TDA080 - Tape Dispensers
Contents
1. Other sizes avalaible TROUBLESHOOTING When problems occur carry out the following procedures If the tape dispenser does not operate normally after following the troubleshooting procedures contact your supplier or Start International No power light Tape does not feed Unplug unit and plug in again Turn power switch off wait 5 seconds turn unit back on Check that front panel is closed securely and safety interlock is engaged Verify that the fuse has not blown Check that Tape Length Display is 40mm or greater Tape does not feed when unit is in AUTO mode Check that Auto Manual Switch is in correct position Turn Interval Knob all the way counterclockwise Wait 1 full second after tape is cut before removing tape from machine Blade sticks in closed position Apply silicon oil to 242 Blade Roller Tape is not cut all the way through Replace 279 blade with 279S serrated blade PREVENTIVE MAINTENANCE WEEKLY Wipe feed rollers and blade with proper solvent to remove adhesive build up MONTHLY Apply silicone oil available from Start International to 242 blade roller Inspect pressure rollers and cutting blade for wear All parts are supplied with applicable hardware for assembly 10 06 Part TDADSOP 102 TDAO80P110 TDAO080P202 TDAO80P203 TDAO80P204 TDADS0P205 TDADO80P207 TDAO80P206 TDAO080P208 TDAD80P210 TDAD80P211 TDAO80P212 TDAO080P213 TDADO80P212. DAQ80 START International CONTENTS Read this user s manual before use to ensure proper operation Keep the manual on hand for reference in case there is a problem Warranty Information einen iter eroe teen exte ent sees 2 Repair POLICY ae 2 A ae lenken 3 Fe dTUFeS A A Aa 3 Description of Parts and Functions eeesassossesnssnsnssnsenennennnnsnnsnssnsnennsnnnsnnnsnnsnnsnnsnssnsnssnsnnsnnsnnssnsnnenenn 3 Nd NON 4 NJ Tro ejos CERE 4 Specifications rte ieh EEE 4 Troubleshootitig AAA sel Basen ehe siso a eso epe 5 Preventivo Maintenance eei ente rentis eet ae ein sin 5 Exploded Views Parts Breakdown ara are 6 12 esnctgeadssdessonpeancecsstssinenscoasbecevassdesseantesceecestecosseesets 13 14 WARRANTY POLICY FOR TDA080 DISPENSER START International warrants all parts on the TDAO80 tape dispenser against defects in design materials and work manship for a period of 360 days Parts excluded from this are cutting blade springs pressure rollers these parts are considered wear parts Labor to replace defective parts will be performed at no charge for the first 180 days after date of purchase Warranty does not cover transportation costs Our sole obligation under this warranty is limited to repair replacement or credit of the purchase price at our option for units that do not perform properly the function for which they were designed Warranty repair is contingent upon
3. Feed length can be easily set using thumbwheel controls Hold down shaft increases accuracy by maximizing tape adhesion to the feed rollers The blade is easy to remove and replace Optional serrated blade for hard to cut materials DESCRIPTION OF PARTS AND FUNCTIONS REEL HOLDER HOLD DOWN SHAFT under top cover MODE SELECTION Manual Auto amp Interval TAPE ADVANCE BUTTON TAPE LENGTH DISPLAY NS POWER SWITCH INTERVAL KNOB ALARM Tape Length Display Shows preset feed length Four digit display can be set from 50 9999mm Interval Knob Sets delay time before dispensing next piece e Auto Manual Switch Toggles operating mode between Manual press Tape Advance button to dispense and Auto automatic feed and cut when piece is removed Power Switch Press to turn power On and Off Tape Advance Button Press to feed and cut one piece of tape to the preset length Hold Down Shaft Increases adhesion to feed roller Reel Holder 3 core to hold material Alarm Lights when there is a malfunction in the unit SET UP With Power Switch off plug power cord into dispenser and then into wall outlet Make sure machine is grounded properly Set the Tape Length Display to 200mm Set the Auto Manual Switch to Manual Turn dispenser Power Switch on switch will be illuminated Place tape roll on Reel Holder Put Reel Holder into reel holder slots Open latched top cover and r
4. our examination and determination that alleged defects have not been caused by misuse abuse improper installation or application repair alteration accident or neglect in use storage transportation or handling The above warranty and remedy constitutes START International s sole liability hereunder and are in lieu and exclusive of all other warranties and remedies expressed implied or statutory including but not limited to those of merchantability and fitness for a particular purpose REPAIR POLICY Contact START International to determine nature of problem Furnish START with the following information 1 Who the unit was purchased from 2 Model number and serial number 3 Date purchased copy of invoice or packing slip required Start will issue an RGA Return Goods Authorization for the repair Return machine to Start International by UPS insured and prepaid Start will notify the customer if there is a repair charge A 25 00 evaluation charge will apply to all non warranty repairs and will be applied to subsequent repair charge NOTES Do not leave tape dispenser in direct sunlight Do not use in humid or dusty locations Wipe with dry cloth only Do not insert your fingers into the tape outlet Do not drop the dispenser or subject it to heavy shock FEATURES When using automatic feed remove the first piece of tape the unit will automatically feed and cut the next piece at the preset length
5. uy amp E ki e ml r I ac a n E a BJ la la O gt JO O O O irm b P gt E P P S ce ce ce c ce ce ce ce os foo fe fo a a a c e a a e n n m n n n n le le le J k un un l Jen e e sy Encoder Right Encoder Left Safety Switch 1 3 1 3 3 2 4 4 4 207 2 2 4 3 614 207 207 es START International 4270 Airborn Drive Addison TX 75001 USA Toll Free 800 259 1986 Tel 972 248 1999 Fax 972 248 1991 info startinternational com www startinternational com 10 07
6. 1 616 Feed Roller C TDAU80P317 Slide Pin Short TDAOB0P310 2422160362082 Mut TOADS Parts list Pat Sections 134 ID AOBOP 602 Tape Halder Assy DA080P603 Blade Holder Ass Reel Holder Assy DADEOPE04 DAOROPEOS Plastic Washer TDAOSOPSEDG er 7 Encoder Wheel Ass gts Right Inner Panel DAOROPEO7 2 Roller Support la Feed Gear Assy 1 Feed Gear Assy Left Inner Panel Assy Cable Fixer TDAOSOPGDS Left Inner Panel DAOBOPEOS 080 610 3 3 DADBOPS14 Damops s 3 Right Inner Panel Assy DA0S0P616 Feed Roller Gear Ass Switch Fixer Plate Motor amp Gearbox DADSOPE1E 3 Right Panel Assy Inner Plate Assy stes Froaosorez DADBOPS20 Main _ roaosoPsz1 Control PCB 3194 94 194 _ 3 94 _ 3 4 94 2 2 A rm jr jo jo m O jo O rj bib gt P E IE P pb gt Bb Bb P Bb Bb Pb P gt elo jo Ja jo S lo Jo Io fa o2 Jo lo Jo 2 fa Jo Jo lo e e eo e ce fe eo o 6 I eo eo oo em eo a o S IS S joa je e liio Sa SS je IS IS SS ia niu m n n Im m m im m pm m m m m J le Eo 45 6 i ft i i fe i ft ts fe fk ts ft ft s z PR 8 5 IZ g EB E IS IS IS S IE IR IN ie IS m em E Ba e IS 6
7. 6 TDADO80P217 TDAO080P218 TDAO080P213 TDAOS80P220 TDAOS80P221 TDADS0P234 TDAD80P236 TDAO80P237 TDAO80P242 TDAD80P243 TDAOS80P244 TDAO080P250 TDADS80P251 TDADO80P252 TDAO080P253 TDAO080P255 TDADO80P257 TOADS Parts list DADSOP2658 Front Plate Tape Guide TDADSOP2TU Right Plate TDADSOP2T2 DAOB0P273 Tape Holder Assy TDADSOP2T3 TDAOBOP258 2 FeedRollerD 2 FeedRolerE IDAosoP263 1 107 TDAOBOP265 1 Sprocket 167 Sprocket 14T Sprocket 18T Rear Panel Assy 267 EE NE Sprocket 18T Motor Spracket Sprocket 18T Roller Shaft A Right Tape Holder 266 Left Top Bracket froacsorzs 2 Pressing Tape Shaft ight Top Bracket Tonosopao 207 602 814 815 Screw Bottom Inner Plate 080 302 1234602614 som Middle Panel Assy froaosorsos Feed Encoder Wheel froaosopsos 6 Screw Cutter Frame Spring froaosorsos Nut Hat 3 Control Plate DADBP279S 2 Roller Shaft B Black Frame Roller Spring moaosoesoz 68 Blade Roller _ roaosoraoe 60 60 61 6 5 60 ion amp 2 2 2 14 14 0 3 m 3 i 1 Slide Pin Long TDADSOP303 o Lock Washer 3 romosopsi2 603 Serem Feed Chain 1 DADBS0P313 221 603 614 EB Feed Chains froaosors1a Feed Roller _ moaoeosis 1 Feed Roller B TDAOSOP316
8. emove metal Hold Down Shaft Press end of tape firmly onto metal feed roller then replace Hold Down Shaft over tape and close top cover 10 Press Tape Advance Button 11 Remove tape then press Tape Advance Button again to ensure proper feeding INNE OPERATION e After tape has been loaded and fed turn Power Switch off Set Tape Length Display to required length using the push buttons above and below the numerical display The length shown is in millimeters e Flip Auto Manual Switch to desired location AUTO When the cut piece of tape is removed from the machine the next piece is automatically fed and cut The Interval Knob will set the time delay before the next piece is dispensed Maximum delay is 25 seconds MANUAL The Tape Advance Button must be pressed each time a piece of tape is needed The tape will then be fed and cut s Turn Power Switch on Press Advance Button to begin dispensing tape Tape lengths vary depending on material Verify length of first piece SPECIFICATIONS Model Tape Width Cut length Max Core Accuracy Tape Feed Type Length Weight Outside Diameter of Cut Cutter Setting Dia P 25 to 3 15 2 to 394 9 3 Automatic Automatic Digital 21165 9 L x 6 625 W x 6 4 to 80mm 50 to 251 76 2 9 5kg 12 H 229mm L x 9999mm 168mm W x 305 H Auxiliary stand available for diameters up to 24 Dependant on material
Download Pdf Manuals
Related Search