Bosch WAA 28222 Manual User Guide Pdf
Contents
1. DP E a Gey mi I8 i a 4 HL 4 en SKOA SE Water outlet Water inlet Covers Elbow for fixing the drainage ye Wrench hose in place s depending on model Also required depending on the connection 1 hose clamp 24 40 mm exclusive dealers to connect to a siphon gt page 4 water connection Useful tools Spirit level for installation Wrenches WAF 13 for loosening transport braces gt page 3 and WAF 17 for aligning appliance feet gt page 5 min cm 0 max 100 cm Models Standard Aqua Secure min 60 cm max 100 cm Aqua Stop 0 max 100 cm Available from specialist dealers the after sales service Extension for Aqua Stop or cold water inlet hose approx 2 50 m order no WMZ2380 WZ10130 CZ11350 Z7070X0 Longer inlet hose approx 2 20 m for standard model Removing the transport braces Water CONNECTION depenaing on model Risk of electric shock Do not immerse the Aqua Stop safety device in water contains an electric valve To prevent leaks or water damage observe the instructions in this section Caution only operate the washing machine using cold drinking water Do not connect to the mixer tap of an unpressurised hot water boiler Do not use a used inlet hose Only use the inlet hose supplied or one which was purchased from an authorised specialist dealer Ifin do2. Washing machine Disconnect the washing machine from the power supply service the product number E no and the production number FD of the appliance Dismantle the hoses You will find the identification plate containing z z z j ri this information on the frame of the loading door PA Preparing and installing transport braces when the door is open and in the thickly Product number Production number bordered area of the rating plate on the back of the appliance Aligning the washing machine with a spirit level Turn off the tap ee ee eer Operating instructions Maintenance drain pump You will be charged if a technician is called out even during the warranty period 3 Release the water pressure in the inlet hose gt Operating instructions Maintenance filter in a l l TON You can find your nearest after sales service in the enclosed list Please give the after sales 1 Loosen the lock nut using a wrench by turning it in a clockwise direction water inlet 5 2 Change the height by turning the appliance feet Caution all four appliance feet must be firmly on the ground The washing machine must not wobble Check the alignment of the washing machine with a spirit level and adjust if necessary 1 Remove the two lower covers Please help us to avoid unnecessary call outs by quoting the product and production numbers This will also save you the associated additional costs Aq ua St 0
3. Remove the two lower covers 3 Tighten the lock nut against the housing In doing so hold the foot tight and do not adjust its height Caution the lock nuts on all four appliance feet must be screwed tightly against the housing 2 Affix the two lower transport braces In doing so turn the bend on the hose holders inwards Clamp the mains cable in the holders Tighten the screws Electrical connection The washing machine must only be connected to an alternating current via a properly installed earthed socket The power supply and voltage indicated on the washing machine rating plate must be the same 62 a The connected load and fuse required are specified on the rating plate S Ko m Make sure that lt A N After transportation the transport braces must be removed gt page 3 the mains plug fits the socket A the cable cross section is adequate e To prevent unused detergent from flowing straight into the drain during the next wash Pour the earthing system is properly installed 1 litre of water into compartment II and start the Empty programme If this is necessary the mains cable may only be replaced by a qualified Oo electrician Replacement mains cables are available from the after sales service Technical specifications O Do not use multiple plugs couplings or extension cables Dimensions width x depth x height 60 x 59 x 84 7 cm lf a residual current circuit b
4. 22 25 1 The washing machine must only be connected to an alternating current via a E connection and the tap stalling the appliance i properly installed earthed socket a l aae cen enced ares onc ee D H 4 Appliances with Aqua Stop do not need to be supervised during operation nor secured M Scope Of delve s s caer eee ene nee The power supply and voltage indicated on the washing machine rating plate afterwards by turning off the tap Hose and cable lengths 2 must be the same o The tap only needs to be turned off if you are away from home for a long period e g for E Removing the transport braces 3 The connected load and fuse required are specified on the rating plate o several weeks holiday W Water CONNECION esmases paaa 4 0 E Alignment sousunu anaa a 5 Make sure that O m A N After transportation the transport braces must be removed gt page 3 o ee Se ree ena _ the mains plug fits the socket O lea as when moving home the cable cross section is adequate paer vent mue E oen ijan ilowing a iis the drain during the next wash Pour a A ase a a i l itre of water into compartment II and start the Empty programme Re ee ee A Ea E i EES properly installed O Aqua Stop warranty 00005 T If this is necessary the mains cable may only be replaced by a qualified o electrician Replacement mains cables are available from the after sal
5. or fitted in a cabinet L Recess width of 60 cm required Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets i Installation underneath the worktop Risk of electric shock Instead of the appliance covering plate you must have a metal cover fitted by an expert order no WMZ2340 WZ10090 Recess width of 60 cm required Downloaded From WashingMachine Manual com Manuals Scope of deli ver 4 027012141011010 R0 01110103 Moisture inside the drum is due to final testing Aqua stop otandard Aqua secure Mains cable Water outlet Water inlet Covers Elbow for fixing the drainage Wrench hose in place SS depending on model Also required depending on the connection 1 hose clamp 24 40 mm exclusive dealers to connect to a siphon gt page 4 water connection Useful tools Spirit level for installation Wrenches WAF 13 for loosening transport braces gt page 3 and WAF 17 for aligning appliance feet gt page 5 0 max 100 cm Models Standard Aqua Secure min 60 cm max 100 cm Aqua Stop O max 100 cm Available from specialist dealers the after sales service Extension for Aqua Stop or cold water inlet hose approx 2 50 m order no WMZ2380 WZ10130 CZ11350 Z7070X0 Longer inlet hose approx 2 20 m for standa
6. 7 0 Warran ty only for appliances with Aqua Stop Installation In addition to warranty claims against the vendor from the purchase agreement and to our i 1 appliance warranty we will pay damages under the following conditions instructions 3 Tighten the lock nut against the housing In doing so hold the foot tight and do not adjust its height Caution the lock nuts on all four appliance feet must be screwed tightly against the housing 1 Ifa fault in our Aqua Stop system causes water damage we will reimburse damages caused 2 Affix the two lower transport braces In doing so turn the bend on to private customers the hose holders inwards Clamp the mains cable in the holders Tighten the screws 2 The liability guarantee is valid for the service life of the appliance 3 Itisa prerequisite of all warranty claims that the appliance with Aqua Stop must have been F s set up and connected correctly in accordance with our instructions this also includes a Contents Page Electrical connection correctly fitted Aqua Stop extension original accessories M Safety iNStrUCt ONS o on naunan Our warranty goes not cover defective power cables or fittings between the Aqua Stop Installation surface
7. Read these instructions before switching on the washing machine Also observe the separate Instruction manual Keep all documents for use in the future or for the subsequent owner Downloaded From WashingMachine Manual com Manuals
8. Safety instructions The washing machine is heavy take care when lifting Caution frozen hoses may rip burst Do not install the washing machine in areas exposed to frost or outdoors The washing machine could be damaged Do not lift the appliance by protruding components e g the washing machine door In addition to the instructions provided in this document special regulations from the relevant water and electric utility companies may apply Ifin doubt have a technician connect the appliance Lay hoses and cables in such a way that there is no risk of tripping UREE ONET i E The machine must be stable so that it does not move around The installation Surface must be firm and level Soft floors floor coverings are not suitable Installation on a pedestal A N The feet of the washing machine must be secured with holding brackets order no WMZ2200 WX9756 CZ110600 Z7080X0 Installation on a wood joist floor A N If possible place the washing machine in a corner Screw a water resistant wooden board min 30 mm thick to the floor The feet of the washing machine must be secured with holding brackets order no see above Installation on a platform with drawer order no WMZ20450 WZ20450 Installing the appliance A Install the appliance before connecting it to the power supply e Installation in a kitchenette underneath the worktop
9. arranty we will pay damages under the following conditions Instructions Installation 1 Ifa fault in our Aqua Stop system causes water damage we will reimburse damages caused to private customers 2 The liability guarantee is valid for the service life of the appliance 3 It is a prerequisite of all warranty claims that the appliance with Aqua Stop must have been Contents set up and connected correctly in accordance with our instructions this also includes a Page correctly fitted Aqua Stop extension original accessories M Safety instructions 00005 1 Our warranty goes not cover defective power cables or fittings between the Aqua Stop Installation surface 2 1 connection and the tap Installing the appliance 0 1 4 Appliances with Aqua Stop do not need to be supervised during operation nor secured M Scope OF delivery ss sese srske gas sapaa 2 afterwards by turning off the tap Hose and cable lengths 2 The tap only needs to be turned off if you are away from home for a long period e g for E Removing the transport braces 3 several weeks holiday M Water connection 0 00 ee eee 4 Mm Alignment vex adda nda oe oes ewedee eee 5 M Electrical connection 00 5 E Transportation e g when moving home 6 Technical specifications 6 E After sales service 008 7 Agqua Stop warranty ososan aaa 7
10. ater inlet hose to the tap Caution only tighten the screw connections by hand 2 Open the water tap carefully checking the leak tightness of the connection points Caution the screw connection is under mains water pressure Water outlet E outlet hose Caution do not bend or pull lengthways Height difference between the installation surface and the drain for Aqua Secure and Standard models min 60 cm max 100 cm for Aqua Stop model 0 max 100 cm Outlet in a sink Caution secure the drain hose from slipping out Caution the plug must not block drainage from the sink During pumping check whether the water is draining away quickly enough The end of the drain hose must not be immersed in the water pumped out This risks water being sucked back into the washing machine Outlet into a plastic pipe with rubber bushing or into a drainage pit Caution secure the drain hose so that it cannot slip out Drainage into a siphon Caution the connection point must be secured with a hose clamp 24 40 mm exclusive dealers Standard Alignment h Intense noise formation vibrations and wandering may be the result of incorrect Transportation e g when moving home After sales service Before transporting the washing machine Before you call the after sales service please make sure that you cannot remedy the fault alignment yourself gt Operating instructions What to do if
11. es service Technical specifications Do not use multiple plugs couplings or extension cables Dimensions width x depth x height 60 x 59 x 84 7 cm Saa lf a residual current circuit breaker is used only use a type which displays this Read these instructions before switching on the washing machine symbol Ex Weight 69 83 kg depending on model Also observe the separate Instruction manual Only this symbol guarantees compliance with the currently applicable regulations Keep all documents for use in the future or for the subsequent owner Do not plug in or unplug the mains plug with wet hands Mains connection Nominal voltage 220 240 V 50 Hz Pull the appliance plug out of the socket at the plug only not by the cable ets Sore en m Water pressure 100 1 000 kPa 1 10 bar ual com Manuals Safety instructions Scope of deli ver 4 0 27012141011010 R0 01110102 Moisture inside the drum is due to final testing The washing machine is heavy take care when lifting Caution frozen hoses may rip burst Do not install the washing machine in areas exposed to frost or outdoors The washing machine could be damaged Do not lift the appliance by protruding components e g the washing machine door n addition to the instructions provided in this document special regulations from the relevant water and electric utility companies may apply f in doubt have a technician connect the appliance Lay hoses and cables
12. in such a way that there is no risk of tripping Installation surface The machine must be stable so that it does not move around The installation surface must be firm and level Soft floors floor coverings are not suitable order no WMZ2200 WX9756 CZ110600 Z7080X0 Installation on a wood joist floor If possible place the washing machine in a corner Screw a water resistant wooden board min 30 mm thick to the floor The feet of the washing machine must be secured with holding brackets order no see above Installation on a platform with drawer order no WMZ20450 WZ20450 Installation on a pedestal The feet of the washing machine must be secured with holding brackets Installing the appliance h Install the appliance before connecting it to the power supply Installation in a kitchenette underneath the worktop or fitted in a cabinet Recess width of 60 cm required Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets i Installation underneath the worktop Risk of electric shock Instead of the appliance covering plate you must have a metal cover fitted by an expert order no WMZ2340 WZ10090 Recess width of 60 cm required Downloaded From WashingMachine Manual com Manuals i otandard d EOIN toON M Aqua Stop Aqua Secure Mains cable
13. rd model Removing the transport braces Water connection 027012141011010 R0 0111010 2 Before using the appliance for the first time make sure that you completely remove transport braces and keep them for subsequent transportation Ifyou need to transport the appliance at a later date always re affix the transport braces to prevent damage to the machine gt page 6 Store the screw and sleeve screwed together until they can move freely in the sleeves contains an electric valve To prevent leaks or water damage observe the instructions in this section Caution only operate the washing machine using cold drinking water Do not connect to the mixer tap of an unpressurised hot water boiler Risk of electric shock Do not immerse the Aqua Stop safety device in water Do not use a used inlet hose Only use the inlet hose supplied or one which was purchased from an authorised specialist dealer Ifin doubt have a technician connect the appliance Water inlet E Water inlet hose Caution do not bend squash modify or cut through otherwise its strength is no longer guaranteed Optimum water pressure in the supply network 100 1 000 kPa 1 10 bar When the tap is on the water flow is at least 8 I min f the water pressure is higher than this a pressure reducing valve must be installed Model Aqua Stop Aqua Secure 1 Connect the w
14. reaker is used only use a type which displays this symbol Lx Weight 69 83 kg depending on model Only this symbol guarantees compliance with the currently applicable regulations Do not plug in or unplug the mains plug with wet hands Mains connection Nominal voltage 220 240 V 50 Hz Pull the appliance plug out of the socket at the plug only not by the cable Ue eo a Water pressure 100 1 000 kPa 1 10 bar anual com Manuals After sales service Before you call the after sales service please make sure that you cannot remedy the fault yourself gt Operating instructions What to do if Washing machine You will be charged if a technician is called out even during the warranty period You can find your nearest after sales service in the enclosed list Please give the after sales service the product number E no and the production number FD of the appliance You will find the identification plate containing this information on the frame of the loading door when the door is open and in the thickly Product number Production number bordered area of the rating plate on the back of the appliance Please help us to avoid unnecessary call outs by quoting the product and production numbers This will also save you the associated additional costs Aq ua St 07 0 warran ty only for appliances with Aqua Stop In addition to warranty claims against the vendor from the purchase agreement and to our i i appliance w
15. the plug must not block drainage from the sink During pumping check whether the water is draining away quickly enough The end of the drain hose must not be immersed in the water pumped out This risks water being sucked back into the washing machine Outlet into a plastic pipe with rubber bushing or into a drainage pit Caution secure the drain hose so that it cannot slip out Drainage into a siphon Caution the connection point must be secured with a hose clamp 24 40 mm exclusive dealers Alignment h Intense noise formation vibrations and wandering may be the result of incorrect Transportation e g when moving home alignment Before transporting the washing machine Turn off the tap 2 Drain residual water gt Operating instructions Maintenance drain pump 3 Release the water pressure in the inlet hose gt Operating instructions Maintenance filter in 4 5 CoE 1 Loosen the lock nut using a wrench by turning it in a clockwise direction ie Aligning the washing machine with a spirit level water inlet Disconnect the washing machine from the power supply Dismantle the hoses ba Preparing and installing transport braces 2 Change the height by turning the appliance feet Caution all four appliance feet must be firmly on the ground The washing machine must not wobble Check the alignment of the washing machine with a spirit level and adjust if necessary 1
16. ubt have a technician connect the appliance Water inlet Water inlet hose Caution do not bend squash modify or cut through otherwise its strength is no longer guaranteed Optimum water pressure in the supply network 100 1 000 kPa 1 10 bar When the tap is on the water flow is at least 8 I min f the water pressure is higher than this a pressure reducing valve must be installed Model Aqua Stop Standard Aqua Secure Before using the appliance for the first time make sure that you completely remove transport braces and keep them for subsequent transportation Ifyou need to transport the appliance at a later date always re affix the transport braces to prevent damage to the machine gt page 6 Store the screw and sleeve screwed together 1 Connect the water inlet hose to the tap Caution only tighten the screw connections by hand 2 Open the water tap carefully checking the leak tightness of the connection points Caution the screw connection is under mains water pressure until they can move freely in the sleeves Water outlet gt Water outlet hose Caution do not bend or pull lengthways Height difference between the installation surface and the drain for Aqua Secure and Standard models min 60 cm max 100 cm for Aqua Stop model 0 max 100 cm Outlet in a sink Caution secure the drain hose from slipping out Caution
Download Pdf Manuals
Related Search