SD3 Diagnostics System User Manual Page 20 Select the USB line
Contents
1. SD3HET LANGUAGE SETTING SPANISH FRENCH ENGLISH GERMAN CANCEL Fig 2 4 32. SD3 Diagnostics System User Manual Select the USB line Select the RS232 line Once you have selected the line just connect the cable If the line selected is RS232 RS232 PC cable see chapter 7 The communication can be extremely slow and one could not be able to use some systems If the line selected is USB USB cable see chapter 7 If the connection is via LAN recommended cross over cable see chapter 7 No cable needed in case of wireless connection Press Language to modify the language used in the SD3NET screens fig 2 4 1 Press the button just below the language flag to confirm your choice and automatically exit the window To void without saving press Esc or press the cancel key The language selected on the SD3 only affects the messages for the routine software which selects and runs the diagnostics programs basic SDS3NET software The diagnostics software language on the other hand is selected in the PC initialization software to avoid any possible inconsistencies make certain that the PC and SD3 are both using the same language Press Esc to return to the previous menu WARNING TO SAVE TESTER DISK SPACE THE DIAGNOSTICS SOFTWARE IS ONLY DOWNLOADED IN ONE LANGUAGE DEPENDING ON THE BASIC SD3NET SOFTWARE SETTINGS ON THE PC TO SET THIS SOFTWARE TO ANOTHER LANGUAGE YOU MUST SELECT THE DESIRED LANGUAGE ON THE PC AND THEN UPDATE THE TESTER LANGUAGE 503 g sD3nET es Page 20 SDSHET
Download Pdf Manuals
Related Search