MH-110 Wash 7x10 LED moving head user manual
Contents
1. amp STARVILLES MH 110 Wash 7x10 LED moving head HI user manual 4 themann MUSIC IS OUR PASSION Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany Telephone 49 0 9546 9223 0 E mail info thomann de Internet www thomann de 06 03 2014 ID 325877 Table of contents a uu fF WN 10 Table of contents Safety instructions nissernsirsivnineseeseesseresseresseersserrsseerssesssserssssessssessesesseeessereserersserssseesssseneee 5 Features Installation Starting up Connections and operating elements unnnnesenssennssennsennssennssnnnnennssnnnnsennsennnen 16 Oper fing un ikeieikekeekehgsikkenbsibkniekaikensksigss htlelegenhfesneithe 21 6 1 Starting the device 6 2 Main menuU uersersersessesssessevsvassevsevssessenes 6 3 Functions in 9 channel DMX Mode sssescssscssseccscessseceseecsnecesseessscesseecnseessecescessneceseecsneeesseess 6 4 Functions in 14 channel DMX mode Troubleshooting Cleaning Technical specifications Plug and connection assignMent cccsscsssscssssessecsscecsseceseecssecessecsscessecssscessseesseeesneceseesses 38 MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION Table of contents 11 Protecting the environment msossvrronssrronvrrenserresserresserrenserrensersssseresseerensserenseerenserssssesssnserenseerensee 39 themann moving head MUSIC IS OUR PASSION Safety2. devices from the mains Use a lint free damp cloth for cleaning Never use solvents or alcohol for cleaning moving head 36 9 Technical specifications Number of DMX channels Illuminant Dispersion angle Maximum rotation angle pan Maximum inclination angle tilt Dimmer Operating supply voltage Power consumption Fuse Dimensions W x D x H Weight 9 or 14 channels depending on operating mode 7 four colour LEDs RGBW 10 W each 15 630 220 electronic 0 100 AC 230 V 50 Hz 100 W 5 mm x 20 mm 3 0 A 250 V fast acting 260 mm x 148 mm x 310 mm 4 5 kg MH 110 Wash 7x10 LED Technical specifications th mann MUSIC IS OUR PASSION 37 Plug and connection assignments 10 Plug and connection assignments Introduction DMX connections themann MUSIC IS OUR PASSION This chapter will help you select the right cables and plugs to connect your valuable equip ment so that a perfect light experience is guaranteed Please take our tips because especially in Sound amp Light caution is indicated Even if a plug fits into a socket the result of an incorrect connection may be a destroyed DMX controller a short circuit or just a not working light show The unit offers a 3 pin XLR socket for DMX output and a 3 pin XLR plug for DMX input Please refer to the drawing and table below for the pin assignment of a suitable XLR plug Pin Configuration 1 Ground shiel
3. instructions 1 Safety instructions Intended use Safety This device is intended to be used as moving head spotlight Use the device only as described in this user manual Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage No liability will be assumed for damages resulting from improper use This device may be used only by persons with sufficient physical sensorial and intellectual abilities and having corresponding knowledge and experience Other persons may use this device only ifthey are supervised or instructed by a person who is responsible for their safety DANGER Danger for children Ensure that plastic bags packaging etc are disposed of properly and are not within reach of babies and young children Choking hazard Ensure that children do not detach any small parts e g knobs or the like from the unit They could swallow the pieces and choke Never let children unattended use electrical devices MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION Safety instructions DANGER Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present Never remove any covers There are no user serviceable parts inside DANGER Electric shock caused by short circuit Always use proper ready made insulated mains cabling power cord with a pro tective contact plug Do not modif
4. toggles between menu items Closes an open sub menu without saving any changes DOWN Decreases the displayed value by one UP Increases the displayed value by one ENTER Selects an option of the respective operating mode Power The LED indicates that the device is connected to the power grid moving head 12 13 Connections and operating elements DMX The LED flashes when a DMX signal is received Auto The LED indicates that the automatic show is running Sound The LED lights up when the music controlled automatic show is running The briefly flashing LED indicates an incoming signal from the microphone during the music controlled automatic show MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 19 Connections and operating elements Connections 5 6 AD 18 15 POWER IN IEC chassis plug for the power supply 16 Fuse holder If the fuse blows replace it with a new fuse of the same type You must first discon nect the device from the power supply 17 POWER OUT IEC chassis socket for the power supply cable to the next unit 18 DMXIN DMX input 19 DMX OUT DMX output themann moving head MUSIC IS OUR PASSION 20 Operating 6 Operating 6 1 Starting the device CAUTION Risk of injury due to movements of the device The head of the device can move quickly pan tilt and can produce very bright light This is also valid immediately after you
5. turn on the device when the device operates in automatic mode or under remote control and when you turn off a DMX controller that is connected to the device Persons staying near the device could be injured or frightened Before you turn on the device and during the operation always ensure that nobody stays close to the device If work has to be performed in the area of move ment or in the near vicinity of the device it must remain turned off MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 21 Operating Connect the device to the power supply to start operation After a few seconds the fans start to work the head moves to the home positions for rotation pan and inclination tilt the screen displays a start message After a few more seconds the device operates in the last set mode themann moving head MUSIC IS OUR PASSION 22 Operating 6 2 Main menu Press MENU to activate the main menu Use the buttons UP or DOWN to select a submenu When the display shows the desired submenu press ENTER to open it To close the main menu press MENU or wait for 5 seconds Assoon as you activate the main menu the DMX control and a currently running automatic show are being interrupted The movable head of the unit moves to its home position If you close the main menu without making changes the unit continues to operate with the previous settings All previous settings are retained even when y
6. SSION 34 Troubleshooting Symptom Remedy The unit does not work no light Check the mains power connection and the main fuse the fan does not run No response to DMX controller 1 The LED DMX should be flashing on data transmis sion If it doesn t check the DMX connectors and cables for proper connection 2 If the LED DMX lights up without response check the address settings and DMX polarity 3 Try using another DMX controller 4 Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or inter ference to DMX interface circuits If the procedures recommended above do not succeed please contact our Service Center You can find the contact information at www thomann de MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 35 Cleaning 8 Cleaning Optical lenses Fan grids themann MUSIC IS OUR PASSION Clean the optical lenses that are accessible from the outside regularly in order to optimize the light output The frequency of cleaning depends on the operating environment wet smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device M Clean with a soft cloth using our lamp and lens cleaner item no 280122 Always dry the parts carefully The fan grids of the device must be cleaned on a regular basis to remove dust and dirt Before cleaning switch off the device and disconnect AC powered
7. TER to save the settings and close the submenu To close the submenu and the main menu without making changes press MENU or wait for 5 seconds Operating hours display Press MENU then UP or DOWN until the display shows Power On Hours Press ENTER The display shows how long the device has been already in operation To close the operating hours display press ENTER or wait for 5 seconds MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 27 Operating Temperature display Selftest Software version Default settings themann MUSIC IS OUR PASSION Press MENU then UP or DOWN until the display shows Fixture Temp Press ENTER The display alternately shows the temperature of the LEDs LED Temp and the temperature of the electronics inside the unit Main PCB To close the temperature display press ENTER or wait for 5 seconds Press MENU then UP or DOWN Juntil the display shows Auto Test Press ENTER The device now performs a selftest To close the selftest press ENTER or wait for 5 seconds Press MENU then UP or DOWN until the display shows Firmware Version Press ENTER The software version of the device will now appear on the display To close the software version display press ENTER or wait for 5 seconds With this function you can reset the device to factory default settings Press MENU then UP or DOWN until the display
8. bmenu To close the submenu and the main menu without making changes press MENU or wait for 5 seconds Press MENU then UP or DOWN until the display shows Pan Inverse Press ENTER The dis play starts to flash With the buttons UP or DOWN you can now select between No normal rotation direction and Yes inverted rotation direction Press ENTER to save the settings and close the submenu To close the submenu and the main menu without making changes press MENU or wait for 5 seconds moving head 26 Operating Tilt inversion Press MENU then UP or DOWN until the display shows Tilt Inverse Press ENTER The dis play starts to flash With the buttons UP or DOWN you can now select between No normal inclination direction and Yes inverted inclination direction When the display shows the desired value press ENTER to save the settings and close the submenu To close the submenu and the main menu without making changes press MENU or wait for 5 seconds Dimmer speed With this function you can set how the electronic dimmer operates on changing light condi tions Press MENU then UP or DOWN until the display shows Dimmer Speed Press ENTER The display starts to flash With the buttons UP or DOWN you can now select between ast fast lighting change and Smooth slow lighting changes When the display shows the desired value press EN
9. ding 2 Signal inverted DMX cold signal 3 Signal DMX hot signal moving head 38 Protecting the environment 11 Protecting the environment Disposal of the packaging mate rial For the transport and protective packaging environmentally friendly materials have been chosen that can be supplied to normal recycling Ensure that plastic bags packaging etc are properly disposed of Do not just dispose of these materials with your normal household waste but make sure that they are collected for recycling Please follow the notes and markings on the packaging Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive WEEE Do not dispose with your normal household waste Dispose of this device through an approved waste disposal firm or through your local waste facility When discarding the device comply with the rules and regulations that apply in your country If in doubt consult your local waste disposal facility MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 39 Notes themann moving head MUSIC IS OUR PASSION 40 Notes MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 41 Notes themann moving head MUSIC IS OUR PASSION 42 Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany www thomann de
10. ng conditions This device has been designed for indoor use only To prevent damage never expose the device to any liquid or moisture Avoid direct sunlight heavy dirt and strong vibrations NOTICE Power supply Before connecting the device ensure that the input voltage AC outlet matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker Failure to do so could result in damage to the device and possibly injure the user Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION Features 2 Features The moving head is particularly suitable for professional lighting tasks for example at events on rock stages in theatres and musicals or in discotheques Special features of the device 7 four colour LEDs RGBW 10 W each Control via DMX 9 or 14 channels and via buttons and display on the unit Preprogrammed automatic show programmes Sound control Master Slave mode Strobe effect Electronic dimmer Robust housing with two integrated carrying handles themann moving head MUSIC IS OUR PASSION 10 Installation 3 Installation Unpack and carefully check that there is no transportation damage before using the unit Keep the equipment packaging To fully protect the device against vibration dust and moisture duri
11. ng transportation or storage use the original packaging or your own packaging material suitable for transport or storage respectively You can install the device on the wall ceiling or floor WARNING Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country Always secure the device with a secondary safety attachment such as a Safety cable or a safety chain MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 11 Installation themann MUSIC IS OUR PASSION NOTICE Risk of overheating Always ensure sufficient ventilation The ambient temperature must always be below 40 C 104 F NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers moving head 12 Starting up 4 Starting up Establish all connections as long as the unit is switched off Use the shortest possible high quality cables for all connections MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 13 Starting up Connections in DMX mode themann MUSIC IS OUR PASSION Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device Connect the output of the first DMX device to the input of the second one and so on to form a daisy chain Al
12. nu and the main menu without making changes press MENU or wait for 5 seconds Operating mode Master or Press MENU then UP or DOWN until the display shows Slave Mode Press ENTER The dis Salve play starts to flash With the buttons UP or DOWN you can now select an operating mode E Slave The device is controlled by another device which is configured as master BE Master The Master device sets the movements and light effects which are copied by the devices configured as Slaves When the display shows the desired value press ENTER to save the settings and close the submenu To close the submenu and the main menu without making changes press MENU or wait for 5 seconds This setting is only relevant if the device is not controlled via DMX MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 25 Operating Automatic show Pan inversion themann MUSIC IS OUR PASSION Press MENU then UP or DOWN until the display shows Auto Sound Press ENTER The dis play starts to flash With the buttons UP or DOWN you can now select between Auto auto matic show and Sound sound controlled automatic show Automatic operation can only be activated when the unit is operating in stand alone mode or as master in a master slave combination This setting is only relevant if the device is not con trolled via DMX Press ENTER to save the settings and close the su
13. ou disconnect the device from the mains To restart with default values use the function System Reset Default settings on page 28 MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 23 Operating DMX address Press MENU then UP or DOWN Juntil the display shows DMX Address Press ENTER The display starts to flash Now you can set the number of the first DMX channel to be used by the device DMX address Use the buttons UP or DOWN to select a value between 1 and 512 When the display shows the desired value press ENTER to save the settings and close the submenu To close the submenu and the main menu without making changes press MENU or wait for 5 seconds Make sure that the DMX address matches the configuration of your DMX controller The fol lowing table shows the highest possible DMX address for the various DMX modes Mode Highest possible DMX address 9 channel 504 14 channel 499 themann moving head MUSIC IS OUR PASSION 24 Operating Operating mode DMX Press MENU then UP or DOWN until the display shows Control Mode Press ENTER The display starts to flash With the buttons UP or DOWN you can now choose from the fol lowing DMX operating modes 9 channel or 14 channel This setting is only relevant if the device is controlled via DMX When the display shows the desired value press ENTER to save the settings and close the submenu To close the subme
14. shows System Reset Press ENTER The device now performs a reset moving head 28 Operating Overview Control Mode MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 29 Operating 6 3 Functions in 9 channel DMX mode Channel 1 oo a wu FBP UV DN themann MUSIC IS OUR PASSION 30 Value 255 T255 255 255 255 T255 255 e ejej eje e e e T255 Strobe effect 0 19 20 255 Function Rotation pan 0 to 630 Inclination tilt 0 to 220 Speed of rotation pan and inclination tilt fast to slow Dimmer 0 to 100 Intensity Red 0 to 100 Intensity Green 0 to 100 Intensity Blue 0 to 100 Intensity White 0 to 100 Strobe effect off Strobe effect increasing speed moving head Operating 6 4 Functions in 14 channel DMX mode Channel 1 oo MM vu FB W DN O Value 0 0 0 255 T255 el le l 2 255 255 255 T255 T255 T255 255 T255 Function Rotation pan 0 to 630 Fine adjustment for rotation pan Inclination tilt 0 to 220 Fine adjustment for inclination tilt Speed of rotation pan and inclination tilt fast to slow Dimmer 0 to 100 Intensity Red 0 to 100 Intensity Green 0 to 100 Intensity Blue 0 to 100 Intensity White 0 to 100 White with full intensity and adjustable colour temperature MH 110 Wash 7x10 LED
15. th mann MUSIC IS OUR PASSION 31 Operating Channel 12 themann MUSIC IS OUR PASSION 32 Value 0 35 36 55 56 75 76 95 96 115 116 135 136 175 176 195 196 215 216 235 236 255 Constant colour 0 14 Function Blackout all LEDs off Colour temperature 3200 K Colour temperature 3400 K Colour temperature 4200 K Colour temperature 4900 K Colour temperature 5600 K Colour temperature 6500 K Colour temperature 7200 K Colour temperature 8000 K Colour temperature 8500 K Colour temperature 10000 K Blackout all LEDs off moving head Channel 13 14 Value 15 255 Strobe effect 0 19 20 255 Special functions 0 99 100 199 200 255 Operating Function One of 28 preprogrammed colours Strobe effect off Strobe effect increasing speed Without function Automatic sound controlled show Reset ifthe value is transmitted for at least five seconds MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 33 Troubleshooting 7 Troubleshooting NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers In the following we list a few common problems that may occur during operation We give you some suggestions for easy troubleshooting themann moving head MUSIC IS OUR PA
16. ways ensure that the output of the last DMX device in the daisy chain is terminated with a resistor 1100 W 2 cco n The flashing DMX LED indicates an incoming DMX signal moving head 14 Starting up Connections in master slave When you configure a group of devices in master slave mode the first unit will control the mode other units for an automatic sound activated synchronized show This function is ideal when you want to start a show immediately Connect the DMX output of the master device to the DMxX input of the first slave device Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 15 Connections and operating elements 5 Connections and operating elements 1 Spotlight head with LEDS 2 Connections themann moving head MUSIC IS OUR PASSION 16 Connections and operating elements 3 Rotatable mounting 4 Device base 5 Operating elements MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION 17 Connections and operating elements Operating elements themann MUSIC IS OUR PASSION 18 Display When the main menu is activated the display shows the current menu item and the set option When the main menu is closed it shows the current operating mode The display is dimmed a few seconds after the last keystroke MENU Activates the main menu and
17. y the mains cable or the plug Failure to do so could result in electric shock death or fire If in doubt seek advice from a regis tered electrician themann moving head MUSIC IS OUR PASSION Safety instructions WARNING Eye damage caused by high light intensity Never look directly into the light source WARNING Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy Sensitive persons should avoid looking at strobe lights MH 110 Wash 7x10 LED th mann MUSIC IS OUR PASSION Safety instructions themann MUSIC IS OUR PASSION CAUTION Risk of injury due to movements of the device The head of the device can move quickly pan tilt and can produce very bright light This is also valid immediately after you turn on the device when the device operates in automatic mode or under remote control and when you turn off a DMX controller that is connected to the device Persons staying near the device could be injured or frightened Before you turn on the device and during the operation always ensure that nobody stays close to the device If work has to be performed in the area of move ment or in the near vicinity of the device it must remain turned off NOTICE Risk of fire Do not cover the device nor any ventilation slots Do not place the device near any direct heat source Keep the device away from naked flames moving head Safety instructions NOTICE Operati
Download Pdf Manuals
Related Search