Instruction Manual
Contents
1. Do not dispose of any batteries in fire 3 LIGHT ACTIVATION Partially depress the tailcap push button switch for momentary activation For constant light fully depress the tailcap push button switch to the click on position Turn off when changing the batteries Aim the flashlight towards the surface to be inspected and then turn on the beam Wear the UV filter glasses provided to improve the contrast of defects in the fluorescent coating elcometer 4 MAINTENANCE Periodically clean the flashlight and lens with a thin soft clean cloth slightly moistened with ordinary window cleaner Clean and lubricate threads with a clean cloth and apply a thin coat of silicon based lubricant to rubber o ring seals Note Do not used petroleum based lubricant on o ring seals and threads The Elcometer 260 UV Pinhole Flashlight does not contain any user serviceable components In the unlikely event of a fault the gauge should be returned to your local Elcometer supplier or directly to Elcometer The warranty will be invalidated if the instrument has been opened Caution The Elcometer 260 UV Pinhole Flashlight is a high output lighting device and should not be left unattended For storage or transport remove batteries or unscrew tailcap until flashlight is disabled and cannot be accidentally activated The flashlight emits very intense purple light Do not look directly into the beam of this or any A N other high intensity flashlight and avoid s2. ee eee Calle 5 5 Technical specification 0 c cece eee eee eee eee eee 6 6 Spares and accessories 022 tccncsidee sew ease E wae O E EAN EEA 6 hank you for your purchase of this Elcometer 260 Inspection Fluorescent UV Pinhole Flashlight Welcome to Elcometer Elcometer are world leaders in the design manufacture and supply of inspection equipment for concrete and coatings Our coatings products cover all aspects of coating inspection from development through application to post application inspection Our concrete products include a comprehensive range of concrete utilities and civil engineering inspection equipment The Elcometer 260 UV Pinhole Flashlight is a world beating product With the purchase of this product you now have access to the worldwide service and support network of Elcometer For more information visit our website at www elcometer com elcometer 1 ABOUT YOUR FLASHLIGHT The Elcometer 260 UV Pinhole Flashlight is fitted with a one watt maximum purple Class 1 LED module Its beam has a wavelength of 405nm 5nm which the human eye perceives as a purple light Powered either by either two disposable CR123A lithium batteries or a type 18650 rechargeable lithium ion battery the Elcometer 260 UV Pinhole Flashlight has a battery life of approximately 6 hours Elcometer 260 UV Pinhole Flashlight incorporates digital current regulation circuitry to match the LED s current requirements to the batteries o
3. use 123A lithium batteries 2 x CR123A lithium batteries are supplied in the kit To fit or replace the batteries 1 Unscrew the tailcap and insert new batteries with positive ends facing towards the LED assembly 2 Replace tailcap and hand tighten 3 Depress tailcap push button switch to test If batteries are inserted with positive ends facing towards the tailcap the unit will not light Damage will not occur Re insert batteries with positive ends facing towards the LED assembly elcometer Lithium batteries can explode or cause burns if disassembled shorted recharged or exposed to AN water fire or high temperatures Do not place loose batteries in a pocket purse or other container containing metal objects mix with used or other battery types or store with hazardous or combustible materials Store in a cool dry ventilated area Disposal of batteries by fire mutilation or disassembly may result in toxic chemical release and or explosion Do not attempt to recharge disposable lithium batteries Do not leave lithium ion rechargeable batteries unattended during recharging Do not use an unprotected lithium ion rechargeable battery Do not recharge lithium ion batteries in any chargers other than those designed for the specific battery types being used Note Lithium batteries must be disposed of carefully to avoid environmental contamination Please consult your local Environmental Authority for information on disposal in your region
4. Elcometer 260 UV Pinhole Flashlight Operating Instructions elcometer a The product is Class B Group 1 ISM equipment according to CISPR 11 Group 1 ISM product A product in which there is intentionally generated and or used conductively coupled radio frequency energy which is necessary for the internal functioning of the equipment itself Class B product is suitable for use in domestic establishments and in establishments directly connected to a low voltage power supply network which supplies buildings used for domestic purposes elcometer is a registered trademark of Elcometer Limited Copyright Elcometer Limited 2011 All other trademarks acknowledged All rights reserved No part of this document may be reproduced transmitted transcribed stored ina retrieval system or otherwise or translated into any language in any form or by any means electronic mechanical magnetic optical manual or otherwise without the prior written permission of Elcometer Limited A copy of this Instruction Manual is available for download on our Website via www elcometer com TMA 0492 Issue 01 Text with Cover 22567 elcometer CONTENTS Section Page 1 About your Flashlight 0 00 eee eee e ieai tada iiS 2 2 Fitting the batteries iii cccaciecs eee ied tar ni ea eee eee Law tae eee Ewen 3 3 Light activation sesi ieidee ae ee te See ee a ee ee eee ea ees eee See ee 4 4 Maintenance s osscciccercri erid en rei Pak Hee Aa EEE
5. trongly reflected exposure elcometer 5 TECHNICAL SPECIFICATION Lens Type Dual Element Diffuser Power Output 1 watt Dimensions 150mm x 38mm 6 x 1 5 Weight 6 10z 175 grams Beam Wavelength 405nm 5nm Flashlight Casing Hard anodised aluminium Battery Life 6 hours Battery Type 2 x CR123A Lithium 3 0V 1300 1500mAH or Optional Rechargeable 1 x 18650 Lithium lon 3 7Vm 2000 3000mAH 6 SPARES AND ACCESSORIES The following replacement and optional items are available from your local Elcometer supplier or direct from Elcometer Description Sales Part No UV Protective Glasses T26020140 Lithium Battery x2 726020141
6. utput in order to achieve a consistent level of light output for the useable life of the batteries The Elcometer 260 UV Pinhole Flashlight features a click on click off switch and a lock out tailcap to prevent the flashlight being switched on in transit Safety Warning The Light Emitting Diode LED used in this product emits Class 1 LED radiation Do not look directly into the beam shine the beam into another person s eye or stare into the beam at close range as this could result in eye damage Do not expose bare unprotected skin to the beam When using the Elcometer 260 be aware of mirrors and or reflective surfaces as the beam can reflect back to the user or others nearby Use this product only for its intended purpose in a safe responsible manner elcometer 1 1 WHAT THE BOX CONTAINS Elcometer 260 UV Pinhole Flashlight e Wrist Strap e 2x CR123A Lithium batteries e UV Protective Glasses A nylon mesh belt holster Operating instructions The product is packed in a cardboard and foam package Please ensure that this packaging is disposed of in an environmentally sensitive manner Consult your local Environmental Authority for further guidance To maximise the benefits of your new Elcometer 260 UV Pinhole Flashlight please take some time to read these Operating Instructions Do not hesitate to contact Elcometer or your Elcometer supplier if you have any questions 2 FITTING THE BATTERIES For optimum performance
Download Pdf Manuals
Related Search