User Manual - Comkit Online
Contents
1. INSTACLA MON OFERA Ciz CLEANING CARE amp MAINTENANCE esee Cc Oe SEU soa STEERER EENE WARRANTY E E EE EE ROBAND A US TRA LIA INTRODUCTION Congratulations on your purchase of this quality ROBANDe product With proper care and management your new purchase will give you years of trouble free service By reading these instructions carefully you can ensure that this machine is used and maintained properly helping your new investment to perform well for you now and to continue performing in the many years to come GENERAL PRECAUTIONS This machine must only be operated by qualified person s who are fully versed in the operating and safety instructions described in this manual Servicepersons should be instructed to familiarise themselves with any and all safety instructions described in this manual prior to commencement of any maintenance or service In the case of new personnel training is to be provided in advance These machines should not be operated by persons including children with reduced physical sensory or mental capabilities or lack of experience or knowledge unless they2. ROBAND Manufactured By ROBAND AUSTRALIA PTY LTD OPERATING INSTRUCTIONS BUN WARMER Models M6T M3TS2 Version 1 M3TS1 Version 2 These instructions cover the models of Bun Warmers only Although there are slight variances between models the installation operation care and maintenance procedure is the same for all 11 03 2013 Roband Australia is a wholly Australian owned company and has been manufacturing quality commercial catering equipment for the food service industry for more than 50 years Roband products are engineered and manufactured to the highest standards to provide functionality reliability and durability and our quality products are exported world wide Included in the comprehensive ROBANDe range are Toasters Fryers Milkshake Mixers Rotisseries Food Display Cabinets and much more Roband Australia also acts as the Australian agents for Vitamix Blenders NOAW Meat Slicers RYNO Stainless Benching Ceado Juicers Forge Cookware Robalec Soup Rice Warmers amp Robatherm Urns In addition to a vast range of machines Roband Australia has its own line of commercial cookware and cutlery under the Robinox brand name For a complete set of brochures please contact your nearest authorised dealer or contact Roband directly at our head office Roband Head Office International Agents sydney Australia For additional agents please email Head Office Roband Austral
3. contact your selling agent Please complete the following details and keep this card in a safe place NAME ADDRESS MODEL No SERIAL No DATE PURCHASE NAME OF DEALER PLEASE RETAIN THIS SECTION FOR YOUR RECORDS DO NOT POST ROBAND AUSTRALIA PTY LTD ROBAND A US TR ALIA PYD Page 8 OTHER LEADING PRODUCTS AVAILABLE T PLUS DRINK MIXERS GRILLMAX TOASTERS NOAW Slicers Manufactured Imported in Australia by ROBAND A US TRA LIA Authorised Distributor Agent ROBAND AUSTRALI A PYD
4. gulator knob is not loose or broken rendering the energy regulator inoperable SPECIFICATIONS M6T M3TS1 Power Rating 600 Watts 300 Watts wt 320 mm 170 mm 99 99 Constant research and development may necessitate specification changes at any time ROBAND A US TRA LIA PTYLID Page 6 CIRCUIT DIAGRAM Models M6T 24DV FNFRGY REGULATOR ee SPIKF EGO TOP LLLMLNIS pV 2 i PILET do pa G3 e PILOT LIGHT ENERGY RESGULATGR REAR aPIKF Eco LLLMLNIS P1 EM uM T poA AAV o E PLO O ee ee PILOT LICSI IT a NOTE This circuit diagram has been provided for reference and to assist qualified service and repair agents only Under no circumstances should person s not suitably qualified attempt repairs to any electrical equipment Page 7 ROBAND AUSTRALI A PYD WARRANTY Every care is taken to ensure that no defective equipment leaves our factory and all goods manufactured by us are guaranteed against faulty workmanship and materials for a period of 12 months from the date of purchase Glass lamps and Teflon coatings are NOT included in this warranty Generally all goods claimed under this warranty must be returned to the factory or an authorised
5. have been given supervision or instruction concerning the safe use of the appliance by a person responsible for their safety These machines are heating units and as with any commercial heating unit the surfaces will get hot Always be careful when near an operating Bun Warmer and ensure that any risk to unwary customers or staff is minimised with additional signage If necessary Due to the obvious heat hazard Roband recommends that these units be kept out of reach of children The machine should be disconnected from all power and allowed to cool before cleaning Roband will accept no liability if Non authorised personnel have tampered with the machine The instructions in this manual have not been followed correctly Non original spare parts are used The machine is not cleaned correctly with the right product There is any damage to the unit ROBAND AUS TRA LIA PYD Page 1 PACKAGING All care is taken when packing and Roband ensures that every unit is functional and undamaged at the time of packaging The Package of this Bun Warmer should include 1 One Bun Warmer 2 his Manual 3 Packaging Materials Any damage to the machine as a result of freight must be reported to the Freight Company and to the agent responsible for the dispatch of said unit within 24 hours of receipt No claims will be accepted or entertained after this period C COMPLIANCE C TICK Robande products have been desig
6. ia Pty Ltd 1 Inman Road DEE WHY NSW 2099 Australia Tel 61 2 99 1 1788 Fax 61 29971 1336 Email sales roband com au Web www roband com au Cyprus Fiji Hong Kong Italy New Zealand Papua New Guinea Singapore Switzerland Thailand United Arab Emirates United Kingdom United Catering Equipment Supplies Ph 357 777 777 24 Hotel Equipment Ltd Ph 679 672 0666 Chung Wah Kitchen Machine Ltd Ph 852 2334 5411 World Group Ph 39 0322 83 67 24 Roband New Zealand Ph 649 274 1354 Brian Bell amp Company Pty Ltd Ph 675 325 5411 Jelco Private Ltd Ph 65 5611 988 Burgi Infra Grill Ph 41 418 554 552 Seven Five Distributors Co Ltd Ph 662 866 5858 Technical Supplies and Services Co Ph 971 4343 1100 Metcalfe Catering Equipment Ph 44 1766 830 456 Copyright 2011 Roband Australia Pty Ltd All rights reserved No part of this work may be reproduced or copied in any form or by any means electronic or mechanical including photocopying or posting to a website without the written permission of the publisher The material contained within this document is intended entirely for instructional purposes ROBAND A US TRA LIA CONTENTS INTRODUJO TION GENERAEL uzte2ilslgg c
7. n by cleaning the spikes regularly Even wiping down as often as after each use will help Use a cloth or sponge dampened with warm soapy water to clean the surface A nylon brush or nylon pot scourer can be used to assist in the removal of stubborn build up Be careful to ensure that water does not penetrate into the equipment Never put cold water on a warm or hot cooking surface Do NOT use any caustic cleaning products on the spikes Do not under any circumstances use any metal or abrasive scrubbers or HAZARD Page 5 cleaners on the non stick coating Any stubborn cooking residue should be carefully removed by gently scrubbing with a Nylon scrubber or scraper We recommend the use of Nylon scrubbers After cleaning and drying the spikes should be seasoned lightly by wiping over with a little cooking oil to fill the microporosities in the surface Wipe down the remainder of the machine with a cloth or sponge that is only DAMP with soapy hot water taking care to avoid water entering any part of the unit Although every care is taken during manufacture to remove all sharp edges care should be taken when cleaning and handling the hot dog machine to avoid injury ROBAND AUS TRA LIA PYD TROUBLESHOOTING If the Bun Warmer does not heat up check the following points before calling for service v The unit is plugged in correctly and the power is switched on v The power point is not faulty v The energy re
8. ned and manufactured to comply with any and all specifications set out by the Australian Communications Authority ACA in regards to Electromagnetic Compatibility As testament to such compliance these units bear the C Tick symbol For further information contact the Australian Communications Authority PO Box 13112 Law Courts Melbourne VIC 8010 ROBAND A US TRA LIA PYD Page 2 INSTALLATION Remove all the packaging materials and tape as well as any protective plastic from the machine Clean off any glue residue left over from the protective plastic Place the bun warmer on a firm level surface in the required position Before connecting the unit to the power supply ensure that all the controls are in the OFF position National Standards exist outlining the positioning spacing and ventilation requirements when installing new appliances These Standards should be consulted and new equipment should be installed accordingly In any situation where specifications allow a distance of less than 100mm we would still recommend that a well ventilated air gap of not less than 100mm be maintained If the machine is near particularly heat sensitive materials common sense should be employed in determining sufficient distancing Plug the unit into a standard single phase 10Amp power point OPERATION M6T The left hand energy regulator marked B controls the back three spikes while the right hand regulator marked F contr
9. ols the front three spikes Turn one or both energy regulator knobs to HI as required This will heat the spikes Push a bun over each spike and leave until warm Slide buns off and insert hot dogs Lower settings can be selected on the energy regulators to cycle the elements as desired M3TS1 This unit operates the same as the except that there is only one energy regulator in the hot dog warmer This regulator operates all the spikes on the machine PLEASE NOTE This ROBANDe machine is supplied with Teflone coating to the spikes The coating utilised is the best quality currently available from Dupont Ltd and is applied by a specialist in such coatings However neither Roband Australia Pty Ltd nor Dupont Ltd are able to guarantee the performance or longevity of these coatings other than for faulty workmanship This is due to the protective coating nature of the product and its use in unknown commercial environments It is important that Teflon coated spikes do not overheat or else discolouration or degradation of the Teflon coating can occur Do not leave Teflon coated spikes on High power settings for periods longer than 5 minutes unless constantly in use Teflon coating is not covered under warranty ROBAND Page 3 AUS TRA LIA PYD SAFETY GENERAL SAFETY This machine contains no user serviceable parts Roband Australia one of our agents or a similarly qualified person s should carry out any and all repai
10. rs Any repair person s should be instructed to read the Safety warnings within this manual before commencing work on these units steel cutting processes such as those used in the construction of this AMA machine result in sharp edges Whilst any such edges are removed to the best of our ability it is always wise to take care when contacting any edge Particular care should be taken to avoid contact with any steel edge and warnings should be given in regards to the danger of such contact to any repair or maintenance person s prior to commencement of any servicing Do not remove any cover panels that may be on the machine This unit can get very hot Ensure everyone is aware that the machine is operating and take care to avoid contact with hot surfaces Always ensure the power cable is not in contact with hot parts of the machine when in use Ensure that any damaged power cord is replaced before further use Keep this unit out of reach of children ROBAND Page 4 AUSTRALI A PTYLID CLEANING CARE amp MAINTENANCE Attention to regular care and maintenance will ensure long and trouble free operation of your Bun Warmer Although scheduled servicing is not required we do recommend you adopt a program of regular maintenance to ensure that the Bun Warmer is clean and functional and to avoid inadvertently damaging the unit Daily cleaning should be considered mandatory for all cooking equipment Avoid food carbonisatio
11. service agent freight prepaid for inspection Any part deemed to be defective will be replaced however no claims will be entertained for parts damaged in transport misused or modified in any way without our approval For machines that are not considered to be portable e g food bars rotisseries large hotplates and some bain maries on site warranty service will be provided in capital city metropolitan areas only In all other locations the customer is responsible for all travelling time service call costs and payment for this will be required prior to the commencement of the repair The labour costs to actually repair the fault will be met by this company This company reserves the right to reject a claim for warranty if it is not completely satisfied with the circumstances under which it occurred and any costs incurred for false claims or faults due to incorrect usage etc are the responsibility of the claimant Under no circumstances shall Roband Australia Pty Ltd or any subsidiary company or Agent be liable for loss of profit or damage to other equipment and property Generally authorised service agents are located in all areas which have authorised distribution dealers For the name of your nearest Australian authorised service agent please contact ROBAND AUSTRALIA PTY LTD Warranty Number 1800 268 848 for Australian Residents Phone 61 2 9971 1788 Fax 61 2 9971 1336 Email Warranty roband com au All other countries please
Download Pdf Manuals
Related Search