Getting your Ucam247 recording to a NAS drive
Contents
1. UCamelyY I PLUG amp VIEW WIFI CAMERAS CO Getting your Ucam247 recording to a NAS drive Please follow the 3 steps below 1 Things you need to do on the NAS side before you set up your camera to record to it Ensure that your NAS drive is compatible with the CIFS or SMB protocol most are but best to check first anyway refer to the user manual for your NAS box Locate and make a note of your IP address of your NAS box this can be found within your NAS settings or by using the Search program that came with the drive Should be in the form something like 192 168 x x or 10 x x x Create a folder in the root of your NAS drive for where you want the video to be saved to e g camvideo The camera only saves to folders one directory deep from the root of the NAS drive e g 192 168 1 3 camvideo so don t create a directory like mytiles downloads camera video We recommend you now create a new user login in your NAS drive settings When creating the user give it access to the directory you have just created and make sure it has Read and Write access to it If your NAS drive doesn t allow you to create new users or you don t want to just remember your admin username and password If you are unsure about any of the above please refer to your NAS drive s manual or the manufacturer s technical support 2 Entering the NAS settings into your camera er ca UCam2U 1 Live View Wizard System Support t Came2. otion detection Now set whatever you want as the parameters for this or leave as default if you just want to try things out You can always come back and fine tune these later Record to Storage on Alarm Record from Primary stream Record duration 20 seconds 5 86400 Split duration 10 seconds 10 600 Record thumbnail Enable Disable Record file name MA Suffix of file name Sequence number Date time Date time amp record time length NB Always click APPLY after making any changes you want to Save Now providing everything is set up correctly your camera will record to your NAS drive whenever motion is detected
3. ra Storage Setup F Network Storage Enable Disable en Store to NAS SD card Storage Setup Browse Storage NAS remote path Format SD Card Authorization o User name t Tools Password Re type password Store directory IPCAMERA Max Space Unlimited Max files 20000 Apply Storage Select Select whether you want to record on NAS or microSD card NAS remote path Enter the path that you wish to save the files to on your NAS Drive Remember the camera only accepts one level directory e g 192 168 1 3 camvideo as opposed to 192 cam abc Authorization1 Select whether authentication is required by the NAS Drive User name amp Password Type the user name and password of the NAS Drive This field is required if your NAS Drive requires authentication To complete click APPLY to confirm and Save your settings 3 Now create a task in Task Task Management to set the camera to record to your NAS based on Alarm or Continuously Task Management a E Aways Emai alarm sending 2 E Aways Email periodic sending 3 E Awas FTE alarm sending 4 E Aways FTF periodic sending e m Aways gt TTP periodic sending 7 m Aways snapshot to storage on alam Send files in storage to FTP server Select the task you want to set and then access it e g click on the Record to storage on alarm link if you want to get the camera to record to your NAS drive based on m
Download Pdf Manuals
Related Search