Ultralux Torchiere User Manual
Contents
1. Plug the Compact Fluorescent Light Bulb into the 4 pin ballast inside the Shade 9 Plug the torchiere into any wall socket and turn the switch to your desired light level It may take several minutes for the bulb to reach full intensity O A WN KF Light Bulb Replacement 1 Turn off the switch and unplug the lamp 2 Pull out the Compact Fluorescent Light Bulb from the 4 pin ballast inside the Shade 3 Put in a new Compact Fluorescent Light Bulb Warning Do not touch the bulb when the lamp is on Always unplug the cord before replacing the bulb and allow sufficient time for the bulb to cool down Do not attempt to remove the white silicone or plastic material between the circular tubes of the bulb i Compact mH Fluorescent Light Bulb C aene eee aaae N Fi ae ls a Neck Top Pole Threaded Connector Middle i Pole SS Bottom Pole Base Full Soectrum Solutions 888 574 70142. UltraLux Dimmable Torchiere Black White or Gray Executive Models Bowl A Upper Pole C Switch Middle Pole D Lower Pole E Base F Full Soectrum Solutions Inc 888 574 7014 Full Spectrum Solutions a UltraLux Bronze Torchiere Assembly Instructions Item UCFT58BR Please be sure to read all warning instructions before using your lamp in order to ensure your safety and maximize lamp life Note The electrical wire is connected continuously through the poles Do not pull wires during unpacking as bad connections may result The assembly process Is much easier to complete when performed by two people WARNING DO NOT unscrew the Threaded Connector from the Top Pole Doing so may result in damage to the switch or the wiring pulling out of the switch Make sure the Top Pole and the Threaded Connector turn together as one Lamp Assembly Lay out the lamp parts on the floor as shown in the illustration Thread the Bottom Pole onto the Base Thread the Middle Pole onto the Bottom Pole Thread the Top Pole onto Middle Pole Hold on to the Shade then gently thread the Neck into the Shade Gently put the excess wire into the Top Pole 6 Turn the Neck and Shade counter clockwise at least two full turns so the wires are not twisted too many times during assembly Twisting the top of the lamp too many times may result in damage to the switch 7 Gently thread the Neck onto the Top Pole 8
Download Pdf Manuals
Related Search