EOSE™ Users Guide
Contents
1. Select Units Select Distance Units Feet Ft Meters M C Nautical Miles Ni amp Ft f Nautical Miles Mh Kilometers Km Distance 153 382 NM IC Select Azimuth Units Ce Degrees Radians Rad Azimuth 028 85 Figure 3 3 Select Units Distance and Azimuth EOSE User Guide 14 4 0 Tool Tabs There are three tool tabs on the right side of the DrawSpace Display These tools allow the user to select and Display different types of aviation facilities i e airways airports and DME facilities Search for specific facilities i e Dallas Love Field Tulsa VORTAC V 12 or Table Rock Heliport and Draw in the DrawSpace Display e Display Data The red tab opens the Display Data tool e Search Data The blue tab opens the Search Data tool e Drawing Tool The gold tab opens the Drawing Tool 4 1 Display Data The Display Tool is used to display airports runways heliports waypoints obstacles communications DMEs Radars Facilities Airways Boundaries and Modes The user may select the following checkboxes to display select up to four options for each item e Object Displays an item s location on the DrawSpace Display e Name Displays the name of the item on the DrawSpace Display e Range Shows the range coverage on the DrawSpace Display On DMEs facilities the service volume restrictions are shown e Color Al2. Entire Area ER Type 3 Surface nitial Inside Width gj BULL U Ft mu 600 0 FI nade Splay Angle L 15 0 Deg vas Inside Width EI 2000 0 Ft Azimuth oe Deg Length 7 406 NM Along Track Gradient 62 5 1 Cross Track Gradient o o dei Figure 8 9 Type 3 Surface Default Settings One Engine Inoperative OIS 66 EOSE User Guide 9 0 Keyboard Mouse ToolTip Functions Keyboard Functions e Ctrl Z function is basically an undo zoom function in the DrawSpace Display e When working in the Design Interface module press Enter on the keyboard at any time to build surfaces and perform an evaluation e When working in Turns window press Enter on the keyboard at any time to save current information Press Enter on the keyboard a second time to rebuild the surfaces Mouse Functions e Double mouse click the Display Data tab Search Data tab and Drawing Tool tab to close ToolTips e The ToolTip box displays relevant information regarding the item e Move the mouse over the items in the DrawSpace MDisplay to generate ToolTip data e Ctrl Left mouse click while displaying a ToolTip will lock the ToolTip into position on the DrawSpace Display To close the ToolTip click the X in the top right corner of the ToolTip e Multiple Item Tooltips When Items is displayed on the left side of the ToolTip it indicates there are multiple items overlaying each other Use the mouse wheel to display th
3. EOSE User Guide 8 4 1 Turns The Turns window and allow the user to establish turns within the OAA e Select Turn Allows the user to select a turn and then to either establish or modify the turn settings Ga Add Turn Allows the user to add turns to the surface Ld Hemove Turn Allows the user to remove turns from the surface Import Turn from RNAV Pro Flight Plan Allows the user to import a flight plan in a text txt format e Turn Start o Dist To Fly By Waypoint Allows the user to specify the distance at which the turn will commence e Turn Amount Three methods of identifying the direction of turn are o Change in the Heading window User enters 001 to 090 to specify the turn positive number represents a right turn a negative number represents a left turn o New Heading window User enters a heading in degrees to specify the turn Heading may be in True or Magnetic Get Heading via Mouse Click User selects a location on the DrawSpace Display with the mouse to specify the turn Latitudes and longitudes are automatically entered in the lat lon windows e Over Ride Default Turn Radius This checkbox allows the user to modify the turn radius data o Radius Specified in nautical miles o Speed Specified in knots o Bank Angle Specified in degrees e Save Saves the data entered in the Turn Settings window e Rebuild Builds the turn in the DrawSpace Display e Close Returns the user ba
4. Non Penetrating Obstruction Obstacles shown in green Slope Distance Black diagonal line across the window Terrain ToolTip Runway Center Line RCL terrain MSL Slope Distance The data is shown in the Data Bar at the bottom of the window Distance from DER Height Above DER and Altitude Figure 5 3 Profile View cont d 35 EOSE User Guide le z 035 0 2l 1547 U 100 e Left mouse click Add New Slope Change Icon and select a location on the DrawSpace Display with the mouse This will add a new row to the Distance and Slope column Enter values in the Distance and Slope windows Left mouse click the Build button in the Design Interface Module Left mouse click Remove Slope Change Icon and click on the vertical line in the DrawSpace Display with the mouse This will delete the line and remove the data from the Distance and Slope column e Left mouse click Move Slope Icon and click and drag vertical line to new location This will update the data in the Distance and Slope window Figure 5 4 Profile View cont d EOSE User Guide 100 36 5 3 Split View Tab The Split View Tab displays both the Top Down View and the Profile View All the features of the Top Down View and the Profile View are operational however the two windows operate independent of each other EC DrawSpace TM Display Mil EX TT Split views DN Profile view BH Top Down view Ht
5. North America projection is an Albers Egual Area Conic projection providing a relatively undistorted view of North America It provides no distortion along the standard parallels of N 29 deg 30 min and N 45 deg 30 min EOSE User Guide Am SIF GOs Am Runways A Heliports Llzer vVaypoints ler Object Mame Range Color LU H St 141 Hait NY NNN Figure 4 1 Airports Runways Heliports and Waypoints EOSE User Guide Z Comm Stations PF HE User Fr C Z DMEs RW 1 NDBDME D C A gl VOR DME wW NW T B VORTAC wW fw P TACAN mr l m ILS DME jw JW fw UserDMEs TD bi X Radars PF P HN asks Mk TIT HE ARSRS lw JW I MM User Radars IT F Figure 4 2 Comm Stations DMEs and Radars EOSE User Guide 20 5 Airways E W Jet Routes m Cal Victor Routes Il Ww Colored Routes Lr Gi Routes a Low Altitude Airway Fix FixType ARTCC BDRY Boundaries h ARTCC High At l ARTCC Low Alt lw e State lw Country Figure 4 3 Airways and Boundaries EOSE User Guide rawSpace TM Display e OL XI Ht PAR GA d rfr mum so 100 so VS i 8 Po o o Q o o i 8 f No Background ac d e EM o p Be oo Ka 1000 NM N L o Latitude N 79 51 43 30 Longitude W 53 3 47 03 oy Elevation 5 492 13 Ft 19 Distance N A ir Azimuth N A e iH DrawSpace TM Display OD spit view
6. Latitude Longitude Elevation MSL Type Replaces Stick 1 M32 53518 W 96 53 18 38 710 00 Ft Tower Mone 48 006924 45 006924 N 32 53 30 00 WY QB 52 46 00 600 00 Ft TOWER Disabled Obstacles Disabled Obstacles Obstacle ID Latitude Longitude Elevation MSL Type Es AVN 45 006924 M 32 53 3000 WV JE 52 46 00 575 00 Ft TOWER Figure 10 5 Obstacles EOSE User Guide 82
7. Open Allows user to open a previously Saved HTML file Save Opens a Save As window which allows user to save the Results as an HTML file Export as CSV Opens an Evaluation Results window which allows the user to export results as a CSV file Print Setup Opens a Page Setup window for the printer Print Preview Opens a Print Preview window Print Opens a Print window Close Closes the Result window e General Information section contains the following items O O O O O O O GQ O User Name User name is entered Software Name of the software is entered Version Software version which ran the evaluation is entered Date Date of the evaluation is entered Time Time the evaluation was run is entered Airport Central Airport name is entered AVNIS Database Current date of the database User Database Date database built by the EOSE user DYTED Level 1 Current date of the database e Engine Out Results section contains the following items O Departure Airport name and runway Surface Type Engine Out or Type 3 Minimum Reauired Climb Gradient Climb Gradient to clear the controlling obstacle Accuracy Code Applied or Not Applied Default Accuracy Code when N A 6E T7 EOSE User Guide Airplane Design Group The selected Airplane Design Group Distance to Airport Boundary The distance assigned by the user or the default distance of 1000 feet DER Disp
8. PAR GA 4 s sooo 1000 500 100 5 HM Latitude M 32 49 43 41 ET Longitude VW 96 44 53 24 D Ht 3 015 Q amp GA 4 we 50 25 10 5 1 CH Aspect 62 9 1 000 Ft aM x r a 1 t L l EI Distance From DER 2 966 08 Fr 0 Height Above DER 1 117 44 Ft EI Altitude 1 583 64 Ft EI Distance NIA Cai Azimuth MA war Figure 5 5 Split View EOSE User Guide 3 6 0 User Data User Data allows addition of new items in an EOSE database or to modify items in the AVNIS database e User Data window allows the user to Add Edit Delete and Clear database EOSE users may build their own database add and modify airports runways DMEs waypoints obstacles RADARs and radios nc ci Load Opens a Load User Database window to upload previously saved items in the user database Save Opens a Save User Database window to save an item to the user database Clear AIl Clears all data from User Data window and the DrawSpace Display Type This drop down menu allows the user to select the type data to add edit or delete Options include Airports Runways DMEs Waypoints Obstacles Radars and Radios New Opens a New User window and allows user to add an items to the user database Edit User highlights an item in the User Data window then clicks the Edit button to edit an item Delete User highlights an item in the User
9. boundaries of the OAA o Surface MSL Provides the height of the OAA surface in feet MSL at the mouse location This data is only provided within the boundaries of the OAA 55 EOSE User Guide o Surface AGL Provides the height of the OAA surface above ground level AGL at the mouse location This data is only provided within the boundaries of the OAA 56 EOSE User Guide Design Interface Database Screening Options f Obstacles DB f Obstacles USER kg DIED Surface Settings Surface Typ Ge Engine Out Engine Out Surfac Ce Terminate Slope Dist 45000 Ft From DER Teminate Slope AIL Ft Above DER Dist to Airport Boundary fi 000 0 Ft From DER M Add Half wing Span ta Surface Width Airplane Design Group Group Ae 214 Setup Turn s Set Surface Slopes Move Obstacles to Worst Case Location T Show Non Penetrating Obstacles l DI Results Build Z lt lt Pmewinuis Step Profile Distance From DER 34058 50 Surface MSL 1021 14 uu Height Above DER 42195 Surface AGL 544 94 Surface Data Figure 8 4 Surface Settings EOSE User Guide d Surface Yiew Mai E Top Down Not to scale l 200 l wingspan 42 wingspan I ronod Distance to Airport Boundary 300 ie wingspan DET gn Distance to Airport Boundary Figure 8 5 OAA Distance to Airport Boundary
10. Applications Welcome to your personalized view of your MetaFrame Presentation Server applications The Applications box contains icons for the applications that you can use Click an icon to launch an application Click Refresh to view the latest applications Click Settings to change your settings Click a folder icon to display its contents If you have problems using an application please contact your help desk or system administrator for more information For guestions contact support rnavpro com Message Center The Message Center displays any information or error messages that may occur ICA Client File Security Figure 1 1 EOSE User Guide BANGE Log into EOSE V ICA Client File Security EOSE Engine Out Surface Evaluator File View Database Window Help 1000 NM Latitude N 8 42 37 38 Im Longitude W 62 58 22 70 D Elevation N A W Distance N A ES Azimuth N A Eg Figure 1 2 EOSE Layout EOSE User Guide BEI D Design Interface Database Screening Option V Obstacles DB Obstacles USER DTED Airport Runway Settings Select Central Airport cr Displace DER 0 0 Ft DER MSL Ft JV Use Accuracy Code Specify Default E Design Interface KICT WICHITA MID CONTINENT Distance From DER N Surface MSL N Height Above DER N Surface AGL N 20 EOSE Menu Bar The Menu Bar contains drop down me
11. Data window then clicks the Delete button to delete an item Clear Clears items from the User Data window and the DrawSpace Display 38 EOSE User Guide E User Data PSI ES EOSE User Guide Er New Eg Edit E Delete Clear Figure 6 1 User Data Window 39 e New User Obstacle Allows the user to add edit delete or clear an obstacle in user database and to modify DOF obstacle The official DOF database is not actual modified only EOSE database The New User window functions are o Stay on Top This checkbox will Keep the New User Obstacle window on top of other windows which are opened Copy DrawSpace Item from Mouse Allows user to select a DOF obstacle from the DrawSpace Display to be modified o ID The Digital Obstacle File DOF identification number assigned by NACO or user assigns a name for User Database obstacles o Replace Allows the user to replace or modify a DOF obstacle o Type Describes the type of obstacle i e tower building smoke stack or pole o Latitude Longitude Allows Lat Lon entry via mouse or keyboard T Get lat lon from DrawSpace Allows user to select a location on the DrawSpace Display with the mouse o Elevation Obstacle elevation in feet MSL o Accuracy Code Allows user to enter Accuracy Code See FAA Order 8260 19 Appendix 2 Obstacle Accuracy Standards Codes and Sources for more detail o Enable Enables or disables the
12. General Information File Open Dave L a Export as CSV E a Print Setup User Name duncanrd Software EOSE Print Preview Print Version 1 03i Date 2 28 2008 Clase Time 12 42 37 AM AVNIS Database Date 02 08 2008 Used for Airparts Runways and Obstacles User Database Date 02 2008 Used for Obstacles DTED Level 1 Date 2002 Airport DALLAS LOVE FIELD Engine Out Results Engine Out Results Departure KDAL 31R Surface Type Engine Out Minimum Required Climb Gradient 338 8 FUMM Slope 17 9 1 Accuracy Code Applied Default Accuracy Code when NIA BE Airplane Design Group Graup 5 214 Distance to Airport Boundary 1000 0 Ft DER Displacement 1000 0 Ft DER Elevation 475 30 Ft Starting Distance 0 0 Ft Slopes Used Slope 62 5 1 Distance to Fly By Wapoint 10 000 0 Ft Change in Heading 30 00 Degrees New Heading 345 65 Degrees Turn Radius 1 4 MM Surface Termination Terminate Slope Dist 45000 Ft Turns Obstacle EDALDD1T 3 Latitude M 32 51 40 13 Longitude VW 96 51 36 59 Controlling Obstacle Fjavgtion MSL 512 00 Ft Type TREE Penetration 28 3 Ft Figure 10 3 File Menu General Information and Engine Out Results EOSE User Guide Top Down View 2 NM E 2008 ATSI AI rights reserved Imagery may be courtesy govemment agenci
13. See FAA Order 8260 19 Appendix 2 Obstacle Accuracy Standards Codes and Sources for more detail o As the mouse is moved over the DrawSpace Display the terrain elevation is shown at the bottom of the screen When mouse is displaying Level 1 data it will shows DTED 1 in parentheses 49 EOSE User Guide Design Interface Database Screening Uption Type TOWER s Elev DTED 1 780 8 ER Longitude VW 95 39 21 00 Elevation 1539 00 Ft Accuracy Code 4D Marked Y Name Verified Y em Elevation 1053 1 FE When the mouse arrow rolls over an obstacle the ToolTip shows the obstacle more detail When the mouse arrow is in the darker area the elevation shown Will be DTED Level 1 When the mouse is in the lighter area the elevation shown will be DTED Level 0 Notice the elevation box at the bottom of the DrawSpace Display Figure 8 1 Digital Terrain Elevation Data 50 EOSE User Guide 8 2 Airport Runway Settings e Select Central Airport This window allows the user to select Runway to be evaluated for possible obstacle penetration of the engine out slope e Display DER This window allows the user to set the distance to displace the DER o A positive number distance entered in the window will place the beginning point of the slope farther away from the runway end See Figure 8 3 o A negative number distance entered in the window will place the beginning point of the slope before t
14. be given a definitive name and entire groups may be moved using the Move Group tool When the checkbox associated with the group is selected the drawings from that group appear in the DrawSpace Display Item Type The user has multiple drawing shapes from which to choose they are Arc Circle Line Point Polygon Polyline Freeform and Text label ltem Name Allows user to name a drawing Lat Lon Square Button Allows the user to click on a location of the DrawSpace Display the latitude and longitude of the selected location is the center point of an Arc or Circle a point along a Polygon or Polyline or the beginning or ending point of a Line ol EOSE User Guide e Definition A Definition only applies to a circle or an arc in the DrawSpace ltem Editor For a Circle the radius is required for an Arc a radius and angle start and stop points are reguired e_ Style Allows the user to assign a line type color and width and fill feature for circles and polygons also allows the user to enter text e Expanded Description This feature is opened with a Windows style button which allows the user to expand the description of the item The expanded text appears in a ToolTip box on the DrawSpace MDisplay e Accept Accepts the entries made and closes the Add New Items to Group e Cancel Cancel entries and closes the Add New Items to Group 28 EOSE User Guide DrawSpace Items Editor EA Add New Items to Gr
15. for more detail e Database Allows the user to select between two databases the database selected will have the icon beside it a AVNIS Database Aviation System Standards Information System H NACO Database National Aeronautical Charting Office AVN 500 e Windows This menu repositions the Menu Bar DrawSpace Display and the Design Interface module into proper alignment I Reset Windows Realigns windows e Help This Menu has links to an Interactive Briefing User Manual and e mail hyperlink o Interactive Briefing Activates the Interactive Training LL User Manual Opens the EOSE Users Guide About EOSE Contains e mail address version and release date e Square Button functions are New Clears the DrawSpace Display for a new evaluation Load Settings Opens folder to load a previously saved esf file Save Settings Saves EOSE settings as an esf file Graphic Display Opens the DrawSpace Display when closed See paragraph 3 0 for more detail Display Data Opens and closes the Display Data tool See paragraph 4 1 for more detail oearch Data Opens and closes the Search Data tool See paragraph 4 2 for more detail K e E BOL Drawing Tool Opens and closes the Drawing Tool See paragraph 4 3 for more detail EOSE User Guide Interactive Profile Activates the Profile View tab which is located on the left side of the DrawSpace Display See paragraph 5 2 for more deta
16. 6 Search Data 25 EOSE User Guide 4 3 Drawing Tool The Drawing Tool is used to draw item on the DrawSpace Display The tool is layout with Groups and Items which contain square button and checkboxes The tool is opened by clicking on the gold tab e General The three general square buttons allow the user to manage the drawing files Drawings may be saved in a file folder and are saved as dso files Drawing Tool sguare buttons include E Clear All Clears the current Groups and Items in the Groups window and the items window La Open DrawSpace Object File Opens previously saved data from Groups and Items windows Save to DrawSpace Object File Saves data in the Groups window Items window and on the DrawSpace Display as a dso file e Groups The four groups square buttons allow the user to organize the drawing in the Groups window Groups may be given a definitive name and entire groups may be moved or deleted When a Groups checkbox is selected the items in that group will appear in the DrawSpace Display The functions of the Groups Square Buttons are a Create New Group Allows user to add a group to the Drawing Tool G Rename Group Allows the user to delete the group xX Delete Group Allows the user to rename the group More Groups Allows the user to move a group drawn on the DrawSpace Display a specified Distance and Bearing The user can select of distance from the following options nautic
17. 6 60 Ft Heading 135 54 DER Latitude M 32 50 31 35 DER Longitude Vy 96 SO 20 95 DER Elevation 486 70 Ft amp Length 7752 Ft Multiple Itemst B 3 idth 150 Ft DM n Surface CONC Figure 9 5 Multiple Items ToolTip EOSE User Guide 72 Turn End Point Drag to change Turn Heading and or Radius Alt Key Only Change Radius shift Key Only Change Heading 2 kemsa icr Fly By Waypoint Drag ta change Distance to Fly By Waypoint Figure 9 6 Mouse Function ToolTip Move Turning Point or Waypoint 73 EOSE User Guide 10 0 Results At the conclusion of the evaluation the Results PDF window will open to provide the user with the Results formatted as a PDF The user also has the option to view the result in an interactive format on the DrawSpace Display and Design Interface module Top Down View Interactive Results e The result of the evaluation shows penetration of the surface in red and Non penetrating obstacle within the surface in green e Moving the mouse within the DrawSpace provides Lat Lon and DTED information in the Data Bar at the bottom of the DrawSpace e Rolling the mouse within the Engine Out surface or Type 3 surface provides information in the Surface Data of the Design Interface module See paragraph 8 5 and 8 4 for more detail about Surface Data information Profile View Interactive Results e The result of the evaluation shows pen
18. 95 45 40 00 Elevation 1249 00 Ft Accuracy Code SE Digital Obstacle File Assigned Identification Marked with lights or paint Location verified by NACO EOSE User Database Obstacle built by user I d EET EN NE NL Fi MEWN phg fe e User OnDstz cle ID assigned by OC lc ID Stick 1 Type Tower Latitude N 34 11 38 13 Longitude vy 96 12 54 52 Elevation 1500 00 Ft Accuracy Code 4D Mame Horizontal tolerance 250 Vertical tolerance 50 Figure 9 3 Mouse Function and ToolTips 70 EOSE User Guide Controlling Obstacle ID KDALUD1 3 Type TREE Latitude M 32 51 39 98 Longitude Vy 96 51 35 43 Elevation 575 00 Accuracy Cade 14 Marked M Mame Verified Y Runway x 1709 61 Ft Runway Y 245 55 Ft Runway Z 38 40 Ft Minimum Required Climb Gradient Minimum Required Slope 44 52 1 Penetration 11 05 Ft Accuracy Code Adjusted 135 48 FMM X is the distance form the DER measured along track to a point perpendicular to the obstruction Y is the distance from the OAA centerline to the obstruction Z is the height of the obstruction above the DER evaluation Figure 9 4 ToolTip Continued EOSE User Guide 71 Slope Cha Mouse Wheel H z e Slope Change at Distance 0 00 to Slope 62 50 1 Multiple Items mm Mouse Whe THE Latitude M 32 51 25 19 THR Longitude Vy 96 51 24 48 THR Elevation 47
19. D pA d i d O BS EOSE User Guide Version 1 03 March 2008 E mes meee eect EOSE Users Guide Copyright 2004 Air Traffic Simulation Inc All rights reserved Applicable federal law and international treaties protect this software No portion of this software may be distributed or reproduced in any form without permission Violators may be subject to severe civil and or criminal penalties and will be prosecuted to the fullest extent allowed by law Air Traffic Simulation Inc HELP LINE 405 620 0809 EOSE User Guide Foreword EOSE is a straightforward yet robust automation tool that uses up to date data for airports runways and level 1 DTED terrain data It can be used in all phases of the development and evaluation of engine out procedures and allows the user to easily design a procedure to fit specific and unigue situation The tool reduces the traditionally labor intensive process to a logical and easy process it is highly flexible and allows the user to optimize the design by checking any desired what if scenario EOSE is a continually evolving product Software and user interface enhancements are frequently made to increase EOSE utility Consequently display examples in this Users Guide may vary slightly from actual displays observed while accessing EOSE via the Internet Neither the Federal Aviation Administration FAA nor any other parties involved in the c
20. Ez Profie view IB Top Down view we E DTED Terrain 1000 NM Latitude N 81 2 28 81 rn Longitude W 70 54 3 24 ES Elevation 3 146 33 Ft Ei Distance N A ET Azimuth N A ES H DrawSpace TM Display H Hi PAR QA 4 s sooo 1000 500 100 50 Top Down View I Spit view lE Profte view E Terrain amp Water Latitude N 18 32 16 65 mr Longitude W 60 59 27 57 EG Elevation N A mr Distance N A Azimuth N A mr Figure 4 4 No Background DTED Terrain Terrain amp Water 22 EOSE User Guide DrawSpace TM Display Blue Marble Latitude N 72 15 43 33 Longitude W 64 57 17 84 Ka Elevation N A UT Distance N A Azimuth N A mm Sectional Chart Latitude N 29 45 40 63 m Longitude W 97 55 55 38 Elevation 553 29 Ft DrawSpace TM Display DAR GR e 2 5000 1000 soo 100 50 Ea Split View Profile View EE Top Down View Water 750 NM Latitude N 53 40 6 82 mr Longitude W 112 56 24 03 Elevation 2 329 4 Ft mr Distance N A UT Azimuth N A Figure 4 5 Backgrounds Blue Marble Sectional Water 23 EOSE User Guide 4 2 Search Data The Search Data tool is used to search for specific airports runways waypoints DMEs radars and airways The tool is opened by clicking on the blue tab located on the right side of the DrawSpace Display When opened the following fields are displayed e Sea
21. IEN 54 H EOSE User Guide 9 4 1 BE LEE 59 8 5 Ree ler 62 9 0 Keyboard Mouse Tool ip FUNCTIONS tee 67 10 0 KEE 74 IV EOSE User Guide 1 0 Introduction EOSE provides an automated and self contained environment for engine out procedures The FAA s Flight Systems Laboratory Branch AFS 450 at the Mike Monroney Aeronautical Center in Oklahoma City Oklahoma have developed EOSETM EOSE is a secured Internet based application located at https fsl faa gov To obtain a user name and password please contact Help Desk E mail support atsi aero Phone 405 620 0809 Flight Systems Laboratory Branch AFS 450 Phone 405 954 7935 1 2 Locating EOSE EOSE is located on the Internet at https fsl faa gov The following Flight Systems Laboratory FSL Login Window appears when EOSE is accessed 1 3 Logging into EOSE Enter user name and password and press Log In at the FSL Login Window to log in to EOSE 1 4 Logging Out of EOSE Complete the following procedure to log out of EOSE e On the EOSE Menu Bar select File e Open the File menu and select Exit e The FSL Logoff Window appears Select the Log Off button The Login Window appears allowing login by you or others at a later time EOSE User Guide 1 5 ICA Client File Security Window This window may appear following the Login window and asks the user to choose from the following options e No A
22. Lon From DrawSpace icon and select two points on the DrawSpace Display with the mouse Click Find Distance Heading button Answer provided in the Distance and Heading windows Figure 7 1 Find Distance and Heading EOSE User Guide 45 Find Lat Lon Geo Calculator Vl w Fram Latitude N 32 53 27 54 W Longitude Iw 96 5416 78 0 Distance 5 Nautical Miles Heading 5 Degrees zl Latitude IN 32 5 amp 3 45 81 Longitude IA 35 50 25 24 Select the Get Lat Lon From DrawSpace icon and select a point on the DrawSpace Display with the mouse Enter a Distance and Heading in the appropriate windows Click Find Lat Lon button Answer provided in the Latitude and Longitude windows EOSE User Guide Figure 7 2 Find Lat Lon 46 Find Intersection zs Geo Calculator Line 1 Start Latitude N 32521018 O00 Longitude wa 22327 Ey 00 Line 1 End Latitude IN 32595117 0 Longitude worse m as Line 2 Start aa Latitude IN 32 59 2646 au Longitude M Se Ban 15 42 0 0 Ey Line 2 End Latitude IN 32595117 a Longitude w 6582868 000000 m Latitude 327 Longitude Get Lat Lon From DrawSpace Select the Get Lat Lon From DrawSpace icon and select four points on the DrawSpace MDisplay with the mouse Click Find Intersection button Answer provided in the Latitude and Longitude windows Figu
23. al miles feet meters or kilometers 26 EOSE User Guide Items The three Items square buttons allow the user to open the DrawSpace ltem Editor to add new drawing shapes and Edit or Delete the drawing shapes Or Add New Items to Group Opens the DrawSpace Item Editor and allows user to add a new draw shape to the Group selected Edit Items Allows the user to edit a specific drawing shape via the DrawSpace Item Editor TA Delete Items from Group Allows the user to delete a specific drawing shape from the selected group To display the drawing on the DrawSpace Display area select the checkbox in the Groups window The items in that group will appear Edit Items To modify an item first highlight the Group and Item in their windows and select the Edit square button The DrawSpace Item Editor will open This is the same window that was used to add the item originally Modify the item then click the Accept button The editor will close and the modified item will appear in the DrawSpace Display Delete Items from Group To delete a group or item highlight the group or item and click the Delete square button 4 3 1 DrawSpace Item Editor This tool is used to add and edit drawing shapes in the DrawSpace Display area When the checkbox associated with the group is selected the drawings from that group appear in the DrawSpace Display area Group Allows the user to organize drawings into groups Groups may
24. ation readout of the mouse location in DrawSpace Display It also provides Distance Azimuth when the Distance and Azimuth tool is activated e Latitude The latitude at the mouse location is displayed at the bottom of the DrawSpace Display Select Units window Allows user to choose degrees minutes and seconds degrees or radians e Longitude The longitude at the mouse location is displayed at the bottom of the DrawSpace Display crm _ Select Units window Allows user to choose degrees minutes and seconds degrees or radians e Elevation The elevation of the terrain at the mouse location is displayed at the bottom of the DrawSpace Display provided Digital Terrain Elevation data DTED has been loaded D Select Units window Allows user to choose feet or meters e Distance Displays the distance between two points identified via a mouse click hold and drag provided the Distance and Azimuth toolbar button has been selected rrr Select Units window Allows user to choose feet meters nautical miles and feet nautical miles or Kilometers e_ Azimuth Displays the azimuth in degrees true between two points identified via a mouse click hold and drag provided the Distance and Azimuth toolbar button has been selected Select Units window Allows user to choose feet or meters EOSE User Guide mm Longitude W 93 11 9 36 Wir Distance 115 1711 NM i Azimuth 073 95 INN
25. bled v Figure 6 3 User Wilde 43 EOSE User Guide 70 Geo Calculator e Find Distance and Heading Allows user to obtain a distance and heading from one point to another point See Figure 7 1 e Find Latitude Longitude The user selects a point on the DrawSpace Display with the mouse and entering a distance and heading the calculator provides the latitude and longitude See Figure 7 2 e Find Intersection Allows the user to enter latitude longitude to create intersecting line on the DrawSpace Display the calculator provides the latitude longitude of the intersecting lines See Figure 7 3 e Find Climb Gradient Allows the user to enter a slope and the calculator provides the Climb Gradient or visa versa Entering a distance the calculator provides the altitude of the slope at that distance See Figure 7 4 e Conversion The Calculator converts the following o Distances Feet Meters Nautical Mile or Kilometers o Latitudes Longitudes DMS Radians or Degrees o Weight Pounds Kilograms or Mass e Clear Current Clears the data entered in the windows 44 EOSE User Guide Find Distance and Heading ss Geo Calculator Fram Latitude N 32 53 2512 Longitude MN 8B 5414 27 0 CR EE Latitude N 3253 49 03 OO Longitude w gem 000000 ut Distance Nautical Miles e Heading 2 5 2 555 Degrees ka Get Lat Lon From DrawSpace Select the Get Lat
26. ccess Allows no read or write access to the user s computer e Read Access Allows only read access to the user s computer e Full Access Flight plan information can be read from and resultant Results information written to the user s computer e Select Full Access and Never ask me again for any application then click OK 1 6 EOSE Layout EOSE is layout with three major areas Menu Bar DrawSpace Display and the Design Interface module which provide a user friendly interface with the program e Menu Bar his has a series of selectable drop down menus and square buttons e DrawSpace Display includes a Toolbar mileage scale and Data Bar e Design Interface This module will help the user to set the parameters of the engine out and Type 3 surface evaluations EOSE User Guide FSL Tools Home of RNAV Pro Welcome Please log in User name duncanrd Password bass Advanced Options gt gt gt Hight Systems Laboratory To log in to MetaFrame Presentation Server enter the credentials required and then click Log In If you do not know your log in information please contact your help desk or system administrator Message Center The Message Center displays any information or error messages that may occur FSL Tools Home of RNAV Pro Applications 3 amp lt 5 RB H lt EOSE RNAV Pro Reset 1 03 2 32 Settings Welcome MetaFrame Presentation Server
27. ck to the Surface Settings window 59 EOSE User Guide Turn 1 Setting Turn Star Dist to Fly Du Waupomt Ft From DER Turn Amoun Ge Change in Heading Degrees fe T C New Headin x CM Get Heading Vue Mouse Click Latitude Longitude Override Default Turn Radius Turn Radius Radius 395442543 MM Speed 160 Bank Angle 7 Degrees alculate Figure 8 6 Turns 60 EOSE User Guide Turn Anon f Change in Heading 30 egrees fa T C OM Get Heading Via Mouse Click Latitude Longitude C Mew Heading 345 65 Turn Amour C Change in Heading 24 35 Degrees fe T Ce Mew Headin 340 CH Get Heading Via Mouse Click Latitude Longitude Turn amp maun C Change in Heading 148 4324 Degrees fe T Ge Mew Headin 4 0924 7 TER Get Heading Via Mouse Click Latitude N 32755 5814 __ Longitude W 35522337 Figure 8 7 Turn Amount EOSE User Guide 8 5 Type 3 Surface Type 3 Surface The default surface settings for Type 3 are established from the criterion in FAA Advisory Circular AC No 150 5300 13 Appendix 2 and Figure A2 4 which has no secondary area However the user may define surfaces with both primary and secondary areas and establish both Along Track Slopes in the primary area and Cross Track Slopes in the secondary area The example below defines an area with both a primary and seconda
28. e M 33 42 26 89 c9 Longitude W 94 12 51 03 VW Elevation 367 45 Ft E Distance 139 2984 MM E Azimuth 84 48 Ka Figure 3 1 DrawSpace MDisplay 10 EOSE User Guide 3 1 Toolbar The Toolbar allows the user to toggle grid visibility adjust zoom magnification zoom in and out recenter the display select a specific area to zoom move the visible area measure distance and azimuth and zoom to 50 100 500 1000 or 5000 nautical miles NM The Toolbar includes the following Grid Visibility A toggle button that displays latitude longitude grid when selected Zoom to working Area Allows the user to zoom in or out to the working area 1 5 Z00m Magnitude Allows the user to input magnification values larger than 1 0 and used in conjunction with Zoom In and Zoom Out H Zoom In Allows the user to zoom in by a value entered in Zoom Magnitude 2 Z00m Out Allows the user to zoom out by a value entered in Zoom ka Magnitude Recenter A toggle button that when selected recenters the display via a left click of the mouse e Area to Zoom A toggle button that when selected zooms in to an area Ti selected via a left click hold and drag of the mouse Moves the Visible Area A toggle button that when selected moves the display the distance and direction specified via a right click and drag of the mouse 2 Distance and Azimuth A toggle button that when selected measures the distance and azimu
29. e scroll through the additional items 67 EOSE User Guide EOSE User Guide ID KAL Mame DALLAS LOVE FIELD Latitude N 32 50 49 60 Longitude vu 96 31 6 40 Elevation 485 70 Ft RUunw ay Airport ID KOAL Number 31 K THE Latitude M 32 SU 31 35 THR Longitude vy 96 SU 20 95 THR Elevation 466 70 Ft Heading 315 65 DER Latitude M 32 51 26 19 DER Longitude vy 96 ST 24 45 DER Elevation 476 60 Ft Length 7752 Ft Width 150 Ft Surface COMC Figure 9 1 ToolTip Data 68 Latitude N 33 56 39 07 Longitude vw 96 23 30 51 Elevation boU 7D Maw Type v ORIDME Frequency 114 30 Low Class facility Class L Magnetic Variation Magar E 005 assigned the NAVAID WR EN UU FL WM ypoint ID OWL L Latitude N 32 57 33 21 Longitude vv 96 47 19 77 Type P Airport Surveillance Radar Range is 60NM Latitude N 52 33 57 04 Longitude vy 96 49 27 91 Elevation 637 UU Ft Figure 9 2 ToolTip Waypoints Obstacles DMEs and RADARs EOSE User Guide When Recenter square button is selected and the user attempts to use it as the Select Area to Zoom tool the following icon will appear When the mouse is released the tool bar will automatically toggle to the Area to Zoom tool hain dL 5 REM IEN m am ur ELLA J LR ID 40 001 680 Type TOWER Latitude M 34 32 17 00 Longitude Vy
30. es See product infor for details Profile View E 2008 ATSI Al nights reserved Imagery may be courtesy government agencies See product infor for details Figure 10 4 Top Down View and Profile View 81 EOSE User Guide Relevant Obstacles Relevant Obstacles Along Avail Rwy Penetration Obstacle Latitudes Elevation Trk Dist Length e M ID Longitude M5L Lat Reductinn Clearance Spe Dist Amt ti CG N32 51 40 13 AVN 709 6 Ft S9S0Ft 17 311 KDALOOTS gg 54 38 59 120 F UU 245 6 ER 1772 F 28 3 FI 34D FENM TOWER 48 N 32 53 30 00 User 13376 4 Ft O Ft 35 71 008924 waer 5246 00 00 071 Replaces g3328Fp 00042 Fp 19078 170 FUNM 08924 48 N 32 EIERE 97 AVN 32881 Ft 5434 Ft 38 714 014834 T wag 5158 47 2920 Ff 37 0F 2318 F SFT FI 166 FUNM 48 N 32 54 25 00 ANN 2D819 7 Ft 7752 Ft 114 641 I 008922 wager 534600 210 D FI 1712 9 ER 0 FD 145 2 Ft 54 FUNM 48 N 32 54 44 00 AVN 219341 Ft 7752 Ft 130 0 4 004878 w96 53 32 00 994081 77 768 FD 182 2 Ft 47 FUNM 48 N 37 5335 97 AVN 15582 8 Ft 7752 Ft 171 81 I 014559 w95 52 2447 93 0 FI Watt 1138 5 Ffi D Ff 158 6 Ft 35 FUNM 48 N 32 52 49 00 AVN 187354 Ft 7752 Ft 482 3 1 I 006926 wi gg 53 29 00 480 084 eg 1213 8 Ff 0 FD 233 1 Ft 13 FUNM User Obstacles User Obstacles Obstacle ID
31. es at specific points between DER and airport boundary The square buttons in the window are gd e Distance Slope Reset to Default Slope Resets the slope to the default of 62 5 1 slope for the entire distance Add New Slope Change Allows the user to add a vertical line ata Specific point in the interactive window Also adds the distance and slope to the Distance Slope Columns to the right side of the interactive window Remove Slope Change Remove a vertical line from the interactive window and removes the distance and slope from the Distance Slope Columns Move Slope Change Allows the user to grab the vertical line with the mouse and move the line to a new location The data in the Distance Slope Columns are also changed Distance This window allows the user to enter a distance in feet slope This window allows the user to enter a slope e Toolbar This is the same Toolbar which is in the Top Down view See paragraph 3 1 for more detail e Data Bar This is the same data bar which is in the Top Down view See paragraph 3 2 for more detail e Aspect Slide Bar The slide bar controls the aspect ratio for the profile picture The center position on the slide bar is a realistic representation of the slope and image as you move up the scale the presentation of the slope and image are exaggerated e DrawSpace Display The grid in the display area represents distance and altitude The ver
32. etration of the surface in red and Non penetrating obstacle within the surface in green e Moving the mouse within the DrawSpace provides Distance from DER Height About DER and Altitude information in the Data Bar at the bottom of the DrawSpace e Rolling the mouse within the DrawSpace provides information in the Surface Data of the Design Interface module See paragraph 8 5 and 8 4 for more detail about Surface Data information 74 EOSE User Guide Top Down View Ht PAR GA s 5000 1000 500 100 o 2 NM Le Latitude N 32 57 6 19 Longitude VW 96 49 35 51 LE Elev DTED 1 535 48 Ft rr Distance NIA WT Azimuth NIA a Surface Data dam Resul Distance Fram DER 14176 46 Surface MSL 7 L3 42 Height Above DER 22b 92 Surface AGL 23 95 Figure 10 1 Top Down View Interactive Results 75 EOSE User Guide Profile View GQ so 25 10 5 1 a Aspect DTN x AAR Distance From DER 4 379 04 EL OT Height Above DER 65 75 Ft Altitude 542 35 Ft 0 Distance N A 71 Azimuth N A S Surface Data P build Results lt Previous Step Profile Distance From DER 20046 62 Surface MSL zone cm Height Above DER 184 03 Surface AGL 320 75 Figure 10 2 Profile View Interactive Results EOSE User Guide 76 Result is created as a pdf document it contains the following parts e_ File This drop down menu has the following options O O
33. he existing DER See Figure 8 3 e DER MSL The MSL terrain elevation of the slope starting point is automatically entered e Use Accuracy Code The default accuracy code is 6E for any obstacle which has no accuracy code assigned However most obstacles in the DOF have an accuracy code assigned e Interactive Airport Diagram window This window allows the user to select a runway for the evaluation ToolTip information is provided as the mouse rolls over the runway end e Next Proceeds to the Surface Settings window 51 EOSE User Guide Airport Runway Settings Select Central Airport KDAL L isplace DER Ft DER MSL 476 6 Ft a w Use Accuracy Code Specify Default EE Select KDAL 31F KDAL DALLAS LOWE FIELD Nest Step Figure 8 2 Airport Runway Settings 52 EOSE User Guide Negative Distance Displace DER 1 DOO Ft DER M5L 477 30 FI Positive Distance Displace DER 1000 0 Ft DER MSL 475 30 FI Figure 8 3 Displacement of DER 53 EOSE User Guide 8 3 Surface Settings The Surface Type radial buttons allow the user to choose either Engine Out surface or Type 3 surface for an obstacle evaluation 8 4 Engine Out Surface Engine Out Surface Allows the user to enter surface termination point airport boundary data wingspan width surface slope and turns to the Obstacle Accountability Area OAA e Terminate Slope at Specified Dist Sets the
34. ical arcs The poles and the central meridian are straight lines half as long as the equator Mollweide projection is also called Babinet Elliptical Homolographic or Homalographic it is an equal area projection designed for small scale maps All parallels are straight lines and all meridians are equally spaced elliptical arcs The exception is the central meridian which is a straight line The poles are points Hammer Aitoff projection is a modification of the Lambert Azimuthal Equal Area projection The central meridian is a straight line half as long as the equator The other meridians are complex curves concave toward the central meridian and unequally spaced along the equator The equator is a straight line all other parallels are complex curves concave toward the nearest pole and unequally spaced along the central meridian Sinusoidal projection is also known as Sanson Flamsteed as a world map this projection maintains equal area despite conformal distortion Alternative formats reduce the distortion along outer meridians by interrupting the continuity of the projection over the oceans and by centering the continents around their own central meridians or vice versa A pseudo cylindrical projection where all parallels and the central meridian are straight The meridians are curves based on sine functions with the amplitudes increasing with the distance from the central meridian o Regional Projection which is available
35. il R Turns Opens the Turns window of the Engine Out module See paragraph 8 4 1 for more detail gt User Data Opens the User Data window See paragraph 6 0 for more detail LEE a Conversion Calculator Contains a Geo calculator See paragraph 7 0 for more detail Results Opens the evaluation Results window See paragraph 10 0 for more detail DEI EOSE User Guide File View Database Window Help File A New Bx Reload K K Load Settings 4 Save Settings 4 Import Turns from Flight Plan ll Exit View Ka Drawspace Display uM Display Data inl Search Data id Drawing Tool E User Data FAI Geo Calculator Interactive Profile e Turris 5 Results Figure 2 1 Menu Bar EOSE User Guide File View Database Window Help Database GA ANNIS MACO Window A Reset Windows Help ad Interactive Briefing LI User Manual 2 About Figure 2 2 Menu Bar continued EOSE User Guide 3 0 DrawSpace Display The DrawSpace Display includes a Toolbar which allows the user to maneuver around the DrawSpace Display and a data bar provides latitude longitude elevation and distance azimuth data e Toolbar See paragraph 3 1 for more detail e Data Bar See paragraph 3 2 for details e Mileage Scale Displays a mileage scale in the screen area Ht PAL GA s sooo 1000 500 100 E d m T LE Split wiew 4 Profile view Latitud
36. lacement N A or displacement value is entered Slopes Used Slope defaults to 62 5 1 beyond airport boundary Turns None or if applied turn data is entered Surface Termination Specific data is entered Controlling Obstacle The controlling obstacle details are listed Penetration is listed in red DrawSpace Display snapshot of the Top Down and Profile view showing obstacle results e Relevant Obstacles contains the following items O Obstacle ID The DOF identification number is listed or if the obstacle is from the User Database it will show the name given to the obstacle by the user Latitude Longitude Displays the latitude longitude of the obstacle location Elevation MSL Displays the elevation of the obstacle in MSL Type Accuracy Code Displays the type of obstacle and the accuracy code Along Track Distance The distance from the DER along the centerline of the OAA to a point perpendicular to the obstacle is shown in feet and tenth Available Runway Length This window shows two distances THR approach end of runway and DER Departure End Runway 9 THR The distances available for departure roll from the approach end of the runway Aircraft rotation at this distance and a climb gradient as shown in the Required Slope Climb Gradient column will clear the obstacle 78 EOSE User Guide DER If DER is zero the entire runway length is available for departure Unavailable runway distance is sh
37. led into the User Runway window Modify the desired runway item gt S oc SE S SE oco o Replace Allows the user to select an existing runway modify the runway data and use modified data in place of existing runway data o ID The four letter ICAO airport identifier and runway number o Threshold Arrival Departing End of Runway o Latitude Longitude The runway threshold latitude and longitude in degrees minutes seconds to the nearest hundredth 9 Elevation Threshold elevation in feet MSL Get lat lon from DrawSpace This button allows the user to select a location on the DrawSpace Display with the mouse O Heading The runway heading in degrees to the nearest hundredth o Length Runway length in feet o Width Runway width in feet o Surface Type of surface such as concrete asphalt grass dirt or water o Enable Enables or disables the program from using the runway data in the evaluation 42 EOSE User Guide Llser Data 0 ES Load H Save Ta Clear All Type Runways we JE em User Runway KDFW 13R Stay on Top v Airport ID KDFw Q w Replace E ID KDFW 13H Threshold Areal End of Fiunwa Latitude IN 32 54 34 47 Longitude w dq 48828 Elevation 590 90 Ft MSL d Threshold Departing End of Furia Latitude IN 32 53 2487 Longitude Iw JP 34779 Elevation 577 10 In MSL d Heading TRD l Length oam Ft width 150 P Surface CONC o 0 Ena
38. length of the OAA e Terminate Slope Alt Allows the user to enter an altitude above the DER The OAA length will be calculated based on the altitude multiplied by the slope e Distance to the Airport Boundary Sets the distance in feet from the start of the OAA surface to a point where the minimum half width becomes 300 feet See Figure 8 5 for more detail o Left mouse click on blue hyperlink will open the Surface View window which shows a top down view of the OAA o The distance between the DER and the airport boundary can be obtained from Airport Service or an Airport Layout Plan ALP o OAA criterion Reference FAA Advisory Circular AC No 120 91 Airport Obstacle Analysis Paragraph 11 e Add Half Wing Span to Surface Width This checkbox allows the user to select an Airplane Design Group from the drop down window below and add half the wingspan width to the OAA o Airplane Design Group This is a grouping of airplanes based on wingspan Reference FAA Advisory Circular AC No 150 5300 13 Appendix 17 Group 1 up to but not including 49 feet Group 2 49 feet up to but not including 79 feet Group 3 79 feet up to but not including 118 feet Group 4 118 feet up to but not including 171 feet Group 5 171 feet up to but not including 214 feet Group 6 214 feet up to but not including 262 feet gt lt o lt o lt lt o lt o 54 EOSE User Guide e Set Surface Slope Opens Profile View Tab See paragraph 5 2 f
39. lows the selection of color e Airports Allows the user to select and display airports in the AVNIS database and User Database Three options are provided for each item Object Name and Color Rolling the mouse over the airport in DrawSpace Display provides detail airport data e Runways Allows the user to select and display runways in the AVNIS database and User Database Three options are provided for each item Object Name and Color Rolling the mouse over the runway end in DrawSpace Display provides detail runway data e Heliports Allows the user to select and display heliports in the AVNIS database Three options are provided for each item Object Name and Color Rolling the mouse over the heliport in DrawSpace Display provides detail heliport data EOSE User Guide e Waypoints Allows the user to select and display Waypoints in the AVNIS database Three options are provided for each item Object Name and Color Rolling the mouse over the Waypoint in DrawSpace MDisplay provides detail data e Obstacles This section is opened and closed with left mouse click on the double arrows It allows the user to select and display obstacles listed in the AVNIS Database and User Obstacles database Three options are provided for each item Object Name and Color Rolling the mouse over the obstacle in DrawSpace MDisplay provides detail obstacle data e Comm Stations This section is opened and closed with left mouse click
40. nted as straight lines 9 Miller Equidistant is a projection that accurately preserves the distance between certain objects Miller s cylindrical equidistant projections with standard parallels at N S 37 deg 30 min provide minimal overall scale distortion when compared to other cylindrical equidistant projections 9 Robinson Projection is also called Orthophanic Robinson is a compromise projection used for world maps Pseudo cylindrical Meridians are equally spaced and resemble elliptical arcs concave toward the central meridian The central meridian is a straight line 0 51 times the length of the equator Parallels are equally spaced straight lines between 38 N and S spacing decreases beyond these limits The poles are 0 53 times the length of the equator o Conformal Projection which is available Q Mercator projection was originally created to display accurate compass bearings for sea travel Meridians are parallel to each other and equally spaced The lines of latitude are also parallel but become farther apart toward the poles The poles cannot be shown EOSE User Guide o Equal Area Projections which are available Tristan Edwards projection is a cylindrical egual area projection with the standard parallels of N S 37 383 degrees Eckert IV projection is an equal area projection used primarily for world maps Parallels are unequally spaced straight lines closer together at the poles Meridians are equally spaced ellipt
41. nus and square buttons which allows the user to maneuver through the software e_ File The menu has six options which are me Del New Clears the DrawSpace Display for a new evaluation Reload Allows the user to reload last the last evaluation Load Settings Opens folder to load a previously saved esf file Save Settings Saves EOSE settings as an esf file Import Turn from RNAV Pro Flight Plan Allows the user to import a flight plan in a text txt format Exit Allow the user to close EOSE e View The menu has nine options which are RI Ww E E EB B Graphic Display Opens the DrawSpace Display when closed See paragraph 3 0 for more detail Display Data Opens and closes the Display Data tool See paragraph 4 1 for more detail Search Data Opens and closes the Search Data tool See paragraph 4 2 for more detail Drawing Tool Opens and closes the Drawing Tool See paragraph 4 3 for more detail User Data Opens the User Data module and allows the user to add user data to an evaluation See paragraph 6 0 for more detail Geo Calculator Contains a Geo calculator See paragraph 7 0 for more detail Interactive Profile Opens the Profile View in the DrawSpace Display See paragraph 5 2 for more detail Turns Opens the Turns window in the Design Interface module See paragraph 8 4 1 for more detail EOSE User Guide Results Opens the Results window See paragraph 10 0
42. on the double arrows It allows the user to select and display communications stations listed in the AVNIS database and User database Four options are provided for each item Object Name Range and Color Rolling the mouse over the comm station in DrawSpace Display provides detail comm station data e DMEs This section is opened and closed with left mouse click on the double arrows It allows the user to select and display DME facilities listed in the AVNIS database and User database Four options are provided for each item Object Name Range and Color Rolling the mouse over the facility in DrawSpace Display provides detail facility data e Radars This section is opened and closed with left mouse click on the double arrows It allows the user to select and display Radar facilities listed in the AVNIS database and User database Four options are provided for each item Object Name Range and Color Rolling the mouse over the site in DrawSpace Display provides detail radar data e Facilities This section is opened and closed with left mouse click on the double arrows It allows the user to select and display non DME facilities listed in the AVNIS Database and User Obstacles database Three options are provided for each item Object Name and Color Rolling the mouse over the facility in the DrawSpace Display provides detail facility data e Airways This section is opened and closed with left mouse click on the double ar
43. or more detail e Setup Turns This hyperlink will open the Turns window and allow the user to establish turns within the OAA See 4 1 for more detail e Move Obstacle to Worst Case Location Once the OAA has been evaluated this checkbox moves all evaluated obstacles shown in the DrawSpace Display to a worst case location e Show Non Penetrating Obstacle Select this checkbox to show non penetrating obstacles in OAA The obstacles will be green and appear in the Top Down View area Profile View area and Result window Build Build Surface Builds the OAA according to selected settings Q Evaluate Evaluate Surfaces Starts the evaluation of the OAA or Type 3 Surface Show Results Opens the Results module See paragraph inus 10 0 for more detail lt lt Previous Step Previous Step Returns to the Airport Runway Settings window Profile Profile This button opens the Profile View Tab See paragraph 5 2 for more detail e Surface Data This data is located at the bottom of the Design Interface Module See Figure 8 4 As the user moves the mouse within the OAA in the DrawSpace Display the following data is displayed o Distance from DER Provides the distance in feet from the DER to the mouse location This data is only provided within the boundaries of the OAA o Height Above DER Provides the height in feet of the OAA surface above the DER at the mouse location This data is only provided within the
44. oup Draw5pace Item Editor NI Group Group HEI Line Item Type Circle Point Polygon Circle Falyline 700 Class TET T Freeform Mau ass E Test Label Lat Lon Latitude e Longitude wn EE y mma Line Color me Width Fil x SIE Lat lon Square Button Definition Accept Lancel Figure 4 7 DrawSpace Item Editor Add New Items to Group 29 EOSE User Guide Figure 4 8 Example of Drawing Tool Items EOSE User Guide 30 Moving Group X Bearing 0 z Accept Cancel Figure 4 9 Moving Group window EOSE User Guide 31 5 0 View Tabs There are three view tabs on the left side of the DrawSpace Display These tabs open and close a Top Down Profile and Split view in the DrawSpace Display 5 1 Top Down View The top down view is the same as the DrawSpace Display Toolbar Mileage scale and Data Bar are contained in the Top Down View DrawSpace TM Display NT Sy ies B tan Down LE Split view LE Profile view Latitude N 32 51 52 90 UT Longitude Vy 96 48 13 69 Di Elev DTED 1 580 71Ft i Distance NIA IN Azimuth NIA co Figure 5 1 Top Down View 32 EOSE User Guide 5 2 Profile View Tab The Profile View has five areas a Surface Slope window Toolbar Data Bar DrawSpace MDisplay and an Aspect Slide Bar e Surface Slope window Allows the user to set different slop
45. own as a negative number o Clearance This window shows distance in either green or red Numbers in Green The obstacle does not penetrate the engine out slope The distance the obstacle is below the slope Numbers in Red The obstacle penetrates the engine out slope The number of feet the obstacle penetrates the engine out slope o Required Slope Climb Gradient This is the required climb gradient or the slope need to clear the obstacle if aircraft rotation meet requirements in the Available Runway Length column o Along Track Distance Note Based on the obstacle accuracy code the software moves the obstacle to the closest point and adds the additional height to the obstacle to create a worst case scenario o Available Runway Length Note The runway length required will only ensure clearance of the specific obstacle shown in that row e User Obstacle contain the following items Obstacle ID Name given to the obstacle by the user Latitude Longitude Elevation Enter in feet MSL Type Describes the type of obstacle i e Tree Building or Tower Replaces None unless obstacle replaced then DOF ID entered O O OD 009 e Disabled Obstacles contain the following items Obstacle ID Name given to the obstacle by the user Latitude Longitude Elevation Enter in feet MSL Type Describes the type of obstacle i e Tree Building or Tower Database Type AVN O O 10 O O 79 EOSE User Guide File Menu and
46. program from using the obstacle in the evaluation If an item is disabled it will appear in the User Data Window in italics o ToolTip Rolling mouse over the Obstacle provides the user detail obstacle data 40 EOSE User Guide E Load 4 Save Ur Clear Type Obstacles latte AMMESSA Accuracy Code 25 2119 3t m 56 m MW oy de 39 00 EX OG C 3 Stick Two M sl 2353 5 W S3 231957 aud AL New User Obstacle x Stay an Top v m 4 4 ID 01 0002 v Replace mr 0002 Type TOWER Latitude Longitude Latitude IN 34 43 900 Longitude Di 06 35 42 00 Elevation 809 00 Ft MSL a Accuracy Code 40 Enabled v Figure 6 2 New User Obstacle window 41 EOSE User Guide e User Runway Allows the user to modify a runway at an existing airport The User Runway window functions are o Stay on Top This checkbox will keep the User Runway window on top of other windows which are opened o Airport ID The four letter ICAO airport identifier is entered here Copy DrawSpace Item from Mouse Use the following step Open Display Data tool and then select checkbox Runways Open User Data Module Open Type drop down window then select Runways Click New button to open the User Runway window Select Copy DrawSpace Item from Mouse In the DrawSpace Display mouse click on a runway end All runway data is fil
47. rch Request Window Allow the user to supply a specific item for which to search e Database checkboxes Allows the user to select databases Airports Runways Waypoints DMEs Radars and Airways in which to search for the item in the entry window BB Search Search button Initiates the search e Search Results window This window has four columns which displays the results of the search Left mouse click on each item provides the following functions e Item Name Shows item location with a yellow circle on the DrawSpace Display and provides ToolTip information in the Search Results window O Recenter On Shows item location with a yellow circle on the DrawSpace MDisplay and zooms to location F Draw ltem Shows item location with a yellow circle on the DrawSpace Display and draws item 7 Erase Item Erases item from DrawSpace Display Clear Clear Clears all the items in the Search Results window Draw AIl Displays all the items in the Search Results Draw window on the DrawSpace Display UDD List Drawn Shows only items that have been drawn on the DrawSpace Display and removes all items not drawn Cd Erase Al Erase All Erases all items located on the DrawSpace Display 24 EOSE User Guide ECAP Airport a KCRP 13 Runway G s RLFF 35 Runway for AC Yellow Circle Left mouse click on Draw Item icon places a momentary circle around the item location Figure 4
48. re 7 3 Find Intersection AT EOSE User Guide Find Climb Gradient Sol Geo Calculator Ratio 40 1 sl Climb Gradient 151 302425 Feet Distance 6076 Feet Altitude fi 51 911467 75 Feet Conversion i Geo Calculator View Distance From 6076 To 0 35938 Nautical Miles Figure 7 4 Find Climb Gradient and Conversion EOSE User Guide 8 0 Design Interface Module This module will help set up the screening and airport runway setting for the engine out surface evaluation and Type 3 surface evaluations 8 1 Data Screening Options There are three databases available for the engine out evaluation they are e Obstacle DB This checkbox activates the Digital Obstacle File DOF database which contains all manmade obstacle considered by National Aeronautical Charting Office AVN 500 to be significant to aviation e Obstacle User This checkbox activates all manmade obstacles which have been created by the user The User Data module is used to create save and modify obstacles for details see paragraph 2 2 e DTED This checkbox activates the Digital Terrain Elevation Data DTED EOSE displays both DTED Level 0 and DTED Level 1 See Figure 8 1 o When the user zooms into a distance of less than 50 miles EOSE M automatically changes to DTED level 1 o DTED Level 1 has a horizontal accuracy of 164 feet and 98 feet vertical accuracy or an Accuracy Code of 4E
49. reation or distribution of this program take any responsibility for the correctness of the data entered into this model or for the applicability of this model to any specific case It is the responsibility of the user to verify all data used by this model EOSE software and databases have been developed for use within the United States National Airspace System NAS Individuals requiring application software of a screening model outside of the NAS should contact Suppori atsi aero EOSE User Guide 1 0 1 2 1 3 1 4 1 9 1 6 2 0 3 0 3 1 3 2 4 0 4 1 4 2 4 3 4 3 1 9 0 5 1 5 2 5 3 6 0 7 0 8 0 8 1 8 2 8 3 8 4 Table of Contents HV OCU CUO Oi mME m 1 LOEN e CH REC YR AFU ONY EE RT NN RF Q 1 LOINC UO RE 1 KNM OUO EOQ SE TTT 1 ICA Client File Security Window se sees eee eee 2 EE Ak 2 EOSE MOD BOE usse EE E E NINE 5 DrawSpace Display eee ee 10 TOODA ERFYN T NWR FN FERN NF HNN ALW 11 BE gt UU WE FFF uu 13 TT 15 BLE AR E ee NT E 15 Search Data 24 WINE HY YF EE EN 26 DrawSpace Item Editor eee eee 27 VIN 32 Top Down View 32 PONE ew TaD DE 33 eeii Ae R eea a E E EAE E A 37 GADE uc E GO GY COG GY GN CG GO YN O GYG EN GYD OY GON M 38 1016 6 E E 44 Design Interface Module nennen 49 Reeg eine e le RE 49 Airport Runway Settings cccccccecccseececeeeeeseeeeseeeeeseeesesseeeseeeeesseeesaaeeesaeeeeeas 51 elt len e E 54
50. rows It allows the user to select and display Air Traffic Service ATS routes Jet Routes Victor Routes and Colored Routes contained in the AVNIS database Three options are provided for each item Object Name and Color Rolling the mouse along the route provides detail route data EOSE User Guide e Boundaries This section is opened and closed with left mouse click on the double arrows It allows the user to select and display high and low altitude ARTCC boundaries and State boundaries Rolling the mouse over the ARTCC boundary provides detail data e Modes This section is opened and closed with left mouse click on the double arrows It allows the user to select backgrounds and projections for the display area o Backgrounds which are available No Background DTED Terrain Terrain amp Water Blue Marble Sectional Chart and Water o General Projections which are available o Plate Carr e Projection is also known as Equirectangular Equidistant Cylindrical Simple Cylindrical or Rectangular In this projection the Polar Regions are less distorted in scale and area than they are in the Mercator projection The grid cells are perfect squares 9 Miller Cylindrfical Projection is similar to the Mercator projection except that the Polar Regions are not as areally distorted Meridians are parallel and equally spaced lines of latitude are parallel and the distance between them increases toward the poles Both poles are represe
51. ry area e Initial Inside Width The width of the primary area at the beginning of the surface e Initial Outside Width The width of the primary area at the outer most point of the surface e Inside Splay Angle The splay of the primary area e_ Outside Splay Angle The splay of the secondary area e Maximum Inside Width The width of the secondary area at the beginning of the surface e Maximum Outside Width The width of the secondary area at the outer most point of the surface e_ Azimuth The centerline of the surface area in degrees e Length The length of the surface in feet e Along Track Gradient The slope along the centerline of the surface e Cross Track Gradient A slope perpendicular to the centerline beginning at the edge of the primary area and terminating at the edge of the secondary area e Move Obstacle to Worst Case Location Once the Type 3 surface has been evaluated this checkbox moves all evaluated obstacles shown in the DrawSpace Display to a worst case location e Show Non Penetrating Obstacle Select this checkbox to show non penetrating obstacles in Type 3 Surface The obstacles will be green and appear in the Top Down View area Profile View area and Result window 62 EOSE User Guide J Bud Q Evaluate Results lt lt Previous Step Profile Build Surface Builds the Type 3 surface according to selected settings Evaluate Surfaces Starts the evaluation of the Type 3
52. surface Show Results Opens the Results module See paragraph 10 0 for more detail Previous Step Returns to the Airport Runway Settings window Profile This button opens the Profile View Tab See paragraph 5 2 for more detail e Surface Data This data is located at the bottom of the Design Interface Module See Figure 8 4 As the user moves the mouse within the Type 3 surface in the DrawSpace Display the following data is displayed o Distance from DER Provides the distance in feet from the DER to the mouse location This data is only provided within the boundaries of the Type 3 surface o Height Above DER Provides the height in feet of the Type 3 surface above the DER at the mouse location This data is only provided within the boundaries of the Type 3 surface o Surface MSL Provides the height of the Type 3 surface in feet MSL at the mouse location This data is only provided within the boundaries of the Type 3 surface o Surface AGL Provides the height of the Type 3 surface above ground level AGL at the mouse location This data is only provided within the boundaries of the Type 3 surface 63 EOSE User Guide EOSE User Guide 64 ealy Aiepuooos Secondary Area uwpe35urace Inside Splay Angle E Deg I gt Outside Splay Angle 15 0 Deg Figure 8 8 Type 3 Surface Settings 65 EOSE User Guide
53. th specified via a right click and drag of the mouse nn 100 soo 100 30 Z00m to x Nautical Miles Zooms to display the selected distance of 5000 1000 500 100 or 50 nautical miles DrawSpace Snap Shot This tool allows the user to take a picture of the screen area and save it as a File or Copy and Paste to a desired location Hide Tool Tabs This icon closes the Display Data tool Search Data tool and the Drawing Tool EOSE User Guide Left Mouse Functions Right Mouse Functions Ve ri Recenter Area to Zoom If either Recenter or Area to Zoom is selected the other button cannot be used lf one of these buttons is already selected selecting the alternate button will toggle off the previously selected button Pressing the Alt key in conjunction with a left click will perform the function associated with the non selected button Move the Visibility Area Distance Azimuth If either Move the Visible Area or Distance and Azimuth is selected the other button cannot be used If one of these buttons Is already selected selecting the alternate button will toggle off the previously selected button Pressing the Alt key in conjunction with a right click will perform the function associated with the non selected button Figure 3 2 Toolbar Recenter Area to Zoom Move the Visibility Area and Distance amp Azimuth EOSE User Guide 3 2 Data Bar The Data Bar provides latitude longitude and terrain elev
54. tical lines are distance and the horizontal lines are altitudes 33 EOSE User Guide lel Es DrawSpace TM Display H amma gA e asas 1 Tool Bar OD Los vie 6955 0 EIS ZU Surface Slope s Window gy OI je LANE Er wm il Ewe H H H L EY Ech in uL un uL uL y m TA m m m m m m m m m A Schi lr 4 P Wa SH A P Distance From DER 30 956 35 Ft Height Above DER 1 143 86 Ft Altitude 1 620 06 Ft unn Distance N A ET Azimuth NILE Data Bar e The Toolbar is across the top of the window See paragraph 3 1 for more detail e The Data Bar provides information as the mouse is moved within the DrawSpace Display o Distance to DER o Height Above DER o Altitude e he Aspect Slide Bar provides a more useable presentation of the slope and images Figure 5 2 Profile View EOSE User Guide Slope Distance Slope From 0 00 to 45 000 00 Ft Qo Ft REL Terrain 452 76 Ft 400 Fe TAMMY Ft AO Ft 300 Fe UU Fr t 1 000 Pt al Distance From DER 2 408 18 Ft Height Above DER 41 26 F Wi Altitude 517 36 Ft 77 Distance N A ri Azimuth N A WW Distance Vertical lines across the window are distances Altitude MSL Horizontal lines along the right side are altitude above DER Terrain Green line along the bottom terrain MSL Penetrating Obstruction Obstacles shown in red
Download Pdf Manuals
Related Search