Owner`s Manual - VOXX International Corporation
Contents
1. roS EH x 3 sooo 10 30 29 28 27 26 25 24 Function control is available on the unit and the remote control Function not available in this model 1 POWER Button Press this button to turn the unit ON and OFF 2 MONITOR SELECT M1 Button Sets the remote control code to allow control of the unit set to M1 mode only M2 Button Invalid function for this model 3 TV Mode Select Button Switches certain function keys on the remote control for TV functions MMD11 A 7 10 11 12 13 DVD Mode Select Button Switches certain function keys on the remote control for DVD functions SOURCE Button Each time the button is pressed the audio video source will change in the following sequence DVD gt AUX gt AV1 AUTO MEMORY Button AUTO PROGRAM Button When the AUTO MEMORY button is pressed all channels are searched and channels that are detected with signals of sufficient levels are automatically stored in memory SKIP SEARCH Button This button selects between SKIP and SEARCH mode In SKIP mode the TV tuner will tune and stop on channels that are programmed into memory when the CHANNEL UP DOWN buttons are used When the SKIP mode is disable the TV will stop on all active channels ERASE WRITE Button While tuned to a channel pressing this button will alternately store or erase the2. 11 OVERHEAD LCD MONITOR WITH DVD PLAYER OPERATION MANUAL 128 8652 Important Notice Installation of overhead products requires careful planning and preparation Be extremely careful when working on a vehicle with side curtain air bags Do not route wires near any portion of the side curtain air bag assemblies This includes any anchor points inA B C or D pillars of the vehicle Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occupants If you have any questions regarding wire routing in a vehicle please contact Audiovox Technical Support at 1 800 225 6074 When connecting power and ground in a mobile video installation ensure that the ACC wire is fused at the point where it is connected to the vehicle ACC wiring Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection point and the mobile video product An LCD panel and or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information system control rear or side observation or navigation If the LCD panel or video monitor is used for television reception video or DVD play the LCD panel or video monitor must
3. 0 55 4 158 F 20 70 C 15 000 Hours NTSC PAL 1 0Vp p 75 ohms 12V DC LxWxH 14 0 x 12 0 x 2 0 356mm x 305mm x 60mm Specifications subject to change without notice 22 MMD11A 12 MONTH LIMITED WARRANTY 00 Applies to Movies Go Mobile Video Products AUDIOVOX ELECTRONICS CORP the Company warrants to the original retail purchaser of this product that should this product or any part thereof under normal use and conditions be proven defective in material or workman ship within 12 months from the date of original purchase such defect s will be repaired or replaced with reconditioned product at the Company s option without charge for parts and repair labor A game controller if supplied is similarly warranted for ninety 90 days To obtain repair or replacement within the terms of this Warranty the product is to be delivered with proof of warranty coverage e g dated bill of sale specification of defect s transportation prepaid to the Company at the address shown below This Warranty does not extend to the elimination of externally generated static or noise to correction of antenna problems to costs incurred for installation removal or reinstallation of the product or to damage to digital memory media devices gaming devices discs speakers accessories or vehicle electrical systems This Warranty does not apply to any product or part thereof which in the op
4. 12 13 14 15 16 1 EJECT A Button This Button is used for ejecting discs from the disc Compartment when the source is DVD and the unit is powered up 2 STOP Button This button is used to stop playback 3 Source Select Use to select one of the four sources DVD AUX AV 1 4 Picture Select To increase the level of selected picture controls 5 Picture Select Button Allows the user to enter the picture adjustment mode 4 MMD11A 10 11 12 13 14 15 16 Picture Select To decrease the level of selected picture controls FMM Source Select Switch Used to select the frequency in sequence rotation FM OFF CH1 88 1 2 CH2 88 3MHz 88 5MHz CH4 88 7MHz CH5 88 9MHz CH6 89 1MHz CH7 89 3MHz CH8 89 5MHz CH9 89 7MHz CH10 89 9MHz 11 90 1MHz CH12 90 3MHz CH13 90 5MHz 14 90 7MHz CH15 90 9MHz CH16 91 1Mhz PLAY gt Button This button is used to start playback of a disc POWER Button Used to turn the system on off Dome Lights Provide additional interior illumination Infrared Transmitter and Sensor Transmits audio to wireless headphones Also allows the remote control to operate the 11 to control other accessories in the system Three Position Dome Light Switch on the dome lights OFF The dome lights will not turn on in this position AUTO Automa
5. channel from memory FMM ON OFF Button Turns the wireless FM Modulator on or off CHANNEL SELECT Button Selects the wireless FM Modulator Frequency CH1 88 1MHz CH2 88 3MHz 88 5MHz CH4 88 7 2 5 88 9MHz 6 89 1 2 7 89 3 2 CH8 89 5MHz CH9 89 7MHz CH10 89 9MHz 11 90 1MHz CH12 90 3MHz 13 90 5MHz CH14 90 7MHz CH15 90 9MHz CH16 91 1MHz RETURN Button Press Return Once Go to disc menu Press Return Twice Go to movies playback DISPLAY Press to display current disc information while the disc is playing Press cursor buttons to select the Title or Chapter For Title Chapter selection use the numeric buttons to enter the desired Title Chapter selection CURSOR CHANNEL UP DOWN 4 Use these buttons to navigate the menu selections on the screen Use the to increase the channel number and use decrease the channel number MMD11A 14 15 16 17 18 19 20 21 22 23 24 25 MMD11 OK Button ENTER Used to implement a selected setting or menu option MENU Button Allows the user to access the DVD menu DVD MODE REPEAT Button Allows the user to repeat a selected title chapter or track AUDIO Button Press to display and select the available AUDIO languages in DVD mode Each time you press the button the language changes Note The languages for audio vary from disc to disc SUBTITLE Button P
6. play and display on the screen the original language contained in the disc Thai MMD11 A 13 VIDEO SETUP 220020 TV DISPLAY setup allows you to adjust screen Rating setting aspect ratio 4 3 This displays the wide picture with black bands on the upper and lower portions of the screen 16 9 This displays a wide picture with black bands on the upper and lower portion of the screen The bandwidth will vary depending on the aspect ratio of the disc TV Type Language The TV TYPE setup allows you to select the system to fit to the color system of the TV to be connected 2 a NTSC Select this type for NTSC TV Multi PAL Select this type for PAL TV Multi Select this type for multi system TV RATING SETUP Rating This item allows you to limit the content of movie playback from G to Adult The lower the value the more strict the control G PG Language PG 13 Password R NC 17 Adult The rating level can only be changed when the displayed lock is open For first time use to change parental control using cursor button to enter parental mode key in the default password 3308 and press OK Press OK button again to select the parental level select the level and press OK To change the password to your own password press Change Password mode and enter the default p
7. press OK The selected song is added to a new program and the check mark disappears move cursor to program view function and press OK to browse the songs in the program MMD11 17 In Edit Mode if Add to program function is used highlight Program view function and press OK the following selections appear m 9 Edit Mode Browser View Clear Program Edit Mode Browser View Clear Program Music Playing Method When Add to program function is finished highlight the Browser view function the songs in the new program are displayed To delete a selected song highlight the selected song a check mark appears to the left of the selected song Highlight Clear program function and press OK the song will be deleted DVD Basics To get the optimum use out of the DVD section make sure you read this section completely Regional Coding Both the DVD player and DVDs are coded by region These regional codes must match in order for the disc to play If the codes don t match the disc play This unit s code is region 1 Other regional codes cannot be played in this unit The unit will display WRONG REGION Types of Discs your DVD will play DVD disc DVD discs which contain video Audio discs Audio CDs contain musical or sound content only e discs A disc that contains audio files for example a CD R with downloaded MP3 files This system is capab
8. repeat function Single Repeat the song being played until STOP is pressed Folder Play all songs a folder repetitively All Play all songs on the disc repetitively Mode play mode The Mode function has 4 options Normal Shuffle Random and Music Intro Move cursor to the desired Mode function and press OK Normal Shuffle Random Music Intro are selected in that order The Mode function default status is Normal Normal Play all songs in folder once Shuffle Play songs in a folder in a shuffled order Each song in the folder is played only once Random Play songs in a folder in a random order Each song in the folder is played only once Music Intor Play each song in order in the folder for 10 seconds Remark The purpose of the Music Intro function is to provide the user with a sample of each song for 10 seconds thereby making it easy to select and listen to a favorite song Edit Mode Program View Add to Program Notice Edit Mode Program view Add to program functions are all related and can not be implemented during play mode or any other program function Program View Add to Program Yy Music Playing Method Make sure disc playback is off Move cursor to Edit Mode function and press OK After Edit Mode is selected open the folder and select the songs which will be compiled A check mark appears to the left of the selected song highlight the Add to program function and
9. the MMD11 A are controlled by a three position slide switch Sliding the switch to the ON position will turn the lights ON The OFF position will prevent the lights from turning ON with the vehicle s interior lighting and the auto position will allow the lights to turn ON and OFF with the vehicle s interior lighting Refer to the Installation Guide for wire connections Do not leave the vehicle unattended with the dome light switch in the ON position as this could result in discharged battery REMOTE SENSOR MMD11 infrared remote sensors to relay signals to the unit when the remote control is pointed at the remote sensor MMD11 A 19 ACCESSORIES WIRELESS HEADPHONES OPTIONAL The MMD11 A includes a built in infrared transmitter for use with the supplied wireless headphones The headphone volume is adjusted using the controls on each headset Any number of wireless headphones may be used but they must be used within a line of sight from the transmitter as infrared transmissions like visible light travel only in a straight line See the documentation accompanying your wireless headphones SOURCE FEATURE AV1 The video input may be connected to a Video Cassette Player VCP video game system or other audio video devices To access the A V inputs turn the MMD11 Aon and press the source button the MMD11 A or the Source button on the remote control until AV 1 is displayed on the screen Turn the video source c
10. times of the original size Twice Enlarge the picture 2 times of the original size 3 times Enlarge the picture 3 times of the original size 4 times Picture is returned to original size SETUP Button Press to display the Setup Menu which allows the user to change the DVD player options such as TV DISPLAY OSD LANGUAGE PARENTAL CONTROL etc Refer to the settings and Adjustments section for more information IRT ON OFF Button Turns the Infrared Transmitter IRT ON or OFF for IR Wireless Headphones Pressing M1 then IRT ON OFF will control the IR Transmitter for M1 MUTE Button Press this button to mute all the audio Pressing the button again restores the sound to the previously set level DAY NIGHT Mode Button This control toggles the unit between Day and Night LCD illumination modes In the Day mode the LCD backlit intensity is at maximum In Night mode the LCD backlit is dimmed to a preset level that is more suitable for low light operation PIX Button Picture Select Each time this button is pressed the on screen picture adjustment displays the adjustment bar for BRIGHTNESS CONTRAST COLOR TINT or RESET Once the desired adjustment bar is displayed use the VOLUME VOLUME button to adjust the setting The display will automatically turn off if no adjustments are made within 6 seconds or is any other button is pressed MMD11A 33 VOLUME DOWN or UP Press to decrease or increase th
11. assword 3308 and press Press OK button and again and key in a new four digit password After complete press OK button to end the process Language Note The Default Password is 3308 This password is Password always effective even after you have selected your own password and changed it To avoid the possibility of others using the default password to set the parental level and change the password you can record this default password in another area and delete it from this manual Some discs can be limited depending on the age of users while some discs cannot 14 MMD11 A Misc SETUP select MISC using Wbutton then press gt button to enter the Miscmenu Select the subtitle you desire using W button then press ENTER to confirm the setting Press lt button to return Load Factory Load Factory allows you to reset all options to factory settings This function will not affect the Rating control settings Screen Saver ON Screen saver will appear OFF Screen saver will not appear Note The DVD player will enable the Screen Saver mode if the unit is inactive for approximately 2 minutes Playing DVDs Language Load Factory Load Factory Rating Language Load Factory Screen Saver Language Load Factory Off On 1 Press the DISPLAY button on the remote control to display the stat
12. be installed so that these features will only function when the vehicle is in park or when the vehicle s parking brake is applied An LCD panel or video monitor used for television reception video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver s seat where it will not be visible directly or indirectly to the operator of the motor vehicle Licensed under one or more of the following patents Patent NOS 5 775 762 and 5 927 784 Warnings Do notuse any solvents or cleaning materials when cleaning the video monitor Do notuse any abrasive cleaners they may scratch the screen Use only a lightly dampened lint free cloth to wipe the screen if itis dirty Lock the LCD screen in the fully closed position when notin use Before putting on headphones always adjust the volume setting to the lowest position Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended as the dome lights if left on can drain the vehicle s battery Do not put pressure on the screen Caution children to avoid touching or scratching the screen as it may become dirty or damaged o 9966 6 Congratulations Congratulations on your purchase of the Movies 2 Go MMD11 A DVD Player with Drop Down Video Monitor The MMD11 Ahas been designed to give you and your family many years of video entertainment in the mob
13. con on the top part of the Setup Menu Then repeat steps 2 5 Exiting the Setup Menu Press the SETUP button again only LANGUAGE SETUP OSD Language Language for On Screen Display Rating OSD MENU The OSD MENU setup allows you to Italian select the language for the on screen display The user can either select English French Spanish German or Italian for the OSD language SUBTITLE SETUP select SUBTITLE using Wbutton then press gt button to enter the Sudmenu Select the subtitle you desire using Wbutton then press OK to confirm the setting Press lt button to return English French Spanish German Rating Q Misc Italian Japanese Chinese Thai Note The subtitle selection is only available for discs that are recorded in the above listed languages If the selected language is not available the player will play and display on the screen the original language contained in the disc AUDIO SETUP select AUDIO using Wbutton then press gt button to enter the Sudmenu Select the audio you desire using Wbutton then press to id confirm the setting Press lt button to return Spanish Rating German Italian Japanese Note The audio selection is only available for discs that cumes are recorded in the above listed languages If the selected language is not available the player will
14. desired track containing the song and press OK to begin track playback Mode Shuffle v Music Playing 21 Album genre Comment Skipping Songs Use the Next button on the remote control to move to the next song Use the Previous M4 button to move to the previous song Selecting a Play Mode Filter For MP3 amp JPEG only Fliter Mode enables or disables the display of files contained on the media based on their file extension m The Filter function applies th the following formats Audio Audio data format MP3 WMA Photo Photo data format JPEG Video Video data format MPEG I 1 Music Playing Flat Mode play the entire disc nm This mode is always on default During the Flat Mode all the data folders with Mp3 JPEG amp movies will be played in sequence If the Flat Mode function is off it will only play the selected folder other folders are disabled Music Playing 16 MMD11A Repeat play repetitively Repeat function has 4 options Single Folder All Move cursor to Repeat function and press OK Off Single Folder All are displayed in that order Repeat default is Off Flat Mode Repeat Mode Normal Music Playing Off Turn of
15. e level of the picture adjustments 34 NUMBER Buttons Allow the user to enter numbers 0 to 9 for selection of selection of CD tracks DVD chapters and password 35 EJECT Button This button is used to eject the disc MENU ADJUSTMENT The System Menu Contains features and options that let you customize your system to change the screen mode display OSD language and source default 1 Press the SYSTEM MENU button on the remote the main page of the system menu will appear on screen 2 Use the cursor buttons A or to select the desired item in the main page press the OK button to select 3 The sub menu will appear on screen 4 Use the cursor buttons or to select an item the sub menu and then press the OK button to select 5 Press the Menu button to exit System Menu Note System Menu be controlled via Remote Control only Items selected in the menu will have a green background SCREEN MODE SELECT This allows the user to change the screen format aspect ratio 16 9 4 3 1 To select the screen aspect ratio format highlight SCREEN MODE and then press the OK button to enter the sub menu Then use the cursor buttons Aor Y to select from either 4 3 or 16 9 Press the OK button to confirm the setting SCREEN MODE OSD LANGUAGE SOURCE DEFAULT DVD 16 9 MMD11 A 11 OSD LANGUAGE This allows the user to select the language for the on screen display The user can eithe
16. ile environment Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment Please note Installation options vary see the individual owner s manuals for each component in your system to obtain a full understanding of each component s operation Safety Precaution For safety reasons when changing video media it is recommended that the vehicle is not in motion and that you do not allow children to unfasten seat belts to change video media or make any adjustments to the system System adjustments can be accomplished using the remote control while seat belts remain fastened Enjoy your Audiovox entertainment system but remember the safety of all passengers remains the number one priority FEATURES 11 TFT Thin Film Transistor Active Matrix LCD Liquid Crystal Display Monitor Built in DVD Player Multi Lingual OSD On Screen Display for Control of Picture Quality and Functions Infrared Transmitter for use with Optional IR Wireless Headphones Three Audio Video Source Inputs DVD AUX AV1 Dome Lights with Built in Three Way Switch Built in 16 Channel Frequency Wireless FM Modulator Last Position Memory for DVD Screen Mode Selection 16 9 4 3 Full Function Remote Control Backlit Controls AV Output MMD11 A 3 CONTROLS AND INDICATORS DIAGRAM FRONT VIEW 8 76543 21 11
17. inion of the Company has suffered or been damaged through alteration improper installation mishandling misuse neglect accident or by removal or defacement of the factory serial number bar code label s THE EXTENT OF THE COMPANY S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT SHALL THE COMPANY S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT This Warranty is in lieu of all other express warranties or liabilities ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL PURCHASE IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product Audiovox Electronics Corporation 150 Marcus Blvd Hauppauge New York 117881 1 800 645 4994 128 6429F
18. ks f you are using the 2 channel IR headphones make sure you turn on the IR headphone power make sure the correct channel A B is selected e Make sure the Modulator is ON and the proper Frequency has been selected Can t advance You can t advance through the opening credits and through a movie warning information that appears at the beginning of movies because the disc is programmed to prohibit that action Not allowed at The feature or action cannot be completed at this time the moment because 1 The disc s software restricts it 2 The disc s software doesn t support the feature e g angles 3 The feature is not available at the moment Picture is distorted The disc might be damaged Try another disc It is normal for some distortion to appear during forward or reverse scan No forward or Some discs have sections that prohibit rapid scanning reverse scan or title and chapter skip If you try to skip through the warning information and credits at the beginning of a movie you won t be able to This part of the movie is often programmed to prohibit skipping through it MMD11 A 21 REPLACEMENT PARTS Remote Control SPECIFICATIONS LCD Backlighting Resolution Pixels Operation Temperature Storage Temperature Backlit life Video Display System Video Output Power Source Dimension 136 4196 Edge Light Tube 800 x RGB x 480 1 152 000 32 131
19. le of playing most recordable DVD formats However due to the variety of disc manufacturers and software playback cannot be guaranteed Loading and Playing Discs Before you load a disc make sure that it is compatible with the player Insert the disc with the label facing the driver Note the following Discs CANNOT be used with this player e MiniDisc e Laserdisc e CD 1 CD ROM DVD ROM Super Audio CD SACD DVD Audio JPEG KODAK 18 MMD11A load and Play Disc Press the Power button to turn the unit ON Select DVD mode and insert the disc Label towards driver into the disc compartment TURNING THE UNIT ON OR OFF 1 Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly Pivot the screen downward until a comfortable viewing angle is reached The hinge friction will hold the screen in position while the system is in use 2 Pressing the power button on the unit or the remote control will turn the system on and off When in use the internal backlighting will illuminate the controls 3 After the unit has been turned on and is displaying a picture adjust the viewing angle by pivoting the screen to optimize the picture quality 4 Remember to turn the unit off and pivot the LCD to the locked position when not in use Power ON OFF Remote Sensor Button Infrared Transmitter Screen Release OVERHEAD DOME LIGHTS The Dome Lights integrated into
20. omponent on with its power button or remote control The MMD11 Ais now ready to play the audio and video signals from the source connected to AV1 input use accessory cable part number 11236820 required AUX The MMD11 accept an audio video input through the RCA jacks located on the rear of the unit The audio video device could be a video game system video camera or other input device Video Out The MMD11 A provides a video output for optional audio video monitor s This output will provide an audio video signal that duplicates the signal displayed by the MMD11A to an additional monitor or video display Please see your installer for more information 20 MMD11A TROUBLESHOOTING PROBLEM SOLUTION IR remote inoperative Verify that the batteries in the remote are fresh e Verify that the remote sensor eye is not obstructed Disc won t play Insert a disc with the label side facing up Check the type of disc you put into disc tray This DVD only plays DVDs audio CDs and MP3s e Both the unit and the disc are coded by region If the regional codes don t match the disc can t be played This DVD player is set to Region Number 1 Play starts but then The disc is dirty Clean it stops immediately Condensation has formed Allow player to dry out No sound or e Make sure your DVD is connected properly Make sure distorted sound all cables are securely inserted into the appropriate jac
21. r select English Spanish French or German for the OSD language OSD LANGUAGE SCREEN MODE ENGLISH OSD LANGUAGE SPANISH SOURCE DEFAULT DVD FRENCH GERMAN SOURCE DEFAULT DVD This allows the user to select from DVD default on Whenever the unit is turned on it will return to DVD mode DVD default off Whenever the unit is turned on it will return to the last source selected SOURCE DEFAULT DVD SCREEN MODE OSD LANGUAGE SOURCE DEFAULT DVD OFF SETTINGS AND ADJUSTMENTS The Setup Menu contains features and options that let you customize your DVD player For example you can set a language for the on screen display or prevent DVD playback for children Using the Setup Menu 1 Press the SETUP button on the remote The Setup Menu appears on the screen as shown per diagram OSD Language English Video Rating 2 order set the desired option move the highlight into the setup area using the cursor button 3 After entering the setup area highlight the desired option using the cursor button A or 4 Press gt to move the highlight to the different options for the selected item Press A to select the desired options and then press ENTER to confirm the selection 12 MMD11A 5 Repeat steps 3 4 to continue setting the options that reside on the same Setup Page 6 To change to another Setup page press 4 until the highlight moves back to the i
22. ress to display and select the available subtitle language in DVD mode Each time you press the button the subtitle language changes Note The type and number of languages for subtitle vary from disc to disc STOP m Button Press to stop playback PREVIOUS 4 Button Press to return to the previous chapter or track SCAN BACKWARD Button Press to search in a backward direction Press repeatedly to change the search speed from 2 4 8 and 16 times the normal speed PAUSE Il Button Allows the user to pause the playback Pressing pause again or pressing the Play Button will resume normal playback PLAY Button Press to activate the play mode when a disc is loaded in the disc compartment SCAN FORWARD gt gt Button Press to search in a forward direction Press repeatedly to change the search speed from 2 4 8 and 16 times the normal speed NEXT gt gt Button Press to skip to the next chapter or track 26 27 28 29 30 31 32 10 Button Allow user to repeat the playback from pointAto point Press buttonOn Screen DisplayDVD player Once Repeat A Mark the beginning of the section to repeat Set point Twice Repeat Mark the end of the section to repeat Set point 3times AB Off Cancel the A B repeat function ZOOM Button Press this button to enlarge the picture when playing DVD disc Press ZOOM button DVD player perform Once Enlarge the picture 1
23. tically switches on the dome lights in conjunction with the vehicle s interior illumination Ventilation Openings LCD Cut Off Switch Used to turn off the LCD panel monitor when in the closed position LCD Panel Screen Release Press to release the screen MMD11 A CONTROL FUNCTION DESCRIPTION SIDE VIEW amp BACK VIEW Side View 1 DVD Disc insertion Slot For loading and removing discs Unit must be in a powered on state to load disc when disc is inserted Insert disc with label side facing Back View 990 J 1 Auxiliary Video Input 2 Auxiliary Audio Left Input 3 Auxiliary Audio Right Input REMOTE CONTROL OPERATION Back View Battery Installation Before attempting to operate your Remote Control install the batteries as described below 1 Turn the Remote Control face down Using your finger slide the battery cover off in the direction of the arrow 2 Install Two AAA batteries Make sure that proper polarity or is observed 3 Align the cover tabs with the remote control and slide the cover until it locks The remote control will operate the MMD11 A It is not a universal remote control and will not control equipment from other manufacturers Battery Cover 6 MMD11A MAIN FUNCTION DESCRIPTION POWER
24. us banner The banner includes title chapter angle audio subtitle title selection amp chapter selection 2 Title Selection Press 0 9 buttons to initiate a change of title selection Then press OK button to implement the selection 3 Chapter selection Press numeric 0 9 buttons to initiate a change of chapter selection Then press OK button to implement the selection As you toggle through the options the repeat option changes at that time The track for example repeats once that track has ended The selected repeat option loops repeatedly until you turn it off MMD11 A 15 Playing MP3 Discs MP3 is a format for storing digital audio An audio CD quality song can be compressed into the MP3 format with very little loss of quality while taking up much less space CD R discs that have been encoded in MP3 format can be played on your DVD player The DVD player plays the songs in the order they were burned on to the disc When playback is started the elapsed time of the track that is playing will be displayed gt 00 00 01 03 13 Imyf 001 MP3 Selecting Folders and Songs When device containing files is loaded in the player the navigation menu appears automatically 1 Press A or to move the highlight to the desired folder if present on the left side of the menu and press OK The songs in the folder will be displayed on the screen 2 Press or to move the highlight to the
Download Pdf Manuals
Related Search