I21/I21T Door Phone
Contents
1. lt lt lt DOOR PHONE gt MAINTENANCE 1 Type Hot key Number 1 2 is the fixed phone number when press the DSS key the phone call the fixed phone number this phone number can also be set as IP address 2 Event You can set type as key event there re many options in the subtype for your selection None Dial Release OK 3 Number Setting Number1 and number2 is 2 different calling number when the Dial Mode is lt Main Secondary gt Number1 is the Main number and Number2is the secondary number When the Dial Mode is Day Night Number1 is the daytime period and Number2 is the night time period EGS 3 NETWORK DOOR PHONE MAINTENANCE LOGOUT FUNCTION KEY Enable Indoor Open Open Duration Remote Password Door Unlock Indication DOOR PHONE Door LOG Disable 5 3 10 seconds Long beeps Enable Auto Handdown Talk Duration Local Password Keypad Mode Enable 120 20 600 seconds Dial and Password Description 121 IP Door Phone Enable Access Table Enable Dial Mode Select Main Secondary Time of Switch 16 5 50 Day Start Time 06 00 00 00 23 59 Day End Time 18 00 00 00 23 59 Address of Log Server 0 0 0 0 Port of Log Server Enable Log Server Disable Enable numeric keypad Enable Apply Access Table Number Access Code Name Position Department ID Access Type 602 602 william ODM Guest Add Access Number2. ONIDER 30 4 93 51 FUNCUON KO eer tasa E 30 4352 Door Gard ooo bu 34 43 97325 35 D APPENA oo rero nee teen RET deo 35 RUM dud uq Ms MM EIE MEM 36 5 1 2 BaSiC Feature eben cit eal ie Lnd ci Lite 36 Ls ag espere 2 a 37 5 2 Owner Remote Opens the Voice Access Controller by VOIP 37 9 3 Management TEE ELM NES esI eee IEEE 37 5 9 14ssue Card sucia ep ie ite eet 37 Lise eee ES 38 5 9 9 Delete User card esie dota ao RA esie caue das ues quc du rM esM 39 5 3 4 Add Remote Visit 40 1 Acquaint 121 21 Voice Intercom 121 21 voice entrance guard is a full digital network door phone its core adopt Fanvil mature Voip solution Broadcom1190 chipset stable and reliable performance Hands free adopting digital full duplex mode Voice loud and clear generous appearance solid durable easy for installation comfortable keypad low power consumption 121 121T voice entrance guard support entrance g
3. Access Code Loo Name Add Department Position aa ID EGS to config door phone and maintenance the visitor data Voice Access Configuration Initial Value Time for open the door if time is up the 5S door will be closed automatically Enable Auto When this function enable After time is up Enable Handdown the call will be ended automatically Holding Time After time is up the call will be ended automatically Remote Openig Local PIN Local password for the keypad 6789 Tone settings Mute Short beeps Long beeps Bell ringing Keypad mod 120 Valid Description Remote phonebook settings Enable numeric keypad Enable Card Password only Prohibit call Password Dial i20 IP door phone Enabling access phone when remote Enable phone calls input access code first then input password to open the door Disabling access phonebook when remote phone calls input password only Provide keyboard function open Displayed on iDoorPhoneNetworkScanner software open Provide card reader function 32 Primary Secondary mode Primary secondary corresponds to the first number in Dial Mode Select one button Call function Day Night mode corresponds to the second number in one button Call function The period between one button Call function to call the first and second number lt gt Day Start Time When select Day Nig
4. 1 MAL Aires ees Sod 66516 Enabled 192 166 3735 Emys Mods IE 19 158 1 1 14 5 1 Dire iTi 158 SIP Line 2 2 5060 Jnappbed i BAIN TL AARC NE CURTI Y Field Name Shows the phone current WAN configuration include WAN IP Network get way Static DHCP PPPoE MAC address IP the default gateway IP address Shows the phone current SIP LINE 1 2 registered and the Accounts corresponding number status The bottom of the page shows 21 24 version number and release date 4 3 1 2 Wizard BASIC WAN Connection Mode NETWORK Static PPPOE PHONE MAINTENANCE SECURITY Wizard Telephone network on line mode please according to the actual network environment select the appropriate network model This phone provides three kinds of network online ways otatic If your ISP Services provide you with a fixed IP address you can choose this After selecting you must fill the Static table with IP Address Netmask Gateway Primary DNS and other related information If you don t know the information please ask your ISP service provider or network management personnel for assistance DHCP in this mode network information will got automatically from the DHCP server you need not to manually enter these fields PPPoE select this mode yo
5. 24 Configure SIP registration account password Configure the number registered to the SIP server Telephone number ary if itis empty then it is not a registered Configure display names able to do when calling in the called party not name the calling party Display Name can show this configuration parameter allow input English letters Configure proxy server IP address generally SIP service provide users the use proxy server and register the same server configuration to provide services thus the proxy server configuration is Proxy server address usually is the same as the registered server configuration if the service providers give different registered server from the proxy server IP address configuration need modify their server configuration proxy Server port Configure SIP proxy server signaling port proxy server account Configure proxy server account M Set the proxy server password Configure the SIP local domain name If the server does not require a local domain name to specify the domain name for a SIP terminal the local domain can be configured with the same address or domain name server System to simplify the user input users can not enter the local domain the system will local domain name automatically get registered address fill in the content of domain realm Configure the backup proxy server address if the backup proxy server master agent server address is unavailabl
6. ODM ID 0004770424 Access Type Guest 4
7. Start Time Duration Peer Calls Tvpe August 09 13 35 0 second s 4223 SIP1 Placed Call Loc Start Time The call log start time Duration The call records of talk time Dialed Calls This call log is the account of other side and call protocol and using line Type Placed answered Missed missed Received Cincoming 4 3 2 Network 4 3 2 1 WAN Config DHCP SERVICI TIMEBDATE WAM Status TARR E amp 02 1X Settings WAN Confio WAN Status Active IP Address Current Subnet Mask Current IP Gateway Address MAC Timestamp 192 158 1 12 ez ses 192 168 1 1 00 02 5f 00 00 21 2012 3 1 17 Active IP Address The phone current IP The current default gateway IP MAC address Show the time of getting MAC address WAN Settings Obtain DNS Server Automatically Static IP pHcP PPPoE Apply Telephone network on line mode Please according to the actual network environment choose a suitable network mode This phone provides three ways for network online e static If your ISP services provide you with fixed IP address then you can choose this item After choosing you must fill it into Static table IP Address Netmask Gateway Primary DNS and other related information If you don t know these information can ask assistance from your ISP provider or network management personnel DHCP in this mode network information will
8. When you press the DND hot key the phone will send a message to the Server DND On Code and the server will turn on the DND function Then any calls to the extension will be rejected by the server automatically And the incoming call record will not be displayed in the Call History oet the DND Off Code When you press the DND hot key the phone will send a message to the Server and the server will turn off the DND function Set the Always CFwd On Code when you choose to enable the always forward function on your phone it will send message to the server and the server will turn on the function immediately When there are calls to the extension the server will always forward it to the set number automatically And the IP phone will not show the record in the call history anymore Set the Always CFwd Off Code when you choose to disable the always forward function on your phone it will send message to the server and the server will turn off the function immediately Set the Busy CFwd On Code when you choose to enable the busy forward function v on your phone it will send message to the server and the server will turn on the function immediately When there are calls to the extension the server will forward it to the set number automatically based the forward type And the IP phone will not show the record in the call history anymore Configure subscription time interval Registration Expire DND Off Code Always C
9. must be in the beginning of 29 in via field of Strict matching the invite sip message received or the phone won t Branch field response to the invite sip message Notice the deployment will become effective in all sip lines Enable Group by selecting it then the phone enable Enable Group the sip group backup function function Notice the deployment will become effective in all sip lines opecify the registration failure retry time if the phone register failed the phone will register again after registration failure retry time Notice the deployment will become effective in all sip lines Registration Failure Retry Time 4 3 3 2 Stun Config In this web page you can config SIP STUN STUN By STUN server the phone in private network could know the type of NAT and the NAT mapping IP and port of SIP The phone might register itself to SIP server with global IP and port to realize the device both calling and being called in private Stun server tell ant to receive data from 5060 Gateway NAT STUN Server network 4 3 5 FUNCTION KEY 4 3 5 1 Function key 1 4 programmable key in phone software depend on hardware you can configurate different feature on each key You can ref to below indications for each feature default is NA means without any feature settings 30 DOOR PHONE Door Card Function Key Settings Key Type Number 1 Number 2 Line Subtype Apply lt
10. every configured time server respond 210OK to maintain server detection If its UDP phone will send option UDP message to server every configured time Configure Server detection time interval if phone Server detection time enable SIP server detection function phone will to interval test whether a server response every configured time set DTMF sending mode there are three e DTMF RELAY e DIMF RFC2833 Busy CFwd Off Code Server Detection Type Type SIP INFO Different VoIP Service providers may provide different modes Local Port Set sip port of each line Ring Type oet ring type of each line Enable Vie TB Enable Disable system to support RFC3581 Via rport is special way to realize 51 Enable PRACK Enable or disable SIP PRACK function suggest use 28 default config Set more parameters in contact field connection with SEM server Convert URI Convert to 9023 when send URI Dial Without Registered Set call out by proxy without registration or has some unique requirements or call flows Select SIP protocol version to adapt for the SIP server which uses the same version as you select RFC Protocol Edition For example if the server is CISCO5300 you need to change to RFC2543 else phone may not cancel call normally System uses RFC3261 as default Set Anonymous call out safely Support opecification version RFC3323and RFC3325 Enable Disa
11. in addition to receiving port e g PC A port 1 After sending the broadcast information will be forwarded to the port 2 3 4 In chart 2 the switch generate red and blue VLAN Meanwhile set port 1 2 as red VLAN port 4 VLAN Then A port 1 send out broadcast frame switches only will forward it to other port belongs to a VLAN port 2 which also belong to red VLAN Will not be forwarded to the blue port VLAN As well C Cport 3 send out broadcast frame Will only be forwarded to other belong to the blue port VLAN Will not be forwarded to belong to the red VLAN ports In this VLAN by limiting the broadcast frame forwarding range to partition the broadcast domain In the above chart for better illustration use red blue two colors to identify different VLAN in the practice is using VLAN ID to distinguish Link Layer Discovery Protocol LLDP Settings NETWORK Enable LLDP Enable Learning Function r1 i Quality of Service QoS Settings Enable SCP PHONE 1 wio ETE T MIC WARM Port VLAH Settings WAN Port VLAN Port WLAN ILC 0 4093 SECURITY LAN Port VLAN 5 LAN Port VLAM Fol WAN LAN Fort WLAN DID 20 Field LLDP Setup Description Open LLDP Open the phone LLDP Message function Open Learning Open phone learning LLDP function After the Function opening
12. on the Reader Sensing Area and make sure the reader responded 3 Put Issue Administration Card on the Reader Sensing Area again to sign out issuing then the reader is back to the normal state 5 3 3 Delete the user card Method 1 1 Choose Card Issuing in Door Card DOOR PHONE Door Card Card Reader Setting state Apply 2 Press Apply to enter the state of deleting card 39 Submit Success Return 3 Put IC card on the Reader Sensing Area and make sure the reader responded 4 Choose Normal in the Card Reader Setting DOOR PHONE Door Card Card Reader Setting State 5 Press Apply Delete the user card Method 2 1 Put Issue Administration Card on the Reader Sensing Area the controller is on the state of deleting 2 Put IC card on the Reader Sensing Area and make sure the reader responded 3 Put Issue Administration Card on the Reader Sensing Area again to sign out deleting then the reader is back to the normal state 5 3 4 Add Remote Visit Data 1 Add new number After finish filling accounts choose the number for the user press Add Access Number Name william Add Department ODM Position ID 0 Access Type Guest 2 Remote Visit Table 40 Access Table Number 7289 Access Code 800 Name william Position Department
13. with root level can browse and set all configuration parameters while user with general level can set all configuration parameters except SIP 1 2 or 2 5 that some parameters cannot be changed such as server address and port User will has different access level with different username and password e Manager mode User Name guest Password guest e Manager mode User Name admin Password admin 4 2 Setting via web browser When 121 121T and PC are connected to network input phone IP address into Internet Explorer CIP address can obtain via pressing sysinfo key http xxx Cif the web log on port is not 80 standard port then need input http otherwise it will show can not find a server You can see the web management interface login screen Cas below image Enter the user name and password and click on the Logon button then can enter into the set menu User Password Language English X you do not save the settings you changed next power boot it will back to the previous state unchanged If you want to save the settings after you made the change please click Maintenance Config save then all are saved in the process the phone will immediate effect without reboot 4 3 WEB Page Functional Explanation 4 3 1 BASIC 4 3 1 1 Status t BASIC LA TEHE Lore prn D La
14. 1022 3 4 5 71 91 5 2 oj I121 121T Door Phone User Manual Safety Notices 1 Please use the specified power adapter If special circumstances need to use the power adapter provided by other manufacturers please make sure the voltage and current provided in accordance with the requirements of this product meanwhile please use the safety certificated products otherwise may cause fire or get an electric shock When using this product please do not damage the power cord or forcefully twist it Stretch pull or banding and not to be under heavy pressure between items Otherwise may cause the power cord damage thus lead to fire or get an electric shock 2 Before use please confirm the temperature and environment humidity suitable for the product work Move the product from air conditioning room to natural temperature which may cause this product surface or internal components produce condense water vapor please open power use it after waiting for this product is natural drying 3 Non technical staff not remove or repair improper repair or may cause electric shock fire or malfunction etc Which can lead to injury accident and also can cause your product damage 4 Do not use fingers pins wire and other metal objects foreign body into the vents and gaps It may cause current through the metal or foreign body which even cause cause electric shock and injury accident If any foreign body or objection fall into the
15. 5W 48V 380mA 10 100BASE TX s Auto MDIX RJ 45 Keep press key in 7 seconds PORT to play IP Recommended Cable HSYV or better Bassus Always on and Always close highest at 30V 1A AC DC 12V 500mA DC 922 Support EM 4100 125Khz Optional Reader Optional 26bit M1 Card 13 M1 Card 13 56 Notsuppot Notsuppot RM NM Material Stainless steel cast iron pan Operating Temperature 40 C to 70 Working Condition 5 Relative Humidity Storage Temperature 40 C to 70 Structure Size and Weight Overall Dimension 230 125 76 mm Packet 310 175 115 mm Weight 2 1 Kg Protection Level Water proof Damp proof 5 1 2 Basic Feature Support G 711 G 729 codec Support SIP 2 0 RFC3261 and related RFC Unlock function Swipe or communication Water Proof and Dust Proof Visitor message Calling indoor extension for two way conversation Software upgrading on line 5 1 3 Schematic Diagram Intercom call Button 121 WEB remote management of Terminal malfunction or status Housing ee Speaker o 2 3 Numeric 5 6 7 8 9 ord and dialing Intercom Button MIC 121 5 2 Owner Remote Opens Voice Access Controller by VOIP Phone 1 Owner calls the Voice Access Controller by VOIP Terminal 2 the Voice Access Controller answers the call automatica
16. Fwd On Code Always CFwd Off Code Busy CFwd On Code Set the Busy CFwd Code when you choose to disable the busy forward function on your phone it will send message to the server and the server will turn off the function immediately oet the No Answer CFwd On Code when you choose to enable the on answer forward function on your phone it will send message to the server and No Answer CFwd On the server will turn on the function immediately Code When there are calls to the extension the server will forward it to the set number automatically based the forward type And the IP phone will not show the record in the call history anymore set the No Answer CFwd Off Code when you No Answer CFwd Off choose to disable the busy forward function on your Code phone it will send message to the server and the server will turn off the function immediately Set the Anonymous On Code When you choose to enable the anonymous call function on your IP Anonymous On Code phone it will send information to the server and the server will enable the anonymous call function for your IP phone automatically Set the Anonymous Off Code When you choose to disable the anonymous call function on your IP Anonymous Off Code phone it will send information to the server and the server will disable the anonymous call function for your IP phone automatically Configure server detection type if its option phone will send option SIP message to server
17. able ID card database display the card number and Issuing Date 4 3 5 3 Call Log Delete Administrator CALL LOG LANGUAGE Call Information Start Time Duration Peer Calls Type January 23 16 00 1 second s 901 SIPI Placed NETWORK January 23 15 24 2 spondis 9501 5 1 Placed January 23 14 47 1 second s 901 SIPI Placed January 23 14 18 second s 901 Placed January 23 11 55 1 second s 901 SIPI Placed January 23 11 35 2 second s 901 SIPI Placed January 23 11 09 1 seconds 001 SIFI Haced January 23 09 57 1 second s 7286 SIP Received January 23 09 47 seconds 901 SIFI Placed January 23 09 18 1 second s 901 SIPI Placed January 22 18 47 19 second s 201 SIP1 Placed January 22 18 17 D second s 901 SIPI Placed 271 Fil zd Display call history Maximum 2100 call historythe earlist excessed history will be deleted automatically Right Click to export Call Log in CSV format Call Loc Explanation otart Time Time for door openning Duration Door Opening Duration time Caller ID Remote Opening Card ID number IC bd N A local Door opening type Local Remote IC card 5 Appendix 35 5 1 1 Specifications SIP 2 0 RFC 3261 Chipset Broadcom 1190 EXE Key Material Steel Direct button Digital Keyboard Support Microphone Amplifier 1580 Voice FDSP SUppot AEC PoE 802 3af Class 0 12 9
18. automatically obtain from DHCP server you need not to manually enter these fields PPPoE when select this mode you must enter the ADSL online account and password You can reference 3 2 1 Network Settings set your network quickly IP Address 192 168 1 114 Subnet Mask 255 255 255 0 IP Gateway 192 168 1 1 DNS Domain Primary DNS 202 96 134 133 Secondary ONS 2OY 96 128 66 Only the phone used in Static mode which need set IP Address Please enter your assigned IP addresses Subnet Mask Please enter your assigned subnet mask IP Gateway Please enter your assigned a default gateway address DNS Domain Set the DNS domain suffix When the user input in the DNS domain name address and could not resolute after put this domain behind the domain name address then the phone will go to resolve Primary DNS Please enter your DNS service address Secondary DNS Please enter your spare DNS service address Service Name SS User Password Only when phone use PPPoE mode need to set Server Name service name e g PPPoE Service provider has no special requirements this name can be treated as default value Please enter your ADSL account Please enter your ADSL code Note 1 After setting parameters need click apply to make it effective 2 f changed IP web page must have no longer responding at this time should enter the new address in the address bar can be connected to the phone 3 If system
19. ble Keep Authentication System will take the last authentication field which is passed the authentication by server to the request packet It will decrease the server s repeat authorization work if it is enable Enable Long Contact Keep Authentication Configure Click to Call Need the actual software application support speech codec Codec Set to use automatically TCP protocol to guarantee Compatible with special server Support the special SIP server when phone receives the packets sent from server phone will use the source IP address not the address in via field Set to make quotation mark to display name as the phone sends out signal in order to be compatible with server Enable user phone by selecting it it is contained in Enable the invite sip message in order to be compatible with server Enable the missed call log by it the phone will save the missed call log into the call history record and display the missed calls on the idle screen or won t save the missed call log into the call history record and display the missed calls on the idle screen Enable BLF List Configure BLF List BLF List can monitor the state of Enable Click to Call Configure Compatible with special server Enable Display name Quote Enable Missed Call Log 29 multiple accounts BLF List number Configure BLF List number SIP Global Settings Enable the Strict Branch the value of the branch
20. boot and use DHCP to get IP and DHCP server network address are the same with system LAN network address then after server get DHCP IP add 1 to the last of LAN network address meanwhile modify LAN DHCP Server allocate IP address field After system reboot WAN access DHCP log on and DHCP server provided network address is the same as LAN provided then WAN will not be able to get IP access networks 4 3 2 2 Qos Config 121 121T Terminal system support802 1Q P protocol support DiffServ configuration Meanwhile VLAN function can configurate Voice VLA and Data VLAN use different VLAN l System configuration Data can process the signalling Audio stream and system and other data stream with different VLAN ID which let the applications of VLAN is more flexible Below chart is helpful for your understanding the VLAN using advantages not use vL AN After switchboard received the Broadcast Frame transmit to every other port except the send port switchboard Broadcast Frame Lise VLAN After Switchboard received Switchboard the Braadcast Frame only transmit it to other port which belong ta same VLAN with send part Broadcast Frame YLAN 2 VLAN 1_f Broadcast lt gt lt gt Li X Domain Domain ls T osi Chart 2 Broadcast Frame In chart 1 ona two layer switch which not set VLAN any radio frame is forwarded to all the other ports
21. c lock 2 1 2 4 Wiring Relay connection description NO means idle disconnected contact normally open COM means a pin contact middle NC means an idle connected contact normally close Electric lock Electric Jumper Mode of connection power supply lock JP39 mode Inside Driver NC amp OUT Lock Switch Outside Lock Switch _ P Supply 12V 2A Ei For power lock external voltage Inside Driver 1 x 6 E NC COM NO SIN 5 rum Inverse Lock Switch Lock Electric lock power Electric Jumper mode of connection supply mode lock JP39 NC COM NO Outside Inverse Driver Lock Switch d P Supply 12V 2A For power lock external voltage i21 121T J Outside di External Power SI 5 amp G i Driver NCCOMNO PUSHGND 12V COM NI Lock Switch 2 2 Quick Setting I21 121T Provide a complete function and parameter setting users may need to have the network and SIP protocol knowledge for understanding the meaning represented by all parameters In order to let I21 121T users can quickly enjoy the high quality speech brought by the IP Phone services and low cost advantage we especially lists the basic and must set options in this section which let users can real time started without understanding complex SIP protoco
22. e phone address will enable backup proxy server address automatically Configure backup proxy server port Open registration Configure allow prohibit registration Codecs According to the need by navigation on Disable Disable Codecs Enable Codecs Enable Codecs list add or remove coding and can be used by the priority of the up and down navigation keys to change the coding Codecs Advance SIP configuration Choose call forwarding way call forwarding default Forward Type its close close close call forwarding function busy incoming calls when the phone is busy directly forwarded to the specified number Noanswer incoming calls within a specified time has not been answered then forwarded to the specified number time incoming call will be transferred to the specified number before directly before the forwarding operation machine indicates the caller id If call forward no answer if nobody answer Call Forward No incoming call in Call Forward No Answer Delay Time Answer Delay Time then the calling will be forwarded to specified number For the phone supports the transfer of certain special Transfer timeout features server set interval time between sending bye and hanging up after the phone transfers a call Hus Ne Configure to enable the hotline number number Hot line number opecify Hot Line Number the phone dial the hot line number au
23. en the Daylight Configure the daylight saving time Saving Time Time Change Configure the daylight saving time changing length Length Minute Configure DST the starting month and end month Configure DST the starting week and end week Configure DST the starting date and end date Configure DST the starting hour and end hour Configure DST the starting minute and end minute Manually set the time Manually set the time need firstly disable SNTP service in the above chart year month minute hour second every part need filled into and submit then manual set will succeed 4 3 3 VOIP 4 3 3 1 SIP Config Configure the SIP server here STUN DIAL BASIC SIP Line SEP 1 LIBE Iura Basic gt PHONE SECURITY z Codecs Settings gt amp etiegs SEP Global 5erttings gt gt SIP Confic Field Name Choose which line configuration of the SIP account There are two lines to choose from Select and click Load switch to the line account configuration Basic setup Phone SIP registration status display if the register registration status will show the registered successfully Otherwise is unregistered Server name Name the server Comer Configure SIP register server address support domain form address Configure SIP register server signaling port Configure SIP registration account
24. en the starting port Allocate this port as dynamic allocation RTP Port Quantity Configure the phone allocation RTP Max quantity Default 210 pieces Notice 1 modifying this page need to save and reboot the phone which can make it come into force 2 If change Telnet HTTP port number it s better set bigger port number than 1024 because 1024 port is system reserved port 3 HTTP port number is setas 0 then forbid the HTTP service 4 3 2 4 TIME amp DATE According to their own position configuration time zone and SNTP Server to automatically obtain time and daylight saving time function can also according to their need to manually adjust the time 22 Sinsple Network Time Protocol SMTP Settings be Enable METVWLHRR PHONE Chirk Et E SECURITY Daylight Saving Time Settings s Hamusi Time Settings Field SNTP Time set ____ SNTP Configurate whether enable SNTP server DHCP Time Whether use DHCP dynamic to obtain time after enabling phone will synchronization network time automatically in certain time server address Server address Configure the choice for time zone Synchronous Query inquiry from the server constantly to synchronize default 60 second p
25. ht gt mode the time to 06 00 start Day time Day End Time When select lt Day Night gt mode the time to 18 00 end up Day time server Log server port 0 65535 default 514 Server Enable L Di Enable or Disable the log server Time of Switch server Enable Indoor Use to disable or enable the indoor open Disable Open function Remote Phonebook Number ____ Remote phone number o o When IP phone calls it needs to input authentication code to control voice access controller Access code for visitor When remote phone calls if the number is in access list you can input access code to open the door Authentication code When owner calls controller answer Type of Host automatically when visitor calls controller mute Name Position _____ Card holder s positon Department Cardholdersdepatment Card number RFlIDsnumber aaa To add new visitor add the visitor number in Number and Access Code gt Visitor s Name Position and Department is optional And then Select the ID Card number and Access Type Visitor or Owner Press lt Add gt key to add new visitor The visitor can call the door phone and input the access code to open the door or use ID card to open the door Maximum 100 visitors To modify visitor data click Delete or Modify key to delete modify the visitor data all data can be modified e
26. ll 11 3 3 End Call Configurate shortcut as Release key to end the call 3 4 Call Records 121 121T provides 100 missed calls received calls dialed Calls records When the storage space used then will update the earnest records Then the phone power of or reboot all the call records will disappear Can check all these three type call records on WEB Basic gt call log page 3 5 Door Open Operation Through the following four ways to open the door 1 Input the local password on the keyboard to open the door 2 he door phone call the owner the owner enter the remote password to open the door 3 Owner other phone call the door then enter the access code and remote password to open the door 4 Use RFID to open the door The access code input errors by low frequency short chirp prompt to door phone and remote user input error will be prompted by low frequency sirens sound Password input error is prompted by high frequency chirp input successfully will be prompted by high frequency sirens sound When the door opens by playing intermittent beeps for prompt Timeout after closing door the prompt will be stoped 4 Page Configuration 4 1 Ways to configure 4 1 1 Ways to configure I21 121T has two different ways to different users e Use web browser recommendatory Use telnet with CLI command 4 1 2 Password Configuration There are two levels to access to phone root level and general level User
27. lly 3 Owner enter Authentication code by VOIP Terminal s keypad to open the door 5 3 Card Management 5 3 1 Issue Card Management 1 Issue issue administration card Input available card number to ID input field choose Issuer then press Add to add Issue Administration Card Add Administrator ID Type 0003408920 Issuer 37 2 Issue Delete administration card Input available card number to ID input field choose Revocation then press Add to add Delete Administration Card Add Administrator ID Add Type 3 Administration Card List Administrator Table ID Date Type 00034089270 December 06 16 47 Issuer 0003462746 December 06 16 48 Revocation 5 3 2 55 User Card Issue User Card method 1 1 Choose Card Issuing in Door Card Door Card Card Reader Setting State Card Issuing v Apply 2 Press Apply to submit new User Card Submit Success Return 3 Put IC card on the Reader Sensing Area and make sure the reader responded 4 Choose Normal in the Card Reader Setting 38 Door Card Card Reader Setting State Apply 5 Press Apply 6 You can check the issuing records in Door Card Table Door Card Table ID Issuing Date 0004770424 December 06 16 42 Issue the User Card Method 2 1 Put Issue Administration Card on the Reader Sensing Area the controller is on the state of issuing 2 Put IC card
28. ls In prior to this step please make sure your broadband Internet online can be normal operation and complete the connection of the network hardware 121 121T factory default network mode is DHCP Thus only connect I21 121T with DHCP network environment then network can be automatically connected 1 Long press keypad 5 Sec then waiting for the phone play the IP address use iDoorPhoneNetwork exe software to search the address 2 Use IP address log onto WEB server to configurate 3 Configurate service provider supplied account on SIP page user name service address and other Registration required parameters 4 Configurate shortcut key on EGS gt Function key page The advice is set to KEY EVENT value is OK keyboard 5 Configurate Door Phone parameter on EGS gt EGS page frame gz iDoorPhone Network Scanner V 1 0 IP Address Serial Humber Description 1 192 158 5 131 121 00 28 59 43 95 2 3 515 282 121 IP Door Phone Refresh 1 device found 121 121T Door Phone Basic Operation 3 1 Answering a Call When calling come 121 121T will ring and configurate the shortcut as OK then can press shortcut and answer the call 3 2 Making a Call Speed Dial Configurate shortcut as Memory key and setup a number then press shortcut can call the configured number immediately Keypad Dialing Configurate shortcut as Dial key Input wanted number on the keyboard then press short to ca
29. n 11 zm 5 ti MC Mr 11 AEG Yl go Er 12 3 0 DOOFr Open Operation MT Um el ee Sa P 12 4 Page 12 Ways TO COMM IGM haa a i a a aa basa SA 12 AVA Ways IO COMIGQUIC DE ate DOM a e etiem MER EU 12 4 1 2 Password CoOnfiguralloh c octets utut i decem Odi cu uem sul UE 12 4 2 Setting via web or E it 13 4 3 WEB Page Functional Explanation nnne nnns 13 LEX NIIS co cc 13 2 3 S qeu E UD EE 13 4 3 1 2 Le Lea ene 14 17 452 a MM UEM LEER d E 17 43 21 WAN CONIO M 17 A 3 2 2 QOS so ntes opens n 19 4 3 2 3 58 POIL o d ooo tecti _ E o caps 21 43242 eo BY fl cae _ ____ __ _____ 22 quM EE EM KM 24 42 3 3 1 SIP COBIIQ oo Ret Or ee On bao ____ 24 4 3 9 2 SEU e toti ica o ide a Lc add 30 FUNCTION KEYS
30. outer 2 1 2 Interface Description 2 1 2 1 Network Power Switch Electric Lock Connection Pr LAN I21 I21T connection 1 Electric LOCK and indoor switch connection La 2 3 4 2 Power supply and Network connection Power supply WAN port LAN port 12 DC 2 1 2 2 Reserve function connection Description of Connectors Function Audio Output interface Use to connect the external Audio PA 14 Use to indicate the call status IO30A Output high level when Ringing or talking Output low level On the other status IO30B Output low level when Ringing or talking Output high level On the other status Tow input detect ports IN1 and IN2 tow Output ports OUT1 and OUT2 Ja 4 m Reserve Groud Input Input Output Output Indicate Port 2 Port 1 ct 2 pe 1 1 2 1 2 1 2 3 4 5 IN OUT OUTI 2 1 2 3 Electric Lock Connection Driver Option JP39 Outside 1 Inside Driver Driver External Power Driving Internal Power Driving Notice JWhen the initial electric current of the lock is less than 500mA 12V you can access to the internal driven mode and use the POE of the Voice Access System or 12V DC to control the the switch of the electric lock When the initial electric current of the lock is more than 500mA 12V you need to access to the external driven mode Use specialized DC power to control the electri
31. phone will automatically learn QoS in switch VLAN ID 802 1p etc configuration value f different phone will Automatically updated to the value in switch synchronization with switches The interval of phone sending data the unit is interval second Default it is 60 seconds QOS Setup J o O WAN VLAN Setup Open WAN Port Open the VLAN of WAN port VLAN Configurate ID value of VLAN range is 0 4095 Configurate the value of Signal 802 1P range is 0 7 Configurate the value of Voice 802 1P the range is 0 7 LAN VLAN Setup ___ LAN Port Vlan Open forbid Port Vlan Same as WAN port ID value Close Disable Port Vlan Open after open it then input different ID value from WAN port Setup ID value of VLAN range is 0 4095 4 3 2 3 Service Port Through this page can set Telnet HTTP RTP port 21 DHCP SERVICE TIMESDATE Service Port Settings NETWORK Web Server Type Hin Ww HTTP Part WOP HTTP5 Port Port PHONE RTP Port Range Start 10000 Port Quantity gt MAINTENANCE 5 SECURITY 5 LOGOUT SERVICE PORT Field Name Description Configurate web browser port default 80 port if want HTTP Port to enhance system security can modify it to non 80 standard port save the data after modification when lo in again please use this way http boo Xxx XXx XXx Configurate telnet port default 23port RTP Port Range Port Configurate phone RTP and op
32. product please stop usage 5 Please do not discard the packing bags or stored in places where children could reach if children trap his head with it may cause nose and mouth blocked and even lead to suffocation 6 Please use this product with normal usage and operating in bad posture for a long time to use this product may affect your health 7 Please read the above safety notices before installing or using this phone They are crucial for the safe and reliable operation of the device Table of Content 1 AcQqualnt i2 dub diet 5 Ii E 5 12 9 wg oan OI ENS M 5 2 oldit USINO eotea ERN 5 2 1 Connect power supply and 5 2 126o0nhecb 1 sesh cai deepest breui E 5 Interface ione eese tutum ae ee eee es 6 2 1 2 1 Network Power Switch Electric Lock Connection 6 2 1 2 2 Reserve function connection SAO Wd M MM MEM 6 2 1 2 3 Electric Lock Connection Driver 8 2 1 2 24 VV ee 9 2 2 QUICK SEINO Ir mU UE 10 3 121 121T Door Phone Basic Operatio
33. signaling port Configure the SIP registration account Authentication Configure the SIP registration account password Password SIP User Configure the number registered on IP server Enable Registration Configurate to allow prohibit the registration WAN Connection Mode Static IP Static IP Address 192 158 1 114 IP Gateway 192 168 1 1 Server Address 192 168 1 2 Account SILLE Phone Number 4113 Registration Enabled Show your manual configuration details Select DHCP MODE click NEXT can simple SIP parameter defaulted as 1 line And browse configuration items Click BACK return to the last page specific operation same as Static IP MODE Select PPPoE MODE click NEXT can simply configurate online account and password and SIP parameter defaulted as 1 line and browse configuration items Click BACK return to the last page specific operation same as Static IP MODE PPPoE Settings Service Name Iser Password Server name service name e g PPPoE service provider has no special requirements the name as the default value is ok Please enter your ADSL account Please enter your ADSL password Note After the above operation is completed please click Finish 1 button The phone will automatically save the current configuration and reboot After the successfully reboot can use the registered account to make calls 4 3 1 3 Call Log Through this page can check all call out record Call Information
34. tomatically at hands free mode or handset mode after warm line time Hot line delay time Configure hot line delay time Open signal Configure whether to support signaling encryption encryption Signal encryption key Input signal encryption key Open voice Configure whether to support voice encryption encryption Voice encryption key input speech encryption key reply When there is a callin and over time went time unanswered phone will answer it automatically SIP sessions Dialogue timeout Configure dialogue timeout Subscribe information after a successful registration can subscribe others status or voice mails and so on Open subscription Configure MWI number realize sip voice message inform and listen to voice message When there is a new voice message voicemail will flashing lights pick up and press MWI key will automatic call to Voicemail Number voicemail and listen to the voice mail If no new message voicemail light is out Subscribe the packet retransmission timeout you needn t input the conference number Configure meeting room number please contact number your service provider to the meeting room number Set expire time of SIP server register default is 60 seconds If the register time of the server requested is longer or shorter than the expired time set the phone will change automatically the time into the time recommended by the server and register again oet the DND On Code
35. u must enter the ADSL online account and password You can also reference 3 2 1 Network Settings and set your network quickly Select Static IP MODE click NEXT can simply configurate network address and SIP parameters default as 1 Line and browse configuration items Click BACK return to the last page Static IP Settings IP Address 92 168 1 114 Subnet Mask dog dug Gateway 92 168 1 1 DNS Domain Primary DNS 02 96 134 133 Secondary ONS 02 96 128 58 Back IP Address Please enter your assigned IP addresses Subnet Mask Please enter your assigned subnet mask IP Gateway Please enter your assigned a default gateway address DNS Domain set the DNS domain suffix When the user input in the DNS domain name address and cannot be resolved telephone will add this domain behind the domain name address then go to resolve Primary DNS Please enter your primary DNS server address Secondary DNS Please enter your alternate DNS server address Quick SIP Settings Display Name 113 Server Address 92 168 1 2 Server Port 050 Authentication User 113 Authentication Password SIP User Enable Registration Display Name Configure display name able to do when calling in the called party dont name the caller can show this configuration parameters and allow input English letters Server Address Configure the SIP registration server address Support domain address Configure the SIP registration server
36. uard control Voice Intercom keypad remote to open the door 1 1 121 121T Front 121 Chinese Specification enter the password to open the door 11 233 Or make a calling 6 1 2 Key Description digit keyboard Programmable Can be set to a variety of functions to keyboard meet the needs of different occasions 2 Start Using Before you start to use I21 121T please make the following installation 21 919 1 2 1 Connect the power supply and network 2 1 1 Connect Network In prior to this step please check if your network can work normally and have capacity of broadband internet access 1 Broadband Router Connect network one end with 121 121T WAN port connect the other end with your broadband router LAN port then network hardware connection is completed In most cases you must set your 121 121T network as DHCP mode Please refer to the detailed setting ways 3 2 1 set network ADSL 7 Cable Broadband Miodem Router Internet n 2 wireless broadband router Connect network one end with 121 121T WAN port connect the other end with your ADSL modem LAN port then network hardware connection is completed In most cases If you are using the TV cable broadband you must set your 121 121T network as DHCP mode if you are using ADSL then you must set your 1211211 network as PPPoE mode Please refer to the detailed setting ways 2 1 2 set network ADSL Cable Broadband Miodem R
37. xcept calling number After you set the log server 120T will send log data to the log server Data format lt 8 gt 20 11 17 38 5 0003476426 IC Card 120 IP Door Phone Note 33 e lt 8 gt log level e MAR 20 11 17 38 happen time 5 0003476426 IC Card 120 IP Door Phone logs have include door open time number phone number open door type device 4 3 5 2 Door Card Setting Card Reader Setting State Apply Administrator Table ID Date Type Add Administrator ID Type Issuer Delete Administrator Iv Delete Door Card Table ID Issuing Date Door Card Setting to config the ID card and admin the card issue and delete Door Card Settinc ID Card Status Setting Normal Status Wave card to open the door Card Issuing Status Update the ID card data to phone database Card Revoking Status Delete the ID card data from the database Administrator data table display the Add Administrator Admin Card Number Type Card Issuer and Revocation When the ID Card status is in lt Normal gt wave admin card to enter Add Administrator card issuing mode and then wave the additional cards into the database when the procedure completed wave admin card again to enter Normal status Delete card procedure is 34 MEM same Maximum 10 Admin Card and 100 visitor card To delete Admin Card select the card number and click lt delete gt Door Gard T
Download Pdf Manuals
Related Search