Primo - Hanna Instruments
Contents
1. C 68 F Primo 2 FS Primo 2 2 FS 0 5 C Primo 5 2 FS Accuracy 20 C 68 F Primo 1 2 FS Primo 3 2 FS 0 5 C Primo 4 2 FS Calibration solution Primo HI 70032 1382 ppm Primo 2 HI 70032 1382 ppm Primo 5 HI 70031 1413 puS cm Calibration solution Primo 1 HI 70032 1382 ppm Primo 3 HI 70032 1382 ppm Primo 4 HI 70039 5 00 mS cm Calibration Primo Automatic at 1382 ppm Primo 2 Automatic at 1382 ppm Primo 5 Automatic at 1413 uS cm Calibration Primo 1 Automatic at 1382 ppm Primo 3 Automatic at 1382 ppm Primo 4 Automatic at 5 00 mS cm Temperature Compensation Automatic 0 to 60 C 32 to 122 F B 2 C Temperature Compensation Automatic 0 to 60 C 32 to 122 F B 2 C Probe Direct fixed Probe Fixed with 1 m 3 3 cable Environment 0 to 50 C 32 to 122 F RH max 95 Environment 0 to 50 C 32 to 122 F RH max 95 Battery Type Life 2 x 1 5V approx 200 hours of continuous use auto off after 5 minutes of non use Battery Type Life 2 x 1 5V approx 200 hours of continuous use auto off after 5 minutes of non use Dimensions Weight 180 x 50 x 25 mm 7 1x2 0x1 0 50 g 1 8 oz Dimensioni Peso 66 x 50 x 25 mm 50 g OPERATION e Turn the meter on by pressing the ON OFF button e Immerse the probe in the sample to be measured without exceeding the maximum immersion level e Stir gent2. Instruction Manual Paumo Series EC and TDS Testers with Automatic Temperature Compensation BAN instruments www hannainst com WARRANTY The Primo series is warranted for one year against defects in workmanship and materials when used for their intended purpose and maintained according to instructions This warranty is limited to repair or replacement free of charge Damages due fo accident misuse tampering or lack of prescribed maintenance are not covered If service is required contact the dealer from whom you purchased the instrument If under warranty report the model number date of purchase serial number and the nature of the failure If the repair is not covered by the warranty you will be notified of the charges incurred If the instrument is to be returned to Hanna Instruments first obtain a Returned Goods Authorization number from the Customer Service department and then send it with shipping costs prepaid When shipping any instrument make sure it is properly packaged for complete protection Hanna Instruments reserves the right to modify the design construction and appearance of its products without advance notice Dear Customer Thank you for choosing a Hanna product Please read carefully this instruction manual before using the meter If you need additional technical information do not hesitate to e mail us at tech hannainst com These instruments are in compliance with the C directives P
3. RELIMINARY EXAMINATION Remove the instrument from the packing material and exam ine it carefully If any damage has occurred during shipment immediately notify your Dealer or the nearest Hanna Customer Service Center Each meter is supplied with batteries and instructions Note Conserve all packing material until the instrument has been observed to function correctly Any defective item must be returned in its original packing ACCESSORIES HI 70031P 1413 uS cm solution 20 mL sachet 25 pcs HI 70032P 1382 ppm solution 20 mL sachet 25 pcs HI 70039P 5 00 mS cm solution 20 mL sachet 25 pcs HI7031L 1413 uS cm solution 500 mL bottle HI 7032L 1382 ppm solution 500 mL bottle HI 7039L 5 00 mS cm solution 500 mL bottle FUNCTIONAL DESCRIPTION Probe level Dime 20M Amo 2 only Max immersion level Fixed probe with Recommended m 3 3 cable Recommended immersion 4cm level 4cm immersion Max immersion level ISTPRIMOR1 05 05 SPECIFICATIONS Beime Prime 2 Kime 5 Range Primo 1999 ppm mg L Primo 2 1999 ppm mg L 0 0 to 60 C Primo 5 1999 uS cm Limo Z Limo 3 Pemo 4 Range Primo 1 1999 ppm mg L Primo 3 1999 ppm mg L 0 0 to 60 C Primo 4 10 00 mS cm Resolution Primo 1 ppm mg L Primo 2 1 ppm mg L 0 1 C Primo 5 1 uS cm Resolution Primo 1 1 ppm mg L Primo 3 1 ppm mg L 0 1 C Primo 4 0 01 mS cm Accuracy 20
4. ly and wait for stable reading The meter auto matically compensates for temperature variations e To extend the batteries life after 5 minutes of non use the meter provides for auto off CALIBRATION e Switch the meter on e Press and hold the ON OFF button for about 3 seconds The required calibration solution value will start blinking on the display to indicate that the calibration mode has been entered 1382 for Aume Primo 1 Primo Primo 5 00 for Aize 4 nd 1413 for Arze 3 Immerse the probe in the proper calibration solution without exceeding the maximum immersion level Stir gently and wait for about 20 seconds Once the display stops blinking the meter is calibrated and ready for use BATTERIES REPLACEMENT The Eb message on the LCD warns the user when the batteries have ene to be replaced Ha Open the bettery compartment and xi replace the both 1 5 V batteries pe 4 COVER while paying attention to the cor rect polarity Batteries should be replaced only in a non hazardous area using the battery type specified in this instruction sheet Important note Once the batteries have been replaced turn the meter OFF and then ON again Wait for about 30 seconds to allow a complete self test and then perform a new calibration ERROR CODES Error in calibration wrong calibration solu tion or damaged probe Over range Low battery indication CE DECLARATION OF CONFORMITY als instrumen
5. ts CE DECLARATION OF CONFORMITY 35030 Sar ITALY herewith certify that the meters PRIMO PRIMO 1 PRIMO 2 PRIMO 3 PRIMO 4 and PRIMO 5 ave been teste Low Voltage Di EN 50082 1 2 Elect TEC 801 3 RF R EN50081 1 Elect ENS EN61010 1 Safet contr Date of Issue _04 09 2000 PU beach A Mars irector Recommendations for Users Before using these products make sure that they are entirely suitable for the environment in which they are used Operation of this instrument in residential areas could cause interference to radio and TV equipment Any variation intro duced by the user to the supplied equipment may degrade the instrument EMC performance To avoid electrical shocks do not use this instrument when voltage at the measurement surface exceeds 24Vac or 60Vdc To avoid damage or burns do not perform any measurement in microwave ovens
Download Pdf Manuals
Related Search