50Kb
Contents
1. D SKYE 151 700 Color Changer Set GEBRUIKSAANWIJZING USER MANUAL MODE D EMPLOI BEDIENUNGSANLEITUNG BRUGSANVISNING GB Congratulations on the purchase of this SkyTec light effect Please read this manual carefully prior to using the unit Warning Read the manual prior to using the unit Keep the manual for further reference Keep the packaging so that you can transport the unit in its original packaging in order to avoid damage The SkyTec light effect contains a modern halogen lamp of a high light intensity Do not look into the lamp This might damage seriously your eyes During use these lamps get very hot Therefore the light effect must be placed at least 50 cm away from inflammable materials such as curtains books etc Make sure that the housing cannot be touched by accident For indoor use only During installation nobody should stand beneath the mounting area Prior to the first use have the unit checked by a qualified person The unit contains voltage carrying parts DO NOT open the light effect Unplug the unit from the mains prior to repairs maintenance and replacement of the lamp Never plug or unplug the unit with wet hands Disconnect the unit from the mains prior to replacing the fuse If the plug and or mains lead are damaged they need to be repaired by a qualified technician If the unit is damaged to an extent that you can see internal parts do not plug the unit into a mains outlet R2. epairs and lamp replacement has to be carried out by a qualified technician Only connect this unit to an earthed mains outlet of 230Vac 50Hz Always unplug the unit during a thunderstorm or when it is not in use If the unit has not been used for a longer period of time condensation can occur inside the housing Please let the unit reach room temperature prior to use When you unplug the unit from the mains always pull the plug never the lead In order to prevent dropping of the unit a safety fastening needs to be installed This can be a solid chain a steel cable etc which has to be fastened separately from the mounting bracket The supplied bracket is the main fixing and must be used to solidly mount the light effect In order to avoid accidents in public premises the local legal requirements and safety regulations warnings must be fulfilled Keep out of the reach of children Installing replacing the lamps Before replacing the lamp unplug mains lead and let the lamp cool down Please follow the lamp manufacturer s notes when installing You need one 6V 30W Par 36 Lamp for installaion Please remove the fixation ring by pressing it together If replacing the lamp remove the old lamp from the pinspot and loosen the wires Loosen the screws on the new 6V 30W Par 36 lamp with an appropriate screwdriver Connect the wires with the lamp using an appropriate screwdriver Tighten the screws Insert the lamp in the housing Fix
3. r personal injuries caused by a disrespect of the safety recommendations and warnings This is also applicable to all damages in whatever form Technical specifications Pinspot Par 36 Power Supply seein antenccevs cates e aee daregecdeeeet aaaeeeaa 230V AC 50Hz Power eO SU p OTE a a aaae ata Er e A AE ae Eer SrA EEn E EEEE 30W Weight na a ei e Peevey a aaae E EAEE E E E a aa oA TAT 1kg Dimensions LXWXH ccccccecceeceeeeeeeeeeeteeeeneseedenessersceseoeeeeeaeens 150x120x115mm Fitting Lamp oeie oe int sane ae aae a aeia ea A ea eieaa n innates 6V 30W Par 36 Color wheel w Motor P w r SUPpl yz esde tead ga aE a aA E ea atin deenees 230V AC 50Hz RROLALION SPCOO EEEE E E AT TN 2 5rpm COlOrS a a aaa he e See aa Red green yellow blue Diameter euenire a aea a a pa eae 23cm
4. the lamp with the fixation ring Mounting the Color Wheel Unscrew the nut and the first tooth ring from the fixation axle of the color wheel motor Remove the foil of the color wheel Slip the color wheel onto the fixation axle of the motor Slip the tooth ring first and then the nut onto the fixation axle Fasten the nut without damaging the color wheel Fix the color wheel with motor via the fixation on the motor to the pinspot housing and tighten the screw Riggin Mount the Pinspot with the mounting bracket to your trussing system using an appropriate clamp The hole in the mounting bracket has a diameter of 10mm For overhead use always install a safety rope that can hold at least 10 times the weight of the fixture You must only use safety ropes with screw on carabines Pull the safety rope through the hole in the mounting bracket and over the trussing system Insert the end in the carabine and tighten the fixation screw Adjust the desired inclination angle via the mounting bracket and fix the bracket screws tightly Connect the fixture to the mains with the power plug Do not attempt to make any repairs yourself This would invalid your warranty Do not make any changes to the unit This would also invalid your warranty The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual SkyTronic UK cannot be held responsible fo
Download Pdf Manuals
Related Search
50Kb 50kb compress 50kb images 50kb jpg converter 50kb photo size 50kb jpg 50kb converter 50kb pdf 50kb to 100kb converter 50kb resize 50kb to mb 50kb compress jpeg 50kb to 150kb converter 50kb to 100kb converter jpg 50kb 50kb compress pdf 50kb photo resize