Home
EPIC 3 Lapel Speaker Mic User Manual
Contents
1. SCOTT S AF T Y INSTALLATION AND USE INSTRUCTIONS SCOTT EPIC 3 LAPEL SPEAKER MIC LSM WITH ACCESSORIES FOR USE WITH SCOTT RESPIRATORS RED EMERGENCY BUTTON EPIC 3 LAPEL ONLY ON CERTAIN MODELS os SPEAKER MIC 7 ASSEMBLY LSM RADIO SPECIFIC CONNECTOR OPTIONAL ACCESSORIES e PUSH TO TALK PADDLE TYPICAL PORTABLE RADIO e PUSH TO TALK RING TRANSCEIVER e COMMAND THROAT MIC NOT INCLUDED e COMMAND COMMS HEADSET WARNING THESE EPIC 3 LAPEL SPEAKER MIC AND ACCESSORIES ARE INTENDED TO BE USED WITH SCOTT RESPIRATORS WHICH MAY SUPPORT HUMAN LIFE IN HAZARDOUS ATMOSPHERES FAILURE TO CAREFULLY FOLLOW THESE INSTRUCTIONS AND WARNINGS AND THE INSTRUCTIONS AND WARNINGS CONTAINED IN YOUR SCOTT RESPIRATOR OPERATING AND MAINTENANCE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH WARNING THIS PRODUCT IS DESIGNED AND INTENDED TO FUNCTION PROPERLY IN REASONABLE ORDINARY FIREFIGHTING CONDITIONS LIKE ALL EQUIPMENT THE FUNCTIONALITY OF THIS PRODUCT MAY BE COMPROMISED BY EXTREME FIRE CONDITIONS 2015 Scott Safety SCOTT the SCOTT SAFETY Logo Scott Health and Safety EPIC 3 RI AV 2000 and AV 3000 are registered and or unregistered marks of Scott Technologies Inc or its affiliates Page 1 of 12 P N 595293 01 Rev C 06 15 CONDITIONS OF SAFE USE US This equipment is listed as intrinsically safe by CSA Group to UL Std UL 913 for use in the following hazardous locations e Class 1 11 D
2. P N 201244 07 6000 7000 SERIES RADIOS P N 201244 06 ela P N 201244 04 XTS 1500 XTS 2500 XTS 3000 XTS 3000R XTS 3500 XTS 5000 V3 10711 P N 201244 02 Page 5 of 12 WARNING DO NOT EXPOSE PORTABLE TWO WAY RADIO OR CABLE TO HIGH HEAT OR FLAME IF USED IN A FIRE FIGHTING APPLICATION RADIO AND CABLES MUST BE CONTAINED WITHIN THE FIRE FIGHTER S TURNOUT GEAR FOR PROTECTION FROM HEAT AND FLAME EXPOSURE TO HIGH HEAT OR FLAME MAY CAUSE THE RADIO OR CABLE TO MELT OR BURN WHICH COULD RESULT IN SERIOUS INJURY OR DEATH TO THE USER WARNING DO NOT POSITION THE PORTABLE TWO WAY RADIO CONNECTED TO THE EPIC 3 LAPEL SPEAKER MIC ASSEMBLY SO THAT THE CONNECTING CORD IS EITHER EXCESSIVELY LOOSE OR EXCESSIVELY TIGHT POSITION THE CORD SO THAT IT WILL NOT POSE A SNAGGING HAZARD WHICH MAY RESULT IN SERIOUS INJURY OR DEATH P N 595293 01 Rev C 06 15 USE OF THE LSM WITH TWO WAY PORTABLE RADIO Before use the user must understand the limitations of the portable two way radio especially any limitations for use in an explosive or flammable atmosphere The user must also inspect and test the portable two way radio in accordance with the radio manufacturer s operating manual for the radio being utilized To use the LSM attached to a portable two way radio proceed as follows 1 Verify that the LSM has been properly connected to the radio as
3. supplied by the user Training is required before use These assemblies are not intended for use under water or for any purpose not specifically authorized by the organized program that applies to the specific user The system consists of an LSM fitted with a cord connector specific to a particular brand and model of portable two way radio and these instructions When connected to a portable two way portable radio pressing the large push to talk button on the LSM will activate the push to talk function of the two way portable radio The user may then speak into the LSM to transmit over the portable two way radio Certain LSM models are equipped with a RED Emergency Button operate the cor responding emergency alert feature on compatible portable radios Refer to the user manual for your portable two way radio for details of use If the RED Emergency Button is not installed on your unit that feature is not available When the LSM assembly is connected to a portable two way radio the use of the assembly radio combination in flammable atmospheres is limited to the most restric tive hazardous location listing applicable to the two devices If the LSM assembly is connected to a non intrinsically safe radio the combination may not be used in flam mable or explosive atmospheres The LSM assembly is available in a variety of cord connector configurations to fit popular brands and models of portable two way radios Each configuration has a unique
4. 15 Page 2 of 12 CONTENTS OF SAFE aoe nctainni nine ine 2 I NE FeAl DESCRIPTION een dant 4 OR CONCERNS EEEE 4 CONNECTING LSM TO A PORTABLE TWO WAY 5 RADIO CABLES AVAILABLE FOR THE 15 5 USE OF THE LSM WITH A TWO WAY PORTABLE RADIO 6 ACCESSORIES FOR THE EPIO 3 ES M serie osie aaea E E aiai 7 CONNECTING ACCESSORIES TO THE LSM 7 PT OTA RING 8 PADDLE E E 8 COMMAND COMMS HEADSET tusestscentacsninssenrezsccuisaenitesnaienssteinzenatiosnelvesduensstansebncsshasanpescenssseiseluesedaneniestesseiavetpuusnieres 9 COMMAND THROAT MIG KIT 10 CLEANING INSPECTION AND MAINTENANCE 11 CEANN T oe E E E E E E A 11 NOPE TON aen E E E E E ve Renna E E E E ore 11 MAINTE NANG E E 11 WARRANTY a OE cn ever er ene amr erento meme tern 12 Page 3 of 12 P N 595293 01 Rev C 06 15 GENERAL DESCRIPTION The SCOTT EPIC 3 LAPEL SPEAKER MIC LSM is designed for use with a SCOTT approved portable two way radio
5. AND RETRY 3 Twist the sleeve to lock the post in place An audible click will indicate that the locking post is in place 4 Test the connection To disconnect accessories from the LSM 1 Twist the sleeve so the locking groove and locking post are aligned then pull apart 2 Replace the cable cap Page 7 of 12 WARNING DO NOT USE ACCESSORIES IN APPLICATIONS WHICH MAY EXPOSE IT TO HIGH HEAT OR FLAME IF USED IN A FIRE FIGHTING APPLICATION ALL ACCESSORIES AND CABLES MUST BE CONTAINED WITHIN THE FIRE FIGHTER S TURNOUT GEAR FOR PROTECTION FROM HEAT AND FLAME EXPOSURE TO HIGH HEAT OR FLAME MAY CAUSE THE ACCESSORY TO MELT OR BURN WHICH COULD RESULT IN SERIOUS INJURY OR DEATH TO THE USER CAUTION INSTALL THE ACCESSORY CONNECTIONS CAREFULLY THE ACCESSORY CABLE IS KEYED TO CONNECT TO THE LAPEL SPEAKER MIC CABLE ONLY ONE WAY DO NOT FORCE IF UNABLE TO CONNECT TURN THE ACCESSORY CABLE 180 DEGREES AND RETRY P N 595293 01 Rev 06 15 PUSH TO TALK RING Optional Push To Talk Ring and strap accessory SCOTT P N 201226 01 This Push To Talk Ring includes a hook and loop backing that can be attached to an ac companying hook and loop finger strap The Push To Talk Ring can be actuated when worn on finger under an encapsulating protective glove When installed the Push To Talk Ring operates the same as the Push To Talk Button on the side of the LSM assembly The Push to Talk Ring accessory is not intended for use in ap
6. Adjust the straps to hold the Throat Mic securely in place without obstructing normal breathing Secure with the magnetic fastener 4 Place Earbud comfortably in ear and attach Lapel Clip to keep in place 5 Turn the portable two way radio and verify that the Throat Mic is operating properly Speak in a normal voice while pressing the Push To Talk button on the Push To Talk Ring to transmit a message through the portable radio 6 Secure the cord from the Command Throat Mic so that it will not present a hazard of snagging while in use The cord must be positioned so that it is not excessively loose or excessively tight and does not pull on the LSM assembly any way If the unit does not operate properly remove the unit from service and tag for repair or replacement LAPEL CLIP THROAT MIC CONNECTOR PUSH TO TALK RING COMMAND THROAT MIC KIT P N 595293 01 Rev C 06 15 Page 10 of 12 WARNING DO NOT USE THE OPTIONAL COMMAND THROAT MIC ACCESSORY IN APPLICATIONS WHICH MAY EXPOSE IT TO HIGH HEAT OR FLAME IF USED IN A FIRE FIGHTING APPLICATION ALL ACCESSORIES AND CABLES MUST BE CONTAINED WITHIN THE FIRE FIGHTER S TURNOUT GEAR FOR PROTECTION FROM HEAT AND FLAME EXPOSURE TO HIGH HEAT OR FLAME MAY CAUSE THE COMMAND THROAT MIC TO MELT OR BURN WHICH COULD RESULT IN SERIOUS INJURY OR DEATH TO THE USER NOTE INSTALLATION OF THE COMMAND THROAT MIC KIT WHILE THE RADIO IS ON MAY CAUSE THE RADIO TO TRANSMIT CONSTANTLY
7. Optional Command Throat Mic Kit SCOTT P N 201228 01 is designed for two way radio communication with a two way portable radio This kit includes an adjustable Command Throat Mic with magnetic fastener an Ear Bud and a Push To Talk Ring When worn around the neck the Command Throat Mic is designed to pick up and transmit the vibration directly from your vocal cords This assembly will disable the radio speaker and microphone and route all outgoing communication directly from the Throat Mic to the radio and all incoming communication back from the radio into the earbud The Command Throat Mic Kit accessory is not intended for use in applications which may cause exposure to high heat or flame If the accessory is being used with a two way portable radio in a fire fighting application the two way portable radio cables and the accessory must be contained within the fire fighter s turnout gear for protection from heat and flame Install as follows 1 Turn off radio before installing the Command Throat Mic Kit 2 Assemble the Command Throat Mic Kit a Plug the cable from the Connector to the LSM according the CON NECTING THE ACCESSORIES TO THE EPIC 3 LSM section of this instruction Plug the cable from the Push To Talk Ring into the Connector Plug the Lapel Clip into the Throat Mic Plug the Earbud into the Lapel Clip and turn counterclockwise to lock 3 Place Throat Mic around neck with the microphone disc centered in front
8. WHICH COULD RESULT IN SERIOUS INJURY OR DEATH TO THE USER CONNECTING LSM TO PORTABLE TWO WAY RADIO The following instructions apply to the use of a LSM with a portable two way radio All cords must be positioned such that they do not interfere with the function of the respirator or present a safety hazard to the user 1 Attach the radio connector from the LSM to the portable two way radio according to the instructions provided with the two way portable radio 2 user must place the radio on his person so that the radio is protected and securely attached There must not be excessive slack in the cord from the LSM to the radio which could present a hazard of snagging 3 Position LSM where it will be readily accessible Secure the cord to the two way portable radio 4 If the LSM is being used with a two way portable radio in a fire fighting application two way portable radio and radio cable must be contained within the fire fighter s turnout gear for protection from heat and flame FOR FIRE FIGHTING APPLICATIONS THE TWO WAY PORTABLE RADIO AND THE RADIO CABLE MUST BE PROTECTED UP TO THE POINT SHOWN CABLE ILLUSTRATED IS TYPICAL RADIO APPEARANCE MAY VARY PROTECTION OF TWO WAY PORTABLE RADIO AND RADIO CABLE RADIO CABLES AVAILABLE FOR THE LSM HARRIS MODELS KENWOOD MODELS MOTOROLA MODELS MOTOROLA MODELS MOTOROLA MODELS P7300 SERIES XG SERIES P N 201244 22 TK 280 5220 5320 NX 210 410
9. apply to any malfunction of or damage to the products resulting from accident alteration misuse or abuse THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FORAPARTICULAR PURPOSE INADDITION SCOTT EXPRESSLY DISCLAIMS ANY LIABILITY FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES IN ANY WAY CONNECTED WITH THE SALE OR USE OF SCOTT SAFETY PRODUCTS AND NO OTHER FIRM OR PERSON IS AUTHORIZED TO ASSUME ANY SUCH LIABILITY fa SCOTT SAFETY Monroe Corporate Center PO Box 569 S AF ET Y Monroe NC 28111 Telephone 1 800 247 7257 Fax 704 291 8330 www scottsafety com Tyco Business Printed in USA P N 595293 01 Rev C 06 15 Page 12 of 12
10. in use The cord must be positioned so that it is not excessively loose or excessively tight and does not pull on the LSM assembly any way If the unit does not operate properly remove the unit from service and tag for repair or replacement EARPIECE L es SPEAKER gt MICROPHONE 2 COMMAND COMMS HEADSET Page 9 of 12 WARNING DO NOT USE THE OPTIONAL COMMAND COMMS HEADSET ACCESSORY IN APPLICATIONS WHICH MAY EXPOSE IT TO HIGH HEAT OR FLAME IF USED IN A FIRE FIGHTING APPLICATION ALL ACCESSORIES AND CABLES MUST BE CONTAINED WITHIN THE FIRE FIGHTER S TURNOUT GEAR FOR PROTECTION FROM HEAT AND FLAME EXPOSURE TO HIGH HEAT OR FLAME MAY CAUSE THE COMMAND COMMS HEADSET TO MELT OR BURN WHICH COULD RESULT IN SERIOUS INJURY OR DEATH TO THE USER WARNING THE CORD FROM THE COMMAND COMMS HEADSET MUST BE SECURED SO THAT IT WILL NOT PRESENT A HAZARD OF SNAGGING WHILE IN USE THE CORD MUST BE POSITIONED SO THAT IT IS NOT EXCESSIVELY LOOSE OR EXCESSIVELY TIGHT AND DOES NOT PULL ON THE LAPEL SPEAKER MIC ASSEMBLY FAILURE TO PROPERLY MANAGE THE CORD FROM THE COMMAND COMMS HEADSET MAY RESULT IN SNAGGING THE CORD IN AN EMERGENCY SITUATION WHICH COULD RESULT IN SERIOUS INJURY OR DEATH NOTE THE COMMAND COMMS HEADSET DOES NOT HAVE AN INDEPENDENT PUSH TO TALK BUTTON THE MICROPHONE ON THE HEADSET OPERATES USING THE PUSH TO TALK BUTTON LOCATED ON THE LSM P N 595293 01 Rev C 06 15 COMMAND THROAT MIC KIT
11. of the LSM assembly The Command Comms Headset is not intended for use in applications such as fire fighting which may cause exposure to high heat or flame If the accessory is being used with a two way portable radio in a fire fighting application the two way portable radio cables and the accessory must be contained within the fire fighter s turnout gear for protection from heat and flame Install and use as follows 1 Turn off radio before installing the Command Comms Headset NOTE INSTALLATION OF THE HEADSET WHILE THE RADIO IS ON MAY CAUSE THE RADIO TO TRANSMIT CONSTANTLY LOCKING UP YOUR RADIO SYSTEM IF THIS SHOULD HAPPEN TURN OFF THE RADIO THE RADIO CAN THEN BE TURNED BACK ON RESTORING NORMAL OPERATIONS 2 Connect the Command Comms Headset cable to the LSM according to the CONNECTING ACCESSORIES TO THE LSM section of this instruction 3 Place the Command Comms Headset around the back of the head with both earpieces resting over the top of the ears The speaker should be positioned directly over the left ear Adjust the microphone arm so that the microphone is situated 1 2 or less from the mouth 4 Turn the portable two way radio and verify that the headset is operating properly Speak into the headset microphone while pressing the Push To Talk button on the LSM to transmit a message through the portable radio 5 Secure the cord from the Command Comms Headset so that it will not present a hazard of snagging while
12. part number representing the radio specific connector used to attach it to the portable two way radio for which it was designed Do not attempt to attach an LSM assembly to a portable two way radio for which it was not designed Optional Push To Talk Paddle and Push To Talk Ring accessories can be actuated when worn under an encapsulating protective garment Also available are a COM MAND COMMS headset with microphone and a THROAT MIC KIT that includes a throat mic ear buds and push to talk ring If these accessories are being used with a two way portable radio in a fire fighting application the two way portable radio all cables and the accessory must be contained within the fire fighter s turnout gear for protection from heat and flame EMERGENCY BUTTON MICROPHONE PUSH TO TALK BUTTON SPEAKER ACCESSORY CONNECTION WITH CAP EPIC 3 LAPEL SPEAKER MIC LSM QUESTIONS OR CONCERNS If you have any questions or concerns regarding use of this equipment contact your authorized SCOTT distributor or contact SCOTT at 1 800 247 7257 or 704 291 8300 outside the continental United States P N 595293 01 Rev C 06 15 Page 4 of 12 WARNING TRAINING IS REQUIRED BEFORE USE ESPECIALLY IN AN EMERGENCY SITUATION USE OF THIS EQUIPMENT WITHOUT PROPER TRAINING COULD LEAD TO SERIOUS INJURY OR DEATH WARNING THE USE OF AN INTRINSICALLY SAFE DEVICE IN AN ATMOSPHERE FOR WHICH IT IS NOT LISTED OR THE USE OF A NON INTRINSICALLY S
13. AFE DEVICE INA FLAMMABLE OR EXPLOSIVE ATMOSPHERE MAY LEAD TO FIRE OR EXPLOSION RESULTING IN SERIOUS INJURY OR DEATH WARNING WHEN THE SCOTT EPIC 3 LAPEL SPEAKER MIC ASSEMBLY IS CONNECTED TO A PORTABLE TWO WAY RADIO THE USE OF THE ASSEMBLY RADIO COMBINATION IN FLAMMABLE OR EXPLOSIVE ATMOSPHERES 15 LIMITED TO THE MOST RESTRICTIVE INTRINSIC SAFETY LISTING APPLICABLE TO THE TWO DEVICES IF THE EPIC 3 LAPEL SPEAKER MIC ASSEMBLY IS CONNECTED TO A NON INTRINSICALLY SAFE RADIO THE COMBINATION MUST NOT BE USED IN FLAMMABLE OR EXPLOSIVE ATMOSPHERES THE USE OF A NON INTRINSICALLY SAFE DEVICE IN A FLAMMABLE OR EXPLOSIVE ATMOSPHERE MAY LEAD TO FIRE OR EXPLOSION RESULTING IN SERIOUS INJURY OR DEATH CAUTION EACH CONFIGURATION OF THE EPIC 3 LAPEL SPEAKER MIC ASSEMBLY IS DESIGNED TO FIT A SPECIFIC BRAND AND MODEL PORTABLE TWO WAY RADIO DO NOT ATTEMPT TO CONNECT THE EPIC 3 LAPEL SPEAKER MIC ASSEMBLY TO A DIFFERENT BRAND OR MODEL PORTABLE TWO WAY RADIO ATTEMPTING TO CONNECT THE EPIC 3 LAPEL SPEAKER MIC TO A DIFFERENT BRAND OR MODEL RADIO MAY CAUSE DAMAGE TO THE EPIC 3 LAPEL SPEAKER MIC ASSEMBLY THE RADIO OR BOTH WARNING DO NOT USE ACCESSORIES IN APPLICATIONS WHICH MAY EXPOSE IT TO HIGH HEAT OR FLAME IF USED IN A FIRE FIGHTING APPLICATION ALL ACCESSORIES AND CABLES MUST BE CONTAINED WITHIN THE FIRE FIGHTER S TURNOUT GEAR FOR PROTECTION FROM HEAT AND FLAME EXPOSURE TO HIGH HEAT OR FLAME MAY CAUSE THE ACCESSORY TO MELT OR BURN
14. AMAGED CABLE 4 Unused connectors must be capped when not in use MAINTENANCE Except for cleaning and replacing the belt clip no attempt shall be made to do main tenance or repairs beyond the scope ofthis instruction manual without proper training LSM BELT CLIP REPLACEMENT PARTS Two Belt Clip styles are available for the LSM assembly Replacement screws can be ordered separately Clothes Pin Belt Clip P N 31003083 standard Alligator Belt Clip P N 31003082 Screw 4 40 X 3 16 P N 31002867 If the Belt Clip is damaged or missing replace as follows 1 Remove the four 4 screws holding the belt clip on battery door Put aside for installation of new belt clip If necessary remove any dirt or debris from back of battery door Install new belt clip using the four 4 screws removed in Step 1 Tighten until snug DO NOT OVERTIGHTEN Verify that new belt clip rotates properly and clips into position Inspect the LSM assembly to verify that the battery door closes properly with the belt clip installed If any problems are observed remove the unit from service and tag for return to SCOTT or your SCOTT distributor FOUR 4 BELT CLIP SCREWS Page 11 of 12 WARNING MAINTAIN THE EPIC 3 LAPEL SPEAKER MIC ASSEMBLY ONLY AS DIRECTED IN THIS INSTRUCTION DO NOT ATTEMPT DISASSEMBLY OR REPAIR BEYOND THAT WHICH IS SPECIFIED IN THIS INSTRUCTION ORIN THE INSTRUCTIONS PROVIDED WITH SERVICE PARTS IMPROPER MAINT
15. ENANCE OR TAMPERING WITH THE EPIC 3 LAPEL SPEAKER MIC MAY RESULT IN FAILURE OF THE COMMUNICATION SYSTEM AND MAY LEAD TO SERIOUS INJURY OR DEATH P N 595293 01 Rev 06 15 SCOTT SAFETY LIMITED WARRANTY ON EPIC 3 COMMUNICATION PRODUCTS AND ACCESSORIES SCOTT warrants all EPIC 3 communications devices associated accessories unused consumable supplies and carrying cases supplied with the products to be free from defects in workmanship and materials under normal use and service for one 1 year from the date of original manufacture by SCOTT SCOTT s obligation under this warranty is limited to replacing or repairing at SCOTT s option the products or components shown to be defective in either workmanship or materials Only personnel of SCOTT or when directed by SCOTT authorized SCOTT agents are authorized to perform warranty obligations This warranty does not apply to defects or damage caused by any repairs of or alterations to the products made by owner or any third party unless expressly permitted by SCOTT product manuals or by written authorization from SCOTT To obtain performance under this warranty and as acondition precedent to any duty of SCOTT the purchaser must return such products to SCOTT a SCOTT authorized distributor ora SCOTT authorized service center Any product returned to SCOTT shall be sent to SCOTT SAFETY Attn Warranty Claim Dept P O Box 569 Monroe NC 28111 This warranty does not
16. LOCKING UP YOUR RADIO SYSTEM IF THIS SHOULD HAPPEN TURN OFF THE RADIO THE RADIO CAN THEN BE TURNED BACK ON RESTORING NORMAL OPERATIONS WARNING THE CORD FROM THE COMMAND THROAT MIC MUST BE SECURED 50 THAT IT WILL NOT PRESENT A HAZARD OF SNAGGING WHILE IN USE THE CORD MUST BE POSITIONED SO THAT IT IS NOT EXCESSIVELY LOOSE OR EXCESSIVELY TIGHT AND DOES NOT PULL ON THE LAPEL SPEAKER MIC ASSEMBLY FAILURE TO PROPERLY MANAGE THE CORD FROM THE COMMAND COMMS HEADSET MAY RESULT IN SNAGGING THE CORD IN AN EMERGENCY SITUATION WHICH COULD RESULT IN SERIOUS INJURY OR DEATH CLEANING INSPECTION AND MAINTENANCE CLEANING 1 After use the LSM may be cleaned with a damp sponge A solution of water and mild dish detergent may be used if necessary 2 Take care prevent excessive amounts of water from entering the holes for the speaker or the microphone DO NOT IMMERSE ASSEMBLY IN LIQUID INSPECTION After each use inspect the LSM assembly for damage If any damage is found remove the equipment from service and tag for repair by authorized personnel No attempt to disassemble or repair the LSM assembly shall be made 1 Inspect the housing for cracks or other damage that could interfere with the usability of the equipment 2 Check for missing components 3 Inspect the cables for cuts in the flexible wire etc If any damage to the cable is found remove the unit from service and tag for replacement DO NOT USE A UNIT WITH A D
17. TION ALL ACCESSORIES AND CABLES MUST BE CONTAINED WITHIN THE FIRE FIGHTER S TURNOUT GEAR FOR PROTECTION FROM HEAT AND FLAME EXPOSURE TO HIGH HEAT OR FLAME MAY CAUSE THE PUSH TO TALK RING OR PUSH TO TALK PADDLE TO MELT OR BURN WHICH COULD RESULT IN SERIOUS INJURY OR DEATH TO THE USER WARNING THE CORD FROM THE PUSH TO TALK RING OR PUSH TO TALK PADDLE MUST BE SECURED SO THAT IT WILL NOT PRESENT A HAZARD OF SNAGGING WHILE IN USE THE CORD MUST BE POSITIONED SO THAT IT IS NOT EXCESSIVELY LOOSE OR EXCESSIVELY TIGHT AND DOES NOT PULL ON THE EPIC 3 LAPEL SPEAKER MIC ASSEMBLY FAILURE TO PROPERLY MANAGE THE CORD FROM THE PUSH TO TALK RING OR PUSH TO TALK PADDLE MAY RESULT IN SNAGGING THE CORD IN AN EMERGENCY SITUATION WHICH COULD RESULT IN SERIOUS INJURY OR DEATH NOTE THE PUSH TO TALK BUTTON ON THE LAPEL SPEAKER MIC HOUSING WILL CONTINUE TO OPERATE WHEN OTHER PUSH TO TALK ACCESSORIES ARE PLUGGED INTO THE LAPEL SPEAKER MIC COMMAND COMMS HEADSET Optional Command Comms Headset SCOTT P N 201229 01 The Command Comms Headset is designed for two way radio communication with a two way portable radio This Command Comms Headset includes an earpiece speaker and a microphone with adjustable arm When connected to the radio the headset will disable the radio speaker and microphone and route all communication directly into the headset speaker and microphone The Command Comms Headset microphone operates using the Push To Talk Button on the side
18. ilable P N 595293 01 Rev C 06 15 Page 6 of 12 WARNING UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND LIMITATIONS PROVIDED BY THE MANUFACTURER OF THE PORTABLE TWO WAY RADIO USED WITH THE EPIC 3 LAPEL SPEAKER MIC ASSEMBLY FAILURE TO USE THE PORTABLE TWO WAY RADIO IN ACCORDANCE WITH THE MANUFACTURER S INSTRUCTIONS MAY RESULT IN FAILURE OF THE RADIO AND LOSS OF COMMUNICATIONS WHICH COULD RESULT IN SERIOUS INJURY OR DEATH CAUTION ATTEMPTING TO CONNECT AN EPIC 3 LAPEL SPEAKER MIC ASSEMBLY TO A RADIO OTHER THAN THE SPECIFIC MODEL THE EPIC 3 LAPEL SPEAKER MIC ASSEMBLY IS DESIGNATED FOR USE WITH MAY CAUSE DAMAGE TO THE ASSEMBLY THE RADIO OR BOTH CAUTION THE TWO WAY PORTABLE RADIO MUST BE ON AND PROPERLY CONNECTED TO THE EPIC 3 LAPEL SPEAKER MIC ASSEMBLY FOR THE SYSTEM TO OPERATE ACCESSORIES FOR THE EPIC 3 LSM CONNECTING ACCESSORIES TO THE LSM All accessories attach to the LSM Cable using the same type of connector LOCKING GROOVE LOCKING POST TWIST SLEEVE TO LOCK POST IN PLACE connect accessories to LSM 1 Remove the cap from the end of the LSM cable 2 Align the locking groove on the sleeve of the accessory cable with the locking post on the LSM cable and push together NOTE WHEN PROPERLY ALIGNED THE LOCKING POST WILL SLIDE EASILY INTO LOCKING GROOVE THE ACCESSORY CABLE IS KEYED TO CONNECT TO THE LSM CABLE ONLY ONE WAY DO NOT FORCE IF UNABLE TO CONNECT TURN THE ACCESSORY CABLE 180 DEGREES
19. instructed in the CONNECTING LSM TO A PORTABLE TWO WAY RADIO section of this instruction 2 Turn ON the portable two way radio according to the instructions pro vided with the two way portable radio The LSM will only operate when the radio is ON 3 Test the operation of the assembly pressing the Push To Talk button on the LSM to activate the send function of the portable radio a Talking into the LSM assembly should result in voice communications through the portable radio b The radio should indicate that it is transmitting see radio manufacturer s operating manual If the unit does not operate properly remove the unit from service and tag for repair or replacement 4 Adjust the speaker volume of the LSM using the volume control on the portable two way radio 5 To transmit a message over the portable two way radio press the Push To Talk but ton on the side of the LSM housing When connected to a portable radio pressing this button will activate the Push To Talk func tion of the radio 6 The Belt Clip on the back of the LSM ro tates for attachment There are eight 8 detents to hold the selected position 7 Certain LSM models are equipped with a RED Emergency Button operate the corre sponding emergency alert feature on com patible portable radios Refer to the user manual for your portable two way radio for details of use If the RED Emergency Button is not installed on your unit that feature is not ava
20. ivision Groups D and 4 This equipment is listed as intrinsically safe by CSA Group to CSA C22 2 No 60079 11 for use in the following hazardous locations e 11 T4 Canada e Class Zone 0 AEx ia IIB T4 USA To maintain the Intrinsic Safety Listing inspect equipment regularly per the Regular Operational Inspection procedures in this instruc tion Do not tamper with or substitute components in any manner Use only batteries of the type indicated in the Battery Installation section of these instructions Do not mix old batteries with unused batteries or from different manufacturers Open the battery compart ments only in an area known to be free of flammable or explosive hazards Due to the potential for electrostatic discharge clean with dampened cloth only Do not use dry cloth to clean the surface Do not clean and maintenance device in an explosive environment When connected to a portable TWO WAY radio the use of the assembly radio combination in flammable atmospheres is limited to the most restrictive listing applicable to the two devices THIS PRODUCT IS INTRINSICALLY SAFE WHEN USED IN ACCORDANCE WITH CONTROL DRAWING 31003129 APPROVED BATTERIES Alkaline Batteries Eveready Energizer Max E92 Duracell Pro Cell PC2400 Eveready Energizer Industrial EN92 Rayovac 824 Duracell Copper Top MN2400 Rechargeable Batteries Duracell Rechargeable DC2400 P N 595293 01 Rev C 06
21. n the side of the LSM assembly The Push to Talk Paddle accessory is not intended for use in applications which may cause exposure to high heat or flame If the accessory is being used with a two way portable radio in a fire fighting application the two way portable radio cables and the accessory must be contained within the fire fighter s turnout gear for protection from heat and flame Install and use as follows 1 Connect the Push To Talk Paddle cable to the LSM according to the CONNECTING ACCESSORIES TO THE LSM section of this instruction 2 Turn portable two way radio and verify that the Push To Talk Paddle 15 Operating properly When connected properly pressing this button will ac tivate the Push To Talk function of the radio 3 Position the Push To Talk Paddle where it can be easily actuated with the other safety equipment worn 4 After donning secure the cord from the Push To Talk Paddle so that it will not present a hazard of snagging while in use The cord must be positioned PUSH TO TALK PADDLE so that it is not excessively loose or excessively tight and does not pull on the LSM If the unit does not operate properly remove the unit from service and tag for repair or replacement P N 595293 01 Rev C 06 15 Page 8 of 12 WARNING DO NOT USE THE OPTIONAL PUSH TO TALK RING OR PUSH TO TALK PADDLE IN APPLICATIONS WHICH MAY EXPOSE IT TO HIGH HEAT OR FLAME IF USED IN A FIRE FIGHTING APPLICA
22. plications which may cause exposure to high heat or flame If the accessory is being used with a two way portable radio in a fire fighting application the two way portable radio cables and the accessory must be contained within the fire fighter s turnout gear for protection from heat and flame Install and use as follows 1 Connect the Push To Talk Ring cable to the LSM according to the CON NECTING ACCESSORIES TO THE LSM section of this instruction 2 Turn on the portable two way radio and verify that the Push To Talk Ring is operating properly When connected properly pressing this ring will activate the Push To Talk function of the radio 3 Position the Push To Talk Ring where it can be easily actuated with the other safety equipment worn 4 Secure Push To Talk Ring in place using the Velcro straps 5 After donning secure the cord from the Push To Talk Ring so that it will not present a hazard of snag ging while in use The cord must be positioned so that it is not excessively loose or excessively tight and does not pull on the LSM assembly any way If the unit does not operate properly remove the unit from service and tag for repair or replacement PUSH TO TALK RING PUSH TO TALK PADDLE Optional Push To Talk Paddle accessory SCOTT P N 201227 01 This Push To Talk Paddle can be actuated when worn under an encapsulating protective garment When installed the Push To Talk Paddle operates the same as the button o
Download Pdf Manuals
Related Search
Related Contents
American Standard Town Square Fixture-Mounted Bidet Fitting 2555.401 User's Manual tacoTM Instrument user manual GUIDA REBOKE NINJA 25000 Exmark Lazer ZXP User's Manual Emerson 72EE) Installation Manual 2015年6月発生分 Samsung 13,3" ATIV Book 9 Lite NP905S3G User Manual (Windows 8) Manual de Instalación y Mantenimiento - Q Manuel d`utilisation Nokia N95 8GB Copyright © All rights reserved.
Failed to retrieve file