USER MANUAL - Camboard Electronics
Contents
1. levels often associated with low quality cables e Do not secure the cables in tight bundles or roll the slack into tight coils e Avoid interference from neighboring electrical appliances that may adversely influence signal quality e Position your Kramer SL 12 away from moisture excessive sunlight and dust This equipment is to be used only inside a building It may only be connected to other equipment that is installed inside a building Safety Instructions Caution There are no operator serviceable parts inside the unit Warning Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning Disconnect the power and unplug the unit from the wall before installing Recycling Kramer Products The Waste Electrical and Electronic Equipment WEEE Directive 2002 96 EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled To comply with the WEEE Directive Kramer Electronics has made arrangements with the European Advanced Recycling Network EARN and will cover any costs of treatment recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility For details of Kramer s recycling arrangements in your particular country go to our recycling pages at http www kramerelectronics com support recycling KRAMER SIMPLE CREATIVE TECHNOLOGY Getting Started 2 4 Quick Start This quick2. Our 1 000 plus different models now appear in 11 groups that are clearly defined by function Thank you for purchasing the Kramer MultiTOOLS SL 12 Master Room Controller which is ideal for e Controlling multimedia rooms such as classrooms auditoriums conference rooms and so on while enabling remote control and management of the AV equipment e Production studios rental and staging 2 Getting Started We recommend that you e Unpack the equipment carefully and save the original box and packaging materials for possible future shipment e Review the contents of this user manual Go to http www kramerelectronics com to check for up to date user manuals application programs and to check if firmware upgrades are available where appropriate 1 GROUP 1 Distribution Amplifiers GROUP 2 Switchers and Routers GROUP 3 Control Systems GROUP 4 Format Standards Converters GROUP 5 Range Extenders and Repeaters GROUP 6 Specialty AV Products GROUP 7 Scan Converters and Scalers GROUP 8 Cables and Connectors GROUP 9 Room Connectivity GROUP 10 Accessories and Rack Adapters GROUP 11 Sierra Products l Getting Started 2 1 2 2 2 3 Achieving the Best Performance To achieve the best performance e Use only good quality connection cables we recommend Kramer high performance high resolution cables to avoid interference deterioration in signal quality due to poor matching and elevated noise
3. start chart summarizes the basic setup and operation steps my Pale nel SL 12 Quick Start Guide E This guide helps you install and use your product for the first time For more detailed information go to http www kramerelectronics com support product_downloads asp to download the latest manual A or scan the QR code on the left Step 1 Check what s in the box Y The SL 12 Master Room Controller a 1 Quick start guide A 1 Power supply 12V DC A 4 Rubber feet Step 2 Install the SL 12 Mount the machine in a rack using the RK 13 rack adapter or place on a table Step 3 Connect the inputs and outputs SH RC 4 External IR Connect the IR outputs Connect the GPI O ports Connect the relays Connect the Ethernet Connect the RS 232 Connect the RS 485 not shown Connect the K NET Connect the external iR receivers 9 e 93 3 69 in 2 Motion IR INPUT FUNCTIONALITY Detector 1 A You can use up to two F ower AmpImer J optional RC 4 IR with Speakers pees transmitters as auxiliary control panels and control the unit via two of the three IR INPUTS Screen Step 4 Connect the power Connect the12V DC power adapter to the SL 12 and plug the adapter into the mains electricity Step 5 Operate the SL 12 Operate via the RC keypad IR remote control K NET or ETHERNET 3 Overview Overview The SL 12 is a highly versatile controller that
4. K NET RS 485 IR receiver and external IR commands KRAMER SIMPLE CREATIVE TECHNOLOGY Your SL 12 Master Room Controller 4 Your SL 12 Master Room Controller Figure 1 and Table 1 define the unit ce ABE MO TR T M olz els ola olli olz els ola oli cals cals colr cal E EET O ban cam enn sanle e alo sail pedo ter x Mia r Fe Og F A A A 1 7 Y y y ao TerM_ Pros on nm oeoa 0900 a a 0000000 0000 Odo o geese ee 9900 G5 Master Room Controller SL 12 o e Figure 1 SL 12 Master Room Controller Table 1 SL 12 Master Room Controller Functions Feature Function 1 ETHERNET RJ 45 Connector Connects to the PC or other serial controller through computer networking LAN to control several AV products over Ethernet 2 DEFAULT Recessed Pushbutton Press to reset to factory default definitions IP number 192 168 1 39 Mask 255 255 0 0 Gateway 0 0 0 0 3 IR Output Terminal Blocks Connect to IR emitter cables from 1 to 4 4 GPI O Terminal Blocks Connect to various analog and digital sensors from 1 to 4 5 RELAYS Terminal Blocks Connect to low voltage relay driven devices from 1 to 8 6 RS 232 Terminal Blocks Connect to the RS 232 devices from 1 to 4 7 RS 485 Terminal Block Pins B and A are for R
5. Kramer Electronics Ltd USER MANUAL Model SL 12 Master Room Controller Contents Contents 1 Introduction 2 Getting Started 2 1 Achieving the Best Performance 2 2 Safety Instructions 2 3 Recycling Kramer Products 2 4 Quick Start 3 Overview 4 Your SL 12 Master Room Controller 5 Connecting the SL 12 Master Room Controller 5 1 Using the RC 4 IR transmitter 5 2 IR Input Functionality 5 3 Connecting the RS 232 Interface 5 4 Connecting the RS 485 Interface 5 5 Connecting the Ethernet Port 5 6 Connecting the K NET Port 6 Operating the SL 12 Master Room Controller 7 Technical Specifications Figures Figure 1 SL 12 Master Room Controller Figure 2 Connecting the SL 12 Master Room Controller Figure 3 SL 12 IR Inputs Figure 4 RS 232 Connection Figure 5 RS 485 Connection Figure 6 K NET Pinout Connection Tables Table 1 SL 12 Master Room Controller Functions Table 2 IR Input Functionality Table 3 SL 12 Master Room Controller Technical Specifications Ran ROoOoo0vO00os sn BF UNNNG pd pd N ROvw00 Ju ee Introduction 1 Introduction Welcome to Kramer Electronics Since 1981 Kramer Electronics has been providing a world of unique creative and affordable solutions to the vast range of problems that confront the video audio presentation and broadcasting professional on a daily basis In recent years we have redesigned and upgraded most of our line making the best even better
6. S 485 Pin G may be connected to the shield if required 8 K NET Connector PIN GND is for the Ground connection PIN B and PIN A are for RS 485 and PIN 12V is for powering other units 9 RS 485 TERM Switch Slides down for RS 485 termination slides up for not terminated 10 K NET TERM Switch Slides down for K NET termination slides up for not terminated 11 PROG Switch For service use only 1 First disconnect the power supply and then connect it again while pressing the DEFAULT button The unit powers up and loads its memory with the factory default definitions and erases all stored presets 2 K NET is a proprietary Kramer protocol for interconnecting Kramer units 3 The ground connection is sometimes connected to the shield of the RS 485 cable in most applications it is not connected 4 Note that the SL 12 cannot receive power via the K NET connector but can power other units but not another SL 12 Connecting the SL 12 Master Room Controller Feature Function 12 12V DC 12V DC connector for powering the unit 13 IR INPUTS Built in receiver and Accepts IR remote commands STATUS LED 14 3 5mm Mini Jack Connect to an external IR receiver 1 and 2 15 RELAYS LEDs Illuminate when an relay is active 1 to 8 16 IRLEDs Illuminate when an IR port is active 17 NET LED llluminates when the Ethernet link is active 18 K NET LED Illuminates while tran
7. ULAR PURPOSE SHALL APPLY TO THIS PRODUCT AS PROVIDED UNDER APPICABLE LAW IF ANY PRODUCT TO WHICH THIS LIMITED WARRANTY APPLIES IS A CONSUMER PRODUCT UNDER THE MAGNUSON MOSS WARRANTY ACT 15 U S C A 2301 ET SEQ OR OTHER APPICABLE LAW THE FOREGOING DISCLAIMER OF IMPLIED WARRANTIES SHALL NOT APPLY TO YOU AND ALL IMPLIED WARRANTIES ON THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR THE PARTICULAR PURPOSE SHALL APPLY AS PROVIDED UNDER APPLICABLE LAW Other Conditions This limited warranty gives you specific legal rights and you may have other rights which vary from country to country or state to state This limited warranty is void if i the label bearing the serial number of this product has been removed or defaced ii the product is not distributed by Kramer Electronics or iii this product is not purchased from an authorized Kramer Electronics reseller If you are unsure whether a reseller is an authorized Kramer Electronics reseller please visit our Web site at www kramerelectronics com or contact a Kramer Electronics office from the list at the end of this document Your rights under this limited warranty are not diminished if you do not complete and return the product registration form or complete and submit the online product registration form Kramer Electronics thanks you for purchasing a Kramer Electronics product We hope it will give you years of satisfaction For the latest information on our pro
8. acts as an all in one control processor for control of A V equipment especially projectors and associated equipment in any room such as classrooms boardrooms or auditoriums It streamlines operations and simplifies control by integrating audio video and computer video sources into a centralized system The SL 12 Master Room Controller features e An Ethernet port for controlling several AV products over ETH e 4 general purpose I O ports that can be configured as analog inputs digital inputs or digital outputs for interfacing with a variety of devices such as sensors switches LEDs and relays e 4 bidirectional RS 232 ports that control AV equipment such as projectors LCD and PDP displays power amplifiers switchers and scalers e 8relay contact closure ports that control other room items related to the AV system such as raising and lowering drapes the screen or the projector e IR control on three inputs one built in receiver and two IR inputs on 3 5mm mini jacks and four outputs terminal blocks e IR Learning that learns commands from any IR remote e 1 RS 485 serial port e Compatibility with Kramer Site CTRL software for network remote control and management over the Ethernet port e AK NET control channel that connects compatible user interfaces and supplies power and control data over a single cable e AUSB port for uploading a configuration file e Status LEDs for all functions e Flexible control via Ethernet
9. also available a 15 meter cable and a 20 meter cable 4 You can connect one or two inputs 5 P N C A35M IRR two extension cables are also available a 15 meter cable and a 20 meter cable KRAMER SIMPLE CREATIVE TECHNOLOGY Connecting the SL 12 Master Room Controller 5 Connect the RS 232 ports as follows Connect RS 232 port 1 to the projector Connect RS 232 port 3 to the plasma display 6 Connect the RS 485 to several Kramer matrices for example 7 Connect the Ethernet port to a network 8 Connect the K NET port to any RC device with K NET RC 4 RC 4 External IR Receiver IR DVD Player Lighting System b Relay Motion IRS O Detector 1 Power Amplifier with Speakers Motion Rel Blinds Detector 2 To RC 63DL o Plasma Projector Display Lift Screen Figure 2 Connecting the SL 12 Master Room Controller 1 Not shown in Figure 2 7 Connecting the SL 12 Master Room Controller 5 1 Using the RC 4 IR transmitter You can use up to two optional RC 4 IR transmitters as auxiliary control panels and initiate configured control triggers refer to the K Config guide via the built in IR receiver on the front panel and or via the optional external IR receiver which exists in several cable lengths shown in Figure 2 5 2 IR Input Functionality The SL 12 front panel includes one built in receiver and two IR inputs on 3 5mm jacks shown i
10. ducts and a list of Kramer distributors visit our Web site www kramerelectronics com where updates to this user manual may be found We welcome your questions comments and feedback Caution Safety Warning Disconnect the unit from the power supply before opening servicing P N 2900 000552 Rev 3 Kramer Electronics Ltd Web site www kramerelectronics com E mail info kramerel com P N 2900 000552 REV 3
11. e limited to the terms set forth below Whatis Covered This limited warranty covers defects in materials and workmanship in this product What is Not Covered This limited warranty does not cover any damage deterioration or malfunction resulting from any alteration modification improper or unreasonable use or maintenance misuse abuse accident neglect exposure to excess moisture fire improper packing and shipping such claims must be presented to the carrier lightning power surges or other acts of nature This limited warranty does not cover any damage deterioration or malfunction resulting from the installation or removal of this product from any installation any unauthorized tampering with this product any repairs attempted by anyone unauthorized by Kramer Electronics to make such repairs or any other cause which does not relate directly to a defect in materials and or workmanship of this product This limited warranty does not cover cartons equipment enclosures cables or accessories used in conjunction with this product Without limiting any other exclusion herein Kramer Electronics does not warrant that the product covered hereby including without limitation the technology and or integrated circuit s included in the product will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used How Long Does this Coverage Last Seven years as o
12. e your device using Site CTRL see the Site CTRL and Web Access Online User Guide 1 Available for download at the Kramer Web site www kramerelectronics com 2 The RC 4 is configured via the Kramer K Config software 11 Technical Specifications 7 Technical Specifications The SL 12 technical specifications are shown in Table 3 Table 3 SL 12 Master Room Controller Technical Specifications INPUTS 4 RS 232 RS 485 4 GPI O and K NET on terminal block connectors Ethernet on an RJ 45 connector 1 built in receiver 2 infrared on 3 5mm mini jack connectors 1 USB for programming OUTPUTS 4 infrared 8 relays 36V AC or DC 2A 60VAC maximum on non inductive load and 4 GPI O on terminal block connectors DEFAULT IP SETTINGS IP number 192 168 1 39 Mask 255 255 0 0 Gateway 0 0 0 0 INDICATORS LED indicator for each function POWER SOURCE 12V DC 290mA DIMENSIONS 14 3cm x 12 2cm x 4 4cm 5 6 x 4 8 x 1 7 W D H WEIGHT 0 6kg 1 4lbs ACCESSORIES Power supply OPTIONS BNE 19 rack mount RC 4 remote controller IR emitter cables IR sensor cable 1 Specifications are subject to change without notice 2 P N C A35 IRE 10 two IR Emitter Extension Cables are also available a 15 meter cable and a 20 meter cable 3 P N 95 0104050 12 KRAMER SIMPLE CREATIVE TECHNOLOGY LIMITED WARRANTY The warranty obligations of Kramer Electronics for this product ar
13. f this printing please check our Web site for the most current and accurate warranty information Whois Covered Only the original purchaser of this product is covered under this limited warranty This limited warranty is not transferable to subsequent purchasers or owners of this product What Kramer Electronics will do Kramer Electronics will at its sole option provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty 1 Elect to repair or facilitate the repair of any defective parts within a reasonable period of time free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condition Kramer Electronics will also pay the shipping costs necessary to return this product once the repair is complete 2 Replace this product with a direct replacement or with a similar product deemed by Kramer Electronics to perform substantially the same function as the original product 3 Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty What Kramer Electronics will not do Under This Limited Warranty If this product is returned to Kramer Electronics or the authorized dealer from which it was purchased or any other party authorized to repair Kramer Electronics products this product must be insu
14. n Figure 3 for control via the RC 4 IR INPUTS 1 o 1 2 Figure 3 SL 12 IR Inputs These three IR inputs can be set up differently as defined in Table 2 Table 2 IR Input Functionality Status Operation in K Config None of the external IR receivers are connected RC 4 controls the unit through the built in receiver PH IR Inputs A Ojo 1 2 e Define IR 1 RC 4 as the auxiliary O O device and set the triggers An external IR receiver is connected to IR Input 1 One RC 4 controls the unit through the built in receiver and a second RC 4 unit IR INPUTS 1 STATUS 1 controls the unit through the IR Input 1 O O external IR receiver e Define IR 2 RC 4 as the auxiliary device for the built in receiver and set the triggers e Define IR 1 RC 4 as the auxiliary device for the external IR receiver connected to IR INPUT 1 and set the triggers 1 C A3SM IRR 8 KRAMER SIMPLE CREATIVE TECHNOLOGY Connecting the SL 12 Master Room Controller Status Operation in K Config An external IR receiver is connected to IR Input 2 HA IR Inputs A Do y o One RC 4 controls the unit through the built in receiver and a second RC 4 unit controls the unit through the IR Input 2 external IR receiver e Define IR 1 RC 4 as the auxiliary device for the built in receiver and set the triggers e Define IR 2 RC 4 as the auxiliary device for the external IR receiver connected t
15. n in Figure 5 Figure 5 RS 485 Connection Connecting the Ethernet Port The Ethernet connection of the SL 12 allows you to perform all control functions of the SL 12 over the Internet using a PC running the Kramer Site CTRL control program To connect the SL 12 to a network 1 Connect the Ethernet port of the SL 12 to the Ethernet port on a network hub or network router via a straight cable with RJ 45 connectors 2 Atthe other end connect the Internet to a PC running Site CTRL After connecting the Ethernet port you have to install and configure it For detailed instructions on how to install and configure your Ethernet port see the K Config Guide 1 Available for download at the Kramer Web site www kramerelectronics com 10 KRAMER SIMPLE CREATIVE TECHNOLOGY Operating the SL 12 Master Room Controller 5 6 Connecting the K NET Port The K NET port is wired as shown in Figure 6 K NET PINOUT K NET G B A1N Red 12V Black GND Figure 6 K NET Pinout Connection 6 Operating the SL 12 Master Room Controller You can operate your SL 12 using e AnRC family remote controller To operate your device using an RC remote controller see the Kramer K Config Guide e The optional RC 4 infrared remote control transmitter To operate your device using the infrared remote controller see the User Manual packed with the remote controller e A PC running Site CTRL control software To operat
16. o IR INPUT 2 and set the triggers Two external IR receivers are connected to IR Input 1 and IR input 2 respectively IR INPUTS 1 j Ea One RC 4 controls the unit through the IR Input 1 external IR receiver and a second RC 4 unit controls the unit through the IR Input 2 external IR receiver e Define IR 1 RC 4 as the auxiliary device for the external IR receiver connected to IR INPUT 1 and set the triggers e Define IR 2 RC 4 as the auxiliary device for the external IR receiver connected to IR INPUT 2 and set the triggers The built in IR receiver is disabled Note when using two IR receivers take care to place them in separate locations to prevent one IR receiver accepting transmissions that are sent to the other IR receiver 5 3 Connecting the RS 232 Interface To connect an AV device to the SL 12 using the RS 232 port connect the RS 232 9 pin D sub port on your device to the RS 232 terminal block on the rear panel of the SL 12 as shown in Figure 4 RS 232 Device Ground Rx TX SL 12 RS 232 e Rx 1x GRxTx G RX Tx e rx AO O LiJL2 JIL ILA Figure 4 RS 232 Connection Connecting the SL 12 Master Room Controller 5 4 5 5 Connecting the RS 485 Interface To connect an AV device to the SL 12 using the RS 485 port connect the RS 485 port on your device to the RS 485 terminal block on the rear panel of the SL 12 as show
17. red during shipment with the insurance and shipping charges prepaid by you If this product is returned uninsured you assume all risks of loss or damage during shipment Kramer Electronics will not be responsible for any costs related to the removal or re installation of this product from or into any installation Kramer Electronics will not be responsible for any costs related to any setting up this product any adjustment of user controls or any programming required for a specific installation of this product Howto Obtain a Remedy under this Limited Warranty To obtain a remedy under this limited warranty you must contact either the authorized Kramer Electronics reseller from whom you purchased this product or the Kramer Electronics office nearest you For a list of authorized Kramer Electronics resellers and or Kramer Electronics authorized service providers please visit our web site at www kramerelectronics com or contact the Kramer Electronics office nearest you In order to pursue any remedy under this limited warranty you must possess an original dated receipt as proof of purchase from an authorized Kramer Electronics reseller If this product is returned under this limited warranty a return authorization number obtained from Kramer Electronics will be required You may also be directed to an authorized reseller or a person authorized by Kramer Electronics to repair the product If itis decided that this product should be returned directly
18. smitting over K NET 19 RS 485 LED Illuminates while transmitting receiving on an RS 485 port 20 RS 232 Tx Rx LEDs Illuminate while transmitting receiving on an RS 232 port 1 to 4 21 GPI O LEDS Illuminate while transmitting receiving on a general purpose I O port 1 to 4 22 PROGRAM USB Connector Connect to a computer for unit configuration and firmware upgrading 5 Connecting the SL 12 Master Room Controller To connect the SL 12 as the example in Figure 2 illustrates do the following 1 Connect the RELAY terminal block connectors as follows Connect RELAY 1 and 2 to the projector lift Connect RELAY 3 and 4 to the screen Connect RELAY 5 and 6 to the blinds Connect RELAY 7 and 8 to the lighting system Connect the GPI O ports as follows Connect GPI O 2 to motion detector 1 Connect GPI O 4 to motion detector 2 Connect the IR outputs as follows Connect an IR emitter to IR OUTPUT 1 and attach the emitter to the DVD player Connect an IR emitter to IR OUTPUT 2 and attach the emitter to the power amplifier Connect the IR INPUTS as follows see Section 5 2 Connect IR INPUT 1 to an external IR receiver Connect IR INPUT 2 to an external IR receiver 1 See Section 5 2 2 Switch OFF the power on each device before connecting it to your SL 12 After connecting your SL 12 switch on its power and then switch on the power on each device 3 P N C A35M IRE two IR Emitter extension cables are
19. to Kramer Electronics this product should be properly packed preferably in the original carton for shipping Cartons not bearing a return authorization number will be refused Limitation on Liability THE MAXIMUM LIABILITY OF KRAMER ELECTRONICS UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS IS NOT RESPONSIBLE FOR DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UNDER ANY OTHER LEGAL THEORY Some countries districts or states do not allow the exclusion or limitation of relief special incidental consequential or indirect damages or the limitation of liability to specified amounts so the above limitations or exclusions may not apply to you Exclusive Remedy TO THE MAXIMUM EXTENT PERMITTED BY LAW THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES REMEDIES AND CONDITIONS WHETHER ORAL OR WRITTEN EXPRESS OR IMPLIED TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IF KRAMER ELECTRONICS CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW THEN ALL IMPLIED WARRANTIES COVERING THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTIC
Download Pdf Manuals
Related Search