VIZI BEAM 5RX - Amazon Web Services
Contents
1. a User Instructions 4 15 2015 ADJ Products LLC all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ADJ Products LLC logo and identifying product names and numbers herein are trademarks of ADJ Products LLC Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ADJ Products LLC brands and product names are trademarks or registered trademarks of their respective companies ADJ Products LLC and all affiliated companies hereby dis claim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe unsufficient and negligent as sembly installation rigging and operation of this product Europe Energy Saving Notice Energy Saving Matters EuP 2009 125 EC oaving electric energy is a key to help protecting the enviroment Please turn off all electrical products when they are not in use To avoid power consumption in idle mode disconnect all electrical equipment from power when n2. number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper and included in the shipping carton If the unit is under warranty you must provide a copy of your proof of purchase invoice You may obtain a R A number by con tacting our customer support team on our toll free customer support number All packages returned to the service department not display ing a R A number on the outside of the package will be returned to the shipper at the shippers cost ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 6 Important Discharge Lamp Warning Vizi Beam 5RX This fixture is fitted with a discharge lamp which is highly susceptible to damage if improperly handled Never touch the lamp with your bare fingers as the oil from your hands will shorten lamp life Also never move the fixture until the lamps have had ample time to cool Remember lamps are not covered under war i ranty conditions This unit emits intense UV radiation which is harmful to the eyes and skin The intense luminance of the lamp can cause severe damage to the retina Never operate this unit without its covers these covers have been specially designed to shield against UV radiation Epileptic Warning Those suffering from epilepsy should avoid looking directly into the lamp at all times Avoid switching
3. COLOR 14 amp WHITE COLOR INDEXING CLOCKWISE ROTATION 0 255 TILT MOVEMENT 0 255 TILT FINE 3 NE NEN an o3 EFE 1 4 5 ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 28 COLOR WHEEL WHITE WHITE amp COLOR 1 COLOR 1 COLOR 1 amp COLOR 2 COLOR 2 COLOR 2 amp COLOR 3 COLOR 3 COLOR 3 amp COLOR 4 COLOR 4 COLOR 4 amp COLOR 5 COLOR 5 COLOR 5 amp COLOR 6 COLOR 6 COLOR 6 amp COLOR 7 COLOR 7 COLOR 7 amp COLOR 8 COLOR 8 COLOR 8 amp COLOR 9 COLOR 9 COLOR 9 amp COLOR 10 COLOR 10 COLOR 10 amp COLOR 11 COLOR 11 COLOR 11 amp COLOR 12 COLOR 12 COLOR 12 amp COLOR 13 COLOR 13 COLOR 13 amp COLOR 14 190 193 194 255 FAST SLOW NO ROTATION COUNTER CLOCKWISE ROTATION SLOW FAST GOBOS OPEN GOBO 1 GOBO 2 GOBO 3 GOBO 4 GOBO 5 GOBO 6 GOBO 7 GOBO 8 GOBO 9 GOBO 10 GOBO 11 GOBO 12 GOBO 13 GOBO 14 GOBO 15 GOBO 16 GOBO 17 OPEN SHAKING GOBO 1 SHAKING GOBO 2 SHAKING GOBO 3 SHAKING GOBO 4 SHAKING GOBO 5 SHAKING ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 29 Vizi Beam 5RX 80 83 84 87 88 91 92 95 96 99 100 103 104 107 108 111 112 115 116 119 120 123 124 127 128 189 190 193 194 255 0 7 8 127 128 132 133 137 138 141 142 146 147 150 151 155 156 159 160 164 165 168 169 173 174 177 178 182 183 187 ADJ Products LLC www adj com Vizi
4. If you are making your own cables be sure to use standard 110 120 Ohm shielded cable This cable may be purchased at almost all professional sound and lighting stores Your cables should be made with Figure 1 a male and female XLR connector on either end of the cable Also ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 10 Vizi Beam 5RX Set Up remember that DMX cable must be daisy chained and cannot be split Notice Be sure to follow figures two and three when making your own cables Do not use the ground lug on the XLR connector Do not con nect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR s outer casing Grounding the shield could cause a short circuit and erratic behavior COMMON DMX512 DMX512 IN 3 PIN XLR DMX 3 PIN XLR Figure 2 XLR Male Socket XLR Female Socket I 1 I I 1 Ground 2 Cold I I 1 1 I 1 1 I Figure 3 XLR Pin Configuration I I 2 Cold l 1 Ground Pin 1 2 Ground Pin 2 Data Compliment negative I I I Pin 3 Data True positive Special Note Line Termination When longer runs of cable are used you may need to use a terminator on the last unit to avoid erratic behavior A terminator is a 110 120 ohm 1 4 watt resistor which is con nected between pins 2 and 3 of a male XLR connector DATA and DATA This unit is inserted in the fem
5. Beam 5RX Instruction Manual Page 37 Vizi Beam 5RX Lamp Replacement Place the new lamp into the lamp recess Figure 5 Figure 5 5 See illustration below Adjust the lamp using a slotted flat head screwdriver until it is centralized Figure 6 6 Reinstall the fan and secure it then replace and secure the head covers before reapplying power ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 38 Vizi Beam 5RX Cleaning Fixture Cleaning Due to fog residue smoke and dust cleaning the internal and external optical lenses and mirror should be carried out periodically to optimize light output Cleaning frequency depends on the environment in which the fixture operates l e smoke fog residue dust dew In heavy club use we recommend cleaning on a monthly basis Periodic cleaning will ensure longevity and crisp out put 1 Use normal glass cleaner and a soft cloth to wipe down the out side casing Use a brush to wipe down the cooling vents and fan grill 3 Clean the external optics and mirror with glass cleaner and a soft cloth every 20 days 4 Clean the internal optics with glass cleaner and a soft cloth every 30 60 days 5 Always be sure to dry all parts completely before plugging the unit back in Vizi Beam 5RX Trouble Shooting Trouble Shooting Listed below are a few common problems that you may encounter with solutions N No light output from the unit 1 Be sure the ex
6. MACROS MACRO 31 PAN TILT MACRO SPEED FAST SLOW COLOR TIME FAST SLOW FAST BEAM TIME FAST SLOW FAST GOBO TIME FAST SLOW FAST PAN TILT MOVEMENT SPEED FAST SLOW SPECIAL FUNCTIONS NO FUNCTION PAN TILT FAST MODE PAN TILT NORMAL MODE BLACKOUT WITH PAN TILT MOVE ENABLED BLACKOUT WITH PAN TILT MOVE DISABLED BLACKOUT WITH COLOR CHANGE ENABLED BLACKOUT WITH COLOR CHANGE DISABLED BLACKOUT WITH GOBO CHANGE ENABLED BLACKOUT WITH GOBO CHANGE DISABLED LAMP ON PAN TILT RESET COLOR WHEEL RESET ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 33 Vizi Beam 5RX Channel 19 Value 160 169 170 179 180 199 200 209 210 219 220 229 230 239 240 255 19 Channel DMX Mode Function SPECIAL FUNCTIONS GOBO WHEEL RESET SHUTTER PRISM amp PRISM ROTA TION FROST FOCUSE RESET NO FUNCTION RESET ALL BLACKOUT WITH PAN TILT COLOR GOBO CHANGE ENABLED BLACKOUT WITH PAN TILT COLOR GOBO CHANGE DISABLED LAMP OFF NO FUNCTION ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 34 Vizi Beam 5RX Lamp amp Fuse Replacement Caution Always replace with the exact same type lamp and fuse unless otherwise specified by an authorized ADJe service technician Replacing with anything other than the specified part can damage your unit and will void your manufactures warranty Warning If you continue to blow lamps or fuses STOP using the unit Contact custome
7. entire instrument is sent it must be shipped in it s original package No accessories should be shipped with the product If any accessories are shipped with the product ADJ Products LLC shall have no liability whatsoever for loss of or damage to any such accessories nor for the safe return thereof This warranty is void if the serial number has been altered or removed if the product is modified in any manner which ADJ Products LLC concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the ADJ Products LLC factory unless prior written authorization was issued to purchaser by ADJ Products LLC if the product is damaged because not properly maintained as set forth in the instruction manual This is not a service contract and this warranty does not include maintnance cleaning or periodic check up During the period specified above ADJ Products LLC will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of ADJ Products LLC under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of ADJ Products LLC All products covered by this warranty were manufactured after August 15 2012 and bear indentifying marks to that effect ADJ Products
8. the fixture on and off repeatedly in short intervals as this will reduce lamp life and intensity To achieve the intensity associated with discharge lamps these lamps use gas sealed in a high pressure environment to emit a brilliant output Due to the high pressure involved with the construction of the lamp the lamp may explode during prolonged extensive use This risk is increased with age added care is encouraged when dealing with older lamps Extreme caution should be used when operating this or any fixture fitted with a gas discharge lamp Never open this unit while in use VERY IMPORTANT This is for your safety and the life length of the unit The Philips Platinum 5R Discharge lamp has lifetime of 3000 hours ADJ recommends periodically checking the lamp running time When the lamp reaches the 3000 hour mark or close to it we strongly suggest you switch the lamp out Replace the lamp following the instructions on pages 35 38 After replace ing the lamp you must clear the LAMP RUNNING TIME see pages 15 16 FHRS Warning DO NOT use this lamp more then 3000 hours Using the lamp any longer then the set life could seriously damage your unit ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 7 Vizi Beam 5RX Mounting When installing the unit the trussing or area of installation must be able to hold 10 times the weight without any deformation When installing the unit must be secured with a secondar
9. 167 168 203 204 239 240 247 248 255 16 Channel DMX Mode Function PRISM ROTATION EFFECT 14 PRISM ROTATION EFFECT 15 PRISM ROTATION EFFECT 16 PRISM ROTATION EFFECT 17 PRISM ROTATION EFFECT 18 PRISM ROTATION EFFECT 19 PRISM ROTATION EFFECT 20 PRISM ROTATION EFFECT 21 PRISM ROTATION EFFECT 22 PRISM ROTATION EFFECT 23 PRISM ROTATION EFFECT 24 PRISM ROTATION EFFECT 25 PRISM ROTATION EFFECT 26 PRISM ROTATION EFFECT 27 PRISM ROTATION EFFECT 28 PRISM ROTATION INDEX ROTATION CLOCKWISE ROTATION FAST SLOW STOP COUNTER CLOCKWISE ROTATION SLOW FAST FOCUS 0 100 FROST 0 100 SHUTTER amp STROBE SHUTTER CLOSED SHUTTER OPEN LINEAR STROBING SLOW FAST FAST CLOSE SLOW OPEN FAST OPEN SLOW CLOSE RANDOM STROBE OPEN www adj com Vizi Beam 5RX Instruction Manual Page 24 Vizi Beam 5RX Channel 12 MASTER DIMMER 0 255 INTENSITY 096 10096 PAN TILT MACROS ADJ Products LLC Value 0 7 8 15 16 23 24 31 32 39 40 47 48 55 56 63 64 71 Toe 80 87 88 95 96 103 104 111 112 119 120 127 128 135 136 143 144 151 152 159 160 167 168 175 176 183 184 191 192 199 200 207 208 215 216 223 224 231 232 239 240 247 16 Channel DMX Mode Function OFF MACRO 1 MACRO 2 MACRO 3 MACRO 4 MACRO 5 MACRO 6 MACRO 7 MACRO 8 MACRO 9 MACRO 10 MACRO 11 MACRO 12 MACRO 13 MACRO 14 MACRO 15 MACRO 16 MACRO 17 MACRO 18 MACR
10. Beam 5RX Instruction Manual Page 30 19 ViziBeam5RX 19 Channel DMX Mode DMX Mode SS OOOO 6 SHAKING GOBO 7 SHAKING GOBO 8 SHAKING GOBO 9 SHAKING GOBO 10 SHAKING GOBO 11 SHAKING GOBO 12 SHAKING GOBO 13 SHAKING GOBO 14 SHAKING GOBO 15 SHAKING GOBO 16 SHAKING GOBO 17 SHAKING GOBO WHEEL ROTATION FAST SLOW STOP GOBO WHEEL ROTATION SLOW FAST PRISM OPEN PRISM PRISM ROTATION EFFECT 1 PRISM ROTATION EFFECT 2 PRISM ROTATION EFFECT 3 PRISM ROTATION EFFECT 4 PRISM ROTATION EFFECT 5 PRISM ROTATION EFFECT 6 PRISM ROTATION EFFECT 7 PRISM ROTATION EFFECT 8 PRISM ROTATION EFFECT 9 PRISM ROTATION EFFECT 10 PRISM ROTATION EFFECT 11 PRISM ROTATION EFFECT 12 PRISM ROTATION EFFECT 13 ADJ Products LLC Vizi Beam 5RX Value 188 191 192 196 197 200 201 205 206 209 210 214 215 218 219 223 224 227 228 232 233 236 237 241 242 246 247 250 251 255 0 127 128 190 191 192 193 255 0 255 0 255 0 7 8 15 16 167 168 203 204 239 240 247 248 255 19 Channel DMX Mode Function PRISM ROTATION EFFECT 14 PRISM ROTATION EFFECT 15 PRISM ROTATION EFFECT 16 PRISM ROTATION EFFECT 17 PRISM ROTATION EFFECT 18 PRISM ROTATION EFFECT 19 PRISM ROTATION EFFECT 20 PRISM ROTATION EFFECT 21 PRISM ROTATION EFFECT 22 PRISM ROTATION EFFECT 23 PRISM ROTATION EFFECT 24 PRISM ROTATION EFFECT 25 PRISM ROTATION EFFECT 26 PRISM ROTATION EFFECT 27 PRISM RO
11. Beam 5RX System Menu 2 The lamp running time will now be displayed Press MENU to exit 3 To clear the lamp running time when lamp running time is displayed press the ENTER button Either NO or CLea will be displayed 4 Use the UP or DOWN buttons to select CLea and press ENTER The lamp running time will now be cleared You should clear the lamp running time everytime you change the lamp LAMP with this function you can turn the lamp on off while the unit is still powered on 1 Press the MENU button until LAMP is displayed press ENTER 2 The display will show either ON or OFF Press the UP or DOWN buttons to select ON to keep the lamp on at all times or OFF to turn the lamp off while the unit is still powered on 3 Press ENTER to confirm LPND with this function you can turn the lamp on or off while the power is on 1 Press the MENU button until LPND is displayed press ENTER 2 The display will show either ON or OFF Press the UP or DOWN buttons to select ON to keep the lamp on at all times or OFF to turn the lamp off while the unit is still powered on 3 Press ENTER to confirm VER Use this function to display the Software version of the unit 1 Press the either the MENU button until VER is displayed ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 16 press ENTER 2 The display will show the software version DEF Use thi
12. LLC reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore manufactured No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by ADJ Products LLC in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall ADJ Products LLC be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product This warranty is the only written warranty applicable to ADJ Products LLC Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published MANUFACTURER S LIMITED WARRANTY PERIODS Lighting Products 1 year 365 days Limited Warranty Such as Special Effect Lighting Intelligent Lighting UV lighting Strobes Fog Machines Bubble Machines Mirror Balls Par Cans Trussing Lighting Stands etc excludin
13. O 19 MACRO 20 MACRO 21 MACRO 22 MACRO 23 MACRO 24 MACRO 25 MACRO 26 MACRO 27 MACRO 28 MACRO 29 MACRO 30 www adj com Vizi Beam 5RX Instruction Manual Page 25 Vizi Beam 5RX Channel 14 Value 0 255 100 109 110 119 120 129 130 139 140 149 150 159 160 169 170 179 180 199 200 209 210 219 220 229 16 Channel DMX Mode Function 248 255 MACRO 31 BUT US a NN 0 255 FAST SLOW PAN TILT MOVEMENT SPEED FAST SLOW SPECIAL FUNCTIONS NO FUNCTION PAN TILT FAST MODE PAN TILT NORMAL MODE BLACKOUT WITH PAN TILT MOVE ENABLED BLACKOUT WITH PAN TILT MOVE DISABLED BLACKOUT WITH COLOR CHANGE ENABLED BLACKOUT WITH COLOR CHANGE DISABLED BLACKOUT WITH GOBO CHANGE ENABLED BLACKOUT WITH GOBO CHANGE DISABLED LAMP ON PAN TILT RESET COLOR WHEEL RESET GOBO WHEEL RESET SHUTTER PRISM amp PRISM ROTA TION FROST FOCUSE RESET NO FUNCTION RESET ALL BLACKOUT WITH PAN TILT COLOR GOBO CHANGE ENABLED BLACKOUT WITH PAN TILT COLOR GOBO CHANGE DISABLED ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 26 16 Channel DMX Mode Function Vizi Beam 5RX Channel Value 16 SPECIAL FUNCTIONS LAMP OFF NO FUNCTION 230 239 240 255 ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 27 Vizi Beam 5RX 19 Channel DMX Mode Vizi Beam 5RX 19 Channel DMX Mode Value Function Function 0 255 PAN MOVEMENT COLOR WHEEL
14. OTICE The suitable enviromental temperature for this light ing fixture is between 25 C to 45 C Do not place this lighting fixture in an enviroment where the temperatures are under or above the temperatures stated above This will allow the fixture to run at its best and help prolong the fixture life 1 Clamp 2 Omega holders 3 Quick lock fastener Screw one clamp each via a M12 screw and nut onto the Omega holders Insert the quick lock fasteners of the first Omega holder into the respective holes on the bottom of the Vizi Beam 5RX Tighten the quick lock fasteners fully clockwise Install the second Omega holder Pull the safety cable through the openings located on the base plate and over the trussing system or a safe fixation spot Insert the end in the carabine and tighten the safety screw ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 9 Vizi Beam 5RX Set Up Power Supply The ADJe Vizi Beam 5RX contains a electronic bal last which will auto sense the voltage when it is plugged into the power source With the electronic ballast you do not need to worry about wall voltage this unit can be plugged in anywhere DMX 512 DMX is short for Digital Multiplex This is a universal pro tocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers A DMX controller sends DMX data instructions from the controller to the fix ture DMX data is s
15. TATION EFFECT 28 PRISM ROTATION INDEX ROTATION CLOCKWISE ROTATION FAST SLOW STOP COUNTER CLOCKWISE ROTATION SLOW FAST FOCUS 0 100 FROST 0 100 SHUTTER amp STROBE SHUTTER CLOSED SHUTTER OPEN LINEAR STROBING SLOW FAST FAST CLOSE SLOW OPEN FAST OPEN SLOW CLOSE RANDOM STROBE OPEN www adj com Vizi Beam 5RX Instruction Manual Page 31 Vizi Beam 5RX Channel 12 MASTER DIMMER 0 255 INTENSITY 096 100 PAN TILT MACROS ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 32 Value 0 7 8 15 16 23 24 31 32 39 40 47 48 55 56 63 64 71 12 19 80 87 88 95 96 103 104 111 112 119 120 127 128 135 136 143 144 151 152 159 160 167 168 175 176 183 184 191 192 199 200 207 208 215 216 223 224 231 232 239 240 247 19 Channel DMX Mode Function OFF MACRO 1 MACRO 2 MACRO 3 MACRO 4 MACRO 5 MACRO 6 MACRO 7 MACRO 8 MACRO 9 MACRO 10 MACRO 11 MACRO 12 MACRO 13 MACRO 14 MACRO 15 MACRO 16 MACRO 17 MACRO 18 MACRO 19 MACRO 20 MACRO 21 MACRO 22 MACRO 23 MACRO 24 MACRO 25 MACRO 26 MACRO 27 MACRO 28 MACRO 29 MACRO 30 Vizi Beam 5RX Channel Value 248 255 0 255 0 254 255 0 254 255 0 254 255 0 255 0 49 50 59 60 69 70 79 80 89 90 99 100 109 110 119 120 129 130 139 140 149 150 159 19 Channel DMX Mode Function PAN TILT
16. ale XLR connector of the last unit in your daisy chain to terminate the line Using a cable terminator ADJ part number Z DMX T will decrease the possibilities of erratic behavior 120 Ohm 1 4 W between PIN 2 DMX and PIN 3 DMX of the last fixture Figure 4 Termination reduces signal errors and avoids signal transmission problems and interference It is always advisable 5 to connect DMX terminal Resistance ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 11 Vizi Beam 5RX Set Up Vizi Beam 5RX System Menu 5 Pin XLR DMX Connectors Some manufactures use 5 pin DMX 512 data cables for DATA transmission in place of 3 pin 5 pin DMX Hadadro fixtures may be implemented in a 3 pin DMX line When inserting stan dard 5 data cables 3 pin line a cable adaptor must be used these adaptors are readily available at most electric stores The chart CACH below details a proper cable conversion Canig _ Channel Mode 3 Pin XLR to 5 Pin XLR Conversion An nna Dainese 3 Pin XLR Female Out 5 Pin XLR Male In HEBES hg Data True signal Pin 3 LED display MENU 6 Hats ler ESE Auto Test lao FEH ese Lamp Running Time LL EH nH Lamp On Off on Lens Poor Lamp On Off Ceo While Power On uie Firmware Version ME Default Reset Display Inverse ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 12 ADJ P
17. d is 3 fixtures maximum for 120V and 6 fix tures maximum for 240V After the maximum fixtures has been reached you will need to use a new power outlet They must be the same fixtures DO NOT mix fixtures ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 5 Vizi Beam 5RX General Instructions To optimize the performance of this product please read these operating instructions carefully to familiarize yourself with the basic operations of this unit These instructions contain important safety information regard ing the use and maintenance of this unit Please keep this manual with the unit for future reference Vizi Beam 5RX Handling Precautions Caution There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty In the unlikely event your unit may require service please contact ADJe During operation the housing may become extremely hot Avoid touch ing the unit with bare hands while in use ADJe will not accept any liability for any resulting damages caused by the non observance of this manual or any unauthorized modification to this unit Vizi Beam 5RX Product Registration The Vizi Beam 5RX carries a one year limited warranty Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A
18. ducts LLC www adj com Vizi Beam 5RX Instruction Manual Page 14 Vizi Beam 5RX System Menu until Yes is displayed press ENTER to confim To deactivate tilt inversion select No and press Enter LED With this function you can have the display back light turn off after 10 seconds 1 Press the MENU button until LED is displayed press ENTER 2 The display will show either ON or OFF Press the UP or DOWN buttons to select ON to keep the LED display on at all times or OFF to switch to have the LED display switch off after 10 seconds 3 Press ENTER to confirm To make you LED display reappear again press any button DISP This function will reverse the display 180 1 Press the MENU button until DISP is displayed press ENTER 2 Press ENTER to flip the display Press ENTER to flip it again Press ENTER when you have made your desired setup TEST This function will run a self test program 1 Press the MENU button until TEST is displayed press ENTER 2 The fixture will now run a self test FHRS This serves two functions displays the lamp running time and clears the lamp running time The lamp running time needs to be cleared after a new lamp has been installed 1 Press the MENU button until FHRS is displayed press ENTER ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 15 Vizi Beam 5RX System Menu Vizi
19. e second to exit OGOB Setting adjustment for the gobo wheel 1 Press the ENTER button for at least 3 seconds then press the UP or DOWN buttons so that oGob is displayed press ENTER 2 Use the UP and DOWN buttons to make your adjustments and then press ENTER to confirm Press the MENU button for one second to exit OPRI Setting adjustment for the prism 1 Press the ENTER button for at least 3 seconds then press the UP or DOWN buttons so that is displayed press ENTER 2 Use the UP and DOWN buttons to make your adjustments and then press ENTER to confirm Press the MENU button for one second to exit ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 19 Vizi Beam 5RX Offset Menu ORPR Setting adjustment for the rotating prism 1 Press the ENTER button for at least 3 seconds then press the UP or DOWN buttons so that orPr is displayed press ENTER 2 Use the UP and DOWN buttons to make your adjustments and then press ENTER to confirm Press the MENU button for one second to exit OFRO Setting adjustment for the frost filter 1 Press the ENTER button for at least 3 seconds then press the UP or DOWN buttons so that oFro is displayed press ENTER 2 Use the UP and DOWN buttons to make your adjustments and then press ENTER to confirm Press the MENU button for one second to exit Setting adjustment for the focus 1 Press the ENTER button for a
20. ent as serial data that travels from fixture to fixture via the DATA IN and DATA OUT XLR terminals located on all DMX fixtures most controllers only have a DATA OUT terminal DMX Linking DMX is a language allowing all makes and models of different manufactures to be linked together and operate from a single controller as long as all fixtures and the controller are DMX compliant ensure proper DMX data transmission when using several DMX fixtures try to use the shortest cable path possible The order in which fixtures are connected in a DMX line does not influence the DMX addressing For example a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line at the beginning at the end or anywhere in the middle Therefore the first fixture controlled by the controller could be the last fixture in the chain When a fixture is assigned a DMX address of 1 the DMX controller knows to send DATA assigned to address 1 to that unit no matter where it is located in the DMX chain Data Cable DMX Cable Requirements For DMX and Master Slave Operation The Vizi Beam 5RX can be controlled via DMX 512 pro tocol The Vizi Beam 5RX can be either a 16 or 19 channel DMX unit The DMX address is set electronically using the controls on the side panel of the unit Your unit and your DMX control ler require a approved DMX 512 110 Ohm Data cable for data input and data output Figure 1 We recommend Accu Cable DMX cables
21. g LED and lamps Laser Products 1 Year 365 Days Limited Warranty excluding laser diodes which have a 6 month limited warranty L E D Products 2 year 730 days Limited Warranty excluding motors PCB boards and power supplies which have a 1 year 365 day Limited Warranty batteries which have a 180 day limited war ranty Only the L E D s carry a 2 year warranty excluding StarTec Series which a carries a 90 Day Limited Warranty ADJ DMX Controllers 2 Year 730 Days Limited Warranty excluding faders and tact switches ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 40 Vizi Beam 5RX Notes ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 41 Vizi Beam 5RX Specifications Model Vizi Beam 5RX Voltage 100 240V 50 60Hz Lamp Philips Platinum 5R Discharge Power Consumption 213W Power Cord Daisy Chain 3 Fixtures Max 120V 6 Fixtures Max 230V Dimensions 15 5 L x 12 75 W x 20 5 H 394mm x 325mm x 522mm Colors 14 Plus White Gobos 17 Spot Weight 42 Lbs 19 kgs Fuse TA DMX 16 or 19 Channels Warranty 1 Year 365 days This lamp has 3000 hour life please see page 7 for more info Auto Sensing Voltage This fixture contains a electronic bal last which will auto sense the voltage when it is plugged into the power source Please Note Specifications and improvements in the design of this unit and this manual are
22. ion of the pan tilt color wheel gobo wheel RGobo Rotating wheel prism R Rotating Prism and focus position Adjustment of the pan home position 1 Press the ENTER button for at least 3 seconds then press the UP or DOWN buttons so that oPAn is displayed press ENTER 2 Use the UP and DOWN buttons to make your adjustments and then press ENTER to confirm Press the MENU button for one second to exit OTLL Adjustment of the tilt home position 1 Press the ENTER button for at least 3 seconds then press the UP or DOWN buttons so that otLL is displayed press ENTER ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 18 Vizi Beam 5RX Offset Menu 2 Use the UP and DOWN buttons to make your adjustments and then press ENTER to confirm Press the MENU button for one second to exit ODNN Setting adjustment for the color wheel 1 Press the ENTER button for at least 3 seconds then press the UP or DOWN buttons so that odnn is displayed press ENTER 2 Use the UP and DOWN buttons to make your adjustments and then press ENTER to confirm Press the MENU button for one second to exit OCOL Setting adjustment for the color wheel 1 Press the ENTER button for at least 3 seconds then press the UP or DOWN buttons so that oCoL is displayed press ENTER 2 Use the UP and DOWN buttons to make your adjustments and then press ENTER to confirm Press the MENU button for on
23. l times ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 3 Vizi Beam 5RX Safety Precautions For Your Own Personal Safety Please Read and Understand This Manual Completely Before You Attempt To Install Or Operate This Unit To reduce the risk of electrical shock or fire do not expose this unit rain or moisture Do not spill water or other liquids into or on to your unit Be sure that the local power outlet match that of the required volt age for your unit Do not attempt to operate this unit if the power cord has been frayed or broken Do not attempt to remove or break off the ground prong from the electrical cord This prong is used to reduce the risk of electrical shock and fire in case of an internal short Disconnect from main power before making any type of connection Do not remove the cover under any conditions There are no user serviceable parts inside Never operate this unit when it s cover is removed Always be sure to mount this unit in an area that will allow proper ventilation Allow about 6 15cm between this device and a wall Do not attempt to operate this unit if it becomes damaged This unit is intended for indoor use only use of this product out doors voids all warranties Always mount this unit in safe and stable matter Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention
24. ot in use Thank you Vizi Beam 5RX Table of Contents Bigierzedsm 3 Introduction RETRO EP 3 Customer SUD ONE 3 Safety PreCautiOns ccccsscccsececeeeeceeeeceeeceueeceucesaueeseeesaeeeseeeees 4 1 5 Handling 6 6 Important Discharge Lamp Warnings 7 MOUNINO 8 9 DMX SetU q 10 12 System 13 17 DMX RTT 17 NR UU 18 20 DIVA 21 34 Fuse 35 Bzlasednis eie fil NO T OUO TT 35 38 migiewess iditi a 35 a E EE E EE ETN 39 Trouble SOONG 39 NOE E M 40 SPECI ALON 42 Please see page 7 for important lamp instructions ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 2 Vizi Beam 5RX General Information Unpacking Thank you for purchasing the Vizi Beam 5RX by ADJ Products LLCe Every Vizi Beam 5RX has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your fi
25. r support for further instructions you may have to return the unit for servicing Continuing to use the unit may cause serious damage Fuse Replacement First unplug the power The fuse holder is located next to the PowerCon connection Using a flat head screw driver unscrew the fuse holder Remove the bad fuse and replace with a new one Lamp Replacement Caution Never attempt to change the lamp while the fixture is plugged in Always disconnect the main power and allow the unit ample time to cool before attempting to replace the lamp Please see page for important information regarding the discharge lamp See the next pages for lamp replacement instruc tions Be sure to follow the proper handling procedures that deal with discharge lamps Vizi Beam 5RX Photometric Chart LUX 770000 220000 55000 Distance m Q 5 0 10 0 20 0 Diameter m 0 41 0 81 1 6 ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 35 Vizi Beam 5RX Lamp Replacement Vizi Beam 5RX Lamp Replacement 1 Remove the fixture head covers using a screwdriver Figure 1 3 Lift the lamp out of its recess as Figure 3 Figure 1 Figure 3 2 Position the head as Figure 2 and remove the lamp cooling fan at the rear of the head 4 Disconnect the lamp and connect the replacement lamp Figure 4 Figure 2 Figure 4 ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 36 ADJ Products LLC www adj com Vizi
26. roducts LLC www adj com Vizi Beam 5RX Instruction Manual Page 13 Vizi Beam 5RX System Menu System Menu When making adjustments press ENTER to confirm your setup then press and hold the MENU button for at least 3 seconds To exit without making any adjust ments press the MENU button The display will lock after 30 seconds press the MENU button for 3 seconds to unlock ADDR DMX Address Setting 1 Press the either the MENU UP or DOWN buttons until ADDR is displayed press ENTER 2 he current address will now be displayed and flashing Press the UP or DOWN buttons to find your desired address Press ENTER to set your desired DMX address CHND rhis will let select your desired DMX channel mode 1 Press the either the MENU button until CHND is displayed press ENTER Either 16CH or 19CH will be displayed 2 Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to confim and exit IPAN Pan Inversion 1 Press the MENU button until IPAN is displayed press ENTER Either Yes or No will be displayed 2 To activate the Pan inversion press the UP or DOWN buttons until Yes is displayed press ENTER to confim To deactivate Pan inversion select No and press Enter ITLT Tilt Inversion 1 Press the MENU button until ITLT is displayed press ENTER Either Yes or No will be displayed 2 To activate the tilt inversion press the UP or DOWN buttons ADJ Pro
27. s function to revert back to the default set tings 1 Press the either the MENU button until deF is displayed press ENTER 2 The display will show the software version RS ET Use this function to reset the unit 1 Press the MENU button until RSET is displayed press ENTER 2 The fixture will now reset Vizi Beam 5RX DMX Control Universal DMX Control This function allows you to use a univer sal DMX 512 controller A DMX controller allows you to create unique programs tailored to your individual needs 1 The Vizi Beam 5RX has 2 DMX channel modes 16 channel mode and 19 channel mode See pages 21 34 for detailed description of the DMX traits 2 To control your fixture in DMX mode follow the set up procedures on pages 10 12 as well as the set up specifications that are included with your DMX controller 3 Follow the instructions on page 14 to select your desired DMX channel mode and to set the DMX address 4 Use the controller s faders to control the various DMX fixture traits 5 For longer cable runs more than a 100 feet use a terminator on the last fixture 6 For help operating in DMX mode consult the manual included with your DMX controller ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 17 Vizi Beam 5RX Offset Menu Offset Menu To enter the Offset Menu press the ENTER button for at least 3 sec onds In this submenu you are able to adjust the home posit
28. subject to change without any prior written notice ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 42 ADJ Products LLC 6122 S Eastern Ave Los Angeles CA 90040 USA Tel 323 582 2650 Fax 323 725 6100 Web www adj com E mail info americandj com A D J Supply Europe B V Junostraat 2 6468 EW Kerkrade Netherlands service adjgroup eu www adj eu youtube com adjlighting Tel 31 45 546 85 00 Fax 31 45 546 85 99 Follow Us On Ei m facebook com americandj
29. t least 3 seconds then press the UP or DOWN buttons so that oFoC is displayed press ENTER 2 Use the UP and DOWN buttons to make your adjustments and then press ENTER to confirm Press the MENU button for one second to exit ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 20 Vizi Beam 5RX 16 Channel DMX Mode Value Function 5 COLOR WHEEL WHITE WHITE amp COLOR 1 COLOR 1 COLOR 1 amp COLOR 2 COLOR 2 COLOR 2 amp COLOR 3 COLOR 3 COLOR 3 amp COLOR 4 COLOR 4 COLOR 4 amp COLOR 5 COLOR 5 COLOR 5 amp COLOR 6 COLOR 6 COLOR 6 amp COLOR 7 COLOR 7 COLOR 7 amp COLOR 8 COLOR 8 COLOR 8 amp COLOR 9 COLOR 9 COLOR 9 amp COLOR 10 COLOR 10 COLOR 10 amp COLOR 11 COLOR 11 COLOR 11 amp COLOR 12 COLOR 12 COLOR 12 amp COLOR 13 COLOR 13 COLOR 13 amp COLOR 14 ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 21 ADJ Products LLC 59 60 61 63 64 127 128 189 190 193 194 255 Vizi Beam 5RX 16 Channel DMX Mode Value Function J WHEEL COLOR 14 COLOR 14 amp WHITE COLOR INDEXING CLOCKWISE ROTATION FAST SLOW NO ROTATION COUNTER CLOCKWISE ROTATION SLOW FAST GOBOS OPEN GOBO 1 GOBO 2 GOBO 3 GOBO 4 GOBO 5 GOBO 6 GOBO 7 GOBO 8 GOBO 9 GOBO 10 GOBO 11 GOBO 12 GOBO 13 GOBO 14 GOBO 15 GOBO 16 GOBO 17 OPEN SHAKING GOBO 1 SHAKING GOBO 2 SHAKING GOBO 3 SHAKING GOBO 4 SHAKING GOBO 5 SHAKING ww
30. ternal fuse has not blown The fuse is located on the bottom panel of the unit 2 Remove the lamp holder and be sure the lamp is seated in its socket properly Occasionally lamps become loose during ship ping be sure the lamp is push in to its socket all the way 3 Be sure the fuse holder is completely and properly seated ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 39 Vizi Beam 5RX Warranty MANUFACTURER S LIMITED WARRANTY A ADJ Products LLC hereby warrants to the original purchaser ADJ Products LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase see specific warranty period on reverse This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought For warranty service you must obtain a Return Authorization number RA before sending back the product please contact ADJ Products LLC Service Department at 800 322 6337 Send the product only to the ADJ Products LLC factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty ADJ Products LLC will pay return shipping charges only to a designated point within the United States If the
31. to cords at plugs convenience recep tacles and the point where they exit from the appliance Cleaning The fixture should be cleaned only as recommended by the manufacturer See page 39 for cleaning details Heat This fixture should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat The fixture should be serviced by qualified service personnel when A Objects have fallen or liquid has been spilled into the appliance B The appliance has been exposed to rain or water C The appliance does not appear to operate normally or exhibits a marked change in performance ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 4 Vizi Beam 5RX Features Philips amp Platinum 5R Discharge Micro Stepping Motors for Smooth Color and Gobo Transitions 2 Modes of DMX 512 Protocol Compatible 16 DMX Channel Mode or 19 DMX Channel Mode Independent Gobo and Color Wheels 17 Static Fixed Gobos Spot 14 Colors Plus White and Split Colors 8 Facet Prism Frost Filter Strobe Effect Built In Pan Tilt Macros Motorized Focus 540 Pan Movement 270 Tilt Movement Pan Tilt Invert Digital Display for Address and Function Setting Power Cord Daisy Chain See below Vizi Beam 5RX Power Cord Daisy Chain With this feature you can connect the fixtures to one another using the PowerCon input and output sockets The quantity that can be connecte
32. w adj com Vizi Beam 5RX Instruction Manual Page 22 Vizi Beam 5RX 80 83 84 87 88 91 92 95 96 99 100 103 104 107 108 111 112 115 116 119 120 123 124 127 128 189 190 193 194 255 0 7 8 127 128 132 133 137 138 141 142 146 147 150 151 155 156 159 160 164 165 168 169 173 174 177 178 182 183 187 16 2 16 Channel DMX Mode DMX Mode d H R 6 SHAKING GOBO 7 SHAKING GOBO 8 SHAKING GOBO 9 SHAKING GOBO 10 SHAKING GOBO 11 SHAKING GOBO 12 SHAKING GOBO 13 SHAKING GOBO 14 SHAKING GOBO 15 SHAKING GOBO 16 SHAKING GOBO 17 SHAKING GOBO WHEEL ROTATION FAST SLOW STOP GOBO WHEEL ROTATION SLOW FAST PRISM OPEN PRISM PRISM ROTATION EFFECT 1 PRISM ROTATION EFFECT 2 PRISM ROTATION EFFECT 3 PRISM ROTATION EFFECT 4 PRISM ROTATION EFFECT 5 PRISM ROTATION EFFECT 6 PRISM ROTATION EFFECT 7 PRISM ROTATION EFFECT 8 PRISM ROTATION EFFECT 9 PRISM ROTATION EFFECT 10 PRISM ROTATION EFFECT 11 PRISM ROTATION EFFECT 12 PRISM ROTATION EFFECT 13 ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 23 Vizi Beam 5RX ADJ Products LLC Value 188 191 192 196 197 200 201 205 206 209 210 214 215 218 219 223 224 227 228 232 233 236 237 241 242 246 247 250 251 255 0 127 128 190 191 192 193 255 255 255 16
33. xture for any damage and be sure all equipment necessary to operate the unit has arrived intact In the event damage has been found or parts are missing please contact our toll free customer support number for fur ther instructions Please do not return this unit to your dealer without contacting customer support first Introduction The Vizi Beam 5RX is a DMX intelligent moving head fixture The Vizi Beam 5RX can be a 16 channel or 19 channel DMX unit The fixture is a DMX controlled unit For best results use fog or special effects smoke to enhance the beams projections During the initial start up or use of this product a light smoke or smell may arise from the unit This is a normal process and is cause by the heat associated with the lamp Customer Support ADJ Products LLCe provides a toll free cus tomer support line to provide help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www adj com for any comments or suggestions Service Hours are Monday through Friday 8 00 a m to 4 30 p m Pacific Standard Time Voice 800 322 6337 Fax 323 582 2610 E mail supportQamericandj com To purchase parts online visit http parts americandj com Warning To prevent or reduce the risk of electrical shock or fire do not expose this unit to rain or moisture Warning This may cause severe eye damage Avoid looking directly into the light source at al
34. y safety attach ment e g and appropriate safety cable Never stand directly below the unit when mounting removing or servicing the unit Overhead mounting requires extensive experience including calculat ing working load limits installation material being used and perodic safety inspection of all installation material and unit If you lack these qualifications do not attempt the installation yourself These installaiton should be checked by a skilled person once a year The Vizi Beam 5RX is fully operational in two different mounting posi tions hanging upside down from a ceiling or set on a flat level sur face To avoid internal damage to the unit never mount the unit on its side as illustrated above Be sure this fixture is kept at least 0 5m away from any flammable materials decoration etc Always use and install the supplied safety cable as a safety measure to prevent accidental damage and or injury in the event the clamp fails see next page Never use the carrying handles for secondary attach ment ADJ Products LLC www adj com Vizi Beam 5RX Instruction Manual Page 8 Vizi Beam 5RX Mounting N
Download Pdf Manuals
Related Search