U s e r M a n u a l
Contents
1. 1 3 Inserting a Memory Card 1 3 1 About Memory Cards This X500 bundle comes with a Thinkware UHS 32GB MicroSD card gt UHS MicroSD card must be used with a storage capacity of 16 32 or 64GB A minimum of 16GB is strongly recommended for Full HD recording The MicroSD card should be formatted every 2 weeks to maximize the lifetime of the memory card 1 3 2 Installing a MicroSD Card Open the slot cover and insert the MicroSD card into the slot with the metal contact facing the front side of the unit and push until the memory card locks into place de Inserting the memory card we gt Removing the memory card Press the end of the MicroSD card until it clicks out from the slot Pull out the MicroSD card and close the slot cover MicroSD card gt Device only supports MicroSDUHS I card with capacity of 16GB or higher Do not apply excessive force on the MicroSD card or attempt to insert it in the wrong direction as it may cause damage to the memory card Cautions O The MicroSD card is a consumable item and should be replaced periodically O THINKWARE is NOT responsible for any issues and or damages that may occur from not using genuine or authorized parts and accessories It is strongly recommended that only THINKWARE memory cards are used to minimize card error O Ensure that the device is completely off before removing the memory card to avoid loss of data OTo prevent loss2. reddot award 2015 winner THINKWARE DASH CAM X500 User Manual RoHS This Dashboard Camera dash cam is a specialized onboard device that continuously records video while the vehicle is in use Some features may not be available depending on installation driving conditions and vehicle type The video quality might vary for each device as a result of installed firmware The device DOES NOT guarantee video recording of all accidents as built in impact sensor may not be activated due to combina tion of user settings and the level of impact during the collision Before Using THINKWARE DASH CAM X500 FCC Statement Caution 01 Getting Started 1 1 In the Package 1 2 Product Overview 1 3 Inserting a Memory Card 1 4 Vehicle Installation Basic Operations 02 2 1 Turning the Device Power On Off 2 2 Road Safety Warning 2 3 Recorded Files 2 4 Recording Videos While Driving 2 5 Recording Videos While Parked 2 6 Manual Recording 2 7 Formatting MicroSD Card 2 8 Upgrading Firmware 03 LCD Screen 3 1 Main Menu 3 2 Live View 3 3 File List 3 4 Memory Card Settings 3 5 Dual Save Videos 3 6 Settings gt Camera Settings 3 7 Settings gt Record settings 3 8 Settings gt Road Safety settings 3 9 Settings gt System Settings 3 10 About Device 04 PC Viewer Software 4 1 Thinkware Dash Cam PC Viewer 05 Device Information 5 1 Specifications W N N OY Ul N 12 1
3. A A installed Double click the application icon once PC Viewer T nee installation completes and the application main screen will then appear Cautions O System requirements eo Windows XP 32 bit Windows 7 32 64 bit Windows 8 x 32 64 bit 1 Move the file named Dashcam Viewer zip stored in the MicroSD card to the desktop Right click on the mouse and select Open With gt Archive Utility to launch the Thinkware Dash Cam viewer application Dash Open With Viewer Move to Trash i Get Info Burn Dashcam Viewer_140413 zip to Disc Duplicate Make Alias Quick Look Dashcam Viewer_140413 zip Share Copy Dashcam Viewer_140413 zip Clean Up Selection Show View Options Tags 0000090 Cautions O System requirements MAC OS X 10 8 Mountain Lion or later OS X 10 9 Mavericks OS X 10 10 Yosemite 34 4 1 3 Select the Device Drive for X500 Click File W from menu and select the drive for the portable storage drive for the connected MicroSD card Select any file from the list to load entire video play list in the memory card Cautions OThe MicroSD card will not be recognized by the software until it has been initialized in the dash cam O It is recommended that the user record at least one video clip on the MicroSD card with the dash cam unit before accessing the Thinkware Dash Cam PC Viewer 35 4 1 4 Thinkw
4. gt lt 2nd stage FCWS warning when fast approaching the vehicle ahead after initial warning was given gt 1 Enable the FCWS feature in LCD Menu gt Settings gt Road Safety Settings gt FCWS Configure the FCWS setting in LCD Menu gt Settings gt Road Safety Settings gt FCWS sensitivity 14 gt Front Vehicle Departure Warning FVDW Front vehicle departure warning alerts the driver when the vehicle ahead starts to move forward from a complete stop L The vehicle must be at a complete stop for more than 4 seconds in order for the FVDW notification to be activated 1 Enable the FVDW feature in LCD Menu gt Settings gt Road Safety Settings gt FVDW Cautions O Driving at night tunnels heavy rain snow road surface conditions can affect accuracy of ADAS features 15 2 3 Recorded Files gt Recorded video files are saved in the folder by date and hour in the MicroSD card L Files are created based on the time when the videos are recorded REC 2014 04 01 23 3 14 Fe Year Month Day Hour Second Front view Ben evt_rec Minute recording y manual rec de motion_rec REC 014 04 01 23 3 7 14 R REC 2014 04 01 23 37 14 FMP4 Rear view recording L As a loop recording surveillance product the dash cam will automatically overwrite oldest file in the memory card once the memory is full However event recording and manual recording videos are stored in separate locations and will be p
5. 3 16 17 19 20 21 21 22 23 24 26 27 28 29 30 31 32 33 38 Before Using THINKWARE DASH CAM X500 gt Under the copyright laws this manual may not be copied in whole or in part without the written consent of THINKWARE gt Every effort has been made to ensure this Guide s accuracy However we cannot guarantee the accuracy of the contents in this document as there may be technical errors omissions and or future changes gt THINKWARE reserves the right to change or modify the product and the content of this manual at any time without prior notice for product improvements gt Images contained in this user guide are illustrations for instructional purposes only and may differ from the actual product gt Users do not reserve the right to use the product for purposes other than as specified in this user guide According to the Personal Information Protection Act and other related regulations the user owner may be held liable if the video and or conversation recorded by the device are distributed without their con sent Thus special attention should be paid in using this product O The MicroSD memory card should be tested for errors on a regular basis and as the memory card is a consumable item it will need to be replaced periodically O THINKWARE shall NOT be responsible for any problems and or damages that may occur from the use of disingenuous modified or unauthorized parts and accessories The devic
6. are Dash Cam Viewer Overview Full screen Dash cam setting Information Switch between front rear view PC Viewer File open y Front x amp Rear view Enabled only if Mi sul Map Satelite CroSD card contains a video captured Viewing screen za using rear view A o ame camera E Map i pule ny IAS E E ch k th ti peg ecks the location Playback fo ce n rv of the recorded Progress video Enabled only if video is captured while connected using GPS antenna optional in some models and must E A TOS also be connected eli to the Internet Current play time Total play time Driving speed x 000 km h Playlist Impact sensor value I lt Play Previous Plays the previous file before the current file ms fe te crete pino poed sec D Il Play Pause Playstherecordedfile temporarily pauses playback E Stop Stops the file being played The playback status resets to the starting point of the video p gt Fastforwardby1OSe selected it continues to fast forward by 10 seconds DI Play Next Plays the next file after the current file ia AutoPlay Automatically loops the video back to beginning once the end has reached Do Zoom _ Sets the video expansion ratio 0 5x 1 0x 1 5x 20x 00 es ScreenSetting Sets brightness speed ofthe video SS Lo Sae Savesthevideoinplay iie dE Volume Setsthe volume ofthe playback 36 4 1 5 View Video Playlist Select appr
7. ated before use 2 Auto Calibration will initiate when driving on a straight road at a speed greater than 30km h 18mph for more than 1 minute ADAS settings Align green line with the front edge of the hood Alien green line with the front edge of the hood E SSHSHSHHSSHSHSHSHSSHSHSHSHHSHSHSHSSHSHSHSHSHSHHSSHSHSHSHSHSHSHSHHSSHSHHSHSHHHSHSHSSHSHSHSHSHSHHSHSSHSHSHSHHHSHHSHSHSSHSHSHHSHHSHSHSHSHSSHSHHSHHSHSHSSHSHSHSHSHSHSHSHSHSHSHSHSHSHHHSHSHSHSHSHSHSHSHSHSHSHSHSHSHSHHSHSHSHSHSSHSHSSHSHHSHSSHSSEHSHSHSHSHSHSSSHHSHEHSHSEEEE gt Lane Departure Warning System LDWS Lane departure warning alerts the driver when the vehicle moves Continuous 48 MI out of its lane LDWS is activated only when the vehicle is moving de e faster than 50km h 30mph Default setting 80km h approx 50mph i es q UL 11 1 Enable the LDWS feature in LCD Menu gt Settings gt Road Safe D ii ty Settings gt LDWS E 2 Configure the LDWS settings in LCD Menu gt Settings gt Road Safety Settings gt Left Right LDWS sensitivity 120 kwh 15 5V 2012 12 25 ami0 30 Forward Collision Warning System FCWS Forward collision warning alerts the driver when the vehicle is approaching the vehicle ahead at a high closing rate FCWS is activated only when the vehicle is moving faster than 30km h 18mph Continuous amp Am Pe _ Y x _ de Watch Out 20191225 ami0 30 lt 1st stage initial FCWS warning
8. below 4 Adjust the camera so that the dash cam is facing forward and is level with the road After installation turn on the dash cam and use the live view on the LCD screen to adjust the camera angle Use a flathead screwdriver or a coin to tighten the mount after the viewing angle has been adjusted E When using a car charger Recommended locations for attaching adhesive wires clips to arrange the power cable are illustrated in the diagram it in the space between the vehicle ceiling and headliner at the top of the windshield For more information on the power cable routing instruction please visit Thinkware homepage www thinkware com Preventing Vehicle Battery Discharge E Depending on the make and model of your car the power may be supplied to the dash cam even with the ignition turned off This may result in vehicle battery discharge E Some vehicles with multiple power sockets might be equipped with at least 1 outlet that does not shut off the power with the ignition Test each power outlet to ensure you connect to an outlet that shuts off with vehicle ignition E When using a Hardwiring Cable Ligando os cabos da c mera direto na energia da bateria do ve culo habilita a fun o modo estacionamento que funciona para registrar incidentes enquanto a igni o est desligada Cuidado Tenha certeza que a igni o esteja desligada durante a instala o do produto 1 Conecte a ponta do adapta
9. ct is 10 C to 60 C 14 F to 140 F and storage temperature is 20 C to 70 C 4 F to 158 F En sure that the device is kept within these tempera ture ranges otherwise the device may not func tion as designed and at extreme temperatures permanent physical damage can result which is not covered by warranty Avoid placing the device under direct sunlight Avoid using the device in extreme conditions where the Product is exposed to high tempera ture and or humidity 4 Only use genuine accessories and peripherals from THINKWARE or authorized THINKWARE deal er THINKWARE does not warrant the safety and compatibility from use of peripherals from other manufacturers Use genuine parts supplied by THINKWARE Do not apply excessive force when pushing the buttons on the device Do not clean the Product using chemical cleaner or solvents as it may damage plastic components Use soft clean dry fabric to gently wipe the Prod uct 4 Do not place or store the device where it can be accessible by children and pets 4 Do not disassemble the Product as it will void product warranty and may also damage the prod uct Handle with care Drop shock and mishandling the Product may result in malfunction and or damage to the device 4 Do not operate this device while driving lt gt Install this device in a location where it has unob structed view of the road but does not interfere with the driver s view Check with your l
10. dor a porta de entrada de energia DC IN e conecte a outra ponta a caixa de fus veis do ve culo conforme as instru es abaixo Conforme a marca e modelo do ve culo a localiza o e a apar ncia da caixa de fus veis pode variar Confi ra seu manual do propriet rio Refira ao diagrama da caixa de fus veis normalmente encontrada no manual do propriet rio para localizar e conectar aos terminais B ACC GND gt B Energia constante Conecte ao fus vel que utilizado para as luzes de freio luzes de emerg ncia ou luz interna ACC Energia fornecida somente quando o ve culo ligado Conecte ao fus vel que utilizado para o udio gt GND Fio terra Conecte o cabo preto ao conector do fio terra normalmente encontrado perto dos fusiveis sendo um objeto met lico A Ia Observa o O Dependendo da marca ou do modelo do ve culo a localiza o do fus vel conector pode variar Verificar manual do propriet rio 2 Organize os cabos de energia do local da instala o da c mera de instala o descendo at o painel da caixa de fus veis Observa o O Organize os cabos para que os mesmos n o interfiram com os airbags do ve culo Ap s conectar o cabo de energia constante ligue o ve culo e inicie sua camera Uma vez que a
11. e and the recorded videos are intended for personal use and the recorded videos should be used for reference only The device does NOT guarantee video recording of all accidents as built in impact sensor may not be activated due to combination of user settings and the level of impact during the collision DTT FCC Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful inter ference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures gt Reorient or relocate the receiving antenna gt Increase the separatio
12. era t 2 19 Megapixel 1 2 9 CMOS Same for rear camera Viewing angle Approximately 140 diagonally Same for rear camera Video o Same for rear camera 1920 x 1080 H 264 extension MP4 Frame rate 1 channel Front view up to 30 fps Same for rear camera Audio PCM Pulse code modulation Acceleration sensor 3 axis acceleration sensor 3D 3G Adjustable impact sensitivity 5 levels __ Rear camera Support V IN port GPS Embedded GPS Input power source DC 12 24V Rear view camera DC 3 3V HENTAI mm ecra ve PRP O ie i i ee ee ee O iena nizza beetle enni lele tile ee ee ee pe Se E E ee Se nea zena tedesche ee er ce Se ecc O ee eee LCD off E Auxiliary power unit Super Capacitor _ Wamningsound Embeddedspeaker Voice buzzersound guidance Operation Storage 10 C to 60 C 20 C to 70 C Temperature 14 F to 140 F 4 F to 158 F ee AT E EEN wie a mim m ee mio ie ene i oe eee ee ei e a Connection Interface 1 x V IN port Micro USB 38
13. hicle speed 31 3 10 About Device gt About Device ja Functions h O Device Info GPS Info Y gt Functions Help for device features gt Device Info Information on device and firmware L Factory Reset Restores to factory setting gt GPS Info View GPS information L GPS Initialization Reset GPS 32 4 PC Viewer Software 4 1 Thinkware Dash Cam PC Viewer Thinkware Dash Cam Viewer for Windows MacOSis provided which can be used to watch videos recorded with the dash cam The video files recorded by the dash cam are in one minute segments and the PC viewer allows the user to watch these segments as a single continuous video The setup file for the Thinkware Dash Cam PC Viewer is included in the MicroSD card within the package Please check THINKWARE homepage www thinkware com for the latest Dash Cam PC Viewer application 4 1 1 Thinkware Dash Cam PC Viewer Software 1 Insert the MicroSD card into the USB MicroSD card reader included in the package with front side facing up as shown in the illustration 2 Connect the USB MicroSD card reader to the PC Ensure that the USB card reader is correctly oriented when inserting it into the USB drive 33 4 1 2 Installing Thinkware Dash Cam Viewer 1 Double click the Thinkware Dash Cam Viewer setup file saved in the MicroSD card to initiate program installation DASHCAM PC VIEWER is successfully
14. ideo recording using internal memory in case of an accident that causes damage to the MicroSD memory card L In addition to saving incident video files to MicroSD card at the time of the accident Dual save stores an other backup copy onto the built in internal memory in case there has been a damage to either the main unit or the MicroSD card that might result in failure to save incident videos on the external memory L When Dual Save is activated it will immediately store the previous 4 seconds prior to impact and start recording video for next 2 seconds for total of 6 second video clip L View Dual Save Video Files Video recorded and stored on the internal backup memory through Dual Save technology can be o Dual Save Videos viewed in the list located at Dual Save Videos gt Videos v deos x FS Copy to SD Copy Delete All Delete L Copy Dual Save Video Files Video recorded and stored on the internal backup memory through Dual Save technology can be gt Dual Save Videos E copied to MicroSD card using copy menu located at a copytoso com Dual Save Videos gt Copy to SD Ensure that a MicroSD card is present in the device gt Copy to SD Copy Delete All Delete Cautions O Dual Save technology saves duplicate copy of the recorded video as secure backup to the internal memo ry so the internal memory life soan may be affected by G sensor user setting road conditions and driving behavior which directly impact the freque
15. iew Camera Hardwiring Cable connection cable adapter consumable Sa i i ee ee a a a a e a ninni USB MicroSD card Quick Start Guide Warranty reader User Manual stored in the MicroSD card 1 2 Product Overview A iii ii i vini A os eee os eee eons eee on eee ee eon eee eens enon eee soon sense eee eee eens econ 2 gt Z2r22s BI AA HR OE AE IENE AIA E ORA IAA IONE OR ETIENNE RIO IO CATACH AA Nn Annn Ann Annn ac PP Ri ee en en nn EER E II I O ee ee eee ene ee eee en TEIT A e EN Inn APP aaa ca ee nn ee nn ee en eee een see O PO O eens ese e eens A AAA O E MACAW RCRA RCAC ATA RACAL MACARRON AIA IO E ATARI ACA AACA Aann Annaan A A a PR ie A nn A A rr rr O annann __________ _ _ 02 2 o22 eeieeii eee eee he IT iii i A I ivi AA A E Ann Annn En A iii iii i i RT ri O EEE IONICO GIOIE ORO ENO _____________ 2 2 2 2 2 2 e n eeni Camera Lens V IN Socket Description Front facing camera for video recording Operation indicator lights that are used to visually indicate that the vehicle is equipped with a dash cam Connects to rear view camera
16. inuous and incident recording gt Memory Format Formats the MicroSD card L Formatting will completely erase all video files stored in the memory card Video Overwrite Sets the overwriting option which will allow new video files to overwrite oldest video in storage reserved for each mode Cautions O It is recommended that you back up data before formatting the memory card O Once you format the memory card all data will be deleted and cannot be restored O The method for formatting a MicroSD card might vary depending on the computer operating system 26 3 5 Dual Save Videos gt Dual Save Videos A Videos 16 Copy to SD Copy Delete All Delete gt Videos View Dual Save video list gt Copy to SD Copy all videos saved on the internal memory to MicroSD card gt Delete All Delete all videos saved on the internal memory 27 3 6 Settings gt Camera Settings Camera settings Brightness F Mid Brightness R Mid v Wide Dynamic Range ON gt Brightness F R Sets the video recording brightness for front rear camera gt Wide Dynamic Range Sets the WDR mode to record clear video even under large variation of backlightingillumination 28 3 7 Settings gt Record settings D Record settings a Impact Sens Mid Use Park Mode ON Parking Sens Motion Sens gt Impact Sensitivity Sets the impact sensitivity level gt Use Parking Mode Monitors vehicle ignition status to a
17. n between the equipment and receiver gt Connect the equipment into an outlet on a circuit different from that to which the receiver is connected gt Consult the dealer or an experienced radio TV technician for help FCC CAUTION Any changes or modifications to the equipment not expressly approved by the party responsi ble for compliance could void your authority to operate the equipment This Class A digital apparatus complies with Canadian ICES 003 2 Caution Depending on the make and model of your car the power may be constantly supplied to the dash cam even with the ignition turned off This may result in vehicle battery discharge 4 This device is designed to record video while the vehicle is in operation The quality of the video might be affected by weather conditions and the road environment such as day or night presence of street lighting entering exiting tunnels and the surrounding temperature 4 gt THINKWARE is NOT responsible for the loss of any recorded video during operation Although designed to withstand high impact of car collision THINKWARE does NOT guarantee re cording of accidents where the impact may cause the device to be damaged 4 Keep the windshield clean for optimal video qual ity amp If a foreign substance e g fingerprints is at tached to the lens it may reduce the quality of the recorded videos Keep the lens clean all the time The specified operating temperature of this prod u
18. ncy of incident recordings O Driving over speed bump manhole or uneven road at high speed can also be detected as incident O Professional product service is required for replacing internal memory 18 2 5 Recording Videos While Parked This feature is available only when the dash cam has been hardwired directly to the vehicle battery Separate purchase for the hardwiring cable accessory and professional installation is required 2 5 1 Incident Recording gt When the dash cam detects impact while parked it will imme diately store the 10 seconds prior and after the impact The 20 second impact recording is saved on the MicroSD card under the parking_rec folder 2 5 2 Motion Detection Recording The dash cam and the optional rear view camera are both equipped with motion detectors which are used to detect motion that initiates video recording while the vehicle is parked gt When the dash cam detects motion while parked it will immediately store the previous 10 seconds prior to the activation of motion detection start recording video for the next 10 seconds The 20 second motion detection recording is then saved on the MicroSD card under the folder named motion rec Cautions O The device can record up to 1 minute for continuous impacts in the case of multiple collisions 19 2 6 Manual Recording In addition to recording accidents the dash cam allows the user to initiate manual recording mode
19. ning 2 2 1 Safety Camera Alert Safety Camera Alert Using GPS and database safety camera alert will warn the driver when approaching traffic enforcement zones such as red light camera speed camera average speed camera and mobile speed zones 1 Enable the safety camera alert feature in LCD Menu gt Settings gt Road Safety Settings gt Safety Camera Alert Road safety settings Safety Camera Alert Y SetSafety Warning Zone Setting Vehicle type sedan Alert will be displayed on the LCD screen when approaching nearby points of interest i Continuous 120 km h 15 5V gt Resetting GPS L Built in Internal GPS can be reset by selecting Main Menu gt About Device gt GPS Info gt Reset GPS Cautions O This feature may not be available in some countries O GPS may be affected by weather conditions satellite signal and or surrounding geographical features O Coated windshields can interfere with GPS signal which may result in poor or blocked GPS reception O Other electronic devices and or equipment may interfere with GPS signal if placed too close to the dash cam 13 2 2 2 Advanced Driver Assistance Systems ADAS gt ADAS Auto Calibration e C00000000000000C0000000C0000C000C0C0C00C0C00C0C00CC0C0C00C0C0C000C00C0C00C0C0C0C00C0C00C0C00C00C0C000C00000C0C0000000C000000C0C0C0C00C0C0CCCCCCCCCCOCCOCCCCCOCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCOCCC 000 1 ADAS settings must be calibr
20. ocal and regional laws before mounting to windshield lt gt The device and or installation parts have moving parts and may shift in extreme road conditions such as unpaved road Check frequently to ensure the device is positioned as instructed in this guide 4 Do not operate or handle power cable with wet hands Do not use a damaged power cable 4 Keep the power cable away from heaters or other hot objects lt gt Check that power cable with correct connector is used and the connections are secure and firmly in place 4 Do not pull insert or bend the power cable using excessive force 4 Do not place heavy objects on the device and the power cable Do not modify or cut the power cable 4 gt THINKWARE does not guarantee that devices or peripherals not authorized by THINKWARE will be compatible with its Product 4 Do not attempt to insert foreign objects into the device or power cable Do not spill or spray liquid into the device as it may cause malfunction fire or electric shock This device is intended to be used inside the ve hicle only 1 Getting Started This unit was tested with shielded cables on the peripheral devices Shielded cables must be used with the unit to ensure compliance 1 1 In the Package Mount with 3M tape Adhesive Cable Holder lea Car Charger Sea Main Dash Cam Unit 3 a a a dj a ja a aa a p a a Rear view camera MicroSD memory card with Rear V
21. of important data it is recommended that recorded footage from the MicroSD card is cop ied to other storage devices for back up purposes 1 4 Vehicle Installation 1 4 1 Connecting the Device and the Mount 1 Align the mount with the connector A and slide it towards B until it clicks into place 2 Remove the protective film from the camera lens THINKWARE mmm 4 1 4 2 Installing the Device 1 Clean the area on the windshield where the dash cam will be installed 2 With dash cam main unit still attached to the mount remove the protective tape from the back of the mount 3 Attach the adhesive side of the mount on the windshield where it has an unobstructed view of the road but does not interfere with the driver s view The camera is located on the left side of the main unit so install the dash cam on the right of center behind the rearview mirror To ensure that the mount is safely secured it is recommend ed that you separate the device from the mount after instal lation and press the mount towards windshield for 5 minutes to maintain pressure Allow 24 hours until the adhesive on the mount has set before connecting the dash cam 1 4 3 Connecting to power 1 Connect the power cable to DC IN socket of the device Plug the car charger adapter end of the power cable into a 12V DC vehicle power socket Arrange the wire by using the adhesive cable hold ers as shown
22. opriate folder Continuous Recording Incident Recording Manual Recording Parking Motion Parking Incident to see the playlist for each recording mode PC Viewer ad Map Satellite UE s ESTE Mr acews MES E Zoae amy So j Y A UYU REGA Suu Caavle DEE AR WOE pe Map data 92013 SK planet Terms ef Use 000 IL m e e e e ee eee eee eee e e e LOn tinuous Manual REC_A 4_02_20_32_36_0 MPA 115 56mb E io REC 20 gd O02 2055360 MP4 115 86mb MAN 2015 08 28 16 15 25 5 MP4 lil REC_2014_04_0 _20_34_37_0 MP4 115 58mb REG_2014_04_02_20_35_37_D MP4 115 89mb REC_2014_04_02_20_56_30_0 MP4 115 90mb REC 2014 04 02 20 97 90 D MP4 115 85mb REC_2014_04_02_20_ MP4 115 93mb REC_2014_04_0 _20_39_39_ 0 MP4 115 56mb REC_2014_04_02_20_40_40_ 0 MP4 115 56mb REC 2014 DA 02 20 41 40 MN hiad 118 01mh Manual Recording Playlist Cs ss RM 37 5 Specifications 5 1 Specifications The specifications of this product may change without prior notice for product improvements Standard 104 3 x51 4 x 29 3mm 109g SS Wala 4 1 x 2 02 x 1 15 inches 0 24lbs _DisplayPanel 27 LCD 320x240 A paa A msec na Continuous Recording Mode Records in 1 minute segments Incident Recording Mode Manual Recording Mode Recording mode Hardwiring cable and installation are Parking Surveillance Mode required for continuous supply of power when vehicle ignition is off Audio Recording E Cam
23. rotected from file overwriting Cautions O Do not use the MicroSD card as an external storage device O Do not tamper with the system files within the in the MicroSD card This may result in unexpected behavior during operation 16 2 4 Recording Videos While Driving 2 4 1 Continuous Recording Mode gt Videos are recorded in 1 minute segments and saved as files in the MicroSD card under the folder named cont_rec 2 4 2 Incident Recording During Continuous Recording Mode gt When the dash cam detects impact it will immediately store the 10 seconds prior and after the impact The 20 second impact recording is saved on the MicroSD card under the evt_rec folder Note that the dash cam will detect impact as incident only if the level of impact is greater than the sensitivity of the G sensor set in the user configuration Cautions O Driving over speed bumps manholes or uneven roads at high speeds can also be detected as an impact and may trigger incident recording O The device can record up to 1 minute of incident recordings in the case of continuous impacts or multiple accidents O The duration of incident footage recorded may vary according to the device settings 17 2 4 3 Dual Save Internal Memory Backup gt Dual Save is a Thinkware proprietary technology that utilizes built in memory as secure backup in addition to the MicroSD memory card Dual Save technology guarantees incident v
24. sua camera comecou a gravar desligue o seu ve culo e espero por 30 segundos e verifique se seu dispositivo muda automaticamente para o modo estacionamento Observa o O Conforme a marca e o modelo do ve culo a dire o com que o cabo de energia constante ser instalada no para brisaspode variar Verifique mais informa es no seu guia r pido Organizando a fia o E A homepage oficial da THINKWARE www thinkwarebrasil com br fornece v deos e imagens adicionais para ajudarem a sua instala o E A THINKWARE n o respons vel pela m instala o e por eventuais danos causados a c meras e os seus acess rios A THINKWARE altamente recomenda a utiliza o de servi os profissional para evitar eventuais danos 10 1 4 4 Connecting the Rear View Camera Do not connect disconnect rear view camera while the main dash cam unit is in operation Turn the device off completely before connecting or disconnecting the rear view camera 1 Remove the protective film from the camera Clean the area on the rear windshield where the rear view camera will be installed Remove the protective tape from the adhesive mount and attach the camera at the center of rear window where it can capture the full view of the road With camera facing outwards ensure the mount is on the right side 3 Adjust the rear view camera so that it is facing back ward on the rear window and level with the
25. t Continuous Lists incident recording videos during continuous mode gt Motion Detection Lists motion detection recording videos during parking surveillance mode gt Parking Incident Lists incident recording videos during parking surveillance mode gt Manual Recording Lists manual recording videos initiated by selecting button Cautions O The configured storage capacity may be different from the actual capacity by approximately 30 to 40MB 24 3 3 2 File List 2 Continuous 24 videos REC 2014 05 27 17 29 09 F MP4 H EC_201 4_09_19_13_16_01_F MP4 LA Recording will stop when accessing on screen menu oo PA REC_2014_05_09_13_15_53_F MP4 y i REC 2014 05 05 16 29 21 EMP4 ii oa OS a PERA E cs E i DELLI LI I portai eee Di Sono Ge o o ei O O e e ALL lt U da eis Video file name Current play time Video playback progress bar gt Enter zoom view Mute on off Play Pause Next Previous Video playback with 3X zoom Directional button Exit zoom view 25 3 4 Memory Card Settings pe Mem Card Settings Memory Partition Type A ib Memory Format Format Ww Video Overwrite Setting gt Memory Partition Sets how storage space on the memory card will be allotted for each recording mode L Type A recommended Optimized for continuous recording L Type B Optimized for incident and motion detection during parking surveillance L Type C Optimized for cont
26. time of the memory card 2 8 Upgrading Firmware gt The system will automatically be updated if the MicroSD card contains the firmware upgrade file L The device restarts automatically after the upgrade has been completed gt Make sure your device is always up to date with latest firmware Please check back frequently at THINK WARE website www thinkware com for the latest firmware updates 21 3 LCD Screen 3 1 Main Menu Recording status Change to Live View GPS status f PM 00 00 Data Time 0000 00 00 File List Mem Card Settings Dual Save Videos PA settings Directional Keys Select 22 3 2 Live View LCD screen can be used to verify current recording view Switch to Front Rearview camera appears only when Rear view Back to main menu rearview camera is connected h a j E ii j 120 km 5 5V 2012 12 25 am10 30 THINKWARE DASH CAM X500 i Audio recording status Manual recording Current speed Voltage status YICHODIY TVLIDIA Ke ERE Mater 23 3 3 File List Recording will suspend when browsing through video list and settings menu Visual notification will appear on the screen to confirm the suspension of recording prior to entering the menu 3 3 1 File List 1 File LISt Continuous Incident Continuous dai Motion Detection fem Parking Incident gt Continuous Lists loop recording videos during continuous mode in 1 minute segments gt Inciden
27. to cap ture scenery and or places while driving This feature can also be used to save video as witness where the installed vehicle is not directly involved in an accident Video files saved during manual recording mode are stored in a separate location on the memory card and will be protected from video overwriting in continuous recording mode gt Briefly press the REC button to start recording The de vice will record video for 1 minute 10 seconds before and 50 seconds after as of the time when the button is pressed The recorded video will be saved under the manual rec folder Note that when manual recording is initiated the previous 10 seconds prior to pressing the button will be saved so even if you just missed a scene you can still capture and safely store the video by initiating manual record within 10 seconds of the event Po A o a e e e oe O di capture Jo cont rec I s l 7 de mi 7 lei n NS motion rec pid i H mevelrimmn re aaa a sar Cautions O When the allocated storage for manual recording videos is full oldest video file will be replaced by the new recorded video 20 2 7 Formatting MicroSD Card gt Select Memory Card Format menu located at Mem Card Settings gt Memory Format ps Mem Card Settings Memory Partition Type A Memory Format Format Video Overwrite Setting Cautions OThe MicroSD card should be formatted every 2 weeks to maximize the life
28. used to optimize Advanced Driver Assistance Systems ADAS features L ADAS setup screen Calibration setting for the ADAS features L Sets the vehicle type to be used to optimize Advanced Driver Assistance System ADAS features Sets the LDWS driver assistance notification L LDWS Initialization Initializes LDWS settings L LDWS sensitivity Sets the lane departure detection sensitivity It is recommended that the sensitivity is set at high for wider vehicles L LDWS speed Sets the speed at which the LDWS notification is enabled L Forward Collision Warning System FCWS Sets the FCWS driver assistance notification L FCWS sensitivity Sets the forward collision detection sensitivity L Front Vehicle Departure Warning Sets the notification to alert the driver when the front vehicle has started to move forward from complete stop 30 3 9 Settings gt System Settings System Settings Language English Voice Volume 2 3 LCD Brightness Mid LCD Auto Oft 30 sec gt Language Sets dash cam system language gt Voice Volume Sets the volume level gt LCD Brightness Sets the brightness of the LCD screen gt LCD Auto Off Sets the time for LCD auto shut off L When LCD is off pressing any button will turn the LCD screen back on gt Security LED Sets the pattern for security LED gt Time Zone Sets the time zone gt Daylight Saving Time DST Sets the daylight saving time gt Speed Unit Sets the unit for the ve
29. utomatically convert to parking mode when the vehicle engine is turned off Parking Sensitivity Sets the impact sensitivity during parking recording mode gt Motion Detection Sensitivity Sets the motion detection sensitivity during parking recording mode gt Off Timer Sets the timer for the dash cam to automatically shut down in parking mode to prevent from draining the vehicle battery Off Voltage Sets the voltage level for the dash cam to automatically shut down in order to prevent from draining the vehicle battery Cautions O Tips on sensitivity It is recommended that you set the sensitivity according to vehicle type High sensitivity setting is rec ommended for cars with softer ride such as luxury sedans while low sensitivity setting is recommended for cars such as performance cars trucks or SUVs which tends to have stiffer suspension settings O It is recommended to format the memory card when settings have been changed O Backup important video files before formatting the memory card 29 3 8 Settings gt Road Safety settings gt Road safety settings safety Camera Alert System safety Camera Alert ON v Setsafety Warning Zone Setting Ti Road safety Warning systen Vehicle type Sedan gt Road Safety Warning System L Road safety settings Sets audible notifications for road safety warnings gt Advanced Driver Assistance Systems ADAS L Vehicle type Sets the vehicle type to be
30. vehicle and the road 4 Using the cable included in the package connect the rear view camera to the V IN port of the main dash cam unit After installation connect the rear view camera to the main dash cam unit and record sample videos to adjust video angle and orientation The rear view camera will operate only when the cable is correctly connected and the power for the main unit is ON Cautions O Thinkware hompage www thinkware com provides various guides to assist with the rear view camera installation Please refer to the detailed product guide before installing the rear view camera O Thinkware is not responsible for damages to the main unit and or any attached accessories due to improper user installations O Thinkware strongly recommends installing all accessories with a certified vehicle technician to avoid damages 11 2 Basic Operations 2 1 Turning the Device Power On Off gt Once connected to the vehicle the device will automatically turn on and off with vehicle ignition 0 Power cable for vehicle gt To manually turn the device on off press and hold the Power button for 3 seconds Cautions O Some vehicles may use a 12V power outlet that stays powered with the engine off If the dashboard cam era stays plugged in battery drainage may occur Please consult the vehicle manufacturer to see if your vehicle uses such power outlets 12 2 2 Road Safety War
Download Pdf Manuals
Related Search