User manual
Contents
1. charged Tip e Normally a full charge takes 2 hours Pair the headphones with your mobile phone Before you use the headphones with your mobile phone for the first time pair it with a mobile phone A successful pairing establishes a unique encrypted link between the headphones and mobile phone The headphones store the last 4 devices in the memory If you try to pair more than 4 devices the earliest paired device is replaced by the new one There are two ways to pair your headphones with your mobile phone 4 EN e Manual pairing e NFC pairing Manual pairing 1 Make sure that the headphones are fully charged and turned off 2 Press and hold the on off button until the blue and white LED flashes alternately L gt The headphones remain in pairing mode for 5 minutes 3 Make sure that the mobile phone is turned on and its Bluetooth feature is activated 4 Pair the headphones with the mobile P phone For detailed information refer to the user manual of your mobile phone NFC pairing 1 Make sure your headphones are turned on 2 Make sure you turn on the NFC function on your phone and your phone s screen remains active 3 Place your phone over the headset so that he NFC detection area of each device can ouch each other 4 Pair the headphones with the mobile phone For detailed information refer to he user manual of your mobile phone Note e Make sure your mobile phone h2. Always there to help you Register your product a T upport at www philips com suppor r N Question Contact TX2BT Philips User manual PHILIPS Contents 1 Important safety instructions 2 Hearing Safety 2 General information 2 2 Your Bluetooth in ear headphones 3 What s in the box 3 Other devices 3 Overview of your Bluetooth in ear headphones 3 3 Get started 4 Charge your headphones 4 Pair the headphones with your mobile phone 4 4 Use your headphones 6 Connect the headphones to a Bluetooth device 6 Manage your calls and music 6 Share your music 7 5 Technical data 8 6 Notice 9 Notice of compliance 9 Disposal of your old product and battery 9 Trademarks 10 7 Frequently asked questions 11 EN 1 Important safety instructions Hearing Safety Danger e To avoid hearing damage limit the time you use headphones at high volume and set the volume to a safe level The louder the volume the shorter the safe listening time is Be sure to observe the following guidelines when using your headset e Listen at reasonable volumes for reasonable periods of time e Be careful not to adjust the volume continuously upwards as your hearing adapts Do not turn up the volume so high that you can t hear what s around you You should use caution or temporarily discontinue use in potentially hazardous situations Excessive sound pressure from earphones and hea
3. as the NFC feature available and switched on Make sure your mobile phone is not in standby mode Pairing with NFC is only suitable for Android mobile operating system 4 2 or above Refer to the user manual of your mobile phone to identify its NFC detection area The following example shows you how to pair the headphones with your mobile phone T Activate the Bluetooth feature of your mobile phone select Philips TX2BT 2 Enter the headset password 0000 4 zeros if prompted For those mobile phones featuring Bluetooth 3 0 or higher no need to enter a password Add Philips TX2BT Enter Password Bluetooth device EN Ea 4 Use yo ur Turn the Music Press and hold for 4 headphones call seconds headphones off control L gt The white LED is on and fades out Connect the headphones to a Music control Bluetooth device Task Button Operation Play or pause Music call Press once 1 Tumon your mobile phone Bluetooth raise onal device Adjust volume Press once 2 Press and hold the on off button to turn Skip forward T Long press the headphones on Skip backward Long press L gt The blue LED flashes L gt The headphones are reconnected Call control to the last connected mobile phone Bluetooth device automatically If Task Button Operation the last one is not available the Pick up hang up Music Press once headphones try to reconnect to the a call call 1 bee
4. dphones can cause hearing loss e Using headphones with both ears covered while driving is not recommended and may be illegal in some areas while driving e For your safety avoid distractions from music or phone calls while in traffic or other potentially dangerous environments General information To avoid damage or malfunction pg Caution Do not expose headphones to excessive heat Do not drop your headphones e Headphones shall not be exposed to dripping or splashing Do not allow your headphones to be submerged in water e Do not use any cleaning agents containing alcohol ammonia benzene or abrasives If cleaning is required use a soft cloth if necessary dampened with a minimum amount of water or diluted mild soap to clean the product e The integrated battery shall not be exposed to excessive heat such as sunshine fire or the like e Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type About operating and storage temperatures and humidity e Operate or store in a place where temperature is between 15 C 5 F and 55 C 131 F up to 90 relative humidity e Battery life may be shorter in high or low temperature conditions 2 Your Bluetooth in ear headphones Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welc
5. ecycling the battery before disposing the headset Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment Trademarks Bluetooth The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Gibson Innovations is under license 7 Frequently asked questions My Bluetooth headphones do not switch on The battery level is low Charge the headphones cannot pair my Bluetooth headphones with a mobile phone The Bluetooth is disabled Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headphones Pairing does not work Make sure the headphones are in pairing mode e Follow the steps described in this user manual see Pair the headphones with your mobile phone on page 4 e Make sure that the LED light flashes blue and white alternately before you release he call music button Do not stop holding he button if you see the blue LED only The mobile phone cannot find the headphones e The headphones may be con
6. ence to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged o try to correct the interference by one or more of the following measures e Relocate the receiving antenna e Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body This transmitter must not be co located or operated in conjunction with any other antenna or transmitter Warning Changes or modifications made to this equipment not expressly approved by Gibson Innovations may void the FCC authorization to operate this equipment Model number TX2BT Trade Name Philips Responsible party Gibson Innovations USA Inc 3070 Windward Plaza Suite F Box 735 Alpharetta GA 30005 Notice for Canada This device complies with Industry Canada licence exempt RSS standard s Operation is subject to
7. ions Ltd is the warrantor in relation to this product Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used under license from Koninklijke Philips N V UM_TX2BT_27_EN_V1 0 wk1528
8. le phone B after you stop music playing at mobile EN 7 5 Technical data e Upto 7 5 hours of music time of talk time or 8 hours e Upto 170 hours of standby time e Normal time for a full charge 2 hours e Rechargeable lithium polymer mAh battery 120 e Bluetooth 4 1 Bluetooth mono support Headset Profile HSP Hands Advanced Audio Distribution Profile AVRCP Free Profile HFP Bluetooth stereo supported Profile A2DP Audio Video Remote Control e Operating range Up to 10 meters 33 feet e Auto power off Note e Specifications are subject to change without notice 8 EN 6 Notice Notice of compliance Notice for US This set complies with the FCC rules Part 15 and with 21 CFR 1040 10 Operation is subject to the following two conditions D This device may not cause harmful interference and Q This device must accept any interference received including interference that may cause undesired operation FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interfer
9. nected to a previously paired device Turn off the connected device or move it out of range e Pairing may have been reset or the headphones have been previously paired with another device Pair the headphones with the mobile phone again as described in the user manual see Pair the headphones with your mobile phone on page 4 My Bluetooth headphones are connected to a Bluetooth stereo enabled mobile phone but music only plays on the mobile phone speaker Refer to the user manual of your mobile phone Select to listen to music through the headphones The audio quality is poor and crackling noise can be heard The Bluetooth device is out of range Reduce the distance between your headphones and Bluetooth device or remove obstacles between them The audio quality is poor when streaming from the mobile phone is very slow or audio streaming does not work at all Make sure your mobile phone not only supports mono HSP HFP but also supports A2DP see Technical data on page 8 hear but cannot control music on my Bluetooth device e g play pause skip forward backward Make sure the Bluetooth audio source supports AVRCP see Technical data on page 8 For further support visit www philips com support EN 11 PHILIPS 2015 Gibson Innovations Limited All rights reserved This product has been manufactured by and is sold under the responsibility of Gibson Innovations Ltd and Gibson Innovat
10. ome With this Philips wireless in ear headphones you can e enjoy convenient wireless handsfree calls e enjoy and control wireless music e switch between calls and music What s in the box Philips Bluetooth in ear headphones TX2BT OOD Replaceable rubber ear caps USB charging cable for charging only Quick start guide Other devices A mobile phone or device e g notebook PDA Bluetooth adapters MP3 players etc which supports Bluetooth and is compatible to the headphones see Technical data on page 8 Overview of your Bluetooth in ear headphones OLA 4 O Microphone Q On off music call control control button GB NFC detection area LED indicator Micro USB charging slot Volume Track control button EN 3 3 Get started Charge your headphones e Before you use your headphones for the first time charge the battery for 5 hours for optimum battery capacity and lifetime e Use only the original USB charging cable to avoid any damage e Finish your call before charging the headphones as connecting the headphones for charging will power the headphones off You can operate the headphones normally during charging Connect the supplied USB charging cable to e the micro USB charging slot on the headphones and e the charger USB port of a computer t LED turns white during charging and turns off when the headphones is fully
11. p second last connected device control Reject an usic Press and hold for incoming call call 2 seconds control L gt 1 long beep e Ifyou turn on the mobile phone Bluetooth device or Switch caller Music Press twice activate the Bluetooth feature after turning on the during a call call L beep headphones you have to reconnect the headphones control and mobile phone Bluetooth device manually Mute unmute tand Press once the microphone L gt 1 beep in a call e Ifthe headphones fail to connect to any Bluetooth device within range in 5 minutes it will switch off automatically to save the battery life Other headphones indicator status Headphones status Indicator Manage your calls and music On off Task Button Operation Turn the Music Press and hold for 2 headphones call seconds on control The headphones are connected to a Bluetooth device while the headphones in standby mode or while you are listening to music The blue LED flashes for every 8 seconds The headphones are ready for pairing The LED flashes blue and white alternately The headphones are on but not connected to a Bluetooth device The blue LED flashes quickly If no connection can be made the headphones will turn itself off within 5 minutes Low battery level The white LED flashes 3 times for every 10 seconds until it is out of power Battery i
12. s fully charged White LED is off Share your music With MusicChain y of songs and share mu headphones Ou can create a series sic between two same Headphones A Headphones B Connect to mobile phone A Connect to mobile phone B and place it near headphones A Start sharing music to headphone B 1 Double click the music call button L gt Your hear 2 beeps L gt The blue and white ight flashes alternately 2 Wait for the connection with headphone B Ly You will hear Pairing please wait Waiting time varies from 15 to 60 seconds Start sharing music from headphone A 1 Click the music call button for 3 times L gt You hear 3 beeps Ly The blue white and off light flashes alternately 2 Wait for the connec tion with headphone A It may take 1 minute or the connection timeout will occur after 1 minute Ly You will hear Pair ing please wait Waiting time varies from 15 to 60 seconds To disconnect from headphone B double click the music call button To disconnect from headphone A double click the music call button Ea 60 seconds phone A e Waiting time for music sharing may vary from 15 to e Make sure you place headphones A close to headphones B in order to have a better the connection process and duration e During music chain mode if headphones B are connected to mobile B you can share music from mobi
13. the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This Class B digital apparatus complies with Canadian ICES 003 IC Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments This transmitter must not be co located or operating in conjunction with any other antenna or transmitter Disposal of your old product and battery ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused This product may contain lead and mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact EN 9 your local authorities or visit www recycle philips com This product contains non removable batteries Do not incinerate Batteries may explode if overheated e For disposal or recycling information please contact your local authorities or visit www recycle philips com Remove the integrated battery Note e Make sure the headset is disconnected from the USB charging cable before removing the battery If there is no collection recycling system for electronic products in your country you can protect the environment by removing and r
Download Pdf Manuals
Related Search