Home

NAS103 Product User Manual

image

Contents

1. Select a time server from the list enable daylight savings if required and then click Save to apply the new settings It will automatically synchronize the date amp time over the internet with a time server Manually When set to Manually you can enter the date amp time manually and click Save to apply the settings You can also click on Sync with PC to synchronize the time with your computer The date and time settings are only accurate as long as the power is turned on If the renew mode is set to Manually and you turn off or remove the power supply the date and time are reset If the renew mode is set to Automatic and a time server is selected it will automatically synchronize the time at start up Network IP Setting By default the IP Setting is set to Automatic IP This is the recommended setting and will allow the network drive to obtain its IP address automatically If you prefer setting it manually select the Static IP option enter your own values and click Apply to confirm the new settings Setting it manually is useful when you need to have a static IP address in order to mount the network drive or set up port forwarding To find out the correct settings for a static IP setup refer to your network router settings or ask your system administrator IP Setting PPPoE DDNS Portal Service Automatic IP O Static IP as below IP Address 192 168 33 35 Subnet Mask 255 255 255 0 Gate
2. DHCP server on the local network the DHCP server will be enabled automatically IP 169 254 0 1 Mask 255 255 255 0 Gateway N A SMB FTP WebDAV Service By default Samba FTP and WebDAV services are enabled allowing you to view files directly in your browser WebDAV Service transfer files with an FTP application FTP Service or by mounting the network drive via SMB SMB Service If you only use one of these services we recommend disabling the others for security reasons You can always enable it again later Media Service The UPnP AV media server can be used to share your photos music and videos that are stored on the network drive with an Xbox 360 PlayStation 3 video game console WMP12 or other DLNA compatible devices that are connected to the same local network as well as stream music to Tunes media players Share Management Account A ccount Account List User Name Password Cass Status Enable You can create a maximum of 16 accounts For folders and account names use only the English alphabet without any special characters or spaces The default account is created automatically The user name is guest and no password has been set Like any other account you can modify delete or disable it Only the folders on the sharing list will be accessible on the network Click on an account and then use the arrow buttons to add and remove the folders from that list Deleting a folder will also e
3. the port forwarding will not work anymore Port Numbers By default the administration port is set to 8000 and the WebDAV port is set to 8080 If you have more than one network drive installed in the same local network or if you run into conflicts with other network devices change the port number to a different number and click Apply to save the settings Remember to change the port forwarding if you make any changes to the port numbers here For Windows XP users to mount the network drive the port number for WebDAV has to be set to port 80 Make sure to set up port forwarding accordingly Maintain Disk Firmware Reset Reboot DISABLE 149 01 GB Free 149 05 GB Total A Sleep Time To save energy and keep the drive cool we recommend setting the sleep time Select a time from the list between 10 to 60 minutes When the drive is idle for longer than the set time it will automatically go into stand by mode and spin down If you need immediate access to the drive set it to Disable and the drive will keep spinning at all times Format Disk Use this tool to format your hard drive and prepare it for the network drive When you format the hard drive using this disk utility it will create a single partition using the exFAT file system If you create other partitions or choose a different file system when connected through USB keep in mind that the network drive is only able to recognize the first partition and it
4. 9 234 13081 webdav FTP Port 21 21 or 1025 65500 Codepage English Photo Folder PUBLIC Music Folder PUBLIC Video Folder PUBLIC Tunes Playlist 2 songs WebDAV Server The WebDAV server section displays the current port number and IP address of your WebDAV server When you access the network drive from the local network use the Internal URL When accessing the network drive remotely meaning not in the same local network as the device is connected to use the External URL The Folder icon on the landing page is a shortcut to open the WebDAV connection so you don t have to login to Settings just to find out the correct URL On Windows when mounting the network drive via WebDAV the file size for a single file is limited to 50MB This is a limitation of the Operating System and not the network drive Use the web browser to download the files instead or see http support microsoft com kb 900900 for more information about how to modify the registry on your Windows machine FTP Server The standard port for the FTP service is 21 If required you can change it and use any port number from 1025 65500 however generally we recommend using the default port 21 When you change the port number for the FTP server remember to adjust your firewall otherwise the FTPaccess will likely be blocked By default the encoding is set to English If you want to store or transfer files with a different enc
5. NAS103 Product User Manual SV SCCM MO MA M tdi 2 CentlICAIO Neri 2 A 3 A 3 NetWork rss id A ici 5 Po SEEMING asar 5 A secant etn ataneseaas etaiae 5 BaD Soe ne eR OR eR Pe Se 6 Portal SEVICE ia 7 MaN A eere E 9 PP A ET E eaten ee ct E E EAEE 9 AN La e PT N 10 REES Sa E A A RA 12 REDOO traes 13 SOR VIC C tasa nraias 14 Share Management nea afr NA SN tela 15 PAC COU Vs ds 15 Adding and Modifying an ACCOUNL ccccccssecccsececeesceceeeceeeaeceseuecessueeees 15 SOVON ae N E E T O E 18 WebDAV SEE e a ead ta nei ines 18 A a a e A 19 MES Crea cace aici a cectsaaceees aun neese cag acaaias aieeiaeee nese cee enue 20 TIN CS PAN E EE PEE E EEA E E A EON A 20 Frequenti y Asked QUESTIONS iiinn pt ledeudavieas bias inietnaveensigeecevaateaeks 21 LOC Ien ST 21 FIE ACCO Snusar E EE 21 System Information Identification Identification Administration Date and Time Host Name cloud landisk Group Name Note Host Name first character can not be number 0 9 Host Name By default the host name is set to use the MAC address This name is used to identify your device on the network If you prefer a different name that is easier to remember change the name and click Apply When selecting a new host name make sure to use a unique name and not one that has already been used on the local network Also the new host name must not begin with a number Uppercase and lowercase letters are not distinguished When apply
6. TP port 21 SMB ports 137 139 HTTP port 80 and UDP port 14675 for the Nettool utility Additionally port 6881 is required for the BitTorrent client File Access FTP access on my Mac doesn t work properly The FTP utility on the Mac is able to read the data on the network drive but cannot write new data to the drive To upload files please install a dedicated FTP application Why can I not delete or modify the content via USB f you encounter problems when accessing the drive via USB please scan the disk for errors For Windows users right click on the drive and select Properties Go to Tools and under Error checking click Check now Select Automatically fix file system errors and click Start Can I use the device as USB and network drive at the same time No it can only be used either as a USB drive or as a network drive but not both at the same time When both cables are connected the USB connection will have priority ve connected the USB cable but it does not show up on my computer If the device is currently used as a network drive it has to be restarted first How can delete files in the Folder view The Folder view only allows you to upload and view the files To delete and manage the files use an FTP client or mount the network drive via WebDAV or SMB When mounting the drive the main difference for SMB is that both the network drive and the computer have to be on the same loca
7. alue Please restart system Prevent this page from creating additional dialogs Resetting the device does not delete any of your media files that are stored on the network drive Firmware Reset Reboot Click the Reboot button system will be restart This can be used to restart the network drive after a firmware update Make sure all current operations are completed before rebooting the device 1 Click Reboot to restart the system Firmware Reset Reboot system will be restart 2 Click OK three times to confirm the restart This will restart the device All open connections will be reset Are you sure 3 3 The system is now restarting Please wait for about 60 seconds and then login again System Reboot Service DHCP Server ENABLE O DISABLE SMB Service ENABLE DISABLE FTP Service ENABLE DISABLE WebDAV Service ENABLE DISABLE Media Service ENABLE DISABLE Services can be enabled and disabled according to your personal requirements In general when a service is not in use we recommend to disable it DHCP Server In most cases the DHCP server should be disabled in order not to interfere with your existing DHCP server At home your router will be assigning the IP address or in the office most likely a dedicated DHCP server is already running When the network drive is connected directly to your computer via patch cable or if there is no other
8. ate A PDF manual would quickly be outdated and the information might no longer match the current product However the Wiki will always be kept up to date and you can access it any time you need to If you like to read some of the information offline please select the export odf or export pdf tab at the top of the Wiki to save the current page on your computer or use the Book creator also on the top of the Wiki to create a PDF booklet with multiple pages
9. has to be exFAT In order to access the exFAT partition when the device is connected via USB Windows XP requires Service Pack 2 or later and Windows Vista requires Service Pack 1 or later exFAT driver update for Windows XP and Server 2003 http support microsoft com kb 955704 exFAT driver update for Windows Vista is part of SP1 http support microsoft com kb 935791 Formatting the drive will erase all data and settings as well as deleting the SMB folders and FTP accounts Firmware Reboot Firmware Here you can update the firmware for your network drive 1 Download the latest firmware and loader from your vendor s website 2 Store the files on your computer and decompress them if necessary 3 Click Browse and locate the firmware BIN file on your computer Reboot Firmware Please select new firmware to upload Brows 4 Select and open the new firmware to start the update process 5 Click OK to confirm the firmware update This will flash the firmware Please don t turn off the power and close the web browser when the firmware is uploading Are you sure 6 During the update process take no other actions and make sure the power is left on This might take a few minutes 7 Once the update process is completed you will be prompted to reboot the system Upgrade firmware successfully Please restart system 8 Click OK to close the pop up window 9 Goto Reboot and click Reboot t
10. he DDNS function 2 Select one of the available service providers from the drop down list 3 For DYNDNS go to www dyndns com 4 Create a free account with the service provider and register your preferred name 5 Enter the host name user name and password into the corresponding fields 6 Click Apply 7 The network drive will connect to your DDNS account and update its IP address whenever it changes 8 To establish remote access to your network drive when it is connected to a network router or switch you need to configure port forwarding e g Web Ul port 8000 or WebDAV port 8080 For more info about how to set up port forwarding on your router seehttp portforward com 9 You are now ready to enter your newly registered domain name in the web browser and access your network drive remotely Remote login is already enabled and setup by default Go to http myisharing com enter the MAC address 12 digits all in one word No further configurations are needed The DDNS service for this NAS was designed to be used with a PPPoE connection If your NAS is behind a network router and not connected directly to the external IP this function will not work Instead please use our web portal at hitp myisharing com for remote login Portal Service This service is required for remote logins to the web interface and for remote file access via WebDAV The Host Name displays the server name for remote login When the portal
11. ing the new name it will check with the web portal at myisharing com to see if the new name is still available and then register it for remote login at the same time If the name has already been taken the Portal Service will be disabled and you need to enter a new name if you want to use the web portal for remote login If you are unable to mount the network drive on Linux change the host name from the default MAC address to a name that starts with a letter and not a number Group Name This should be the same name as your workgroup In general the default WORKGROUP will work but if your workstation belongs to a different group change it and click Apply to save it Administration Identification Administration Date and Time Administrator Password Max 12 Bytes C Administrator This is the account used to manage your network drive The user name admin cannot be changed but we strongly recommend changing the password as soon as you have logged in for the first time to prevent any unauthorized access To change the password enter your new password verify it and click OK to apply the changes Date and Time Identification Administration Date and Time Renew Mode O Automatic Manually Time Zone MES SNTP Server clock sec oro other Date 2011 it ALE yyyy mm dd Time hh mm ss Automatic If internet access is available we recommend setting the renew mode to Automatic
12. l network whereas for WebDAV it also works when done remotely loading and transfer speed are usually slower when done outside the local network For more details see Mapping a Network Drive on a PC or see WebDAV ona Mac Miscellaneous Does the device support SSH or Telnet access No it does not support SSH Telnet or TFTP access The NAS does not recognize my HDD The network drive can only access the first partition and it has to be formatted using the exFAT file system We recommend to always use the disk utility of the network drive to format the drive formatted the HDD via USB but the NAS does not work properly The network drive is only able to recognize the first partition and for the NAS system it has to be exFAT If you intend to use the drive for your NAS and not only when it s connected via USB we strongly recommend that you format the drive using the disk utility of the NAS Login as administrator go to System settings and select Maintain Select Disk and click Format This will erase all existing data on the hard drive and create a single partition using FAT64 exFAT Q Why is there no PDF manual Each product includes a quick installation guide helping you to setup and familiarize yourself with the hardware For the software all information can be found on this Wiki There is no PDF manual because the software is often updated and both features and functions may change with each upd
13. o restart the system Firmware Reset Reboot Click the Reboot button system will be restart 10 Click OK three times to confirm the restart This will restart the device All open connections will be reset Are you sure 68 11 The system is now restarting Please wait for about 60 seconds and then login again to check if the firmware version has been uploaded correctly System Reboot If there is a new update available the FW update LED lights up green and you can push the FW update button to update the firmware The light turns off as soon as you push the button but wait about 30 seconds for the firmware update to complete and the system to restart Never turn off your device or remove the power during the firmware update procedure as it may cause irreparable damage Firmware If you experience unexpected problems and after updating the firmware we recommended to reset all settings Resetting the device will set all settings except the SMB and FTP accounts back to its original factory default settings 1 Click Reset Firmware 2 Click OK three times to confirm and reset all settings This will restore device s default settings Please don t turn off the power and close the web browser when the system is changing the settings Are you sure 3 5 ene 3 Click OK to close the confirmation window and reboot the device System has reverted to the default v
14. oding different language choose the corresponding language from the drop down menu list Click Apply to confirm the selection and change the language setting If you are unclear about which encoding to select click help for further details In order to transfer and store the files it is important that you select the correct language Central Europe CP1250 shqipe hrvatski e tina Magyar polski romana srpski slovencina slovenski Cyrillic CP1251 Asop6aj4aH Benapycki 6bnrapcku MaKeOHCKY ja3nk Ka3ak Kbiprbis3 MoHron xan pycckun cpnckn Tatap ykpalHbcka V36ek Latin CP1252 Afrikaans euskara catala dansk Nederlands English f royskt suomi francais galego Deutsch islenska Bahasa Indonesia italiano Bahasa Malaysia norsk bokmal norsk nynorsk Portugu s Espanol Kiswahili svenska Greek CP1253 gMnyvik Turkish CP1254 Azarbaycanili Turkce U zbek Hebrew CP1255 n nay Arabic CP1256 9 134 221 Baltic CP1257 eesti latvie u lietuvi Vietnam CP1258 Ti ng Vi t Nam Thai CP874 ne Japanese Shift JIS CP932 H 4 52 Simplified Chinese CP936 gt 1 Korean CP949 Traditional Chinese CP950 yx 88 Media Server The UPnP AV media server can be used to share your photos music and videos that are stored on the network drive with an Xbox 360 PlayStation 3 video game console WMP12 or other DLNA compatible devices that are connec
15. rase all the files that are stored inside that directory Adding and Modifying an Account 1 To create a new account click the green plus sign Account Account List User Name 2 Enter a name and a password for the user of the new account Define the access rights for the new user Read Only or Read Write and click Add oe g Account Account List a E User Name Ce Status Enable Enable Enable 4 You can modify the current settings and also create and manage the shared folders Click Create to add a new folder or use the default folder that has been created with the new account demo Read Only Read Write Folder List Sharing List PUBLIC BT admin demo 5 Enter a name for the new folder maximum 64 bytes and click OK appl e Max 64 bytes 6 Select the new folder in the Folder List and then click the arrow key to move it to the Sharing List Once it is in the Sharing List the folder can be accessed by the selected user Folder List Sharing List PUBLIC BT demo 7 You can rename and remove the folders from the sharing list at any time When you are done click Return to close the window Folder List Sharing List PUBLIC Deleting a folder will also remove all the files in that directory Server Account Server WebDAV Server Port 16061 Internal URL http 192 168 33 28 13061 webdav External URL http 1271 67
16. service is enabled and running the status shows OK otherwise it shows None Portal Service Host Name CloudSyncPlus 1 Status OK Portal Service ENABLE DISABLE UPnP Port Mapping ENABLE DISABLE Administration Port SUL 8000 or 1025 65500 WebDAV External Port 5030 8080 or 1025 65500 Do not disable the portal service if you want to login to your network drive via the web portal at http myisharing com If you only use the device on the local area network we recommend to disable the portal service for security reasons UPnP Port Mapping This service automatically sets up port forwarding on your network router Not all network routers support this function and some might not even have UPnP If that is the case in your network please set up port forwarding manually To do so login to your router and find the setting for port forwarding For more details on how to use port forwarding please refer to http portforward com Assuming that you are using the default port numbers for the web interface set up a redirect for TCP traffic from WAN port 8000 to LAN port 8000 For file access via WebDAV set up a redirect for TCP traffic from WAN port 8080 to LAN port 80 Because you have to redirect the network traffic to a certain IP address the internal IP of your NAS it s best if you set a fixed IP address for your NAS Otherwise it might change the next time you restart your router or your NAS and
17. ted to the same local network as well as stream music to Tunes media players 1 From the drop down list of the corresponding list select the folder where your media files e g photos music videos are stored 2 Repeat the previous step for each media type photo music video Depending on the video game console only certain media files can be accessed For the Xbox 360 you can play JPG MP3 and WMV files For the PlayStation 3 you can play JPG MP3 MPEG 1 and MPEG 2 files Tunes will only be able to play MP3 music files Tunes Playlist Whenever you add or remove MP3 files to the music directory click Build to refresh the database If for some reasons iTunes lists files that no longer exist or some files are missing click Remove to clear the database and then click Build to build a new database Frequently Asked Questions Login forgot my login what do do f you lost the administrator s password press and hold the reset button turn on the device and wait for 5 seconds Release the button and the device will reset all settings back to its factory default setup The default login is admin admin cannot access the web configuration interface what s the correct IP See How to Login If none of these instructions help reset your device Which ports do have to open on my firewall Depending on the services that are used the following TCP ports will have to be opened for the network drive F
18. way 192 168 33 1 Primary DNS 192 168 33 1 Secondary DNS 0 0 0 0 Apply PPPoE If you are using DSL or a cable modem to connect to the Internet and your network hub switch or router does not dial up automatically enter the PPPoE Point to Point Protocol over Ethernet account information you have received from your provider here and all local users can share one PPPoE connection to access the Internet P Setting PPPoE Status DISCONNECTED Service Name Optional User Name Password Service on Demand Term Meaning Status Displays the PPPoE connection status Service This is an ISP name or a class of service on the PPPoE server Name User Name Enter your user name provided by your ISP Internet Service Provider Password Enter your password provided by your ISP Internet Service Provider Service On The PPP daemon will ONLY connect to your ISP on demand when a LAN user Demand attempts to send data to the Internet When there is no data traffic it will close the connection to the ISP DDNS DDNS Dynamic Domain Name Service allows you to create an easy to remember domain name in order to access your network drive remotely It points to your network drive even when your Internet connection has a dynamic IP address and there is no need to remember an IP address DISABLE ENABLE Service Provider Host Name User Name Password 1 Enable t

Download Pdf Manuals

image

Related Search

Related Contents

  Kühlschrank V-ZUG AG Komfort 60i  D:\My Documents\Documents\A500 Guide\A500 Complete User  Avaya Business Ethernet Switch 50 Series User's Manual  Manual del Usuario  リテーナリング(Cバネ)でソケット取り替えがスムーズ。 しかもコードレス  ミニカウル  Then, handle well every pin of CPU, correctly put the IC socket  User Manual M8 Pro  

Copyright © All rights reserved.
Failed to retrieve file