Home

DVR 608 User Manual

image

Contents

1. DVR 608 Instruction Manual DVR608 consists of a highly integrated digital processor designed for home security system We advice you to read these instructions before so the installation process and operation is trouble free for you Please keep this for future reference Main Features DVR608 consists of a highly integrated digital processor designed for home security system It can support the standard NTSC PAL video as well as transmit image to JPEG MJPEG format based on the embedded high efficient JPEG engine It also supports real time video display on TV monitor Moreover it is equipped with motion detect function When there is any moving object detected the images will be recorded automatically and saved in built in flash memory or SD card inserted Package Contents 1x Digital Video Recorder DVR 1 x Connector Cable for TV Connection 1x AC DC Adapter 5VDC with 5mm plug Other Things Required Not Supplied 1 2 cameras for CCTV with extension connector cables SD memory card up to 1GB Set up the system 1 Connect the connector cables from each camera to the DVR controller CH1 or CH2 2 Insert the SD memory card into the slot Push in until it clicks Press again to remove 3 Connect the connector cable from the DVR controller TV OUT to the TV AV input 4 Plug in the mains power plug into the DVR controller S VDC and the other end to the power socket The DVR controller is automatically swi
2. Press OK to set up the area 6 4 3 2 Use LF RT key to select full middle small area 6 4 3 3 Press OK then LF RT UP DN key to move the sensing area to desired target position 6 4 3 4 Press OK to quit sensing area setup 6 4 4 Set up motion detect count press OK to select 1 3 or 5 this means the no of images will be captured at every trigger 6 4 5 Set up motion detect interval press OK to select 1 3 or 5 the bigger figure the longer interval to active the detection Setting 1 is about 3 sec between 2 snap shot 6 4 6 Set up motion detect sensitivity 6 4 6 1 Use UP DN key to select value from 1 to 99 6 4 6 2 The value of data changes in the targeted area is shown therefore one can determine what target value is good for his monitoring purpose In general speaking bigger value lower sensitivity 6 4 6 3 Press OK to confirm and quit Icon Definition Set up Menu ger Detect On or Off Select image quality Hi or Low Motion detect area setting Motion Detect count Motion detect interval o gt Motion detect setting 9 sensitivity Photo Management Format memory Delete one photo vari clear all files eo pete a
3. s will be stored in different folders for easy searching The folders are named according to the date sequence If there is no file in the memory it will show NO FILE and enter view mode 4 1 press MODE button to enter playback mode 4 2 press OK to enter thumbnail view press again OK to normal view 4 3 use LF RT button to forward or rewind the image 4 4 press UP to turn on off the OSD 4 5 press OK and hold 3 sec to show folder name use UP DN key to scroll OK to select Delete files from memory 5 1 At playback mode press Mode and hold for 3 sec to enter playback menu by using LF RT key one can select delete current image or all files in the current folder Press OK to confirm and reconfirm by selecting a tick icon 5 2 One can select format to delete all files in all folders Delete Menu System Setup At preview mode press MODE and hold for 3 sec 6 1 Set up Date time 6 1 1 Use LF RT key to select date or time and UP DN key to set the correct digit The setting will then store into system Press OK Set Up Screen to confirm 6 2 Set up auto capture enable or disable 6 2 1 Press OK to toggle enable or disable 6 3 Set up the capture format AVI or Photo 6 3 1 Press OK to toggle AVI or Photo press LF RT key to select next 6 4 Advance Setup 6 4 1 Set up the TV system Press OK to toggle NTSC or PAL 6 4 2 Setup the image quality Press OK to toggle HQ or SQ 6 4 3 Setup the motion detect sensing area 6 4 3 1
4. tched on To Camera2 To Socket OOO G To Camerat Back of DVR Controller Camera2 el To power socket DVR Controller 5 Switch on the TV and select the AV channel 6 By default the TV would show you channel 1 when power is up You can press MODE button to switch view or playback photo screen 7 You can now manually capture camera pictures by pressing OK button 8 Press MODE button to playback mode to view the recorded pictures 9 You can select the pictures by using the ARROW buttons 10 Disconnect the power supply so as to switch off the DVR controller Operation Camerat me lt dpAisV Right Side of DVR Left LF Right RT Up UP Down DN Mode OK Change mode between view and play back By default the DVR is in view mode and show channel when power up One can press MODE to switch view or playback photo screen Change viewing channel and PIP 2 1 Press LF to change view from Ch1 to Ch2 2 2 Press again LF and view PIP Ch2 in Ch1 2 3 Press again LF and view PIP Chl in Ch2 2 4 Press again LF to cycle from viewing Ch1 Capture photo 3 1 by manually at View mode press OK to snap an image 3 2 by motion detect please refer to the following setup section once it is in armed mode the DVR will capture the image when motion detected 3 3 Use short cut key UP to arm the system at View mode Playback the photo inside the memory The capture photo

Download Pdf Manuals

image

Related Search

Related Contents

PDF - BioMedSearch  アップデート・ガイド  Fiche-conseils — Longue randonnée d`hiver en skis ou en raquettes  取扱説明書 - エプソン  NON-REFILLABLE EQUIPMENT REGULATOR USER GUIDE  補修工事等における屋根・建物からの墜落防止工法及び関連器具  WMS-1+WBS-2 user manual - V1,0  USER MANUAL - Flexible Assembly  

Copyright © All rights reserved.
Failed to retrieve file