WWA-02 Wireless Water & Freeze Alarm, Installation
Contents
1. WAKEUPS Wakeup1 Power saving design wakes up every 4 seconds to test water and freeze sensor Wakeup2 Once every 4 approx hours default unit wakes up to send a notification either to a wakeup node or broadcast Complete User Manual Online at www fortrezz com 1080 Centre Rd Suite C Phone 248 481 7092 PN Auburn Hills MI 48326 sales fortrezz com FORTREZ www fortrezz com Made in USA2. WWA 02 Wireless Water amp Freeze Alarm AR SPEAKS WAVE Installation Instructions 1 Products that speak Z Wave work together better TM Using the WWA 02 in a Z Wave _ Network Program Switch for Inclusion or Exclusion E sei DNN The button in the rear casing is used for including or excluding the WWA 02 in a Z Wave network ti Refer to your controller s User Manual for specific details on network inclusion exclusion and association work together better Contains FCC ID XCT Z3US Inclusion in adding to a network 1 Set the controller to Inclusion mode 2 Briefly press the program e o button once and the controller will indicate the unit has been included in the network The LED will blink when US the inclusion completes Programi 908 MHz Switch EU 868 MHz Choosing a mounting location The WWA 02 is suitable for use in dry interior locations only Common applications include around Jacuzzi tub under sinks near sump pumps refrigerators water heaters toilets and washing machines Avoid placing the unit close to a metal frame or other metal enclosures that may affect RF range Place the unit so that any leaks that may occur will not drip directly on the unit but puddle around the water sensor pads Testing the WWA 02 Moisten a paper towel and place over both of the sensor metal pads on the water sensor until you observe two quick LED blinks If you do see the LED blink remo
3. ve the moistened paper towel and clean the small metal pads of any water residue Drying the sensor contacts will clear the Water Alarm Configuring the WWA 02 The high and low temperature set points in the WWA 02 can be configured The temperature set points can be configured via a smart controller after inclusion details are provided in the technical appendix Refer to your controller gateway s instruction manual Exclusion from removing from a network 1 Set up the exclusion mode at the controller 2 Press and hold the button for approx 2 seconds until the controller indicates the unit has been removed from the network The LED will blink 3 times when the exclusion completes Associations Once in a network a controller can be used to associate the WWA 02 with other devices in the Z Wave network such as a light or another remote audible alarm Wakeup Notification The WWA 02 will wakeup and send a notification every 4 hours default to allow a controller to query and update the status of the unit Status LED Indications If LED remains continually on a inserting a battery please remove the es and contact FortrezZ LLC customer service Battery Low Battery The WWA 02 will send an alert on the Z Wave network at regular intervals when it detects a low battery condition In addition it will periodically blink the LED After a water leak please ensure that there is no moisture in the unit and around the battery
Download Pdf Manuals
Related Search