User Manual
Contents
1. Discharge Water Pump MODEL L0807A AN When using electrical equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury to persons including the following 1 Read and follow all instructions before using the pump 2 Check the pump label for proper voltage required Do not connect voltage other than that shown 3 This pump is supplied with a grounding conductor plug To reduce the risk of electric shock be certain that is connected to properly grounded receptacle 4 This is an in line pump NOT a submergible pump 5 Support the pump and assembling and when installed Failure to do so may cause pump to fail and piping to break 6 Keep the cord out of heavy traffic area To avoid fire hazard NEVER put the cord under rugs near heat generating devices Always turn off the pump before servicing Do not operate pump with a damaged parts Never use the pump outdoor 0 Keep unit away from heated surfaces and open flames 1 Do not attempt to repair or adjust any electrical or mechanical functions on this unit Doing so will void the warranty lt a After reading this instruction if you have any questions or comments please call 1 817 633 1080 or contact our technical support department at support l uraco com or visit our website at www uraco com for more information PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS FEATURES OPERATIONS Pump Features Mo2. ess and telephone number e A dated receipt to PROOF OF PURCHASE e Attach a paper with detail the problem you are having Pump Electrical Specifications e Power 60W e Thermally protected 115 OC THANK YOU FOR BUYING LURACO s PRODUCT LURACO Technologies Inc 1132 107 STREET ARLINGTON TX 76011 TEL 1 817 633 1080 FAX 1 817 633 1085 WWW LURACO COM
3. tor e Speed 3500 RPM e Power 1 25 Hp e Single Phase 30W e Rotation CW e Thermally protected Pump e Capacity 400GPH e Pipe Connections Suction 1 Discharge 1 e Head 10 feet e Pressure 4 3 Psi e Weight 4 0 Lb e Dimensions 6 x 3 5 x 4 25 Pump Installation e The pump is installed so that the inlet of the pump must be below the level of the surface of the water being pump figure 1 e Pump must be mounted in an upright position and securely e Do not operate the unit without water The pump is designed to be cooled by pumping water Pump Air Input Figure 1 a Proper installation b Incorrect installation WARRANTY INFORMATION Two 2 Year Warranty 1 This Warranty applies only to the original purchaser of this product 2 This Warranty applies ONLY to repair or replacement of any parts of this product The warranty does not cover dropped or abused unit 3 Unless otherwise proscribed by law The LURACO shall not be liable for any personal injury property or any incidental or consequential damages of any kind resulting from malfunctions defects misuse improper installation or alteration of this product Warranty Instructions If you need to send a unit to us for service please follow the steps below 1 Carefully pack the item in its original carton or other suitable box to avoid damage in shipping 2 Before packing your unit be sure to enclose e Your name with full shipping addr
Download Pdf Manuals
Related Search