Hills Video Security CCTV Android App
Contents
1. you can long press it to activate the deletion window Click Confirm button to delete the selected favorites Record amp Capture 13 Hills Video Security CCTV Android App In live view mode select a live viewing window and click the to record the video of it or click the K to capture a picture of it The videos and pictures can be viewed and managed in the Picture amp Video Management interface refer to Chapter 8 Note It is recommended not to record 4 cameras simultaneously during live view due to the performance limit of the phone PTZ Control In live view mode select a playing window and click E to activate PTZ control panel and the amp changes to de Note The PTZ control should be supported by the added device You can slide on the live view window to realize the pan left right and tilt up down movements You can also pinch two fingers together to zoom out or spread them apart to zoom in the live view Live View Demo l Icon Description Start stop the auto scan EX Zoom control Zoom Ec Zoom fm Focus control fl Focus Focus Q Iris control a Iris Iris Set and call the preset Setting a Preset Steps 1 In the PTZ control mode slide on the live view window to move the camera to the desired scene 2 Click to access the following dialog box 14 Hills Video Security CCTV Android App 1 296 Call Set gt 3 Inthe number area set the pre2. 3 1 Interfaces Introduction The software has seven main functions including Live View Remote Playback Device Management Alarm Management Picture amp Video Management Configuration and Hills Auto Config Management Live View O amp t aA R You can click to activate the main menu Description of Main Menu o Mem O O Descriptions O Live view PTZ control local recording alarm outputs control etc Play back the recorded files stored in the device Display device list add delete modify device view device information etc i Enable alarm notification manage alarm information Alarm and view the alarm linkage information aa Picture and Video Display and manage the local video files and pictures Hills Video Security CCTV Android App O Configuration Hills Auto Config Configure password protection and email feedback Check the traffic statistics and configure Wi Fi settings View software s version information help file and main features Register a Hills Auto Config account log into your Hills Auto Config and manage the devices which support the Hills Auto Config service 3 2 Password Protection With the password protection enabled only the user that has the password can access the software Task 1 Enable Password Protection Steps O 1 Click and select o to enter the Configuration interface Configuration Turn Password On Modify Password Traffic Statist
3. been configured you can select to live view by channel zero 3 The number e g 23 indicates the displaying window No 4 Ifthere is only one channel under the device the icon of the device shows as Otherwise it shows as Camera List Demo 01 Bullet Dome Mini Dome 51 NVR C Start Live View 3 3 Click Start Live View to start live view of the selected camera s Or you can click to return to the Live View interface Notes 1 Upto 16 cameras can be selected for live viewing at the same time 2 Ifthe camera is live viewed for the first time it plays the live video at sub stream if it supports sub stream otherwise it plays at main stream if not the camera plays at the stream type of the last time 12 Hills Video Security CCTV Android App LO Eh f ZZ E Favorites Configuration You can add the commonly used camera s to the favorites so that you can access the camera s conveniently Steps 1 Perform the Step 1 and Step 2 of Start Live View to select the camera s 2 Click to add the camera s to the Favorites 3 Inthe pop up dialog box enter the name for the favorites 4 Click Confirm to save the settings Note Up to 32 favorites can be added The successfully added favorites will be shown in the device list area Camera List Demo 01 Bullet Dome Mini Dome NVR CH8 Favorites Name Confirm Cancel E Start Live View 1 i x If you want to delete the favorites
4. the start time and end time in the From and To field to define the search condition Select a device node and click to list all the cameras under it Select Q radio button in the camera item to select a camera for playback Notes 1 You can slide the camera list downwards to refresh the device status 2 If you select O radio button in the device item then the first camera of the device is selected for playback 3 Only the camera with record during that period can be played back successfully Camera List From 2014 10 13 11 23 To 2014 10 16 11 23 Demo 01 O Bullet O Dome Mini Dome NVR CH8 48 Start Playback Click Start Playback to start playback 19 Hills Video Security CCTV Android App 2014 10 15 09 21 03 7 You can slide the timeline bar to adjust the playback time 2014 06 17 15 45 27 Icon Description O Capture picture of the playback window P Clip the playback video il Pause the playback w Audio control Tx Stop the playback Q Digital zoom Note You can slide the icon toolbar to show the hidden icons Stop Playback You can click to stop the playback Or you can perform the following steps to stop the playback Steps 1 Click and hold the playback window 2 Drag the window upwards and the m shows on the top of the window 3 Drag the window to the m until it changes to and then release the window 20 Hills Video Security CCTV Andr
5. Hills Video Security CCTV Android App User Manual hills com au Hills Video Security CCTV Android App Thank you for purchasing our product This manual applies to Hills Video Security CCTV Android mobile client software The contents in this manual are subject to change without notice For further information including datasheets FAQ and technical support please visit www hills com au videosecurity Hills Video Security CCTV Android App Contents Chapter LUE OCUEL Ol sacencndosconsadsacansadiscatuaaseaa sed scene aaduoudsaaasedasaaeuanduaaanaaiveae eaduacdsace aabunanacaedesacat 3 LL OW UW LGW areca cee ee ONE Sil dai cin were acid vias warned dal vas reves stead actin ONO OTE 3 die 2 SYSEO IMR CO UIFCIMCINS rons ete e etiam eh diate celui elie eh dea al ei ee uhei as A 3 ES CONVENTION emer cree aE eer eT ern eee erent rt rene ern errr er a ee 3 Chapter 2 Installing and Uninstalling the Software cccccsssscccccssseecceceeeecceeeseecceeeaeeeeeeeseuaneeeeeas 4 Z LMAStAMIA the SOLUW Al E nenni E EEEE OEEO 4 22 Unin talline tHe SOWA E ori E A AA danas 4 Chapter 3 Running the SOL WV Ak oe seats etait testcase A A E R 5 3 Llnteriaces ATO GUETIOM ai sassone N E 5 22 PISSWOr I Prote Ct OR orin e a cen a E E E E O T T EA TOO OT 6 Chapter 4 Device Management osani T A Gee 8 AT PCL a DEVICE nianna E E A a E wo rede eam sae asa a eR Rt 8 AA IIOGINVIN GS a DEVICE enr r 9 A Deleting a DEVICE irain uraa T A E TOE 10 C
6. anagement interface 2 Click Alarm Push Notification to enter the Alarm Push Notification interface Alarm Push Notificatio 3 Select a device and set the as to enable the alarm notification of the device In this way the alarm information can be pushed to your phone at the first time Note The device should be armed and support alarm notification 4 When you receive a notification it appears briefly at the top of the screen You can ignore the notification or click it to address it right away Otherwise the notification displays in the alarm information directly Alarm Information Steps 1 Click Alarm Information to enter the alarm information interface you can view the received alarm information 23 Hills Video Security CCTV Android App Alarm Information 2014 06 23 17 07 50 Demo 01 Camera 01 Face Detectior 2014 06 23 17 07 30 Demo 01 Camera 01 Audio Abnorm 2014 06 23 16 57 02 Demo 01 Camera 01 Face Detectio 2 You can select a piece of alarm information and long press it to activate the deletion window Click Delete to delete the selected alarm information 3 If you want to clear all the alarm information you can click i Notes e Up to 1000 pieces of alarm information can be displayed on the alarm information list e The alarm supported to be pushed to the software includes motion detection alarm video loss alarm video tampering alarm sensor alar
7. e Hills Auto Config service can be added The device can only be added to one Hills Auto Config account 31 Hills Video Security CCTV Android App Hills Auto Config Devices Account NVR CH8 482212851 2 The successfully added device will list on the device management interface and you can click Start Live View to view the live video of the device 3 On the Devices interface select a device and long press it to activate the deletion window Click Delete to remove the selected device from your Hills Auto Config account Account Management Click Account tab and you can manage your Hills Auto Config account Click Modify Password to change the password Set the as to enable the auto login function To log out of Hills Auto Config you can click Logout Hills Auto Config Devices Account User Name Modify Password Email Auto login 32 Hills Video Security CCTV Android App Appendix Version History 33
8. ess or domain address and the port of the device User Name Input the user name of the added device Password Input the password of the added device Camera No The number of the camera s under the device can be obtained after the device is successfully added 3 Click R to confirm the settings Notes 1 Ifthe device is successfully added the software can automatically obtain the camera information of the device Hills Video Security CCTV Android App 2 Up to 256 devices can be added 3 You can click Start Live View to live view the newly added device Please refer to Chapter 5 for detailed operation about live view Device Information Alias Register Mode P Domain Address 192 168 0 14 Port User Name Password Camera No Start Live View Click to return to the Device Management interface The successfully added new device will be displayed in the Device Management interface 4 2 Modifying a Device Steps 1 In the Device Management interface select a device and click the device item to view its parameters 2 Click K and then you can modify the parameters of the device according to actual needs Hills Video Security CCTV Android App Edit Device Alias Demo 01 Register Mode P Domain Address 192 168 0 14 Port 8000 User Name admin Password Camera No 3 Click 3 to save the modification 4 Click to return to the Device Management interface 4 3 Dele
9. hapters Live VIEW assoc a a ae ee aa 11 Chapter o RS Ces a C1 oa cen tt cess erica tested R a ented atten aatrmetaa a edad tna N 19 Chapter 7 Alarm Viana cement accsasincccussasacenecsasadvacorscdnecdnvadencanndads E sondsesasadanend veudsaaabedasane 23 Chapter 3 Picture Sc VIDEO Wana COMM nrerin e aon na dosteesaawewidan OEEO ETOO 26 Chapter 9 System COnleUraulOn aein a R 28 Chapter 10 HuUlS Auto Confie SerIveE neci a REE E EE G 30 ADDE NO oa a E N 33 VERSION IS LONY ereina ria aE O TONTE EO OEEO EO 33 Hills Video Security CCTV Android App Chapter 1 Introduction 1 1 Overview Hills Video Security HVS CCTV Android App designed for mobile phone on Android OS Version 2 3 3 or higher can be used to remotely monitor the live video from HVS NVR and network camera via wireless network play back record files locally store and manage pictures and videos manage alarm notification and information and control alarm output as well HVS CCTV Android App also provides the services for managing your Hills Auto config account and the added devices With this software installed in your phone you are able to log onto the front end device via Wi Fi 3G or 4G besides if there is no public IP available for the device it s accessible by using a dynamic domain name or by mapping ports to the public IP of router Notes 1 Wi Fi 3G or 4G access service must be supported by the phone 2 Network traffic charges may be produced duri
10. ics Wi Fi Settings Help About 2 Click Turn Password On to enter the password settings interface 3 Enter the password for protection the software and confirm it to activate the password Note The length of the password should be between 1 and 10 Next time if you want to run the software after closing the software you need to enter the password to log in first Hills Video Security CCTV Android App TurnPasswordOn B Password 1 10 characters Confirm 1 10 characters Task 2 Modify the Password Click Modify Password and enter corresponding information to modify the password Modify Password B Old 1 10 characters New 1 10 characters Confirm 1 10 characters Task 3 Disable Password Protection Steps 1 Click Turn Password Off to disable the password protection 2 Enter the password to confirm the settings Hills Video Security CCTV Android App Chapter 4 Device Management 4 1 Adding a Device You need to add a device firstly that all operations such as live view playback and device management can be accessible Steps 1 Click B and select to enter the Device Management interface Devices 2 Click to add a new device Alias Edit a name for the device as desired Register Mode Select the register mode to HiDDNS IP Domain or IP Server e P Domain You can access the device through fixed IP address or domain name You need to edit the IP addr
11. m line crossing detection alarm intrusion detection alarm face detection alarm scene change detection alarm audio exception alarm defocus detection alarm and PIR alarm Alarm Linkage Steps 1 In the alarm information interface select a piece of alarm information and click eh In the pop up message box select Live View or Remote Playback to view the live view or record file of the camera that occurs motion detection video loss video tampering line crossing intrusion face detection scene change detection audio exception defocus detection or PIR alarm Note The related record file will be played from 30s before the alarm occurs to 90s after the alarm E g if the motion detection alarm occurred at 11 30 00 then the record file is from 11 29 30 to 11 31 30 24 Hills Video Security CCTV Android App Alarm Linkage Live View Remote Playback 25 Hills Video Security CCTV Android App Chapter 8 Picture amp Video Management In Picture and Video Management interface you can view and manage the local video files and pictures that you manually record clip and capture in Live View and Remote Playback interface The pictures and video files are stored in the software s directory of the SD card You can also share the pictures and video files to other available applications For sharing pictures and videos to other applications please perform the following steps 1 Click 2 and then select the picture
12. n Register Register an Account If you do not have a Hills Auto Config account you can register one Steps Click H and select to enter the Hills Auto Config interface 2 Click Register to enter the account registration interface Enter your email account and the picture verification code Click Get Verification Code and enter the verification code received by your email Note f the picture verification code is not clear you can click Refresh to get a new one 30 Hills Video Security CCTV Android App Enter Email Email Verification Picture oT Refresh Get Verification Code 3 Configure the user name and password for your Hills Auto Config account to complete the registration Login Steps 1 Enter the user name email account or mobile phone input the password and click Login Notes You can check Auto login checkbox to remember the user name and password log into the software automatically f you forget your password click Forgot Password to verify your account and reset your password Device Management You can add the device to your Hills Auto Config account for live view playback or other management Steps 1 Click and use your phone to scan the serial No on the label of your device by aligning the QR Code with the scanning frame Or you can click and enter the serial No 9 bit of the device and click to search the device Notes Only the device that supports th
13. n by Samsung 19100 Galaxy SII CPU 15 Hills Video Security CCTV Android App dual core 1 2 GHz omon on Frame rate 25fps Bitrate 512Kbps Window Division When multiple cameras are under live view they are 4 division mode by default You can double click the live view window to display the camera in 1 division mode and double click again to restore When there are multiple pages of playing windows you can slide the screen to go to the next or previous page Live View Live View During the live view you can click Tx it changes to ES to stop live view of all cameras And you can also click E to recover the previous live view Or you can perform the following steps to stop live view of the specific camera Stop Live View 16 Hills Video Security CCTV Android App Steps 1 Click and hold the live view window 2 Drag the window upwards and the m shows on the top of the window 3 Drag the window to the m until it changes to m and then release the window Live View Live View emo 01 Rullet Fluent O amp E A RQR O amp t 42 R Alarm Output Control You can control the alarm outputs of the added device by the software Note The alarm output should be supported by the device Steps 1 Slide the icon toolbar to access the hidden icons 2 Click amp to activate the alarm output control panel 3 Select an alarm output and click it to set it as a to enable this alarm ou
14. ng the use of this client software Please refer to the local ISP 1 2 System Requirements The mobile phone should be based on Android OS version 2 3 3 or higher Note The mobile phone with resolution of 480 800 480 854 960 540 1280 720 800 1280 or 1920 1080 is supported 1 3 Conventions In order to simplify the description we define the Hills Video Security CCTV Android App as software and NVR and network camera as device in the following chapters Hills Video Security CCTV Android App Chapter 2 Installing and Uninstalling the Software 2 1 Installing the Software Steps 1 2 Log onto the Google Play Enter Hills Video Security CCTV to search the mobile client software Select the HVS CCTV oftware download and install it to your phone a After having installed the software successfully you can click to start the software 2 2 Uninstalling the Software Steps L Enter the Application Management interface of your mobile phone e g Settings gt Apps Note The path for entering the Application Management interface varies depending on the Android OS version of your phone Click the software icon In the App info interface of the software click Uninstall button and then click OK button to uninstall the software Hills Video Security CCTV Android App Chapter 3 Running the Software After having installed the software successfully click to run the software
15. oid App Remote Playback 2014 10 15 09 21 38 2014 10 15 09 21 33 O r U Q QQ r U _ 0 QR Clip amp Capture During the playback you can click YP to clip the playback video or click to capture pictures of it The clipped video and captured pictures can be viewed and managed in the Picture amp Video Management interface refer to Chapter 8 Digital Zoom You can realize the digital zoom during playback of video files Steps 1 Slide the icon toolbar to access the hidden icons 2 Click and then spread two fingers apart to zoom in or pinch them together to zoom out the video Or you can double click on the playing video to realize digital zoom Full screen Playback During playback you can rotate the phone to enter the full screen mode You can drag the toolbar to adjust its position Note Please release the rotation lock of the phone to realize this function You can touch the screen to activate the control panel after it hides 21 Hills Video Security CCTV Android App Icon Description il Pause the playback Capture picture of the playback video Clip the playback video Audio control Digital zoom 22 Hills Video Security CCTV Android App Chapter 7 Alarm Management In Alarm Management interface you can enable alarm notification manage alarm information and view the alarm linked video Alarm Notification Steps 1 Click El and select to enter the Alarm M
16. release the rotation lock of the phone to realize this function 27 Hills Video Security CCTV Android App Chapter 9 System Configuration Check Traffic Statistics The network traffic consumed during live view and remote playback can be checked You can check the mobile network traffic and Wi Fi network traffic separately Steps 1 Click B and select og to enter the Configuration interface Configuration Traffic Statistics Turn Password Off Modify Password Current Day 1 43MB Current Month 1 43MB Traffic Statistics History 1 43MB Wi Fi Settings Help Current Day About Current Month History Clear All 2 Click Traffic Statistics to enter the Traffic Statistics interface The recorded traffic data lists Mobile Network Refer to the cellular data consumed during live view and remote playback Wi Fi Refer to the Wi Fi data consumed during live view and remote playback Current Day The traffic data consumed today Current Month The traffic data consumed this month History The traffic data consumed since you started using the software 3 Optional You can click Clear All to empty the data Wi Fi Settings The software provides the function of generating the QR code of Wi Fi network The network camera can scan the QR code to connect to the Wi Fi network conveniently Steps O l oo 1 Click El and select to enter the Configuration interface 2 Click Wi Fi Settings to enter the Wi Fi Se
17. s and videos you want to share 2 Click I and select the needed application to share For deleting the pictures and videos in batch please perform the steps below 1 Click and then select the pictures and videos you want to delete 2 Click to delete the selected file s Or you can click X to cancel it Picture Management Steps 1 Click H and select a to enter the Picture amp Video Management interface 2 Click a picture and the picture displays in full screen You can click if you want to delete it and click to share it to other applications 16 10 2014 Thu 11 28 49 ins 3 You can pinch two fingers together to zoom out or spread them apart to zoom in the picture Or you can double click on the picture to realize digital zoom You can also slide to pan the picture under zoom in mode 4 Click to back to the Picture amp Video Management interface 26 Hills Video Security CCTV Android App Video Management Steps 1 Inthe Picture amp Video Management interface click a video and the video shows in full screen Click if you want to delete it and click to share it to other applications 2 Click to play it You can slide the time line bar to adjust the playback time Fo Capture a picture of the playback video Pause the playback ED Audio control 16 10 2014 Thu 11 32 26 00 00 05 00 00 07 O SD 3 You can also rotate the phone to enter the full screen mode Note Please
18. set No Note The preset No should be between 1 and 256 4 Click Set to finish the preset settings Calling a Preset For the programmed preset edit the preset No in the dialog box and click Call to call it After completion of PTZ control click XX to hide the PTZ control panel Image Quality There are three defined image quality types provided including Clear Balanced and Fluent And you can also customize the image quality Click to adjust the quality according to the performance of your network and phone hardware Note If you change the image quality the live view and recording of the device may be affected due to the new settings Balanced Fluent Custom Customize the Image Quality Steps 1 Click to activate the customized panel shown below Stream Type Sub stream Resolution CIF 352 288 Frame Rate Bitrate Confirm Ji Cancel 2 Configure the parameters according to actual needs including Stream Type Resolution Frame Rate and Bitrate 3 Click Confirm to save the settings Note The live view effect is related to the performance of your network and phone hardware If the live view is not fluent or the screen appears blurred please reduce the resolution frame rate and bitrate of the camera in Custom mode or set the image quality as Balanced or Fluent mode The following table shows the recommended frame rate and bitrate configuration for different resolution at H 264 video compressio
19. ting a Device In the Device Management interface select a device and long press it to activate the deletion window Click Confirm button to delete the selected device Hint Confirm to delete Confirm Cancel 10 Hills Video Security CCTV Android App Chapter 5 Live View After the device is successfully added you can view live video from the devices control the alarm output of the device and manage PTZ control as well Note The alarm output and PTZ control should be supported by the added device ICON toolbar e e a Description Go to the Camera List interface Capture picture of the selected live view window Record the video of the selected live view window PTZ control panel Image quality panel Stop all the live view Audio control Two way audio Alarm output control panel Digital zoom Note You can slide the icon toolbar to show the hidden icons Start Live View Steps 1 Click H to display the added camera list Click a device node to list all the cameras under it 11 Hills Video Security CCTV Android App Note The name of the camera under the device is obtained from the device 2 Check checkbox in the device item to select all the cameras under it or check checkbox in the camera item to select the specific camera as desired Notes 1 Youcan slide the camera list downwards to refresh the device status 2 Ifthe channel zero is supported by the device and it has
20. tput You can also click the enabled alarm output BB ito set it as BB to disable it Digital Zoom You can realize the digital zoom during live view Steps 1 Click to select a playing window 2 Slide the icon toolbar to access the hidden icons 3 Click and the selected window will be display in 1 division mode 4 Spread two fingers apart to zoom in or pinch them together to zoom out the live view Or you can double click on the live view image to realize digital zoom Hills Video Security CCTV Android App Full screen Live View During live view you can rotate the phone to enter the full screen mode You can drag the toolbar to adjust its position Note Please release the rotation lock of the phone to realize this function You can touch the screen to activate the control panel after it hides gt i PF gt ta vA Wi OR Ai AE a MA a 4 O Cee Co 7 Demo South Cross Clear Description Capture picture of the selected live view window Record the video of the selected live view window PTZ control panel Image quality panel Stop all the live view Audio control Two way audio Alarm output control panel Digital zoom ASO Wil 18 Hills Video Security CCTV Android App Chapter 6 Remote Playback You can search the recorded video files stored in the added device for playback Start Playback Steps 1 2 3 6 Click H to display the added device list Set
21. ttings interface 28 Hills Video Security CCTV Android App Wi Fi Settings Wi Fi QR Code Wi Fi List Wi Fi Name Password WPA Generat WPA2 e 3 Enter the Wi Fi Name known as SSID and password of the Wi Fi network select the encryption type which should be the same as the settings of the router and click Generate to generate a QR code for the Wi Fi network Note If you select no password as the encryption type the password for the Wi Fi is not required 4 The network camera can connect to this network by scanning the QR code Notes This function should be supported by the network camera For detailed operation of the camera please refer to the User Manual of the network camera 5 Optional Click Save to save the Wi Fi network and you can check it in the Wi Fi List interface New Features and Help In the About interface click New Features to view the main features of the software In the Configuration interface click Help and you can enter the Help interface You can view the help of the software Feedback If there is any problem or suggestion when you use the software please feel free to send emails to us by clicking Feedback in About interface Our technical engineers will handle your problems and suggestions as soon as possible 29 Hills Video Security CCTV Android App Chapter 10 Hills Auto Config Hills Auto Config Jser Name Email Password g Auto login Forgot Password Logi
Download Pdf Manuals
Related Search