Home

IPClient User Manual

image

Contents

1. The IPClient is used mainly for Local Area Network LAN and can achieve centralized management centralized previewing centralized recording With IPClient IP cameras in LAN can be added to IPClient system with just one key and then following functions can be fulfilled conveniently Parameter Setting Video Previewing Recording Records Playback etc Features User friendly GUI Easy to use and easy for operation 4 Centralized management centralized previewing and centralized recording for IP cameras One key Searching and one key adding IP cameras One key starting and one key stopping recording Video adjustment in IPClient for IP cameras Supports IP camera setting remotely With IPClient IP cameras can be full controlled Supports Manual Recording Scheduled Recording and Alarm Recording Supports Video Lost Detection Motion Detection and Alarm Detection Supports alarm output in the methods of snapshot recording voice email alert and alarm module 100 pcs of IP cameras can be added to IPClient Supports various layouts Supports dragging and switching channels Supports window Pop up Supports sequencing of single channel and four channels Auto adjusts to the size of screen 1 2 Operation Requirement Operation System Windows 7 windows XP Windows 2003 PC Configuration It s suggested using current popular PC configuration Note The More IPC added to the IPClient system t
2. Connection Parameters The monitoring picture of network camera added and normal connecting will be shown in the main preview interface Right click the picture to pop up the menu The introduction of functions in the menu Function Instruction Start Record Start the local recording of the channel Stop Record Stop the local recording of the channel Snapshot Capture the image of responding channel video source System Config Set the channel alarm input output store and system environment and so on Remote Config Set up the parameter of network camera remotely mage Controls Adjust the image brightness contrast saturation of one channel or all channels Modify Channel Change network user account of the connecting network camera Remove Channel Delete the camera of the channel Snapshot Viewer Manage the images manual or alarm captured System logs IPClient software operation log and alarm info Restore Configuration Restore IPClient software default setting About IPClient IPClient software version info Remote Setting Function We advise users to modify the password of the network camera as soon as users get the product Select Remote Config to pop up the network camera menu Click System to manage the network user including add user modify password and delete user If the user modify the password of super user admin then other users can t connect using the user admin After modification pl
3. SES TROND ERE TEDE eee ol ee 11 4 Image Configuration c ccccccccccsseesscessceeeeseceseeesecseseescecesecscesscecaeesseessceeseecssesescesseeceecseeeseeeaeees 11 4 1 Image Control ccccccssccsessscsscessesscesessecescesceseceseescessesseeeeeesseseeeseeseecsessesesesseeeeeeeeaeeeseegs 11 4 2 Tre ee qii roenn O 11 4 Su Record Pl A A A A AA 12 44 Image display vu 44852 wits Rootes tees fasene 12 4 4 1 Resolution frame rate video quality srrrnrrronrronrrrnvrrenerennrennvrnrerenrrennrennerenerennrnn 12 4 42 Device O Di eee eta GE SEES S REN 12 44 3 V1d 0 OA e rate AT 12 4 5 Motion Detecta Aid 13 46 Video Loss Adol 13 4 7 Network Connect ontss rosno eer a e R a a dte 13 4 6 Remote Setting iii A A eis a ee one 13 User Manual for IPClient System 4 8 1 System Management ccccccccssecsscesseeeseeeseeeseecseeceseeeseecseecsseesseeeseeeneeseseeeeeenseenas 13 4 8 2 Stream Management cccesscccsssecssscecenseccsnsecssseesesseecesseceseeeseseecssaesesseesensneseans 14 4 8 3 Video Management ccccccessccsccessseesecesecessecsseeeseecseeesseesseecseceesecsseeeeeeseesneeeeeenes 14 4 8 4 User Management iii nedre Neate a E EET 14 4 8 5 Network Management srrnnoronrronvrenvrrenerennrennrrsverenerennrennerererennrensersverenerennesnnereneren 14 REN 14 User Manual for IPClient System 1 Introduction 1 1 Brief Introduction IPClient System is the PC Host end software developed for IP camera
4. actual networks FAQ2 After device is added successfully and connection status is Connected image is not displayed Answer After connection status is connected while there is no image in IPClient The reason maybe is that IP camera is using low version software The resolution ratio of the latest version IP camera s stream is 16 9 While old version camera is 720P D1 or CIF When IPClient is used to manage IP cameras it is advised to upgrade IP camera to the latest version FAQ3 Click Change Password gt Set Network it doesn t appear dialog box of network setting Answer When network is not good and click Bet Network the dialog box of network setting doesn t appear timely Please try it later or restart the IP camera FAQ4 OSD name of IP camera shows HD IPC 01 Answer When set channels at IPClient click default setting to modify relevant channel IP camera OSD into HD IPC indicate channel serial number to differentiate IP cameras The Default OSD of IP camera is HD IPC FAQ5 Double click image why it is switched from standard definition to high definition Answer In order to reduce CPU occupied by main control computer of IPClient when there are great many split screens the standard definition stream will be used While when it is switched from many split screens to single screen the standard definition stream resolution ratio will be switched into high definition stream resolution ratio In this
5. and saturation Operator can adjust IP camera s relevant specification according to demand 4 8 3 Video Management Our company s IP camera supports video recording can be started or stopped by manual 4 8 4 User Management There are three grades user permissions in IP camera The relevant user can be added changed or cancelled according to demand Each grade user has relevant operation permission when connected with IP camera YE Default Username admin Default Password 123456 4 8 5 Network Management The network connection mode can be selected among network wire DHCP PPPOE and WIFE In order to realize multiple network connection modes our company s other products are recommended to be purchased 5 FAQ FAQ1 after device is added successfully the connection status is Connection time out Answer IP camera is connected successfully while it shows Connection time out The 14 wm JE 16 W User Manual for IPClient System reason maybe is that network specification of IP camera doesn t match with IPClient Because IP camera s IP address should is reconcilable with actual networks For example one IP camera which can normally work in 192 168 0 0 network DHCP function is not enabled will have connection time out phenomenon in 192 168 1 0 network In this case please check whether or not the network connection is correct and then confirm the IP camera s IP address is reconcilable with
6. here Start recording of all channels Save directory can be E JdvrFile E is hard disk of PC Record None Stop all the recording Record All Playback Record search and playback Snapshot pictures Save directory can be E JdvrFile CapFile E is hard disk of PC Functions of Split Tour Pop up Snapshot Login Dialog box Minimize Minimize the system Exit the system 2 3 Add Devices 2 3 1 Add devices Click the Devices Icon in Control Panel and we shall see the interface Devices Discovered means the IP cameras have been discovered in the LAN Search button is for searching the IP cameras The buttons of gt gt gt lt lt lt are for Add Add All Delete Delete All of the IP cameras Manually button is for adding IP cameras in WAN Wide Area the dialog box shall be popped up Input the Nvsip ID of the IP camera and click OK Note When the IP camera is added successfully the video of the IP camera shall be played on the according channel The channel No in the list is according the channel No of the host end If we want to change the channel position of the IPC please just enable the function of Allow User to Switch Video Position and then drag the channel to the position that we want If we want to disconnect the video choose the device in the Devices connected and click the lt button User Manual for IPClient System 2 3 2 Modify Device
7. through above software When IP camera is connected with IPClient successfully right click image and select Remote Setting Jto upgrade IP camera and manage network For detailed setting methods please refer to user manual of IP camera Specific functions are in below 4 8 1 System Management The IP camera has some functions such as autotimer device name modification restart recovery system network upgrade and local upgrade etc If IP camera is connected with internet network upgrade is recommended If IP camera works in local area network LAN please contact to get relevant upgrade files For operating instructions please refer to it 13 W JE 16 User Manual for IPClient System user manual of IP camera 4 8 2 Stream Management There are three kinds of streams on our company s IP cameras High definition stream is applied on local HD high definition video It makes camera high definition display at single image or less split screens Standard definition makes camera standard definition display at great many split screens The internet stream is applied on mobile phone and other equipments It guarantees image is smooth Area covering function hides some areas in video This function also be realized at preview or recording Operator can set relevant area to be hidden in video according to demand IP camera supports motion detection alarm Image adjustment function can adjust specification at contrast luminance
8. User Manual for IPClient System IPClient User Manual E NE TT i nN User Manual for IPClient System Contents O A tass ease kn tar 4 1 1 Brief Intro dui ecc 4 1 2 Operation Requirement rrroneonronvronrenrrnnrenreenennrenvennrennreneennesneenvenneensensseneensssnsensensssnsenvsnnenn 4 2 Operation and Usagi enGE iait 5 A EEE 3 2 2 Interface Introduction in 5 PAP R DIA ASE E ESN 6 2 3 AS EAN 6 2 3 2 Modify Device Connection ParamMeterS ooooooccnonnnonncnonononcnonnnonncnoncnon cnn nnon non ncnnn nono 7 2 3 3 Delete NN 7 ZA System Sene a E O GS EE 8 2 4 1 Channel Settings stan ne ae 8 DAD Record Setting codes a Be Biba do ed lO seed esta Ea etal Be Se NG 8 2 4 3 Alarm in amp out Setting ccecceescccsecesseseneceseeeeecesseeeeeceseceeseeeseeeseeeeeeseseneneceseeeeseesseees 8 2 4 4 Email Alert Settings saa ae ar Eee NE END RA AE REEL Der 8 2 4 5 USer IEA RN 9 A SV SUC cs ae SSG 9 2 5 Manual Recording Record All Record NONC ooocoocoonococonoonnoonoonocononnoo ccoo non ncnononncnnnnnos 9 20s Play back ek setts ee ee Er 9 F LT VAd GO ROUTE VE iio lt lo 9 2 6 2 Playback Controls shaded to helt a le a e 10 2 6 3 Save As and Cut Filerio isio narii AEAEE EEE AEAEE A 10 PS NN A I AA E PETEA Bee E E A A a 10 Zi ET 10 2 9 Minmze amp EKIN saa se DE 10 A A eee 11 3 1 Non sequence Preview ootu r E a R T A A T RA 11 32 Degun e preview ita MALE LAU ROLE SEES TENOR DES BEG 11 3 3 135 Ted AUS A A
9. ck whether or not the connection between computer and internet is correct then connect computer with IP camera and finally use IPClient search IP camera nN NE i nN
10. detected After the motion detection area is successfully set it will be automatically applied on IP camera Sensitivity default is 60 The greater the number is the higher the sensitivity is 4 6 Video Loss Alarm The IPClient software supports video loss alarm When network is connected successfully and IP camera s image is cut alarm will be triggered At present the output of video loss alarm supports sound playing electronic map appearing and E mail alarm 4 7 Network Connection When IP camera is added successfully it will be shown at the added equipment list There are many kinds of connection statuses which indicate status between IPClient software and IP camera If IP camera is connected successfully it will appear Already connected While if connection is failed it will shows Connection timeout When IP camera is being connected it will appear Connecting If there is mistake at password it will show Password error Double click Device dialogue box of video source setting will appear and then click Device Config the dialog box will appear Click Network it will appear dialog box When parameter modification is finished this modification will be applied on IP camera 4 8 Remote Setting The IP camera is a kind of standalone and embedded device It can be connected with CMS system WebCC system or other our company s CMS software And operator can also implement relevant remote setting
11. ease remember the password well If you forget the password please offer the serial number of the tip to our customer service staff And you will get the responding temporary password After modifying the password successfully right click the channel and select Device Config And then input the new password and click OK to connect again Click Network to pop up the dialog box DHCP function of network camera is default enabled Unable the function and input static IP address and other network parameters and click OK Then the modification will be applied to the network camera 2 3 3 Delete Device The monitoring image will be cut if the user deletes the device The network camera in Device Discovered List could be removed if the user click button in the middle of Device Management button to remove all cameras Users also could remove the camera 71316 1 User Manual for IPClient System of the responding channel through clicking Remove Channel in the right click menu in the main preview interface 2 4 System Setting 2 4 1 Channel Setting The modifications in IPClient Channel Setting could be applied to all cameras while the modifications in right click menu Remote Config are applied to one network camera only Click one channel set Stream Masking Channel Name Network Camera OSD OSD Location Enable Previewing Enable Pop up and click Apply to All to apply all the settings to a
12. eceiver Email ID If several Receiver separating Receiver Email ID by 5 8 H JE 16 H User Manual for IPClient System After setup complete click Send Test E mail to check if the mail can be sent or not If the mail was intercepted by anti virus software please close the anti virus software and restart the procedure 2 4 5 User Management This User Management is local user management manage IPClient User Name and Password Enter User Name and Password choose corresponding user power click Add User Support non login modifying and deleting operation of System User Choose a Username from System User Click Delete User to delete the user Choose a Username from System User re enter User Name and Password at the right textbox click Change User to change User Name and Password 2 4 6 System System setting options are as follows Choose Enable Scheduled Restart set up fixable automatic restart time While enable this function it will automatically choose Auto Run IPClient Choose Allow User to Switch Video Position choose a screen from main preview interface and press left mouse button drag to another screen to change the display channel When computer hardware configuration is low it will cause displaying not smooth recommend to choose Low Performance PC Mode l While connecting with 4ch IPC default to display via HD Stream Resolution 2 5 Manual Recording Record All Record None Click R
13. ecord All all normal connecting IPCs enable record recording file will be stored at corresponding folder of IPClient Computer Click Record None Manual recording and Scheduled Recording both are stopped 2 6 Playback Click Playback to enter into playback interface 2 6 1 Video Retrieve Choose date and corresponding channel default retrieving all channels automatically searching out video files click table head can descending or ascending arrange of video files according to channel start time size etc Ke NE nN User Manual for IPClient System 2 6 2 Playback Control While displaying the video support operation of Pause stop accelerate decelerate screenshot 2 6 3 Save As and Cut File We recommend to backup copy of important files click Save As to make the cop Click Cut File to cut file pop up as follows The point at current progress bar is the first default cut point drag the progress bar to another cut point click Finish to finish the file cutting 2 7 Snapshot Click Snapshot can capture pictures of target channel Right click Snapshot Management the pictures of manual snapshot or alarm automatic snapshot will be saved at E JdvrFile CapFile the user choose E as saved harddisk Choose date and channel and click search then will get pictures in the list right side 2 8 Layout The software provides a variety of screen splits and will automatically adjust
14. ffect will apply to all IP cameras 4 2 Image quality Image quality depends on resolution and video quality resolution decides image clarity video quality decides image delicateness Frame rate decides image fluency High resolution and video quality require a large network bandwidth and high hardware configuration of the computer To balance image quality and fluency the user can adjust image parameter Right click image and choose system configuration gt channel setting NE is on User Manual for IPClient System 4 3 Record plan After adding IP camera and show image successfully the user can do record setting IPClient software support three ways record manual record enable scheduled record alarm record Need manual open to start the manual recording Click record all Choose enable scheduled record and set up record period and it will start record accordingly Choose Alarm out gt start record it will start record when getting alarm and stop automatically based on the length of the delay time the alarm output module As follows are detailed steps Click system configuration gt record setting choose hardisk set the time of files packaged default half an hour According to the actual request choose record way and do operation and setting Enter into video playback to check if record successfully or not 4 4 Image display The IP camera resolution can be changed au
15. he higher PC hardware configuration needed B S NE Pius a User Manual for IPClient System 2 Operation and Usage 2 1 Login When running IPClient enter into the system main interface Default Username admin Default Password Null Tick Remember Password and no need to input password for next login After login users can modify the password of user admin or create new user by System Parameter gt User Management gt System User After login the system is defaulted to be locked and user can input password to operate If clicking the button Lock the system shall be locked 2 2 Interface Introduction The system interface is integrated by two parts The left part is for Control Panel and the HSH 16 R User Manual for IPClient System right part is for previewing If the cursor of the mouse is moved to the Below part the Control Panel shall be popped up and when he cursor of the mouse is moved away from the below part the Control Panel shall be hidden If clicking the button the previewing zone shall be full screen If clicking the system skin shall be changed Now the system supports two skins The Control Panel has following functions Icons Name Description Devices Search add and delete IP cameras Video shall be shown automatically if added successfully Settings Set the functions of resolution recording alarm etc and also the system _ environment can be set
16. ll cameras Click OK button to restore the modification or Cancel not to restore it The resolution of all the 3 kinds of stream is 16 9 which is as the same as the camera monitoring image original proportion and the image is much real 2 4 2 Record Setting Set the record file restoring drive letter here The root folder name of the record file is JdvrFile And the defaulted packing time is 30 minutes Pls select at least 2 store disks and use big hard drive When the disk space is not enough the defaulted solution is to overwrite previous records The record could be started regularly if enable scheduled record Select the record time range which is defaulted whole day Click Apply to All to apply the scheduled record setting to all cameras 2 4 3 Alarm in amp out setting Besides receiving network camera motion detection alarm IPClient supports video lost alarm if the user checks Enable Video Lost Detecting The user could select Start Record Alarm When Alarm Detected Snapshot When Alarm Detected E Map Pop up When Alarm Detected to receive the alarm info in time And the alarm output delay time is defaulted 10 seconds Note Alarm output of video lost does not support Snapshot When Alarm Detected or Start Record 2 4 4 Email Alert Setting As Enable Video Lost Detecting or Enable Motion Detect choose Sending Email When Alarm Detected then can get alarm information while alarming Email Alert Setting enter R
17. the number of them according to the number of the user s video source Support two ways of sequence single screen and quad screen one Support float window when it open 2 9 Minimize amp Exit 4 Click minimize will minimize window Click the desktop shortcuts or taskbar icon will maximize the window Click exit and will get picture Input the user name and password and click ok then exit program i o NH ls nN User Manual for IPClient System 3 Main preview 3 1 Non sequence preview Display images automatically after adding the devices Switch to the appropriate number of split screens according to the number of the devices 3 2 Sequence preview Click Layout and choose single screen sequence or quad screen sequence all the channels will be showed 3 3 Image status Each connected IP camera will be as a monitory point When see the video by IPClient the icon will be showed at the right bottom of the picture When the IP camera start motion detection and send the alarm to the user the icon will be showed at the right bottom of the picture 4 Image configuration 4 1 Image control To satisfy with each user personal requirement the software support the manual adjustment of image parameter Right click the image choose Image control The user can adjust image by himself Choose Apply to All and adjust brightness contrast saturation then click ok Exit The adjustment e
18. tomatically according to window size that can reduce decoding burden based on multi screen split HD stream display under windows maximized SD stream display under multi screen split the user can feel the image changing from SD to HD when double click 4 4 1 Resolution frame rate video quality Right click image gt Remote configuration 1 gt Btream gt Video land set up image resolution The resolution of HD stream amp SD stream decide the video quality good not the higher numbers of video quality the better image quality 4 4 2 Device OSD To differentiate the different IP cameras conveniently IPClient support named different IP cameras and the default name is in accordance with the channel HD IPC 01 36 which will show at the left bottom The channel name for each IP camera can be manually modified the maximum support of 16 characters 4 4 3 Video Covering This IPClient supports operator to set video covering area Check Enable Masking land click Region then the following dialog box will appear Operator can move mouse to select and set covering area If he click right button the selected area will be cancelled N NE 2 nN User Manual for IPClient System 4 5 Motion Detection This IPClient supports motion detection function Check Enable Motion Detect and click Region to select and set detection area If detection area is not set it will acquiesce full screen area is
19. way it will automatically adjust to split screen and make video recording and video displaying smooth to support much more channels video be displayed FAQ6 After IP camera s password is changed the changed password is forgotten Answer For the first time use it is suggested to change IP camera s user name and password Default user name is admin and default password is 123456 User should remember changed user name and password If user forgets changed user name and password and connection is failed IPClient s relevant window will show error sequence number At this time user should contact with our company s customer service staff and offer it 15 W JE 16 User Manual for IPClient System error sequence number to them in order to get temporary password After user use temporary password to login please change password in time and remember it FAQ7 IP camera is not searched at Searched Equipment List Answer The old version IP camera maybe is not searched by IPClient when use IPClient software to manage IP cameras In this case please ensure the IP camera is the latest one If it is old version IP camera which is not upgraded after purchased please connect it with internet and choose website upgrade User also can contact with our company s customer service staff to get the latest version IP camera software to upgrade them It it is the latest version IP camera and still not searched by IPClient please che

Download Pdf Manuals

image

Related Search

Related Contents

Z1900 User Manual  Opti R Bedienungsanleitung  MF Ring  Zimmerer- und Holzbauarbeiten  AOC 2217PWC Computer Monitor User Manual    - Microgate    UM10349 - NXP Semiconductors  APart SDX3T-SLV loudspeaker  

Copyright © All rights reserved.
Failed to retrieve file