Proflex Basketball Set (INS-P-10401B).pub
Contents
1. ProFlex Basketball Set User s Manual AWARNING Read these materials prior to assembling and using this basketball set DO NOT allow more than one DO NOT attempt or allow person on the trampoline DO somersaults Landing on the NOT allow more than one head or neck can cause serious i person inside the trampoline injury paralysis or death even enclosure Use by more than when landing in the middle of the DA one person at the same time bed can result in serious injury t DO NOT intentionally rebound vw Kol off the barrier DO NOT attempt to jump over i pie V the barrier 4 A eM DO NOT hang from kick cut litt or climb on the beret a Retain address information for future use JumpSport Inc 408 213 2551 2055 South 7th Street Suite A www jumpsport com San Jose CA 95112 U S A P N INS P 10401B Copyright Notice This material is protected by the United States copyright laws and is proprietary to JumpSport Inc Disclosure reproduction translation modification or use of this document by anyone other than authorized employees authorized users or licensees of JumpSport without the prior written consent of JumpSport Inc is prohibited The information in this document is subject to change without notice JumpSport Inc shall not be liable for any damages resulting from technical errors or omissions which may be present in this document or from use of this document Copyright 2003 2006 by2. JumpSport Inc All rights reserved Printed 2006 Instruction Manual P N IN S P 10401B JumpSport ProFlex Basketball Set P N BBJ S 10397A AlleyOop ProFlex Basketball Set P N BBA S 10398A ProFlex Hardware Upgrade Kit P N BBA S 10399A Trademarks JumpSport AlleyOop Sports and ProFlex Basketball Set are trademarks of JumpSport Inc All other brand or product names aretrademarks or registered trademarks of their respective companies or organizations Patents This product includes technology associated with oneor more of thefollowing U S Patents No 6 053 845 No 6 261 207 No 6 840 891 No 6 846 271 Additional Patents Pending How to Contact Customer Support Should you require customer service or technical support for your JumpSport AlleyOop Sports ProFlex Basketball Set please contact J umpSport s Customer Service department at 408 213 2551 8 00am 5 00pm Monday through Friday Pacific Time Before installing and using your ProFlex Basketball Set you must read and follow all safety rules on this page A WARNING It is the responsibility of the owner to become familiar with the safety rules and to convey these rules to all users e Read and follow all of the warnings and use instructions for your trampoline and safety enclosure e Read and follow all rules specified on the warning labels that came with your trampoline safety enclosure and basketball set If labels or signs become lost or unreadabl
3. Ley ry ON DHT NSS VS Z Your ProFlex Basketball Set is now fully assembled and ready for use Please remember do not hang from the basketball set 10 Assembly and Installation I nstructions Picture B Type B Assembly Note Use pages 4 amp 5 to help with part names and numbers Not all parts will be used for this installation Kretu x 25mm bolt Ref 17 with M10 washer Ref 18 connects ends ai back Kretu with V brace Ret 5 V M8 standard nut Ref 26b 2 center countersunk ri hn 1 1 Lay back plate with V brace on back of backboard as shown Lay front plate on front of backboard as shown Insert an M8 Plate should be oriented so that 2 center countersunk holes at standard nut into each indentation on front plate plate s base are facing away from backboard H and tighten an M 10 x 25mm bolt with M10 washer to each long end of V brace The Note If the M8 standard nuts will not easily fit all the way into M10x 25mm bolts will be snugly tightened at a later Step the indentations gently tap the nuts into place using an appropriate tool such as a rubber mallet M8 screw Back plate Ref 26a with V brace through M8 standard nuts on front plate Tighten until screws are flush with nuts on front of backboard as shown Do not over tighten Assembly and Installation I nstructions Picture B 140mm CN xy Bolt reference MD DH Parts not to sca
4. a 13mm hex wrench a 14mm hex wrench a 17mm hex wrench and a Phillips screwdriver Two double sided hex wrenches are included in Box 2 see Reference 3 and 4in thelist below An 8 foot A Frame ladder will be useful for some Steps use care and follow procedures for use Safety glasses and gloves are also recommended for safety Parts List Your ProFlex Basketball Set is shipped with the parts shown below The backboard ships in one box and all the other parts and hardware are shipped in a second box If any parts are missing immediately call J umpSport Customer Service at 408 213 2551 Note M10 bolts and related hardware are bigger in diameter than M8 bolts and related hardware The two wrenches are the only parts not shown on the following page Reference Part Description Quantity Box 2 6 PLA P 10337A fFrontplate S y O Ct CT g NET P30889A et 7 gt 9 BALP 10340A Bali tt 12 CAP P 10369A __ Standard cap fits poles with Picture B ball end cap with eyebolt far lea F z 2 2 18 WAS P 10346A_ M10 washer fits M10 bolts CT 2 19 NUTP 10374A_ M10 standard nut fits M10 bolts CC 4 2 20 INUT P 10352A_ M10 Nylock nut fits M10 bolts J 4 2 21 INUT P 10353A_ M10 acorn nut fits M10 bolts FT 4 gt 24 WAS P 10351A Spring washer fits thick wire springs S 8 2 VA VAX DRT WRN NES REV f Q i M A Assembly and Installation Inst
5. over all four M10 bolts sticking through back plate with V brace not the center M8 bolt Then screw an M10 Nylock nut over top two M10 bolts Thread nuts down until they just touch the washers N ext screw an M 10 standard nut over bottom two M 10 bolts and thread nuts down until they just touch the washers Tighten all nuts 1 full rotation and stop Hand tighten an M10 acorn nut over top two M10 bolts only Now snugly tighten the M 10 x 25mm bolts at each long end of the back plate with V brace Cap with notch Ref 11 sd M8 Nylock nut Ref 25c M8 washer Ref 25b M8 acorn nut Ref 25d M10 Nylock nut 6 Ref 20 9 O Pole clamp Ref 13 M10 acorn nut Ref 21 lt Assembly and Installation I nstructions Picture A 9 Detach Velcro connection around top of net Place net over hoop Reattach Velcro around hoop working clockwise Back of backboard 10 Important Basketball Set should be installed on a pole directly opposite the entrance to the safety enclosure Remove existing ball end cap from pole Install cap with notch to top of pole With the bottom two M 10 bolts straddling the encl osure pole install a pole clamp and two M 10 Nylock nuts as shown M8 bolt should slide through holein cap with notch Place M8 washe and M8Nylock nut over M8 bolt Tighten all Nylock nuts evenly Then hand tighten acorn nuts on to end of bolts Assembly and Installation Instructions Picture A XS
6. PORT IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RESPECT TO ANY LOSS INCLUDING BUT NOT LIMITED TO ECONOMIC LOSS LOSS OF PROPERTY LOSS OF REVENUE OR PROFITS LOSS OF ENJOYMENT OR USE COST OF REMOVAL INSTALLATION OR OTHER CON SEQUENTIAL DAMAGES SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CON SEQUENTIAL DAMAGES ACCORDINGLY THE ABOVE LIMITATION MAY NOT APPLY TO YOU THE WARRANTY EXTENDED HEREUNDERISIN LIEU OF ALL OTHER WARRANTIESAND ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN ITS SCOPE AND DURATION TO THE TERMS SET FORTH HEREIN SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS ACCORDINGLY THE ABOVE LIMITATION MAY NOT APPLY TO YOU How to get a defective part replaced 1 Call the JumpSport Customer Service department at 408 213 2551 to obtain a Return Authorization number All returns must be pre authorized 2 Send the part s to the designated Service Center along with a copy of your original sales receipt and a brief written description of the problem induding how it occurred You must pay freight and insurance to return the part to JumpSport At JumpSport s sole discretion we may ask you to send photographs in addition to or in lieu of returning the part 3 After inspecting the returned part s JumpSport will ma
7. all the way in and rotate it until the hex head is Tighten until screw is flush with nut on front of backboard as flush with the front plate as shown shown Do not over tighten Assembly and Installation Instructions Picture A Q C R SH WY DI i Bolt reference Parts not to scale LD Spring washer Ref 24 Spring washer Ref 24 Long spring M10 x 95mm with thick wire bolt Ref 22 Ref 16 V gt VW OMD gt Uo gt Gm Short spring M10 x 120mm with thick wire bolt Ref 23 Ref 15 6 Assemble 4 bolts e Taketwo M10 x 95mm bolts and two M 10 x 120mm bolts e Add 1spring washer onto all 4 bolts e Add 1long spring with thick wire to each M10 x 95mm bolt and 1 short spring with thick to each M10 x 120mm bolt e Add 1spring washer onto all 4 bolts 7 Insert the two M10 x 95mm bolts into top two holes of front plate and thread them through back plate with V brace until long spring with thick wire will not slide along bolt Then tighten bolt 1 full rotation and stop Now insert the two M10 x 120mm bolts into bottom two holes of front plate and thread them through back plate with V brace until short spring with thick wire will not slide along bolt Then tighten bolt 1 full rotation and stop C i Nylock nut and acorn nut Ref 18 20 and 21 Back plate with V brace sf 8 On back of backboard place an M 10 washer
8. e please contact us immediately for free reolacements e The ProFlex Basketball Set should be used only as described in this manual The basketball set must only be mounted on a JumpSport or AlleyOop Sports safety enclosure system It should never be mounted on any other device structure or in any manner not described in this manual Do not attach anything to the basketball set or safety enclosure that is not a manufacturer approved accessory or part of the enclosure system e DO NOT allow more than one person on the trampoline DO NOT allow more than one person inside the trampoline enclosure Use by morethan one person at the same time can result in serious injury This includes one on one type games and any other games or activities where more than one person is on the trampoline at the same time e Trampolines over 20 inches 51 cm tall are not recommended for use by children under 6 years of age e Donothang from kick cut or climb on any part of the basketball set or safety enclosure e Removeall jewelry watches and hair clips before using the basketball set e Wear clothing free of drawstrings hooks loops or anything that could get caught in the basketball set or safety enclosure e Donotusethetrampoline or basketball set while under the influence of alcohol or drugs e Donotinstall the basketball set on a pole that is near or over a missing or damaged frame pad e When notin use store the basketball provided with your set in a dr
9. e net over hoop Reattach Velcro around hoop working clockwise Assembly and Installation I nstructions Picture B End of eyebolt flush with end of Nylock nut Eyebolt Short spring with thin wire Ref 10 9 Important Basketball Set should be installed on a pole directly opposite the entrance to the safety enclosure Remove eyebolt and ball end cap from pole Reinstall eyebolt and Nylock nut placing short spring with thin wire over eyebolt between eyebolt cap and top of pole Tighten N ylock nut just enough so end of eyebolt is flush with end of nut as shown Standard cap Ref 12 Back of backboard M10 Nylock nut Ref 20 M10 acorn nut Ref 21 10 Install standard cap to top of pole With the bolts straddling the enclosure pole just below the eyebolt install pole damps and M10Nylock nuts as shown Tighten all Nylock nuts evenly Then hanc tighten acorn nuts on to end of M 10 bolts 13 Assembly and Installation Instructions Picture B 11 After backboard is mounted push eyebolt cap toward pole then place net into eyebolt hook When net is in place let the spring return the eyebolt cap to dose the hook IS RY Your ProFlex Basketball Set is now fully assembled and ready for use Please remember do not hang from the basketball set 14 Sa Va Sa a a Va Va a a Va rr rr as Va Va Va Va Va ee Va Vo Va i lt Limited 90 Day Warran
10. ke a final determination whether the part is covered by this warranty We reserve the right to examine photographs or physical evidence concerning parts claimed to be defective prior to making a final determination concerning the daim A repaired or replacement part will be returned to you Please allow 3 to 4weeks for ddivery This warranty gives you specific legal rights You may also haveother rights which vary from state to state F II lt A A PIPPI IIIT 6x vw x x x x PPP III III JumpSport Inc 2055 South 7th Street Suite A San Jose CA 95112 408 213 2551 http www jumpsport com
11. le Spring washer Ref 24 Spring washer Ref 24 Long spring M10 x 140mm with thick wire bolt Ref 22 Ref 14 l IITIN NDI INI A DM A DOWD f D gt G mt Short spring with thick wire M10 x 120mm bolt Ref 23 Ref 15 5 Assemble 4 bolts Take two M 10 x 140mm bolts and two M 10 x 120mm bolts Add 1spring washer onto all 4 bolts Add 1long spring with thick wire to each M10 x 140mm bolt and 1 short spring with thick to each M10 x 120mm bolt Add 1spring washer onto all 4 bolts Back plate with V brace A 7 On back of backboard place an M10 washer over all 4 bolts sticking through the back plate with V brace Then screw an M10 standard nut over each of the bolts Thread the nuts down until they just touch the washers Then tighten each nut 1 full rotation and stop Now snugly tighten the M 10 x 25mm bolts at each long end of the back plate with V brace 6 Insert the two M10 x 140mm bolts into top two holes of front plate and thread them through back plate with V brace until long spring with thick wire will not slide along bolt Then tighten bolt 1 full rotation and stop Now insert the two M10 x 120mm bolts into bottom two holes of front plate and thread them through back plate with V brace until short spring with thick wire will not slide along bolt Then tighten bolt 1 full rotation and stop 8 Detach Velcro connection around top of net Plac
12. ructions This basketball set is designed for 2 types of enclosure poles so you will have extra parts Ref 11 after completing the installation SPH YH NY CN af pere 0 SS J D airi co Ref 21 D 5 Bolt ruler arr Om shown to Assembly and Installation Instructions Before you begin installing your ProFlex Basketball Set please check to see what kind of ball end cap you have installed at the top of your safety enclosure poles Ball end cap with notch Ball end cap with eyebolt on top no eyebolt no notch X A Type A assembly Type B assembly instructions begin on instructions begin on page 7 page 11 EN SB Assembly and Installation Instructions Picture A SSRI S W TSA Type A Assembly Note Use pages 4 amp 5 to help with part names and numbers Not all parts will be used for this installation M10 x 25mm bolt Ref 17 with M10 washer Ref 18 connects ends of back plate with V brace Ref 5 2 center countersunk holes the indentation gently tap the nut into place using an appropriate tool such as a rubber mallet M8 screw Back plate Ref 26a with V brace Back plate with V brace 3 Insert an M8 screw through lower middle hole on back plate 4 Now place an M8 x 80mm bolt through upper middle hole on with V brace and thread through M8 standard nut on front plate front plate Push it
13. ty What is covered by this warranty This warranty covers any defects in materials or workmanship on all of the components of the JumpSport AlleyOop Sports collectively referred to here as JumpSport ProFlex Basketball Set and is extended exclusively to the original retail purchaser How long does this coverage last Warranty coverage for each component begins from the original date of purchase and lasts for 90 days What will J umpSport do If you return the defective part to JumpSport as instructed below JumpSport will either repair or replace such part at JumpSport s discretion and return it to you What is not covered by this warranty This warranty does not cover expenses of onsite labor trava assembly or disassembly or other charges associated with the repair or replacement of covered components This warranty also does not cover any problem that is caused by abuse misuse ordinary wear and tear weathering acts of God such as wind and lightning failure to follow directions improper installation or improper maintenance Rust is a natural occurrence with any outdoor steel product and is likewise not covered by this warranty to the extent that it does not affect the structural integrity of the part This warranty does not cover the trampoline or any related safety enclosure to which the basketball set attaches See individual trampoline and safety enclosure warranties for specific coverage details for those products JUMPS
14. y location e Usethetrampoline and basketball set only with mature knowledgeable supervision Overhead Clearance Adequate overhead clearance is essential A minimum of 24 feet from ground level is recommended Provide clearance for wires tree limbs and other possible hazards Lateral Clearance Lateral clearance is essential Place the basketball set away from walls structures fences and other play areas Maintain a clear space on all sides of the trampoline and trampoline enclosure Level Surface Place the trampoline and trampoline enclosure on a level surface before installing and using the basketball set Lighting Use the basketball set in a well lighted area Artificial illumination may be required for indoor or shady areas Security Secure the trampoline and trampoline enclosure against unauthorized and unsupervised use Underneath Clearance Remove any obstructions from beneath the trampoline and trampoline enclosure Note The trampoline enclosure is only to be used as an enclosure for a trampoline and the trampoline must be of the appropriate size as covered by the specific enclosure Note The owner and supervisors of the trampoline are responsible to make all users aware of practices specified in the Use Instructions Do not install the basketball set on a pole that is near or over a missing or damaged frame pad Assembly and Installation Instructions Tools Installation of the ProFlex Basketball Set requires
Download Pdf Manuals
Related Search