EMF-ITC Manual - Digital Dowsing
Contents
1. e EMF MIN MAX Pressing ENTER while this option is selected will zero out the value MIN MAX only displays when the unit is in EMF BAR mode 101Page e EMF ABOVE Select this option if you want the alarm to notify you when EMF is above a certain value Increase the value by pressing ENTER until desired value appears To decrease depress the enter button then the left arrow button The release the left arrow then the enter button the count will decrease this will take a bit of practice but it s easy once you get the hang of it e EMF BELOW Select this option if you want the alarm to notify you when EMF is below a certain value Decrease the value by pressing ENTER until desired value appears Once value hits the maximum set by the factory it will start again at 0 To decrease depress the enter button then the left arrow button The release the left arrow then the enter button the count will decrease this will take a bit of practice but it s easy once you get the hang of it e EMF ZERO In areas of normally higher EMF readings this allows you to set the EMF sensor to zero e LED SCALE This allows you to change the sensitivity on the LED lights The sensitivity will be multiplied for each light left to right by the following scale 1 1X 2 2X 3 4X 4 8X 5 16X 6 32X Increase the value by pressing ENTER until desired value appears To decrease depress the enter button then the left arrow button The release t2. ADEQUACY COMPLETENESS OR RELIABILITY OF ANY INFORMATION HOWSOEVER STORED OR TRANSMITTED WHICH MAY BE OBTAINED BY ANY PERSON OR ANY ENTITY HAVING ACCESS TO THIS SITE OR b THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE WITH RESPECT TO ANY INFORMATION WHATSOEVER INCLUDED IN THIS SITE OR THAT MAY BE ACCESSED THROUGH THIS SITE OR c THE RESULTS TO BE OBTAINED FROM USING SUCH INFORMATION USERS SHOULD ALSO NOTE THAT THE CHAPP INC AND Digital Dowsing LLC DO NOT ASSUME ANY RESPONSIBILITY FOR THE QUALITY OF PRODUCTS OR SERVICES LISTED OR DESCRIBED IN THIS MANUAL NOR DO WE ENSURE COMPATIBILITY WITH PAST CURRENT OR FUTURE VERSIONS OF SOFTWARE OR HARDWARE CHAPP INC AND DIGITAL DOWSING LLC ASSUME NO RESPONSIBILITY FOR ANY DISCREPANCIES THAT MAY HAVE BEEN TRANSMITTED WITH THE PRINTED OR ELECTRONIC VERSION OF THIS MANUAL CONTROLLER OR SOFTWARE WHILE EVERY EFFORT IS MADE TO ENSURE THE ACCURACY OF ALL INFORMATION PROVIDED IN THIS MANUAL AND THAT SOFTWARE DOES NOT CONTAIN COMPUTER VIRUSES THE USER SHOULD TAKE REASONABLE AND APPROPRIATE PRECAUTIONS TO SCAN FOR COMPUTER VIRUSES AND SHOULD ENSURE A COMPLETE AND CURRENT BACKUP OF THE APPLICABLE ITEMS OF INFORMATION CONTAINED ON THE USER S COMPUTER SYSTEM THE USER SHOULD PAY SPECIFIC ATTENTION TO SOME OF THE NEWER VIRUSES THAT HAVE BEEN WRITTEN TO AUTOMATICALLY EXECUTE WHEN AN INFECTED DOCUMENT IS LOADED INTO CERTAIN WORD PROCESSING PROGRAMS LINKS TO DIGITAL DOWSING AND CHAPP CO
3. the Paranormal Puck Though we never released the drawing mode till this device was built Operating the EMF ITC 1 The Power Switch is on the front of the EMF ITC To turn ON slide the switch left Slide it right to turn OFF 2 The EMF ITC will display its Main Function Screen The functions are listed below e EMF This mode has several options from the EMF menu you can select how you want the device to perform Once selected the EMF option will appear on the main menu To return to the Main Function screen press the ENTER button OVILUS The Ovilus will create words on the text screen one word per line Up to six words per run Since this is a silent Ovilus it will wait before continuing after it has said the chosen number of words See Ovilus Menu To return to the Main Function screen press the ENTER button e YES NO This mode will return YES NO or a dash based on EMF The idea is very simple if the EMF increases by 10 the Word YES will appear If the EMF decreases the word NO appears The Minus bar will appear whenever the value is neither above nor below the sample average The percentage can be changed in the Ovilus menu To return to the Main Function screen press the ENTER button e EMF DRAW The device will draw across the screen based on the amount of EMF present When the draw has filled up all 6 LED lines the red light on the right side of the device will illuminate You can press the down righ
4. 4 SYSTEM MENU To change press the ENTER button until desired value is displayed HZ GAIN This increases the sensitivity for the frequency counter circuit e ION GAIN This increases the Ion sensitivity ZERO Zero EMF will turn on and off the Zero EMF function e CAL SET Set in factory only PLEASE DO NOT ATTEMPT TO MAKE CHANGES IN THIS MODE LOCKED OUT IN VERSION 1 06 AND ABOVE e IMAGE This increases the sensitivity for the EMF DRAW circuit The EMF Meter section is comprised of a 3 axis accelerometer and microprocessor Sampling all three Axis continuously EMF is always display as the greatest magnitude of the three axis Choose the EMF XYZ mode to display EMF plus X Y Z and direction of field This device is designed to allow the user to customize it The LED s be set so that the scale can be either compressed or expanded EMF levels can be suppressed by using the zero function It may seem like a lot but really it s a simple system If you re having trouble or just have questions PLEASE LET US KNOW www digitaldowsing com or Email help digitaldowsing com 12 Page Quality and Service Digital Dowsing LLC has made every effort to provide a well designed and quality manufactured product Each EMF ITC has been tested for function prior to shipping This test checks inputs and functions We hope you find our products meet with your satisfaction Returns If you have read this manual and d
5. EME ITC USER MANUAL EMF ITC by DIGITAL DOWSING Powered by OVILUS TECHNOLOGY e 9 enwer F ON OFF For Entertainment Purposes Only Version 1 00 by Digital Dowsing LLC www DigitalDowsing com Copyright 2006 2013 TABLE OF CONTENTS Disclaimers ane Licensing ayapa a utc ocmeus nee spew deen cates 3 Disclaimer of Liability HTML Compatibility Endorsement or Product Use 4 About EMF ITC from the inventor rrrrrrrrsssssssssssisssrsssssssse 5 aad 6 Intended 6 Theory OF OPC FANON io cs u ee een asua 6 About this device Hardwarea Pade cet sad catan sundae EE blah dae ten Seen 7 ODE ANON aqa sana pasa SS 7 User GUAE ba sau a 8 Q ality and 10 10 Bel aaa k 10 2lPage Disclaimers and Licensing The EMF ITC is sold as an entertainment device only We make no claim to the validity of the data received by this device As the owner of this device you are re
6. M ARE PROVIDED SOLELY FOR THE CONVENIENCE OF THE USERS AND DO NOT CONSTITUTE AN ENDORSEMENT OF THOSE PARTIES OR ANY REPRESENTATION AS TO THE ACCURACY COMPLETENESS OR USEFULNESS OF THE INFORMATION SUPPLIED BY THEM CHAPP INC AND CHAPP COM ASSUME NO RESPONSIBILITY FOR ACTS ERRORS OR OMISSIONS BY OFF SITE PARTIES OR THE INFORMATION OR MATERIALS SUPPLIED BY THEM THE OWNERS OF INC CHAPP COM DIGITAL DOWSING LLC DIGITALDOWSING COM ITS AGENTS EMPLOYEES AND CONTRACTORS WILL NOT BE LIABLE TO ANY PERSON OR ENTITY HAVING ACCESS TO THIS SOFTWARE WEBSITES OR HARDWARE FOR ANY DAMAGES OF ANY KIND WHETHER DIRECT INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL OR LOST PROFITS OR DATA OR HARM TO PERSONS INCLUDING DEATH HOWSOEVER CAUSED WHETHER ARISING OUT OF NEGLIGENCE OR OTHERWISE WHICH MAY BE OCCASIONED FROM THE USE OF THIS SOFTWARE HARDWARE FIRMWARE OR WEBSITE INFORMATION OR THE POSSIBILITY HEREOF BY USING THIS CONTROLLER OR INSTALLING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS AND CONDITIONS SET OUT HEREIN AND ALL APPLICABLE LAWS AND REGULATIONS IF YOU DO NOT AGREE WITH ANY OF THESE TERMS DO NOT USE THIS PRODUCT RETURN IT FOR A FULL REFUND LESS SHIPPING COST 4 Page About The EMF ITC device from the inventor What is the EMF ITC and why do we say for entertainment use only Let s take this issue head on First and foremost the EMF ITC is designed to aid in Paranormal Research The EMF ITC uses what w
7. e call ECM or Environmental Communications Modes Some of our devices can create speech and text in this mode So what is ECM A method of taking energy levels in the environment and creating speech nothing more We make no claim as to spirit communications aliens ghosts or any other type of phenomena Devices with this mode should be considered for entertainment Why Because there s no person who can prove to a certainty what these messages are Further people need to take a rational grounded approach to any device that creates speech or text The power of suggestion is very strong For the record our devices do not use any type of random generator or sweep function No algorithm is employed to produce text or speech in a specific pattern Remember the odds of this device saying a word that is contextually correct is 1 in 2000 And in the units with phonetic speech the odds only 1 in 71 A lot of claims have been made about devices such as this Simple math will tell you the odds are much better than you think That it s just coincidence and nothing more Sincerely Digital Dowsing LLC 5 Page Safety NEVER allow children to operate this device Intended Use 1 These items are provided for adults over the age of 18 years 2 This device is not intended for unsupervised use or unattended use 3 It is for hobby or personal experimentation 4 User has read and understands the Disclaimer and the manual before at
8. e the when installing 7 Page The EMF ITC User Guide About EMF ITC We didn t want to make another EMF meter there are already hundreds out there many are VERY good We wanted to make an EMF meter that was geared for Paranormal use That s why the LED scale can be changed or you can ignore EMF below a certain level This device has 5 different select screens just to display EMF so it can be tailored to the user or the circumstances We added ITC to allow users to experiment more Simply put nothing happens on demand ITC takes time trial and error That s why we have added an Ovilus Mode to experiment with text driven purely by changes in the environment This device DOES NOT use any type of random generator The YES NO mode is an ITC approach for those that want defined actions The EMF level is sampled and a floating average is computed In this Mode a represents no response to get a YES the EMF must increase by the EMF percentage selected To say NO the EMF must decrease below the average by the same percentage creating a measured response EMF drawing mode is perhaps the strangest thing we have ever done Channels 3 and 4 are sample they are reacting to simple static electricity EMF or Ionization The Values are drawn directly to the screen as pixels Sometimes the images are simple lines or almost all dark or light other times Numbers letters figures ect We started experimenting with this in the first beta versions of
9. e this option to display EMF Bar Level and Minimum and Maximum EMF A bar will be shown depicting the current EMF level EMF is show in the upper portion Of the screen the Minimum EMF reading and the Maximum EMF reads are shown above and below the bar Display EMF XYZ Choose this option to display EMF and all the Axis of EMF data The small arrow on the lower right of the screen will point to the area of the highest detected EMF Please note this is based on polarization of the field not just magnitude All three axis will display X Y Z in the lower left of the screen while the largest magnitude of EMF will Display in the upper portion of the screen The Arrow lower right will point to the greatest magnitude based on polarity See the chart below X So the quadrants break down as follows X Y X Y X Y X Y If at anytime the magnitude of X and Y are the same an X will be displayed instead of the arrow e EMF HZ Choose this option to display EMF and Frequency EMF on the upper portion of the Screen EMF on the Lower Portion Frequency is displayed in Hz based on difference in channel 1 and 2 over time The measurement period has a maximum frequency of 10 000 Hz 2 EMF ALARM The EMF alarm may be turned on to notify you of changes in the following parameters The alarm will notify you by flashing the LEDs To turn ON the alarm press the ENTER and the right arrow button To turn OFF the alarm press the ENTER and left arrow button
10. ecided that this device does not meet your needs for any reason We only accept unused returns for a refund within 7 days of purchase E mail help digitaldowsing com in the Subject line state RMA requested Include a brief note stating that you would like to return the device We will E mail instructions for its return and refund the amount of purchase less shipping charges Need Help E mail us at help digitaldowsing com e State the nature of your problem e Please send picture or drawings if needed e Detailed information about the problem We try to respond in 24 hours or less Monday Friday 10am to 5pm 13 1Page
11. he left arrow then the enter button the count will decrease this will take a bit of practice but it s easy once you get the hang of it 3 OVILUS WORDS This option will allow you to choose the number of words that will display on the screen 05 will show the maximum of 6 words Press the ENTER button down to change number of words Once the screen has displayed the number of lines you have chosen the last red light on the right will illuminate Press the down arrow button to continue word display e OFFSET The Offset is the difference between 2 channels The device will favor one channel over the other by changing the Offset Press the ENTER button down to increase the 11 Offset Once value hits the maximum set by the factory it will start again at 0 e ROD This option allows you to increase the sensitivity of the Dowsing Rods the higher the number the greater the sensitivity Press the ENTER button down to increase the sensitivity Once value hits the maximum set by the factory it will start again at 0 e GAIN This option allows you to increase the sensitivity of the Ovilus the higher the number the greater the sensitivity Press the ENTER button down to increase the sensitivity Once value hits the maximum set by the factory it will start again at 0 e YN This option allows you to change the percentage of the YES NO function Press the ENTER button down to change the percentage from 10 to 40
12. sponsible for the device s use Further you are responsible for the safety of others who may come in contact with this device This device can generate disturbing text children under the age of 18 should not use it Further this device should not be used by anyone with a history of mental illness You agree not to expose children to this device or any person who may be harmed or damaged by exposure to this device Further you agree that you are over 18 and are in sound mental condition 3 1Page Disclaimer of Liability HTML Compatibility Endorsement or Product Use WHILE EVERY EFFORT IS MADE TO ENSURE THE TIMELINESS AND ACCURACY OF THE INFORMATION DOCUMENTS DATA MATERIAL OR SOFTWARE THE INFORMATION AVAILABLE ON Digitaldowsing com IN WRITTEN OR ELECTRONIC FORM Digital Dowsing LLC and CHAPP INC ASSUMES NO LEGAL LIABILITY OR RESPONSIBILITY FOR THE COMPLETENESS ACCURACY OR USEFULNESS OF ANY OF THE INFORMATION DISCLOSED INFORMATION INCLUDING ANY REVISIONS AND UPDATES AND MATERIALS ARE PROVIDED SOLELY FOR THE USER S INFORMATION AND IS PROVIDED STRICTLY AS IS CHAPP INC AND CHAPP COM MAKE NO REPRESENTATION OR WARRANTY EXPRESS OR IMPLIED IN RESPECT TO THE INFORMATION SOFTWARE FIRMWARE OR HARDWARE EITHER ACCESSED VIA www chapp com or www digitaldowsing com THAT MAY BE ACCESSED THROUGH THIS SITE BY WAY OF LINKS TO OTHER SITES OR RECEIVED FROM CHAPP INC OR ITS AGENTS INCLUDING AND WITHOUT LIMITATION AS TO a THE ACCURACY
13. t arrow button on the right side of the faceplate to allow the draw to continue or press the ENTER button to go to the Main Function Screen e DOWSING ROD This mode is designed to act like Dowsing rods using inputs from the internal amp 1 antennae s The Screen will display the following forms Straight NI Left V Right VU Widespread gt lt Crossed To return to the Main Function screen press the ENTER button To change functions press the up left and down right arrows on the front of the unit Press the ENTER button to select a function EMF ITC by DIGITAL DOWSING Powered by OVILUS TECHNOLOGY enwer F ON OFF For Entertainment Purposes Only Function Sub menus press the down arrow and scroll through functions to access these sub menus 1 EMF The EMF screen can be set to various types of EMF displays once select the display type will become the default on the main screen EMF ION Choose this option to display for EMF and Ion count The name EMF ION will display in the main menu ION detection is based on the difference between input channel A and Input channel B X ABS A B EMF SCOPE Choose this option to display EMF with a scope function The Scope function Reads the EMF from the greatest magnitude of X Y or Z regardless of polarization Then plots the changes in EMF as a wave form on the lower section of the Screen EMF BAR 9 Page Choos
14. tempting any use of this product or associated devices Theory of Operation Let s start with what the EMF ITC does The has 4 internal Antenna 1 Channel A Channel 2 Channel B Channel 3 Channel C or Channel 4 Channel D or Channel The Ovilus samples Channels A B amp C D returning a summed value The values create ECM modes input ECM Environmental Communications Modes The software does not interrupt user input or make decisions beyond a basic limit filter The only functional mode of this device that speech is a simple to 1 match of a level from the Channel input to a word in the dictionary list The only filters are as follows 1 Every sample an average is calculated Each new value is compared to the average If the value is within the average plus or minus the Offset the value is rejected 2 The second filter is a repeat word buffer designed to prevent the same word from being repeated So why filter The unit senses the environment If the energy levels are flat un changing the unit would simply repeat the same word over and over 6 Page About This Device Hardware Your EMF ITC is EMF ITC by DIGITAL DOWSING Powered by OVILUS TECHNOLOGY enwer F ON OFF For Entertainment Purposes Only Batteries The EMF ITC has a Battery Door on the Back of the device Slide this door open to install batteries The EMF ITC requires 3 AAA Batteries Not
Download Pdf Manuals
Related Search