CS2433 User Manual 8” Active Subwoofer With
Contents
1. Ss DIGITECH awe Audio 8 Active Subwoofer With Satellite Output C 2433 User Manual Subwoof placement The subwoofer should be placed facing the main listening position Connect your front speakers and your sound source to the subwoofer Turn it on and put on a piece of music which your are familiar with and set the Volume level You can now adjust the subwoofer level to the overall music level In the beginning you ll need to get up amp adjust the subwoofer volume then return to your seat to check the result Once you determine the proper subwoofer volume LEAVE IT ALONE From this point on the subwoofer volume will rise amp fall with the overall volume of the subwoofer Specifications Power output Satellite 15W x 2 RMS Bass 30W RMS THD lt 0 5 Signal to noise ratio amplifier gt 85db Input impedance 10K Ohms Input sensitivity 380mV max Input port Stereo RCA Line in Frequency response Woofer 50 150Hz variable Controllers Volume Subwoofer volume Crossover frequency On Off Speaker impedance 8 Ohms Bass driver unit 8 cone long throw Subwoofer Controls 1 Power Switch This two position switch controls the power status of the subwoofer OFF turns the subwoofer off ON turns the subwoofer ON regardless of whether a signal is present or not 2 Volume Level control This rotary control adjusts the overall volume of the subwoofer system 3 Subwoofer Level Cont2. rol This rotary control adjusts the volume of the subwoofer This is used to properly balance the subwoofer s volume with the volume of your frontspeakers 4 Subwoofer Crossover This rotary control is variable from 50 hz to 150 hz This adjusts a Low Pass filter to set the upper frequency at which the output of the Subwoofer begins to roll off The recommended setting for this control is120 hz to 150 hz 5 Speaker Level Outputs These spring loaded terminals for speaker wire will send the signal onward to your frontspeakers 6 Audio Component Input These input jacks accepts a signal from an audio unit 7 Status LED This light emitting diode shows the status of the subwoofer Red indicates that the amplifier is plugged in and the power switch is on 8 Fuse Always replace the fuse with the same type amp size listed OUTPUT R L INPUT VOLUME SUB VOL CROSSOVER O O POWER o 0o O00 MIN MAX MIN MAX 50Hz 150Hz O FUSE 1A 250V Warning To reduce the risk of fire of fire or electrical shock do not expose this appliance to water or moisturi
Download Pdf Manuals
Related Search