micromodul UC3 - Junostatic.com
Contents
1. Faderfox UC3 or USB audio device use shift key for fader mute to avoid value jumps use shift key for fine control with the encoders single step control hold down the encoders while turning them to have a faster and easier control to min center max values additional bargraph in the value display shows single steps on highres 14 bit controls use setup 9 to 16 if you need same command numbers on faders in each group Tips for edit mode control selection is possible too by shift moving the control encoders send data out by shift turning the encoder to check the encoder function in your application use copy paste functions to duplicate groups or parts of them only encoders or faders hold down encoder 6 channel set to set the same channel to all controls within one setup Tips for setting up with Ableton Live decompress the control surface setup from included CD file UC3 ZIP and copy the included UC3 folder into Ableton s midi remote script folder On Windows this is located in Program Ableton Live x x x Resources MIDI Remote Scripts On OSX this is located in Ableton Live app gt Right click gt show package contents Navigate to contents app resources MIDI Remote Scripts don t forget to select the control surface UC3 in Live s preferences midi sync and select the input amp output ports Faderfox UC3 use UC3 internal setup 15 to control tracks 1 to 8 and setup 16 to control tracks 92. sends all setup data as midi notes to an external midi recorder This is useful to backup all data and to duplicate the data to a 2nd device Choose the last setup number encoder 1 which should be send 16 for total backup start your external midi recorder and then start the send function by holding down encoders 5 6 The display shows the setup number which is currently in progress count down It takes about 3 5 seconds per setup 55 seconds for all 16 setups With the receive function you can restore the saved data Start that function by holding down encoders 7 8 followed by starting the external midi player Note that you play the midi file with same tempo as recorded and don t modificate the data otherwise You can also connect two devices by any routing software and play all data directly from device to device by the send and receive functions User manual UC3 version 1 Mathias Fuchf3 Software Entwicklung Op n Idenkamp 13a 22397 Hamburg Germany info faderfox de www faderfox de
3. to 16 encoders are automapped only to rack devices of the first three racks on each track manual mappingings of all controls are possible override of instant mappings prefer to use absolute mode for the encoders to get values displayed immediately instead relative mode use high resolution 14 bit mode for manual mappings to sensitive parameters like resonating filters etc to avoid any audible control noises don t forget to select midi mode Absolute 14bit in live s bottom row Factory settings setup 1 8 9 16 Encoder 1 8 all absolute 7 bit all channel numbers setup number acceleration mode 3 group 1 2 3 4 5 6 7 8 CC 008 015 016 023 024 031 064 071 072 079 080 087 088 095 096 103 008 015 016 023 024 031 064 071 072 079 080 087 088 095 096 103 Fader 1 8 all absolute 7 bit all channel numbers setup number group 1 2 3 4 5 6 7 8 CC 032 039 040 047 048 055 056 063 104 111 104 111 104 111 104 111 104 111 104 111 104 111 104 111 104 111 104 111 104 111 104 111 Fader 9 group 1 8 all absolute 7 bit all channel number setup number CC 112 CC112 Edit mod UC3 Copy Paste to N current setup N t N current setup e completely e e completely Copy Paste to N amp current group N t current group f e completely e completely e e e e Copy Paste Setup number 1to 16 Cpye only encoders of current gro
4. ent Please do not use any cleaning liquids or water so you avoid any damages to the instrument Package contents Device USB cable with angle plug Manual CD with settings and manuals Introduction Thank you for choosing a Faderfox controller These probably world s smallest controllers are designed for live use on stage All Faderfox controllers are professionally manufactured in series in Germany ensuring high quality The 3rd generation brings a lot of new features like USB connection with bus powering better controls and much more UC3 is a universal controller for all kinds of midi controllable software on Mac PC and iPad The all rounder UC3 has 8 push encoders and 9 faders all switchable to 8 groups that allow to control a total amount of 136 control parameters Various kinds of midi commands like program change pitchbend and control change in relative and absolute mode with different acceleration amounts over 7 and 14 bit resolution are possible All these properties are fully programmable on the devices very fast and easy for each control separately A small display informs about programmings and control values The encoders can work as high resolution 14 bit controllers too control change or pitchbend which makes them suitable for sensitive parameters like resonating filter cutoffs or similar things Use the internal 16 setups to save your individual settings The factory settings are perfect to control music a
5. fects the warranty conditions especially regarding safety issues it is absolutely essential that you read through and follow all instructions Safety precautions and servicing Instrument s intended use is based on the functions and procedures contained in this manual Read all instructions for use as well as all enclosed literature before using the instrument Use only in closed rooms not for outdoor use Never use in a moist or humid environment laundry rooms swimming pools etc Not for use in the vicinity of heat sources radiators ovens etc Operational temperature is in the range of 0 40 C Not for use in the vicinity of flammable material The instrument should not be in direct or prolonged contact with sunlight Dusty environmental conditions should be avoided Connect only to USB ports of computers or hubs No foreign objects are permitted inside the instrument casing No liquids should get inside the instrument casing Never let the instrument fall to the ground casing and or control elements may be damaged If the instrument must be opened for example to remove foreign objects from the casing or for other repairs this may only be done by qualified personnel The USB cable must be disconnected before opening the instrument Guarantee is void for defects that occur if the instrument was opened by an unauthorised or unqualified person Use a soft towel or brush to clean the instrum
6. micromodul UC3 ole nn RJ User manual Provision of guarantee and product liability The seller warrants for faultless material and proper manufacture for a period of 24 months from the date of sale to the end user Excluded from the stated guarantee are defects on parts as the result of normal wear and tear These parts are mostly faders sliding guides potentiometers encoders buttons switches and touchpads Also excluded from the guarantee are damages that are the result of incorrect or inappropriate handling excessive force mechanical or chemical influences incorrectly connecting the instrument with other instruments incorrect or inappropriate use The warranty is void if the instrument is opened or changed In addition there is no warranty for individual parts and components in particular semiconductors and disposables consumables The seller is not liable for consequential damages which are not the result of criminal intent or negligence on his part The following conditions must be met in order to claim the warranty services Instrument is either in its original packaging or similar packaging Copy of the invoice with the serial number clearly visible Meaningful error report or description of the error is attached The buyer assumes all costs and dangers of return shipments to the manufacturer Since the user s manual which is included with each instrument also af
7. nd video software products out of the box if they are freely assignable So any additional device programming isn t necessary for many applications Last but not least this little box is also a great extension for your Ableton Live setup There you can control all the continues parameters like track volumes rack macros send amounts track pannings etc A special control surface script for Ableton Live 8 with all necessary mappings is enclosed in the package With that script you can also use two UC3 devices to control up to 16 tracks simultaneously Check out this amazing power box and you will get a reliable mate Features Universal controller for all kinds of midi controllable software iPad compatible with camera connection kit Control surface setup for Live 8 is shipped with the controller no manual mapping necessary USB interface class compliant no driver necessary 8 push encoders without detents resolution about 36 pulses 8 faders with 45 mm length crossfader with 45 mm length 4 digit display to show control values and programming data 14 bit high resolution encoder mode for sensitive parameters data feedback for encoders avoid value jumps All controls fully programmable in the device by channel type number and mode Advanced programming functions like copy paste and channel set 8 groups for all controls About 136 commands per setup 17 controls x 8 groups 16 setups with backup functi
8. onality USB bus powering consumption less than 500mW 100mA Very compact design in a black plastic casing with metal faceplate 180x105x70 mm 350 g System requirements PC or Mac with a free USB port 1 0 or higher or any USB hub iPad with iOSS or higher not used in global group ral Track select in global group Sand Cue volume in global group Sand Track volume of Track 1 to 8 setup 15 Track 9 to 16 setup 16 Ableton L Setup 15 not used in global group ive 8 setup faderfox UC3 Track 1 8 Setup 16 Track 9 16 not used in global group Quantization in global group Glob Master Pan in global group Press both shit k to entenleave edt mode Control Hold stift and push oncode to select Ju eys Ind Channel Number Master volume in global group s utt FLL EHH ice setup 15 only faderfox Shift functions Push encoder to select group Fine control with all encoders Fader mute on all faders General Tips connect the controller with the included USB cable before you start your application blinking USB display indicates that the controller is not yet recognized by the computer the controller is recognized by the computer as
9. t in the left display digit shows a full copy buffer You can overwrite or delete it by the copy function To program a control you have to select the control by encoder 5 firstly A second way is shift moving the control Then you can edit the control parameters channel type number and mode acceleration by the corresponding encoders You can choose between 6 different types for the encoders and 4 types for faders There are the control types CC relative CC absolute program change CC absolute highres and pitchbend The most used type is CC absolute with number and value ranges about 0 127 The CC type should work with each software so please try this at first The type CC absolute highres sends two CC commands one for MSB high value and a 2nd for LSB low value so you get a real 14 bit value Possible CC numbers for this type are 0 31 MSB 32 63 LSB The pitchbend type is send as 14 bit value too The mode parameter controls the acceleration amount 0 3 for the encoders so you can find your best individual feeling with the encoders With the channel set function holding down encoder 6 you set the same channel to all controls of one setup Pay attention that all modifications will only be stored by selecting another setup or leaving the edit mode Two factory reset functions allows you to get back the original content Hold down encoders 1 2 to reset setups 1 8 and use encoders 3 4 to reset setups 9 16 The send function
10. trol change absolute mode f high resolution values 0 to 16383 Pitch bend p N values 0 to 16383 e 11171 RIG neh Fadl Fader number f whol 1to9 of whole controls in current setup St Hold down for about 4 seconds to Channel set Fad Programming The internal data structure is build on 16 setups with each 8 groups of 8 encoders 9 faders Groups are selectable by shift pushing the associated encoder The display shows the selected group Enter and leave edit mode by pressing both shift keys A small point in the lower right corner of the display indicates the edit mode Show up the different parameters without editing by pressing the encoders shortly Various functions to accelerate editing duplicating and saving the internal data are available in edit mode There are copy paste channel set factory reset and send receive functions You have to start these functions by holding down one or two encoders until a running bargraph on the display will be disappeared about 4 sec Select and store setups by turning encoder 1 You can copy setups groups and parts of groups encoders or faders to other setups and groups With encoder 2 you select and start the copy function setup group encoder or fader After that choose the destination setup group and start the paste function with encoder 3 A small poin
11. up pste only encoders to current group e e Copy Paste N only faders N t only faders q e e of current group e to current group Acceleration amount 0 off to 3 max Hold down for about 4 seconds to Hold down for about 4 seconds to Control mode Acceleration amount for encoders only Setup number Copy function Paste function Hold down for about 4 seconds to Factory reset Hold down for about 4 seconds to Factory reset of setup 9 to 16 of setup 1 to 8 res Tes Hold down for about 4 seconds to Receive Hold shift and push encoder to select group Press both shift keys to enter eave edit mode Hold down for about 4 seconds to Send setup data Channel setup data of current setup to setup1 Pec Control number for control change amp program change types BIRS Control change e Control channel Encl 101 Control type Control select Control change relative mode 1 for encoders only values 1 127 Encoder number Channel number relative mode 2 Control number 1t08 1t0 16 values 63 65 0 to 127 amp for encoders only Control change absolute mode i e values 0 to 127 Program change D i values 0 to 127 Con
Download Pdf Manuals
Related Search