User Manual
Contents
1. Easy Use Touch Keypad Backlight LCD Display 1 Auto Frost Protection Holiday Mode Function Intelligent Keypad Lock 1 Monoblock Type Installation CRONOMCEG O Power On Status 1 Power On Off Status Switch Short press Op to do the Power On Off Status switch 1 Programme Manual Switch Long press G and ay together for 5 Secs to do the Programme Manual Mode switch 2 Temp Setting The ye displays when it start Short press Ap or vp to choose target temp value 3 Temp Checking a Short press ey to check the Floor Temp then the oy displays when the floor sensor connect to the thermostat b In the Manual mode short press to check Target Temp c lIn the Programme mode short press Gy to check the Event 1 programme setting information short press ay to check next Event programme setting information 5 Keypad Lock Unlock The D displays when it s actived Long press and together for 5 Secs to do the keypad lock unlock switch The keypad lock function have two level please check the Parameter Table Item P08 Power Supply AC230V 50Hz Output Load lt 3600W 16A 1 Protection Rating IP30 Housing Case Fireproof ABS Plastic Installation Type EU Flush Mounting 1 Dimension 86 H xX 86 W x 12 D mm Heat Output Yy Keypad Lock Frost Protect Holiday Mode CD Target Tem2. p Temp Hold m Room Temp Week M2s Floor Temp Power Off Status 1 Holiday Mode The Lp displays when it s actived Long press yp for 5 Secs to access the Holiday Mode Short press ey gt or VY to adjust the target value a The Holiday Mode will start at 24 00 of the day b Power Off Status access Holiday Mode Setting again Reduce Day Setting to 00 could exit the Holiday Mode 2 Temp Hold The CO displays when it s actived Long press ay for 5 Secs to access the Temp Hold Mode Short press ey Oy or VY to adjust the target value a The Min Setting is 0 5 Hour the Max Setting is 72 Hour b Power Off Status access the Temp Hold Setting again Reduce Hour Setting to 00 could exit Temp Hold Mode 3 Clock Setting Long press O for 5 Secs to access the Clock Setting Short press OF gt or O to adjust the right time 4 Programme Setting 4 or 6 Events are for option Long press ey for 5 Secs to access Programme Setting Short press Gy and OA O or O to do the setting rs sol se e eo se C amp J eol oe lso s saatna Demona funn osetvabe unt Bwana O pot communication o __ THe Unt No nthe Cental Cont Sytem paz Tempaeasue onset so orc Caira Te RoomTemp us upper somom as e mun e e fonus omna Pos Frost Protcton Temp o 10 _RoomTempLoverimt 1 ae R cee ears a en O a Parameter Setting Factory Re
3. set Power Off Status long press Gy and y together for Power Off Status Firstly long press Gy and y together for 5 Secs to access the above parameter table short press 5 Secs Secondly long press for 5 Secs to restore the Gy gt or gt to adjust the target parameter value Factory Setting WW Fix the installation board on the Do the unit wiring connection Hang up the thermostat on the Tighten the top and bottom wall and tighten the screw refer to the unit back label installation board as showing screw the installation is OK Floor Probe Information a The length is 3m and can be extended if need b The sensor head type is the NTC10KQ 25C N c The floor probe could be replaced by other brand ne probe if the type is also the NTC10KON 25C LAR Unit Packing List 280g a Thermostat 1 b User Manualx1 c Floor Probe d Fixing Screwx2 Note The CD28 11 User Manual V12 technique data maybe changed without prior nitification because the unit upgrade
Download Pdf Manuals
Related Search