE Computer hi Network a Corel X6 Serials J B POR di Funnies i
26. on Vista Nor does it work properly with Windows Live Mail under Windows 7 This issue has been resolved Capture Design Bitmap Selection Output Whole design 1 1 Save to disk Current design window Send via email Custom 0 Save amp send View options Bitmap resolution Indude background fabric X 72 DPT screen resolution Y 2 DPI screen resolution Removal of PES Hoop type dialog when saving as PES format Previously when saving a design in PES format the PES Hoop type dialog appeared requiring the user to choose a size The dialog has been removed when outputting a PES design via Save Save As or Connection Manager functions Instead the PES file format Options button in enabled in the relevant dialog Stop function codes with U files Problems have occurred with the placement of Stop function codes in U files Trim and Stop codes are placed in the wrong sequence Stops being placed before Trims This issue has been resolved Object properties ES e3 0Q includes the following improvements in the handling of object properties Use of Object Properties with dual monitors In a situation of dual monitors with the Object Properties dialog in the second screen the slider bar remains outside the dialog to the edge the first monitor In short sliders are not always visible being hidden off the edge of the screen This issue has been resolved Thread and bobbin lengths displayed in EMB file properti
27. ormats that are not available in ES This has now been corrected so that all products open and save the same formats Also three additional formats have been added to both TrueSizer and ES e Elna EMD e Janome Elna Kenmore JEF e Pfaff PCM Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 26 New amp improved features in ES e3 0H The main theme of the e3 0H software update was to enhance support for third party machine connection Specifically Happy ZSK and Brother machines Other aims of this release include Resolve issues associated with multi language release Improve machine connectivity by providing the ability to add named machines and define a network location for design retrieval Fix other outstanding software issues unresolved at the time of last release Updated Connection Manager EmbroideryStudio Connection Manager has been updated to provide a more flexible method of connection to different machines that appear as removable media or use a third party application to connect to the machine and require files to be placed in a specific network location Each machine once set up will only require a single click in order to send a design to the predefined folder on a network or PC Basic workflow The basic workflow is as follows 1 axe oN 2 Set up a machine connection e Each machine has a unique name and Quick Access button e Each machine can have a unique folder to which desig
28. p time Defines time spend stopping in order to place fabric foam etc This is normally determined through empirical observation The number of heads on the machine will be a determining factor e g 16 heads x 6 secs each Design start time Defines how long the machine takes to go from stop to normal speed e g it may stitch a number of slow stitches to start off May be available from machine specs or empirical observation Design end time Defines stopping time the machine may slow down and then travel to the center of the hoop before actually stopping All machines or machine classes you define are listed in the Machine Runtime Setup dialog From here they can be updated or deleted from the system Machine Runtime Setup Machines Machine 2 Delte Settings Design information Once your machines or machine classes have been defined estimated running time for a specific embroidery file is displayed in the Design Properties dialog under a new Runtime tab Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 12 Design Properties Stop Sequence Runtime This tab lists available machines and estimated runtimes for the current design A new Area field on the Information tab shows total design area It is calculated by multiplying design width and height not actual stitched area This figure is used to estimate the cost of fabric or 3D foam that can be used in the design Design Properties i
29. s to a CSV file in a designated file location e The Payroll Department accesses the CSV file and calculates pay rates for the design For example o A Payroll Clerk may need to find out what the runtime will be for a given job in order to pay the machine operator o A Manager may need to provide an accurate runtime estimate for any given design so the payroll department is able to process machine operator payments e The ERP system accesses the CSV file for estimation and scheduling purposes e Runtime information may need to be communicated to the Machine Operator who needs to know the runtime estimate for specific jobs Machine setup Users can set up multiple named machines with specific parameters such as fast speed slow speed trim time color change time etc Access the Machine Runtime Setup dialog via the Setup menu Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 10 i Options gt Manage Auto Fabrics Manage Styles Manage My Hoops Machine Runtime Setup Convert TrueType Font Calibrate Screen Machines Hardware Setup Connection Manager Setup Tablet Setup Scanner Setup Bling Machine Setup security Device Setup This dialog is similar to Connection Manager Setup It lists all machines currently defined in the software for the purposes of runtime analysis Note Machine types set up here are independent of machines define
30. t checkbox has been added to the Connection Settings dialog If ticked all designs sent to that connection will be automatically rotated Color selection for machine icons Connection Manager also now provides the option to select a color for machine icons There are 8 colors to choose from By default the next available color is pre allocated as is currently done with the toolbar icon Save options added to Connection Manager An Options button has been added in Connection Manager This allows users to set up specific file format options directly from within Connection Manager without having to go to the Save As dialog Connection Settings Connection 7 7 Machine Folder Name Machine Folder Toon Machine folder connection File type Deco Brother Babylock PES Folder location C Machine Watch Folder Rotate design by 180 on output First needle number written to Barudan format Previously the first needle number was not written to Barudan file format For a single color design this meant the machine always defaulted to the first needle rather than selected needle With this release all Barudan machine formats have First CC required enabled by default Wilcom EmbroideryStudio e3 0Q Software Update 26 03 2014 Capture Design Bitmap via Email Problems have been reported when using the Capture Design Bitmap function for sending via email It fails to work as expected with Windows Outlook 2010 or Outlook 2007
Download Pdf Manuals
Related Search